간행물
한국산업경영시스템학회 학술대회
- 발행기관 한국산업경영시스템학회
- 자료유형 학술대회
- 간기 반년간
- 수록기간 2002 ~ 2024
- 주제분류 공학 > 산업공학 공학 분류의 다른 간행물
- 십진분류KDC 530DDC 620
권호리스트/논문검색
한국산업경영시스템학회 2010 춘계학술대회 논문집 (2010년 5월) 86건
1.
2010.05
구독 인증기관 무료, 개인회원 유료
4,300원
2.
2010.05
구독 인증기관 무료, 개인회원 유료
This paper proposes a standard open source software development guidance and an evaluation index for the productivity related to Seam 2.0 and Spring 2.5 framework. However, there is no comparison research about the performance of Seam 2.0 and Spring 2.5 framework with same identical platform. Quantitative analysis is supported as a part of LoC analysis. There is a limit to develop the updated software with no the specific evaluating index for the productivity of the software. This work proposes an specific index for evaluating the productivity of Seam 2.0 and Spring 2.5 framework on a platform. Base on the result, the specific guidance of the developing software is obtained.
4,000원
3.
2010.05
구독 인증기관 무료, 개인회원 유료
본 연구는 계기판을 통해 운전자에게 전달되는 다양한 정보에 대한 인지성 실험을 통해 제공 되어야 할 정보의 우선순위와 계기판 영역내의 인지성 분포를 파악하고 이를 바탕으로 계기판의 디자인 가이드 라인을 제시함을 목적으로 한다. 계기판은 운전자에게 차량을 안전하게 조작하기 위해 알아야 할 중요한 정보를 제공하며 또한 계기판의 시인/시계성을 고려함으로서 운전자가 시야확보 및 운전상황 정보를 빠르고 정확하게 파악하게 할 수 있는 중요한 역할을 한다. 따라서, 계기판의 인지성은 안전 문전을 위해서 뿐 아니라 작업효율성을 위해서도 중요하다고 할 수 있다.
3,000원
4.
2010.05
구독 인증기관 무료, 개인회원 유료
Risk factors exist on industrial life cycle whole of military use or common use system. Also, risks exist in project for system development. Therefore, PMs that develop system concentrate a lot of efforts in risk management that discriminate hazardous factors that always exist in industrial life cycle and solved this. Because risk factors that exist in project dominate project success or failure. However, various modern systems are becoming SoS that complex and interdependence between system is gradually high. So, Program Managers or System Engineers develop and apply effective new risk management process for complex system development. Risk management is one of the most important duty of System Engineer who wish to find risk factor and control this does by systematic thought and approaches influence for system industrial life cycle whole. Recently, paradigm conversion about these risk management is achieved. That is, divide to positive factors and negative factors and manage risk factors. In particular, opportunity management technique that is proactive risk management technique that find first system development early positive factors that appear much as it is is developed and is already applied actuality in several projects. There is frequently example that this opportunity government official technique is applied in Department of Defense's weapon system development. This paper wishes to search about opportunity management technique and example applied in actuality project that can change paradigm of risk management.
4,000원
5.
2010.05
구독 인증기관 무료, 개인회원 유료
본 논문은 공급 사슬 환경에서 중간 부품을 제조하여 기업을 대상으로 판매하는 중소 제조 기업의 가격 결정 전략에 대하여 연구하였다. 특히 국내에서 자동차 부품을 제조하는 중소 기업들이 고객사에게 중간 부품을 생산하여 납품하면, 고객사가 다시 이 부품을 활용하여 그 다음 단계의 부품을 생산하여 완성차 제조업체에 납품하는 공급 사슬 환경을 고려하였다. 중소 제조 기업이 생산한 부품의 완성차 탑재 여부는 완성차를 생산하는 대기업과 협상하고, 납품 가격은 해당 부품을 구매하는 고객사와의 협상에 의해 결정된다. 본 논문은 이와 같은 환경에서 중소 제조 기업이 최적의 가격 결정을 위하여 취할 수 있는 전략 수립을 연구하였다.
4,000원
6.
2010.05
구독 인증기관 무료, 개인회원 유료
4,500원
7.
