간행물
대한안전경영과학회 학술대회
- 발행기관 대한안전경영과학회
- 자료유형 학술대회
- 간기 연간
- 수록기간 1999 ~ 2022
- 주제분류 공학 > 안전공학 공학 분류의 다른 간행물
- 십진분류KDC 530DDC 620
권호리스트/논문검색
2003년도 대한안전경영과학회 추계학술대회 (2003년 11월) 49건
21.
2003.11
구독 인증기관 무료, 개인회원 유료
This study reviews the revisions and updates to the Release 3.5 version of the TL 9000 Measurements Handbook. This paper introduces the new organization of QuEST Forum Work Groups(WGs) and how to apply TL 9000 standards in software product lifecycle.
4,000원
22.
2003.11
구독 인증기관 무료, 개인회원 유료
The articles of food is very important things to human. Since PL Law came into effect in July of the last year(2002) in Korea, many domestic firms have taken great interests in PL. And the purpose of PL Law is to provide a means for those injured by defective products to receive redress. Additionally, enterprises get to place more importance on the safety of the products, which led to improvement in competitiveness and enhancement in quality. Consequently customers can get better products. So, it aims not only to compensate the injured by defective products but also to act an incentive to maker/supliers of food to make their products more safe. Therefore, this study was aiming to analyze the expected risks to articles of food after the enforcement of PL Law, and to establish a defending plan.an.
4,200원
23.
2003.11
구독 인증기관 무료, 개인회원 유료
This study is to develop and operate the R-FCE(Real-time Fuzzy Control Expert System) model on the SBR(Sequency Batch Reactors) type sewage disposal facility which is for the environmental problem of future and the effective treatment. It is the system that regularly handles the input, output information in real time by the Fuzzy control IF-THEN rule. Nowadays the water pollution caused by the increase of population and the industrialization already exceeds the purifying ability of nature and is getting worse. The sewage disposal facility needs an expert having wide experience and know-how because the quality or quantity of inflow water is so irregular that the process of sewage disposal is difficult. In the nation, however, the accumulation of technology is so weak because field-operators avoid the long-term duty. So the accurate and speedy decision or control of field are difficult in the case of emergency situation.
4,600원
24.
2003.11
구독 인증기관 무료, 개인회원 유료
반도체 제조 시스템에 대한 다양한 상황과 관련한 연구는 많지 않다 게다가, 모든 상황에 항상 적합한 생산시스템 전략은 없다. 반도체 제조공정 시스템에 대한 스케줄은 생산공정의 재진입, 공정의 높은 불확실성, 급속하게 변하는 제품과 기술과 같은 특성 때문에 반도체 제조공정시스템에 대한 스케줄은 복잡하고 어려운 작업이며, 사이클타임의 절감 및 단위시간당 생산량의 증대와 같은 시스템 목적을 달성하기 위하여, 반도체 제조 시스템에 대한 좋은 방법을 발견하기 위한 많은 연구가 있었다. 반도체 산업의 생산 흐름은 가장 독특한 특징을 가지고 있으며 생산계획과 반도체 제조의 스케줄링과 계획을 어렵게 하고 있다. 각각 다른 단계에 있는 자재는 같은 장비의 사용을 위해 경쟁을 하는데, 이로 인하여 작업시간 보다 단지 기다리는 시간에 상당한 시간을 할애하고 있다. 따라서 본 연구에서는 선행 연구를 바탕으로 반도체 공정에 모듈 생산방식을 접목시켜 공정의 사이클 타임을 줄이고, WIP를 최소화하여, 생산량을 최대화는 방안을 제시하고 공정 모듈 시스템 (Process Modular System)을 구축하고자 한다.
3,000원
25.
