본 연구는 작약의 품종간 개화시기 차이와 저온에서 장기 저 장이 가능한 품종을 선발하여 절화 유통 기간을 연장하기 위하 여 수행하였다. 작약 24품종을 대상으로 2022년 국립원예특작 과학원 시험포장에서 개화시기와 절화 품질을 조사하였다. 봉오 리 상태에서 수확한 작약을 건조 저장법으로 -1℃에서 60일 저장한 후 절화 수명과 절화품질을 조사하였다. ‘의성작약’은 홑 꽃이었고 나머지 품종은 겹꽃이었다. 개화시기는 5월 10일부터 18일 사이였으며, ‘Etched Salmon’, ‘Monsieur Jules Elie’, ‘Gilbert’, ‘Henry Bockstoce’는 개화일이 5월 10일로 가장 빨랐고, ‘Elsa Sass’는 5월 18일로 가장 늦었다. 식물체 키는 74.6∼107.8cm 였고, 절화 무게는 ‘Henry Bockstoce’ 품종 이 89.8g으로 가장 무거웠고, ‘Angel Cheeks’ 품종이 26.7g으 로 가장 가벼웠다. 꽃의 주된 색은 흰색, 빨강색, 분홍색, 자주색 이었다. -1℃에서 60일간 저장 후에 꽃과 잎의 상태가 아주 양 호한 품종은 ‘Kansas’, ‘Ole Faithful’, ‘Sonw Mountain’이 었다. 절화수명은 ‘Nick Shaylor’ 품종이 8일로 가장 길었고, 다음으로 ‘Blush Queen’, ‘Elsa Sass’ 품종이 7일이었으며, ‘Gilbert’, ‘Highlight’ 품종이 1일로 가장 짧았다. 작약은 저온 장기 저장에서 일부 품종을 제외하고는 꽃과 잎에 저온장해 증 상이 발생하였다. 이와같은 결과는 작약재배시에 품종 선택과 수확후 저온 장기 저장을 통하여 유통기간을 연장하고 하고자 할 때 기초자료로 활용될 수 있을 것으로 기대된다.

In this study, changes in the quality and headspace O2/CO2 concentrations of cubed radish (Raphanus sativus L.) kimchi (CR-kimchi) packaged using multilayer airtight film (MAF), half-area breathable film (HABF), partial area breathable film (PABF), and one-way degassing valve-mounted film (ODVF) were investigated during storage under altering temperature conditions. The total lactic acid bacteria count in CR-kimchi samples stored for 6 days at 0℃, followed by 8 days at 6oC, increased to 7.8-7.9 log CFU/g, regardless of the packaging. The titratable acidity of the CR-kimchi samples increased to 0.6-0.7% during storage at 0oC for 6 days and then at 6oC for 8 days; it was maintained at 0.6-0.8% for 32 days of storage at 3oC. After 46 days of storage, the reduced sugar content of CR-kimchi packaged using MAF, HABF, PABF, and ODVF decreased to 26.8-30.3 mg/g, indicating no significant (p>0.05) differences. However, during storage, headspace CO2 concentration and film volume were lower in the HABF treatment than in the control, PABF, and ODVF treatments, indicating that HABF packaging combined with supercooled (3oC) storage can extend the optimal ripening period of CR-kimchi without packaging expansion during storage.

본 연구는 계란의 품질 유지를 위한 온도변화의 영향을 평가하고 실제 유통 환경에서 난각에 Salmonella Enteritidis 가 오염된 비세척란의 적절한 온도 관리 방법을 결정하고 자 하였다. Salmonella Enteritidis가 접종된 비세척란은 총 7일간 25oC 항온보관 및 5가지의 다른 온도변화조건에서 보관하였다. 온도변화조건은 계란을 초기 25oC에서 보관 중 온도를 10oC 또는 35oC로 변화하였다. 보관 중 기실의 높이, 중량감소율, 비중 및 농후난백 비율을 1일 간격으로 평가하였다. 기실의 높이, 중량감소율, 비중은 25oC 보관 3일 및 4일차에 10oC로 온도를 낮추었을 때 초기값이 유 의적으로 보존되었다. 농후난백 비율은 초기 값과 비교하 였을 때 보관 조건에 따른 유의한 차이를 나타내지 않았 다. 이러한 결과는 25oC 보관 3일 및 4일차에 10oC로 낮 추는 것이 실제 유통 시 비세척란의 안전관리에 적합함을 시사하였다.