2010.05
구독 인증기관 무료, 개인회원 유료
In 450mm wafers production environment for next-generation semiconductor production, one of the most significant features is the adoption of full automation to the whole manufacturing processes involved. The full automation system applied to the whole manufacturing processes will prevent the workers from intervening the manufacturing processes as much as possible and increase the importance of each individual wafer noticeably, and thus require a more robust scheduling system for entire semiconductor manufacturing processes. The scheduling system for 450mm wafers production also should be capable of monitoring the status of each individual wafer and collecting useful fab data in real time. Based on data (or information) gathered in each process, the real-time scheduling system function efficiently to control the whole semiconductor manufacturing processes. In this study, we first carry out preliminary survey on the system requirements and the necessary functions for constructing the real time scheduling system with considering the changes from 300mm wafer production environment to 450mm wafer production environment, and then propose the scheduler system architectures for the cluster-type production processes which are the general in 450mm wafer production environment for the efficient production scheduling. The system architectures proposed in this study involve the modules for real-time scheduling, the modules for supporting the cluster-type production, the modules for finding optimal schedules, and so on. Also, we provide the specifications of the key required functions and capabilities of the modules and the relationship among the modules proposed.
4,000원
8.
2010.05
구독 인증기관 무료, 개인회원 유료
Shock absorber base assembly is one of the parts in shock absorber equipment which control the vehicle movement and absorb the shock and vibration to realize the stability and the comfort for the riding. This part demand hardness, reliance and rigorous density of the welded section because it is a resist pressure container which needs durability by being filled with gas and oil. However, the present engineering needs much time, high cost and shows low production rate due to the eight processes which are spot welding, reinforcement welding(MAG), prior process of base cap and tube for the precision and pressing etc. In this study we will analyze the problem of the processes for the base assembly and suggest an engineering to improve the problem innovatively using frictional welding. As the result of experiment by frictional welding using frictional heat, its hardness for the joining section became high and its precision showed excellence. Therefore we can expect the curtailment for the welding processes, the reduction of cost and excellent joining function.
3,000원
9.
2010.05
구독 인증기관 무료, 개인회원 유료
It is analysed the efficiency of the Korean IT industry using CCR and BCC models of the DEA(Data Envelopment Analysis) method in this study. In this study, the Korean IT industry is classified into 7 groups which are Displays, Digital Contents, Wireless Communication Devices, Telecommunication Services, Semi-Conducts, Broadcasting Services and Computer Services that the efficiency of each groups is analysed contrastively. And it is considered to find a way to improve the efficiency of inefficient companies using the slack variable analysis. Also the Super DEA is used to find the relative rank among companies that their efficiency is 100% and the change of the Korean IT efficiency is measured by the Time Series Analysis from 2005 to 2007 for 3years as well.
4,000원
10.
2010.05
구독 인증기관·개인회원 무료
신규 제품 및 설비 투자에 앞서 그 타당성을 검증하기 위하여 경제성 분석이 많이 사용되어지고 있다. 일반적인 경제성 분석은 투자에 직접적인 영향을 미치는 비용들을 최우선적으로 고려한 NPV, IRR, ERR 등을 활용하는 방법이 있다. 하지만 이러한 분석 방법은 간접적인 외부 요인 및 미래의 불확실성 이 고려되지 않아, 짧은 제품의 수명주기와 고객의 needs가 다양하고 복잡성을 띄고 있는 현 시장의 상 황에서는 전통적인 경제성 분석만으로는 그 한계성이 있다. 즉 외부의 요인이 고려되지 않은 경제성 평 가는 정적인 미래상황에 대한 투자 타당성의 자료로는 활용은 할 수 있으나, 동적인 미래상황에 대한 투자 타당성의 자료로 사용하기에는 부적절하다고 할 수 있다. 이러한 문제점을 보완하기 위하여 최근에는 투자에 직접적인 영향을 주는 전통적인 지표뿐만 아니라 외부의 간접적인 요인에 대한 지표까지 평가할 수 있는 AHP(Analytic Hierarchy Process)와 같은 기법들이 점차 널리 사용되어지고 있다. 따라 서 본 연구에서는 RFID 칩을 적용한 회수용 다단상자의 개발 타당성 검증을 위하여, 전통적인 경제성 분석기법과 AHP기법을 활용하여 시뮬레이션 모형을 개발함으로써 투자의 타당성을 검증하고자 한다.
11.
