This study was conducted to find a way to improve quality by observing changes in quality and microbial communities according to whether corn silage was treated with additives and the storage period, and to utilize them as basic research results. The experimental design was performed by 2˟4 factor desigh, and the untreated (CON), and the additive inoculated (ADD) silage were stored and fermented for 30 (TH), 60 (ST), 90 (NT), and 120 (OHT) days, with each condition repeated 3 times. There was no change in the nutrient content of corn silage according to additive treatment and storage period (p>0.05). However, the change in DM and the increase in the relative proportions of lactic acid content and Lactobacillales according to the storage period (p<0.05) indicate that continuous fermentation progressed until OHT days of fermentation. Enterobacterales (33.0%), Flavobacteriales (14.4%), Sphingobacteriales (12.7%), Burkholderiales (9.28%) and Pseudomonadales (6.18%) dominated before fermentation of corn silage, but after fermentation, the diversity of microorganisms decreased sharply due to the dominance of Lactobacillales (69.4%) and Bacillales (11.5%), Eubacteriales (7.59%). Therefore, silage maintained good fermentation quality with or without microbial additives throughout all fermentation periods, but considering the persistence of fermentation even in long-term storage and the aerobic stability, it would be advantageous to use microbial additives.

최근 국내에서 개발된 송풍식 양파 줄기절단기를 수확기 양 파 엽 절단에 활용할 경우 적정 작업 조건을 구명하기 위해서 이 실험을 수행하였다. 처리구 중 식물체 엽 건조가 가장 많이 진행된(엽 건조 정도 : 66.3%, 엽 수분함량 : 50.5%) 6월 20일 엽 절단 처리구에서 평균 잔여 엽장은 6.7±3.5cm로서 작업 후 적정 잔여 엽장에 해당되는 범위인 4－10cm에 포함되므로 기계 엽 절단 성능이 처리구 중 가장 우수한 것으로 판단된다. 줄기절단기 이용 양파 엽 기계 절단 시 평균 작업 속도는 0.17m·s-1였는데, 이는 인력 엽 절단 처리구의 평균 작업 속도 인 0.05m·s-1보다 3.4배 정도 빨랐으며, 이를 통해 해당 기종 을 이용하여 10a 면적을 작업할 경우에는 인력 작업(1인 기준) 에 비해 2.6시간 정도를 절감할 수 있을 것으로 기대된다. 또한 기계 엽 절단 처리구에서의 손상구 발생률은 1.3%로서 인력 엽 절단 처리구의 0.0%에 비해 높았는데, 이로 인해 기계 엽 절단 처리구가 인력 엽 절단 처리구보다 저장 중 양파 구 부패 율이 평균적으로 높았던 것으로 판단된다. 처리별 저장 특성 을 살펴보면, 저장 8개월 후 구 부위(기부, 정부)별 부패율은 기계 엽 절단 후 잔여 엽장이 5.0cm 미만인 처리구에서 잔여 엽장이 5.0cm 이상인 처리구보다 높았다. 이는 잔여 엽 길이 가 5.0cm 미만인 처리구에서는 5.0cm 이상인 처리구보다 저 장 중 구 부패를 유발하는 병원균의 감염이 쉬우므로 장기 저 장 시 부패율이 높은 것으로 생각된다. 본 실험 결과와 실험 기 종의 성능 목표(작업 후 잔여 엽장 : 5cm) 및 양파 수확 시 적정 잔여 엽장에 관한 기존의 연구결과 등을 종합적으로 고려할 경우, 본 실험에 사용된 줄기절단기 이용 양파 엽 절단 시 양파 의 적정 잔여 엽장은 5－10cm 정도일 것으로 판단된다.

