대량유살 기술을 통한 총채벌레 방제 기술이 시설 고추재배지를 중심으로 개발되었다. 이 기술의 핵심 요인은 효과적 유인제 개발에 있다. 집합페로몬에 의존하였던 유인전략은 노지 재배지에서는 뚜렷한 효과를 보이지 않았다. 따라서 본 연구는 노지 고추재배지에서 총채벌레의 대량 유살을 위해 새로운 유인물질의 추가가 필요하였다. 또한 노지재배지에서 집합페로몬의 유인력 감소 원인을 규명할 필요가 있었다. 새로운 유인 물질로서 methyl isonicotinate (MIN)이 제시되었고, 이 물질이 실내 유인행동분석을 통해 총채벌레에 대한 자체 유인력은 물론이고 집합페로 몬과 협력효과를 보였다. 이를 바탕으로 집합페로몬과 혼합물 형태로 노지 고추재배지에서 분석한 결과 총채벌레의 포획밀도를 증가시켰다. 특 히 이러한 증가는 꽃노랑총채벌레(Frankliniella occidentalis)에서 뚜렷하게 나타났다. 유인트랩에 집합페로몬의 함량 증가는 노지 고추재배지에 서 꽃노랑총채벌레는 물론이고 다른 총채벌레류의 포획밀도를 뚜렷하게 증가시켰다. 본 연구는 집합페로몬 유인력이 시설재배지와 노지재배지 사이에서 차이가 있으며, 노지 재배지의 경우 효과적 유인력을 발휘하기 위해서는 더욱 많은 집합페로몬 함량을 요구한다는 것을 밝혔다. 또한 본 연구는 집합페로몬에 MIN을 추가하여 꽃노랑총채벌레에 대한 고효율 유인제를 개발할 수 있는 기술을 제시한다.

In this study, complaints from visitors in the science museum satisfaction survey were categorized into four primary factors and ten sub-factors. This categorization aimed to provide recommendations for enhancing the Geochang Wolseong Space Creative Science Museum as an illustrative case study. Futhermore, the study examimed the relative importance of each factor by surveying 90 science museum visitors. The following results are obtained. Firstly, it was evident that the Geochang Wolseong Space Creative Science Museum requires urgent improvement. Certainly, in the primary factors, issues related to the utilization environment emerged as the most significant sources of dissatisfaction, while in the sub-factors, the adequacy of fees was identified as the most prominent concern. Secondly, through the result of the IPA (Importance-Performance Analysis) of the complaint factors, four primary issues were identified as top priorities for consideration: fare adequacy, lack of convenient facilities, in sufficient publicity, and a lack of distinctiveness compared to similar facilities. Lastly, when analyzing the relationship between complaints and overall satisfaction, factors related to human service, environment, and educational content had negative effects. In contrast, factors associated with science museum operation exhibited a different trend, suggestinga structural impact relationship with the overall impact of complaints.

본 연구의 목적은 급변화하는 사회환경속에서 사회복지 조직의 적시성 있는 대처를 위해 필요한 새 로운 경영가치 체계의 필요성을 고민하면서 최근 이슈가 되고 있는 ESG 가치를 통해 사회복지 경영의 새로운 변화를 돕고자 실증적인 연구를 수행하는 것이다. 이를 위해 인천시에 있는 지역사회복지관 종사자들이 생각하는 ESG 개념, 관련 운영 사업에 대한 조사, ESG에 대한 인식도, 조직에 적용하기 위한 필수조건, 사회복지 조직이 ESG를 적용해야 하는 이 유 등과 관련된 내용을 조사, 분석하였다. 또한 설문조사 결과를 바탕으로 FGI를 추가 진행하고 최종 합의하는 방식으로 연구를 수행하였다. 구체적으로, 인천시 지역사회복지관이 적용할 수 있는 ESG에 대한 개념과 지표 그리고 전략을 선정 하였으며, 현재 진행하고 있는 ESG 관련 사업과 내부 전략 등을 조사 분석하였다. 연구결과를 통해 ESG에 대한 필요성과 기관 적용 모델을 가치적 실천 모델(A), 사업적 적용 모델 (B), 전략적 실천모델(C)로 제안하였다. 이 연구를 통해 ESG를 기반으로 사회복지 조직 운영에 필요한 7가지 정책적 대안을 제시하였다.