For the commercialization of hydrogen energy, a technology enabling safe storage and the transport of large amounts of hydrogen is needed. Porous materials are attracting attention as hydrogen storage material; however, their gravimetric hydrogen storage capacity (GHSC) at room temperature (RT) is insufficient for actual use. In an effort to overcome this limitation, we present a N-doped microporous carbon that contains large proportion of micropores with diameters below 1 nm and small amounts of N elements imparted by the nitrogen plasma treatment. The N-doped microporous carbon exhibits the highest total GHSC (1.59 wt%) at RT, and we compare the hydrogen storage capacities of our sample with those of metal alloys, showing their advantages and disadvantages as hydrogen storage materials.

In order to respond to environmental pollution, developed countries, including Korea, have begun to conduct research to utilize hydrogen energy. For mass transfer of hydrogen energy, storage as liquid hydrogen is advantageous, and in this case, the volume can be reduced to 1/800. As such, the transportation technology of liquefied hydrogen for ships is expected to be needed in the near future, but there is no commercialized method yet. This study is a study on the technology to test the performance of the components constituting the membrane type storage container in a cryogenic environment as a preparation for the above. It is a study to find a way to respond by analyzing in advance the problems that may occur during the shear test of adhesives. Through this study, the limitations of ISO4587 were analyzed, and in order to cope with this, the specimen was supplemented so that fracture occurred in the adhesive, not the adhesive gripper, by using stainless steel, a low-temperature steel, to reinforce the thickness. Based on this, shear evaluation was performed under conditions lowered to minus 243℃, and it was confirmed that the breaking strength was higher at cryogenic temperatures.

This study was carried out to determine the sprouting period of early and mid-season varieties, which includes ‘Atlantic’, ‘Chubaek’, and ‘Superior’, during the summer storage period in a semi-underground warehouse without cooling system. And also it was investigated the effect of chlorpropham [Propan-2-yl N-(3-chlorophenyl)carbamate, CIPC] treatment on the sprouting inhibition for the varieties. This study was conducted to figure out a sprout inhibitory effect when CIPC was applied to 1kg of the potato tubers at concentrations of 10 mg and 20 mg which are lower than the treatment concentrations of ca 30 mg prescribed by the positive list system (PLS). The internal temperature of the warehouse used in this experiment was lowered by 5°C or more than the outside temperature. The difference between the lowest and highest temperature during the experiment throughout the day was 5°C. It showed the effect of reducing to 1/2 of the difference in outdoor temperature. As for the sprouting of potatoes, the extremely early variety ‘Chubaek’ sprouts appeared at the 6th week of storage of control and it was the fastest sprouting potato among the control groups of the varieties. Sprouting began to appear in the Superior at the 6th week of storage, while the ‘Atlantic’ sprouted at the 8th week of storage. The appearance of sprouts was suppressed in all treatment groups of ‘Atlantic’ and ‘Superior’ varieties in CIPC treatments. Sprouts were observed in all treatment groups of ‘Chubaek’ after the 7th week, but the elongations of the sprouts in tubers were completely inhibited until the 8th week of storage. ‘Atlantic’ and ‘Superior’ seemed to have a sprouting inhibitory effect even with a low CIPC concentration of 10 mg·kg-1, with the exception of extremely early variety ‘Chubaek’ that breaks out of the dormancy quickly. Although weight loss occurred continuously during storage, it was minor loss of 0.7-1.6%. There was no consistent trend for changes of the loss in the varieties and CIPC treatments. Most common pathological disorder was the dry rot during the experiment, but only few were affected. The use of the tubers treated at 18°C and 90% RH for 10 days and the rack of refrigeration system which lead to lack of convection seemed to have suppressed the spread of pathogens.

수경 재배한 멜론의 생육과 수확 후 모의유통 시 품질 차이를 검토하였다. ‘루비볼춘추계’의 수경재배 된 멜론을 이용하여 저장 온도를 2℃와 5℃, 10℃, 20℃하여 모의유통 시 특성과 가용성고형물(SSC), 경도, 생체중 변화, 외관 등의 변화를 조사하였다. 멜론을 상온으로 유통하는 조건 하에서 저온저장에 따른 과실 특성을 본 연구에서 확인하였다. 멜론 저장 시 가용성고형물, 경도, 생체중, 외관이 저장온도에 따라 차이를 보였다. 가용성고형물은 멜론을 저온(2~5℃)에서 저장하여 모의유통 된 것이 상온(20℃)에서 다른 온도처리보다 높은 수준인 것으로 나타났다. 외관과 경도는 모의유통 중 저장 온도에 따른 영향이 지속적이지는 못하였지만 유통초기 저온(2~10℃) 저장이 외관 지수 및 경도 수치가 높은 경향이었다. 저장 온도에 따른 영향이 모의유통 시 계속 효과를 유지하지 못하여 국내 유통 시 이를 고려하여야 할 것이다. 본 연구 결과, 저장 온도에 따른 모의유통 중에 미치는 영향은 저장 직후 짧은 단기간에만 효과를 유지하여, 국내 유통 하에서 저장할 경우에는 바로 소비할 수 있도록 유도해야 할 것으로 생각된다.