Mg81Ni19-8wt.% REO (oxides of Lanthanum and Cerium) alloys were successfully prepared using mechanical alloying method with Mg-Ni alloy and REO powder. Phase analysis, structural characterization, and microstructure imagine of the alloys were conducted using X-ray diffraction (XRD), metallurgical microscope, and transmission electron microscopy (TEM) methods. Multi-phase structures, including the primary phase of Mg2Ni and several secondary phases of Mg + Mg2Ni, MgNi-LaO, and MgNi-CeO, were found in in the as-cast Mg81Ni19- 8wt.% REO alloys. XRD and TEM results showed that Ce exhibits variable valence behavior at various stages, and the addition of REO promotes the nanocrystalline of the alloy. The hydrogen absorption capacity of ball-milled Mg81Ni19 and Mg81Ni19- 8wt.%REO alloy for 2 h at 343 K is 1.34 wt.% and 1.83 wt.%, which are much larger than 0.94 wt.% of as-cast Mg81Ni19 alloy. The addition of REO led to a decrease of the thermal decomposition temperature of the alloy hydride by approximately 20 K and a reduction of the activation energy of the hydrogen desorption reaction by 10% and 13%, respectively.

In nuclear fuel development research, consideration of the back-end cycle is essential. In particular, a review of an in-reactor performance of nuclear fuel related to the various degradation phenomena that can occur during spent fuel dry storage is an important area. The important factors affecting the degradation of zirconium-based cladding during dry storage are the cladding’s hydrogen concentration and rod internal pressure after irradiation. In this study, a preliminary analysis of the in-reactor behavior of the HANA cladding, which has been developed and is currently undergoing licensing review, was performed, and based on this result, a comparative analysis between nuclear fuel with HANA cladding and current commercial fuel under storage conditions was performed. The results show that the rod internal pressure of nuclear fuel with HANA cladding is not significantly different from that of commercial cladding, and the hydrogen concentration in the cladding tends to reduce due to the increased corrosion resistance, so fuel integrity in a dry storage conditions is not expected to be a major problem. Although the lack of cladding creep data under dry storage conditions, the results from the Halden research reactor test comparing in-reactor creep behavior with Zircaloy-4 showed that there is sufficient margin for degradation due to creep during storage.

The purpose of this study was to investigate the effects of sterilization, storage period and washing yuzu, according to the washing method, during the storage period. The results showed that the fungus size increased as the storage period increased, and no mold occurred in the yuzu washed with ozone water until 20 days. After 30 days of storage, a mold of 124.1±13.9 mm2 was observed. The no-treatment sample had a fungus of 814.5±72.8 mm2 in size on day 0 and the fungus the largest fungus was 6,362±636.7 mm2 on day 30. In the case of water treatment, the fungus was 286.4±31.5~4,836.4±484.6 mm2 in size. The results of the study confirmed that washing yuzu with ozone water has a sterilizing effect.

Integrity evaluation scheme for Spent Fuel (SF) dry storage has been developed under transportation failure modes. This method especially considered the degradation characteristics of Spent Fuel (SF) during dry storage such as radial and circumferential hydride content, hydride volume fraction, oxide thickness, etc. Hydride and zircaloy cladding are considered as material composite system, using correlation models related to material properties. Critical Strain Energy Density (CSED) is compared with Strain Energy Density (SED), to evaluate cladding integrity. CSED serves as material characteristics, while SED can be considered as boundary condition. To calculate the CSED of cladding in the lateral failure mode, circumferential hydride concentration is used. SED is calculated considering both the bending moment and axial load. On the other hand, in the longitudinal failure case, fuel rod temperature, internal pressure, hoop stress, radial hydride concentration is used to calculate CSED. And pinch force (contact) was considered to evaluate SED. Model validations were conducted by comparing hot cell SF test and existing validated evaluation results. To separately handle normal transportation conditions from hypothetical accident conditions, SED according to stress-strain analysis results was separated into elastic and plastic regions. As a result of applying this scheme for 14×14 SF, failure probability of normal condition was zero, which is the similar result with DOE and same with EPRI. Regarding accident condition, lateral case showed similar result, but longitudinal case showed different but reasonable result, which was due to the different analysis conditions. The proposed methodology which was indigenously developed through this study is named as K-method.