2003.11
구독 인증기관 무료, 개인회원 유료
A Study on Design of Production System for reducing Production Time in the Small and Medium Business
Each method for economic evaluation has its own characteristics. Therefore adoption of each of them in evaluation production investment project results in many problems. Hence combination & modification of them are required to perform more accurate evaluation about investment project. This paper discuss evaluation method of investment projects expansion and replacement investment on each line or individual in the production. Generally investment evaluation method has add to a few method by Subsidiary means with use a especial method. And then in this paper, a Taguchi Techniques is presented, which may be effective to the facilities appraisal or improvement. We propose a decision model to incorporates the values assigned by a group of experts on different factors in production. Using this model, SN ratio of taguchi method for each of subjective factors as well as values of weights are used in this comprehensive method for reducing production rate in production management.
3,000원
26.
2003.11
구독 인증기관 무료, 개인회원 유료
3D Modeling Solution can reduce projecting error and also make possible to design visually, so that it can minimize human resources. On the other hand, it has defects of operating difficulties caused by too much complex function, thus it consequently prevent user from prompt handling. According to this paper, the developed party S/W will help that user can construct the parts easily, can let everybody use 3D modeling solution readily, and make fast development of new product. This software will carry out prompt development of new product and derive satisfaction of customers from high quality. Also, saving time and expense naturally raise competitive power in consequence.
4,000원
27.
2003.11
구독 인증기관 무료, 개인회원 유료
5,100원
28.
2003.11
구독 인증기관 무료, 개인회원 유료
More and more many people show a keen interest in the ergonomics application car. One of the recent trends of cockpit development is to integrate fore part of whole cockpit and compartment. The goal of this study is to develop and Analysis of User's Convenience a cockpit prototype based on the design guide of cockpit integration module. The process of this study has been followed analyzing development trend of next generation Automotive cockpit, extracting the design factor needed to making integration module and laying down the design guide of cockpit integration module. Finally, this study is indicate an instance that evaluation of utilization with Integrated Automotive Cockpit Module System.
4,000원
29.
2003.11
구독 인증기관 무료, 개인회원 유료
4,200원
30.
2003.11
구독 인증기관 무료, 개인회원 유료
4,200원
31.
2003.11
구독 인증기관 무료, 개인회원 유료
We developing for Gate-Container Yard model to execute the Input & Output process of containers which are waiting in container yard effectively and fast. The optimal model is developed to manage and trace the containers in yard. We developed the put-away strategies which considered the storage time for volume of transportation and the distance between blocks and gates using the MICRO-CRAFT (Computerized Relative Allocation Facilities Technique).
4,600원
32.
2003.11
구독 인증기관 무료, 개인회원 유료
This paper describes the NC simulator system for Wire-cut electrodischarge machining. Electrodischarge Wire-cut machining is applicable to all materials including metals, alloys, and most carbides. Although CAM system generate the NC code considering electrodischarge conditions, incorrect Wire-cut tool path bring about fatal results. The simplest way of simulating a EDM process is to display the trajectory of Wire-cutter location by line segments. With this kind of simulation, the programmer can get a general idea about whether the wire is moving as planned but cannot locate gouging or excess material because only the wire location will be seen, not the changes in the workpiece as it is machined. The ideal way of simulating the EDM process is to display the solid model of the workpiece as it is machined. Therefore we propose the ideal NC simulator system for Wire-cut EDM.
4,000원
33.
2003.11
구독 인증기관 무료, 개인회원 유료
In this paper, we purpose the integrated TMS to solve the problem of current systems. Current system resulted in the inconvenience because customer and user must contact to each systems when they want to know the information about the order. In this time, we make the system customer and user can confirm all of order information from one system to solve this problem by integrating the information brought from two systems on constructing integrated DataBase.
4,000원
34.
2003.11
구독 인증기관 무료, 개인회원 유료
Globalization of Economic activities have increased Company's interests about International Logistics Management. Expansion of International trade depends on International Logistics which can overcome distance and time. In In-cheon, There are many small scale and minor Freight Forwarders take advatage of being linked with a port, an airport but their inefficient paper works cause raising of Logistics costs and losing of competitive power. In this study, we develop a web based ocean forwarder information system for freight forwarder to solve these problems. So, this system will provide decreasing operation time, human resources, and accessing easily because of web based system, and finally decrease logistics cost and improve national competitive power.