This study evaluated the effect of lactic acid bacteria (LAB, a mixture of Enterococcus faecium and Lactobacillus plantarum) supplementation, the storage temperature, and storage period on the fermentation characteristics and in vitro ruminal digestibility of a total mixed ration (TMR). The TMR was prepared into two groups, namely, CON (control TMR without the LAB) and ML (supplementing a mixture of E. faecium and L. plantarum in the ratio of 1% and 2% (v/w), respectively). Both groups were divided and stored at 4°C or 25°C for 3, 7, and 14 d fermentation periods. Supplementing LAB to the TMR did not affect the chemical composition of TMR except for the lactate and acetate concentration. Storage temperatures affected (p<0.05) the chemical composition of the TMR, including pH, lactate, and acetate contents. The chemical composition of TMR was also affected (p<0.05) by the storage period. During in vitro rumen fermentation study, the ML treatment showed lower (p<0.05) dry matter digestibility at 24 h incubation with a higher pH compared to the CON. There was no difference in the in vitro dry matter digestibility (IVDMD) of TMR between the CON and ML treatment however, at 24 h, ML treatment showed lower (p<0.05) IVDMD with a higher pH compared to the CON. The effects of storage temperature and period on IVDMD were not apparent at 24 h incubation. In an in vivo study using Holstein steers, supplementing LAB to the basal TMR for 60 d did not differ in the final body weight and average daily gain. Likewise, the fecal microbiota did not differ between CON and ML. However, the TMR used for the present study did include a commercial yeast in CON, whereas ML did not; therefore, results were, to some extent, compromised in examining the effect of LAB. In conclusion, storage temperature and period significantly affected the TMR quality, increasing acetate and lactate concentration. However, the actual effects of LAB supplementation were equivocal.

흰점박이꽃무지(Protaetia brevitarsis seulensis) 유충을 사육상자(가로 543 × 세로 363 × 높이 188 mm) 안에서 뽕나무 발효톱밥 기반 사료 를 이용하여 집단으로 사육할 때(25°C, 16:8 L:D), 투입될 수 있는 갓 부화한 유충의 밀도를 검토하였다. 100-175마리 투입구는 90일후 생존율 이 80% 이상으로 사육밀도 사이에 차이가 없었다. 그러나 200마리 밀도에서는 생존율이 약 10% 이상 감소하였다. 100-150마리 밀도에서 유충 평균 무게는 처리 밀도 사이에 유의한 차이가 없었으나, 175마리와 200마리 밀도에서는 100마리 밀도에 비해 유충 무게가 유의하게 낮았다. 사 육밀도가 낮을수록 유충 무게가 더 빨리 증가하였다. 이상의 결과를 종합하여 100-150마리가 처음 투입밀도로 적절하다고 판단하였다. 두 번째 실험으로, 종령 유충을 저온에 보관하는 조건을 검토하였다. 종령 유충을 4개의 무게 집단(1.8-2.0, 2.0-2.3, 2.3-2.5, 2.5 g 이상)으로 구분하여 4, 8, 10°C에 보관하였을 때, 4°C에서는 70일 보관된 유충들은 무게에 관계없이 모두 사망하였다. 그러나 8°C에서는 70일 보관집단에서 약 80%의 유충이 생존하였다. 보관하는 유충의 무게가 무거울수록 생존율이 높았다. 4°C 보관에서는 무게가 2.3 g 이상인 유충을 50일까지 보관한 후 우화 한 성충들만 적은 수의 산란을 하였다. 8°C와 10°C 처리에서는 유충 무게에 관계 없이 모두 산란을 하였다. 이상의 결과로부터 무게가 2.3 g 이상 인 흰점박이꽃무지 종령 유충을 8°C에서 30-50일 범위에서 저장할 수 있다고 판단하였다.

The Alkali-Metal Thermal to Electric Converter (AMTEC) can be used as a next-generation power generation technology related with a large thermal energy storage. In particular, this technology is expected for the higher efficiency by a cascade power generation with the thermoelectric generator(TEG), and the temperature distribution becomes a very important design parameter in this case. In this study, the temperature distribution of the AMTEC unit was analyzed through CFD analysis, and design points were discussed based on the results.