Fiber-reinforced polymer (FRP) exhibits superior tensile strength and corrosion resistance compared to steel but has a lower elasticity. Recently, researchers have addressed this by proposing composite sections of FRP and concrete. To ensure the intended composite behavior, these FRP–concrete sections should exhibit sufficient stress transfer between the two elements through a shear connection. Herein, various shear connection methods were proposed to improve the composite behavior of glass fiber–reinforced polymer (GFRP) plates and concrete. Through push-out tests, the behavior characteristics of the prepared specimens were analyzed. The findings confirm that an FRP shear key (FSK) with a small cross-section resists high shear stresses, making it suitable for sections vulnerable to damage from bolt drilling. Additionally, combining an FSK with bolts as shear connectors on a GFRP plate proves beneficial in preventing the fracture of the plate and improving the shear resistance.

본 연구는 성격 기질 중 보호자 기질을 대상으로 원예활동 선호를 확인하고, 이에 기반으로 원예활동 프로그램 계획 시 대상자 맞춤 프로그램 구성 전략을 도출하고자 실시하였다. 설문은 2019년 4월부터 6월까지 대학생이나 대학원생 705명에게 실시하였고, 그 중 성격 기질이 보호자 기질로 나타난 335명의 결과를 이용하였다. 설문 내용은 원예에 대한 인식, 원예 활동 경험에 대한 선호, 원예 활동 유형별 선호 등으로 구성되어있으며, 설문 결과는 IBM SPSS 25 통계 프로그램을 이용하여 빈도분석, 기술통계, 회귀 분석, IPA 분석 등을 실시하여 분석하였다. 그 결과 원예에 대한 인식과 경험 여부 및 원예 활동에 관한 관심은 전반적으로 긍정적인 것으로 확인되었다. 원예 활동 유형별로 가장 많이 선호하는 활동 유형은 ‘공예 및 요리’, 가장 많이 선호하지 않는 활동은 ‘자연 학습 및 채집’이었고, 선호도 및 관심도가 가장 높은 활동 유형은 ‘직접 자연 느끼기’였다. 회귀 분석을 통한 원예 활동 선호 영향력과 IPA 전략 분석 결과 보호자 기질을 가진 대상에게 원예 활동 프로그램을 구성할 때는 가장 중요한 실행 요인으로 선호에 영향을 미치는 ‘실내 조원’, ‘실외 조원’ 및 ‘직접 자연 느끼기’ 유형의 활동을 기반으로 한 프로그램을 구성하고, 여기에 기본요인으로 대상자들의 활동 만족도를 제고시키기 위하여 ‘공예 및 요리’ 유형의 활동을 주 프로그램과 함께 부가적인 프로그램으로 추가해주는 것이 적합할 것으로 나타났다.

PURPOSES : LED based Variable Message Signs(VMS) have been widely used to inform safety messages to the drivers in advance. Legibility Distance of VMS is the most important factor to provide the safety messages to drivers in timely and effective way. However, current National Standards on legibility distance design considers letter size only even there is a difficulty to read the signs at adverse weather conditions such as heavy fog. So, this study examined the legibility issue under fog by evaluating the legibility distance with two design factors such as letter size and luminance. METHODS : Two foggy weather conditions, intermediate and heavy fog, were simulated at real-road-scale Proving Ground. Legibility distance at daytime and nighttime was evaluated by test subjects. Subjects were asked to fill the legible distance on the test sheet and statistical significant was analysed at the lab. RESULTS : The legibility distance(LD) under fog was observed only 22 to 41% of LD observed under normal weather condition at daytime, and 26 to 45% at nighttime condition. Study results showed a consistent increase in LD with higher luminance even at same letter size and vice versa conditions, However, statically significant difference between groups was only revealed when both letter size and luminance level increased conditions. In order to apply the test results in terms of engineering benefits, LD results from significantly different groups was evaluated with relative to Stopping Sight Distance(SSD) within conceptual frame suggested in this study. CONCLUSIONS : From the study results, current National Standard on legibility distance design needs to consider letter size and luminance simultaneously to response the legibility issue in adverse weather conditions.