4,000원
35.
2003.11
구독 인증기관 무료, 개인회원 유료
본 연구는 생체지문 인식장치의 전략적 상품기획 프로세스를 통하여 표준화된 신상품 기획안을 도출하는데 있다. 이를 위해 사업전략과 목표시장을 설정한 후 1차 설문결과, 고객 요구준건을 , 2차의 설문조사 응답 결과를 바탕으로 기획품질을 결정하며, 이것의 만족도 정도를 Sales point로 삼았다. 상관 매트릭스를 이용하여 요구품질과 기술적 요소의 대응 정도를 살펴 본 후, 개발 제품 현재의 품질 특성치를 파악하기 위해 경쟁업체의 제품을 기준으로 벤치마킹 테스트를 실시하여 첫째, 세대별 상품전략 둘째, 세대별 요소기술 map. 셋째, 세대별 상품 컨셉. 넷째, 세대별 개발계획의 4개 파트의 다세대 상품기획을 수립하였다.
4,000원
36.
2003.11
구독 인증기관 무료, 개인회원 유료
In the country, already a 400 species and some Interchanges of different Section of Industry have been organized and a number of related industry come to a 4000 species. But in the present, Interchanges of different Section of Industry stay at a form of a friendly society as yet. In this study, we will be helpful to activity of Interchanges of different Section of Industry by concretely suggestion of the utility operation method of Interchanges of different Section of Industry in the many-sided point.
4,000원
37.
2003.11
구독 인증기관 무료, 개인회원 유료
Under WTO we are confronted with the upcoming of the infinite competition and the opening of education market. In order to meet such new changes, more and more university in education industry participate in the certification of ISO 14000. This paper presents an effective approach to obtain the ISO 14001 environmental management system, summarized as follows: First, the top manager should understand the environmental problems and motivate all personnels. Second, a systematized environmental management system should be constructed in accord with actual circumstances of firms, and should be improved continuously by means of effective operation, internal audit and management review. Third, an environmental policy should be published, the environmental programs should be established following an environmental objective, target and they should be monitored regularly.
4,000원
38.
2003.11
구독 인증기관 무료, 개인회원 유료
The four types of management accounting systems(traditional full costing, direct costing, activity-based costing, throughput accounting) are compared in this study. This paper reviews the differences between throughput and contribution margin. The paper concludes that the definition of totally variable cost(TVC) to calculate throughput is situational specific.
4,000원
39.
2003.11
구독 인증기관 무료, 개인회원 유료
This paper reviews differences between the traditional investment evaluation methods and real option approaches. This study considers management flexibility, contingency and volatility from a strategic management perspective. The roles of various real option approaches are discussed.
4,000원
40.
2003.11
구독 인증기관 무료, 개인회원 유료
In the electrode fabrication of unit cell, it was ascertained that electrochemical characteristics were greatly increased with 90 wt.% of BP-20, 5 wt.% of Super P and 5 wt.% of mixed binder [P(VdF-co-HFP) : PVP =7 : 3] The self-discharge of unit cell showed that diffusion process was controlled by the ion concentration difference of initial electrolyte due to the characteristics of Electric Double Layer Capacitor (EDLC) charged by ion adsorption in the beginning, but this by current leakage through the double-layer at the electrode/electrolyte interface had a minor effect and voltages of curves were remained constant regardless of electrode material. The electrochemical characteristics of 2.3 V/3,000 F grade EDLC were as follows: 0.35 m of DC-ESR (100 A discharge), 0.14 mof AC-ESR (AC amplitude 100 mV), 2.80 Wh/kg (3.73 Wh/L) of energy density and 4.64 kW /kg (6.19 kW/L) of power density. Power output was compatible with electric vehicle applications, uninterrupted power supply and engine starter, in due consideration of Ragone relations.
4,000원