The acoustic emission (AE) is proposed as a feasible method for the real-time monitoring of the structural damage evolution in concrete materials that are typically used in the storage of nuclear wastes. However, the characteristics of AE signals emitted from concrete structures subjected to various environmental conditions are poorly identified. Therefore, this study examines the AE characteristics of the concrete structures during uniaxial compression, where the storage temperature and immersion conditions of the concrete specimens varied from 15℃ to 75℃ and from completely dry to water-immersion, respectively. Compared with the dry specimens, the water-immersed specimens exhibited significantly reduced uniaxial compressive strengths by approximately 26%, total AE energy by approximately 90%, and max RA value by approximately 70%. As the treatment temperature increased, the strength and AE parameters, such as AE count, AE energy, and RA value, of the dry specimens increased; however, the temperature effect was only minimal for the immersed specimens. This study suggests that the AE technique can capture the mechanical damage evolution of concrete materials, but their AE characteristics can vary with respect to the storage conditions.

This study evaluated the Protaetia brevitarsis larvae powder’s characteristic changes using hot air drying (60±2.5oC, 12 h) with different pre-treatment methods, including two sacrifice methods, two storage temperatures, and two defatting processes. Appearance, yield, moisture contents, pH, color, proximate analysis, volatile basic nitrogen level, DPPH radical scavenging activity, and total phenol content were assessed. Results revealed that a combination of blanching, defatting, and -20oC storage temperature resulted in higher total phenol contents, lower water contents, and lower volatile basic nitrogen levels than other methods. Defatted treatment resulted in a higher L-value than the non-defatted treatment. Taken together, these results indicate that a combination of -20oC storage, blanching, and defatting is the optimal pre-treatment method for obtaining P. brevitarsis larvae powder with high total phenol content, low water content, and low volatile basic nitrogen, taking into account cost efficiency considerations.

To reduce the environmental burden caused by the disposal of spent nuclear fuel and maximize the utilization of the repository facility, waste burden minimization technology is currently being developed at the Korea Atomic Energy Research Institute (KEARI). The technology includes a nuclide management process that can maximize disposal efficiency by selectively separating and collecting major nuclides in spent nuclear fuel. In addition, for efficient storage facility utilization, the short-term decay heat generated by spent nuclear fuel must be removed from the waste stream. To minimize the short-term thermal load on the repository facility, it is necessary to separate heat generating nuclides such as Cs-137 and Sr-90 from the spent fuel. In particular, Sr-90 must be separated because it generates high heat during the decay process. KAERI has developed a technology for separating Sr nuclides from Group II nuclides separated through the nuclide management process. In this study, we prepared Sr ceramic waste form, SrTiO3, by using the solid-state reaction method for long-term storage for the decay of separated Sr nuclides and evaluated the physicochemical properties of the waste form. Also, the radiological and thermal characteristics of the Sr waste form were evaluated by predicting the composition of Sr nuclides separated through the nuclide management process, and the estimation of centerline temperature was carried out using the experimental thermal data and steady state conduction equation in a long and solid cylinder type waste form. These results provided fundamental data for long-term storage and management of Sr waste.

본 연구에서는 참외과실의 수확후 식용왁스코팅처리가 과실품질 및 과골 갈변에 미치는 대사체의 변화를 분석하였다. 코코넛 오일과 밀랍 (9:1 w/w) 처리를 참외 과실표면에 코팅 후 실온 저장 7일후에 과실 품질, 에틸렌 발생량 및 호흡량을 조사하였다. 그 결과, 참외의 경도와 골갈변도는 식용코팅처리된 과실과 무처리군 사이에 유의한 차이는 없었다. 하지만, 과피색의 명도(L*), 순도(a*), 및 색상각(hue angle)은 식용왁스처리군이 무처리군에 비해 유의한 차이가 있었다. 이는 호흡량 및 에틸렌 발생량이 식용왁스처리에 의해 유의하게 낮아져 과피색이 유지된 것으로 생각된다. 식용왁스 처리에 의한 참외의 대사체 변화를 분석한 결과, gamma-aminobutyric acid, aspartate 그리고 myo-inositol 대사가 가장 유의적인 차이를 나타났으며, 특히 삼투보호제 역할을 하는 alanine, 가바(GABA)성분이 식용왁스코팅에 의해 증가하였다. 따라서, 식용왁스코팅처리는 호흡과 에틸렌 발생의 억제, 수분 스트레스 경감 등을 통해 참외의 선도 유지를 유도한 것으로 판단되며, 참외 과피색 변화 억제 등 상품성 향상에 활용될 수 있을 것으로 보인다.