YAG phosphor powders were fabricated by the atmospheric plasma spraying method with the spray-dried spherical YAG precursor. The YAG precursor slurry for the spray drying process was prepared by the PVA solution chemical processing utilizing a domestic easy-sintered aluminum oxide (Al2O3) powder as a seed. The homogenous and viscous slurry resulted in dense granules, not hollow or porous particles. The synthesized phosphor powders demonstrated a stable YAG phase, and excellent fluorescence properties of approximately 115% compared with commercial YAG:Ce3+ powder. The microstructure of the phosphor powder had a perfect spherical shape and an average particle s ize of a pprox imately 30 μm. As a r esult of t he PKG t est of t he YAG p hosphor p owder, t he s ynthesized phosphor powders exhibited an outstanding luminous intensity, and a peak wavelength was observed at 531 nm.

In this study, changes in the microstructure and mechanical properties of cast and extruded Al-2Li-1Ce alloy materials were investigated as the Mg content was varied. The density decreased to 2.485, 2.46 and 2.435 g/cm3 when the Mg content in the Al-2Li-1Ce alloy was increased to 2, 4 and 6 wt%, respectively. Intermetallic compounds of Al11Ce3 were observed in all alloys, while the β-phase of Al3Mg2 was observed in alloys containing 6 wt% of Mg. In the extruded material, with increasing Mg content the average grain size decreased to 84.8, 71.6 and 36.2 μm, and the fraction of high-angle grain boundaries (greater than 15°) increased to 82.8 %, 88.6 %, and 91.8 %, respectively. This occurred because the increased Mg content promotes dynamic recrystallization during hot extrusion. Tensile test results showed that as the Mg content increased, both the yield strength and tensile strength increased. The yield strength reached 86.1, 107.3, and 186.4 MPa, and the tensile strength reached 215.2, 285, and 360.5 MPa, respectively. However, it is worth noting that the ductility decreased to 27.78 %, 25.65 %, and 20.72 % as the Mg content increased. This reduction in ductility is attributed to the strengthening effect resulting from the increased amount of dissolved Mg, and grain refinement due to dynamic recrystallization.

우리나라는 삼면이 바다로 이루어져 있고, 이에 따라 많은 해양 시설로 인한 위험유해물질이 배출되고 있으나, 배출관리 및 규제 시스템이 미비한 상황이다. 따라서, 위험유해물질(HNS) 관리를 위하여 효율적으로 데이터를 수집할 수 있는 시스템이 필요하 다. 본 연구에서는 HNS 데이터를 효율적으로 관리 및 저장하기 위한 데이터 표준화 시스템을 설계하고 이의 표준화 방안을 제시하고 자 한다.

PURPOSES : Previously, the expansion state of the concrete pavement in which AAR occurred could not be determined. Because the current situation has not been evaluated, it has been difficult to prepare an appropriate response. In this study, a method for calculating the expansion amount of concrete pavement using the stiffness damage test (SDT) is proposed. METHODS : The SDT method was examined through a literature review. For the laboratory tests, specimens that generated AAR were produced based on the mix design (2018) of the Korea Expressway Corporation. SDT was used to calculate various mechanical properties, and their correlation with the expansion amount was reviewed. RESULTS : Using the SDT, various mechanical properties(elastic modulus, hysteresis area, plastic deformation, plastic deformation index, stiffness damage index, and nonlinear index) were calculated based on the expansion rate of the AAR. The elastic modulus was evaluated as the best predictor of the expansion rate. Thus, if the elastic modulus is calculated using SDT, a prediction equation can be used to calculate the amount of AAR expansion. This equation will need to be supplemented by further research. CONCLUSIONS : SDT was used to confirm that the expansion state due to the AAR of the concrete pavement could be indirectly evaluated. Among the mechanical properties related to SDT, the elastic modulus was found to be the most suitable for predicting the amount of expansion.