This study evaluated the effect of lactic acid bacteria (LAB, a mixture of Enterococcus faecium and Lactobacillus plantarum) supplementation, the storage temperature, and storage period on the fermentation characteristics and in vitro ruminal digestibility of a total mixed ration (TMR). The TMR was prepared into two groups, namely, CON (control TMR without the LAB) and ML (supplementing a mixture of E. faecium and L. plantarum in the ratio of 1% and 2% (v/w), respectively). Both groups were divided and stored at 4°C or 25°C for 3, 7, and 14 d fermentation periods. Supplementing LAB to the TMR did not affect the chemical composition of TMR except for the lactate and acetate concentration. Storage temperatures affected (p<0.05) the chemical composition of the TMR, including pH, lactate, and acetate contents. The chemical composition of TMR was also affected (p<0.05) by the storage period. During in vitro rumen fermentation study, the ML treatment showed lower (p<0.05) dry matter digestibility at 24 h incubation with a higher pH compared to the CON. There was no difference in the in vitro dry matter digestibility (IVDMD) of TMR between the CON and ML treatment however, at 24 h, ML treatment showed lower (p<0.05) IVDMD with a higher pH compared to the CON. The effects of storage temperature and period on IVDMD were not apparent at 24 h incubation. In an in vivo study using Holstein steers, supplementing LAB to the basal TMR for 60 d did not differ in the final body weight and average daily gain. Likewise, the fecal microbiota did not differ between CON and ML. However, the TMR used for the present study did include a commercial yeast in CON, whereas ML did not; therefore, results were, to some extent, compromised in examining the effect of LAB. In conclusion, storage temperature and period significantly affected the TMR quality, increasing acetate and lactate concentration. However, the actual effects of LAB supplementation were equivocal.

This study investigated the changes in fruit quality characteristics and how they correlated with the storage conditions and storage period. The firmness of peaches stored in cold storage decreased rapidly after 14 days (13.0 N), but the firmness of peaches stored in CA storage remained high for 28 days (20.9 N). The titratable acidity of peaches stored in cold storage decreased rapidly from 0.23 to 0.26% after 21 days, but there was no change until 7 days for peaches stored in CA storage, and then it decreased to 0.23% after 28 days. The soluble solid content increased significantly as the storage period elapsed under cold storage, but there was no notable difference for CA storage. After 28 days of storage, the weight loss rate of peaches stored in CA storage(8%) was lower than peaches stored in cold storage( 23%). The was significant background color for peaches stored in cold storage after 7 days, and changed to a completely different color after 28 days of storage. As for the correlation between the quality characteristics of peach fruits stored at low temperatures, weight loss rate, sunny side ΔE value, background color lightness, background color redness, and ΔE value showed high correlations, and CA storage showed high correlations with weight loss rate and coloration. In conclusion, according to our study results, 'Kunika' peaches can be stored for 14 days in low-temperature storage and up to 28 days in CA storage, and it is thought that the weight loss rate, firmness, and coloration during storage can be used as factors for quality prediction.

To predict the quality of Fuji apples, this study investigated the characteristics and correlations of their fruit quality according to storage method and storage period. Fuji apples were stored in cold storage at 0oC for 250 days with no treatment, with 1-MCP treatment, and under controlled atmosphere (CA) storage. According to the storage method, the weight loss was the lowest in the CA-treated group (3.43%) until 250 days, and the change in fruit firmness was the least in the 1-MCP group. The titratable acidity remained above 0.2% for 1-MCP and CA storage until 250 days and decreased to 0.1% for cold storage. The principal component analysis showed a difference in quality between the 1-MCP group, CA group, and cold storage group after 200 days of storage. Six types of volatile components were commonly detected in all storage methods, while three types of independent components with a low threshold were detected in 1-MCP. Weight loss, titrable acidity, and firmness were highly correlated with physicochemical quality, and CA storage was judged to be a long-term storage technology that satisfies consumers’ tastes by maintaining excellent flavor and quality.