2010.05
구독 인증기관·개인회원 무료
본 연구는 회수 가능한 플라스틱 다단상자에 물류분야에서 주로 이용되는 UHF대역(900MHz)의 RFID 기술을 응용하기위해 플라스틱 다단상자에 금속 등의 내용물에 따라 인식률에 미치는 영향에 대해 논의 하고 RFID 칩의 삽입위치를 제안한다. 현재 수출용 물류에 사용되는 박스는 일회용 목재 팔레트를 이용 해 수출을 한 뒤 폐기하고 있는 실정이다. 일회용 목재 팔레트를 이용하는 수출업체는 폐기비용 발생으 로 인해 물류비가 증가하며 이는 가격경쟁력 면에서 뒤처지는 문제점뿐만 아니라 목재라는 특성상 수출 시 방역 및 위생문제에 노출, 외부 충격으로 인한 상자 및 상품의 파손위험 등의 단점이 있다. 많은 기업들이 신제품개발, 품질개선, 원가절감 등에 힘쓰고 있지만, 이들 중 대부분의 기업은 물류비용에 대한 인식이 결여되어있다. 따라서 본 연구에서 회수 가능한 플라스틱 다단상자에 RFID 기술을 응용해 기존의 나무상자의 단점을 해소하고 대체할 수 있는 방안을 제시하기 위해 실험을 통해 RFID 칩의 부착위 치를 실증적으로 연구하였다.
12.
2010.05
구독 인증기관 무료, 개인회원 유료
Finding the critical path (or the longest path) on acyclic directed graphs, which is well-known as PERT/CPM, the ambiguity of each acr's length can be modeled as a range or an interval, in which the actual length of arc may realize. In this case, the min-max regret criterion, which is widely used in the decision making under uncertainty, can be applied to find the critical path minimizing the maximum regret in the worst case. Since the min-max regret critical path problem with the interval arc's lengths is known as NP-hard, this paper proposes a heuristic algorithm to diminish the maximum regret and the computational experiments shows the proposed algorithm contributes to the improvement of solution compared with the existing heuristic algorithms.
4,000원
13.
2010.05
구독 인증기관 무료, 개인회원 유료
The number of people aged 5 through 19 is 1,794,289 as of end of 2005, and 13.25% of them, 237,743, are supposed to be struggled against ADHD. Even some statistics claim about 50% of them have ADHD. The over-addiction to computer games and TV watching might be major causes of ADHD, which is said by some experts from various fields. This research is to study the necessity of BCI-based functional game development, which has positive effect on ADHD youngsters by improving the level of attention through BCI-based games. The necessity is categorized into social, cultural, technical, and economical areas and analyzed respectively. This research is hopefully expected to be the starting point helping ADHD youngsters, their parents, and families.
4,000원
14.
2010.05
구독 인증기관 무료, 개인회원 유료
Finding the critical path (or the longest path) on acyclic directed graphs, which is well-known as PERT/CPM, the ambiguity of each acr's length can be modeled as a range or an interval, in which the actual length of arc may realize. In this case, the min-max regret criterion, which is widely used in the decision making under uncertainty, can be applied to find the critical path minimizing the maximum regret in the worst case. Since the min-max regret critical path problem with the interval arc's lengths is known as NP-hard, this paper proposes a heuristic algorithm to diminish the maximum regret and the computational experiments shows the proposed algorithm contributes to the improvement of solution compared with the existing heuristic algorithms.
4,000원
15.
2010.05
구독 인증기관 무료, 개인회원 유료
Time series exhibiting linear and periodic trends is analyzed Detailed method of extracting nested periods and resulting periodic components, finding the best fit ARMA model for non-linear and non-periodic component, and setting up control boundary are presented. The concept of time scale is introduced to better understand periodic dynamic.
4,200원
16.
2010.05
구독 인증기관 무료, 개인회원 유료
In 450mm wafers production environment for next generation Fab, one of the most significant features is the adoption of full automation to the whole manufacturing processes involved. The full automation system will prevent the workers from intervening the manufacturing processes as much as possible and increase the importance of each individual wafer noticeably, and thus require a more robust scheduling system for entire semiconductor manufacturing processes. The scheduling system for 450mm wafers production also should be capable of monitoring the status of each individual wafer and collecting useful Fab data in real time. In this study, we first analysis of cluster tool in 450mm wafers production environment, and then propose a real-time scheduling algorithm based on timetabling algorithm.
4,000원
17.
2010.05
구독 인증기관 무료, 개인회원 유료
4,600원
18.
2010.05
구독 인증기관 무료, 개인회원 유료
4,000원
19.
2010.05
구독 인증기관 무료, 개인회원 유료
This study is to propose an improved R&D (Research and Development) earned value management execution model for large scale national R&D commercialization project. Current literature for Large Scale National R&D project has focused on the basic research, applied research, and the development of R&D project. In this study, we propose appropriate performance indicators and Earned Value Management (EVM) system that can be applied to large scale national R&D commercialization projects.
4,000원