To minimize the short-term thermal load on the repository facility, heat generating nuclides such as Cs-137 and Sr-90 should be separated from the spent nuclear fuel for efficiency of repository facility. In particular, Sr-90 must be separated because it generates high heat during the decay process. Recently, Korea Atomic Energy Research Institute (KEARI) is developing a waste burden minimization technology to reduce the environmental burden caused by the disposal of spent nuclear fuel and maximize the utilization of the disposal facility. The technology includes a nuclide management process that can maximize disposal efficiency by selectively separating and collecting major nuclides such as Cs, Sr, I, TRU/RE, and Tc/Se from spent nuclear fuel. Among the major nuclides, Sr nuclides dissolve in chloride phase during the chlorination process of spent nuclear fuel and recovered in the form of carbonate or oxide via reactive distillation. In this process, Ba nuclides are also recovered along with Sr nuclides due to their chemical similarity. In this study, we prepared group II nuclide ceramic waste form, Ba(x)Sr(1-x)TiO3 (x=0, 0.25, 0.5, 0.75, 1), using the solid-state reaction method by considering the various ratio of Sr/Ba nuclides generated from nuclide management process. The established waste form fabrication process was able to produce a stable waste form regardless of the ratio of Sr/Ba nuclides. To evaluate the stability of group II waste form, physicochemical properties such as leaching and thermal properties were evaluated. Also, the radiological properties of the Ba(x)Sr(1-x)TiO3 waste forms with various Sr/Ba ratios were evaluated, and the estimation of centerline temperature was carried out using the experimental thermal property data. These results provided fundamental data for long-term storage and management of group II nuclides waste form.

본 연구는 기능성 물질인 알로에를 종류별로 첨가함에 따라 유화소시지의 이화학적 특성과 저장성, 그리고 관능성에 미치는 영향을 조사하기 위해 수행되었다. 알로에 베라(AV구)와 알로에 사포나리아(AS구)는 각 3%씩 첨가하였으며, 모든 처리구들은 냉장온도 4±1℃에서 4주간 저장하면서 주 1회 간격으로 실험이 진행되었다. pH는 AV구와 AS구가 대조구보다 유의적(p<0.05)으로 낮았고, 저장기간의 경과함에 따라 대조구 및 모든 처리구는 증가하였다. 보수성에서 AS구는 대조구와 AV구보다 유의적(p<0.05)으로 높은 값을 나타냈으며, 저장기간의 경과함에 따라 대조구 및 모든 처리구는 유의적(p<0.05)으로 감소하였다. 적색도는 AS구가 대조구 및 AV구 보다 낮은 값을 나타내었고, 황색도는 AS구가 대조구, AV구보다 높은 값을 나타내었다. 전단가는 AS구가 대조구보다 낮은 값을 나타냈으며, AV구와는 유의적인 차이가 없었다. 지방 산패도에서 AS구는 유의적 (p<0.05)으로 가장 낮은 값을 나타내었고, 관능 평가의 색은 AV구가 가장 높은 값을 나타냈으며, 선호도는 AV구가 대조구보다 높은 값을 나타냈고 AS구와는 유의적인 차이가 없었다. 이는 알로에 사포나리아의 첨가가 높은 보수성, 알로에 베라 첨가보다 낮은 지방산패도, 유사한 관능성을 나타내 기능성 소시지의 개발에 충분한 경쟁력을 가지고 있으며 향후 알로에 사포나리아를 첨가한 육제품의 일반화 및 대량생산 체계의 확립에 긍정적인 영향을 준다고 판단된다.

To reduce the environmental burden caused by the disposal of spent nuclear fuel and maximize the utilization of the repository facility, waste burden minimization technology is currently being developed at the Korea Atomic Energy Research Institute (KEARI). The technology includes a nuclide management process that can maximize disposal efficiency by selectively separating and collecting major nuclides in spent nuclear fuel. In addition, for efficient storage facility utilization, the short-term decay heat generated by spent nuclear fuel must be removed from the waste stream. To minimize the short-term thermal load on the repository facility, it is necessary to separate heat generating nuclides such as Cs-137 and Sr-90 from the spent fuel. In particular, Sr-90 must be separated because it generates high heat during the decay process. KAERI has developed a technology for separating Sr nuclides from Group II nuclides separated through the nuclide management process. In this study, we prepared Sr ceramic waste form, SrTiO3, by using the solid-state reaction method for long-term storage for the decay of separated Sr nuclides and evaluated the physicochemical properties of the waste form. Also, the radiological and thermal characteristics of the Sr waste form were evaluated by predicting the composition of Sr nuclides separated through the nuclide management process, and the estimation of centerline temperature was carried out using the experimental thermal data and steady state conduction equation in a long and solid cylinder type waste form. These results provided fundamental data for long-term storage and management of Sr waste.

흑타리 UV-B조사시간에 따른 저장특성과 에르고스테 롤함량의 변화를 조사하였다. 중량감모율은 조사시간이 길어질수록 중량의 감소율이 증가하는 경향을 보였다. CO2/O2 조성의 경우 UV-B 조사시간이 길어질수록 증가하는 것으로 나타났다. ΔE는 Lightness와 Redness에서 30분처리와 무처리에서 큰 차이를 보이지 않았지만, Yellowness에서 무처리가 15분처리보다 2.7, 30분처리보다 1.6 높은 값이 나온 것을 확인할 수 있다. 경도에서도 마찬가지로 UV-B 조사시간이 길어지면 빠르게 물러지는 것을 확인할 수 있다. 에르고스테롤의 함량변화의 경우 30분처리가 무처리보다 약 2배 정도 높은 값이 나온 것을 볼 수 있었다. 전자현미경으로 관찰한 결과 UV-B조사시 간이 길어지면 길어질수록 세포벽이 부서지는 경향을 나타냈으며, 30분처리에 비해서 15분처리의 세포벽이 좀 더 양호한 것을 볼 수 있었다. 전체적인 결과로 보았을 때 UV-B 조사시간이 길어지면 저장특성이 나빠지며, 세포벽이 파괴되지만, 에르고스테롤의 함량이 증가하는 것으로 보인다. 하지만, 30분처리의 저장특성에 비해 15분처리의 저장특성이 높았으며, 에르고스테롤의 함량 차이가 크게 나지 않는 것으로 확인되었다. 따라서, UV-B 30분처리를 하게 되면 에르고스테롤의 함량은 증가하지만, 중량의 감소율이 증가하며, 색차값이 달라지며, 세포벽이 많이 부서지는 경향을 나타내었다. 추후 UV-B의 적정조사시간에 대한 추가적인 연구가 필요할 것으로 판단된다.

본 연구는 저장 온도를 달리하여 높은 상대습도의 환경에서 건조 감자를 저장하였을 때 발생하는 품질변화를 관찰하였다. 저장기간 및 건조온도가 증가함에 따라 L* value 는 감소하였고, a* 및 b* value는 증가하는 경향을 나타내었다. 수분활성도는 높은 습도 조건으로 인해 10일차부터 급격히 증가하였으며, 환원형 비타민 C 함량은 급격히 감소하는 경향을 나타내었다. pH 값은 저장기간 동안 완만하게 감소하였으며 40oC에서 저장했을 때 큰 폭으로 감소하였다. 저장기간 동안 대장균군은 검출되지 않았으며, 일반 세균 수는 저장 온도가 증가함에 따라 많이 검출되었다. 전체적으로 20oC와 30oC에서 저장한 시료 간의 차이는 크지 않았으나, 40oC에서 저장한 시료의 경우 큰 품질변화를 나타내었고, 밀봉된 상태로 저장한 대조구의 경우 품질변화가 적게 나타나는 것을 확인할 수 있었다. 따라서 본 연구결과를 종합해 볼 때, 밀봉하여 산소와 수분을 차단한 상태로 저장하는 것이 제품 고유의 특성을 유지하는데 가장 효과적이며, 높은 습도의 환경일 경우 낮은 온도로 저장하는 것이 품질 변화를 지연시키는데 도움이 될 것으로 판단된다.