Stainless steel is used in many industrial fields due to its excellent properties such as workability, strength, ductility, and corrosion resistance, and various properties required in the manufacturing field depending on the constituent components. pump impellers used in seawater and underwater require high corrosion resistance and high rigidity to prevent corrosion and damage, so they are a representative part group to which Stainless materials are applied. Through the introduction of the CMT(Cold Metal Transfer) process, a manufacturing method through WAAM(Wire Arc Additive Manufacturing) technology, which has advantages of lower production cost and excellent fatigue strength compared to the existing casting method, is being proposed. Recently, prior research on the WAAM process has been conducted on various materials, but most of the research results published so far are focused on the DED(Direct Energy Deposition) process, and a good WAAM shape design study using austenitic stainless steel is lacking. in this study, using the CMT process, the relationship between the change in bead shape and process parameters was confirmed in the BoP(Bead on Plate) welding experiment using wire made of austenitic stainless steel STS-308.

This study investigated the quality characteristics of the traditional rice cake of Gijeongtteok added with an extract from Cudrania tricuspidate fruit and different amounts of kimchi broth. The pH measurement showed a significant decrease with the increase of the kimchi broth from pH 5.48 (control) to 4.86 (KG180). Hunter color L-values were decreased while redness and yellowness were increased as the amount of kimchi broth increased. Texture profile analysis showed that hardness and adhesiveness significantly increased and decreased as the amount of kimchi broth increased. Gijeongtteok with kimchi broth (KG180) had the lowest specific volume with increased gummy layers in the crumb structure. Sensory evaluation of color, flavor, taste, appearance, and overall acceptance for various levels of kimchi broth showed that the KG140 sample had the highest acceptability. Therefore, this study suggests that Gijeogtteok made with the KG140 mixing ratio has excellent quality and sensory characteristics.

In this study, scones were prepared using Cordyceps powder, described as ‘immortal life’. Cordyceps powder was prepared in 0%, 2%, 4%, 6%, and 8% ratios, and salinity, color, texture, and antioxidant properties were analyzed. The salinity of Cordyceps scones did not show a difference according to the amount of Cordyceps powder added (p=0.364), and the a-, b-values increased significantly (p<0.001). In the case of texture, there was no significant difference in the amount of Cordyceps added. Flavonoids increased significantly as the amount of Cordyceps powder increased (p<0.001). ABTS-radical scavenging capacity increased significantly as the amount of Cordyceps powder increased (p<0.001). Through this study, the antioxidant properties of Cordyceps scones were confirmed.

This study aims to analyze research trends regarding outdoor wear. For this purpose, the data-collection period was limited to January 2002–October 2022, and the collection consisted of titles of papers, academic names, abstracts, and publication years from the Research Information Sharing Service (RISS). Frequency analysis was conducted on 227 papers in total to check academic journals and annual trends, and LDA topic-modeling analysis was conducted using 20,964 tokens. Data pre-processing was performed prior to topic-modeling analysis; after that, topic-modeling analysis, core topic derivation, and visualization were performed using a Python algorithm. A total of eight topics were obtained from the comprehensive analysis: experiential marketing and lifestyle, property and evaluation of outdoor wear, design and patterns of outdoor wear, outdoor-wear purchase behavior, color, designs and materials of outdoor wear, promotional strategies for outdoor wear, purchase intention and satisfaction depending on the brand image of outdoor wear, differences in outdoor wear preferences by consumer group. The results of topic-modeling analysis revealed that the topic, which includes a study on the design and material of outdoor wear and the pattern of jackets related to the overall shape, was the highest at 30.9% of the total topics. The next highest topic was also the design and color of outdoor wear, indicating that design-related research was the main research topic in outdoor wear research. It is hoped that analyzing outdoor wear research will help comprehend the research conducted thus far and reveal future directions.

In this study, text mining was conducted on the product names of skirts, pants, shirts/ blouses, and dresses to analyze the characteristics of keywords appearing in online shopping product names. As a result of frequency analysis, the number of keywords that appeared 0.5% or more for each item was around 30, and the number of keywords that appeared 0.1% or more was around 150. The cumulative distribution rate of 150 terms was around 80%. Accordingly, information on 150 key terms was analyzed, from which item, clothing composition, and material information were the found to be the most important types of information (ranking in the top five of all items). In addition, fit and style information for skirts and pants and length information for skirts and dresses were also considered important information. Keywords representing clothing composition information were: banding, high waist, and split for skirts and pants; and V-neck, tie, long sleeves, and puff for shirts/blouses and dresses. It was possible to identify the current design characteristics preferred by consumers from this information. However, there were also problems with terminology that hindered the connection between sellers and consumers. The most common problems were the use of various terms with the same meaning and irregular use of Korean and English terms. However, as a result of using co-appearance frequency analysis, it can be interpreted that there is little intention for product exposure, so it is recommended to avoid it.

The external weather conditions including temperature and wind speed in the Saemangeum reclaimed land is different from that of the inland, affecting the internal environment of the greenhouse. Therefore, it is important to select an appropriate covering material considering the insulation effect according to the type and characteristics of the covering material considering the weather condition in the Saemangeum reclaimed land. A hexahedral insulation chamber was designed to evaluate the insulation efficiency of each glass-clad material in the outside weather condition in reclaimed land. In order to evaluate the insulation effect of each covering material, a radiator was installed and real-time power consumption was monitored. 16-mm PC (polycarbonate), 16-mm PMMA (polymethyl methacrylate), 4-mm greenhouse glass, and 16-mm double-layered glass were used as the covering materials of the chamber. In order to understand the effect of the external wind directions, the windward and downwind insulation properties were evaluated. As a result of comparing the thermal insulation effect of each greenhouse cover material to single-layer glass, the thermal insulation effect of double-layer glass was 16.9% higher, while PMMA and PC were 62.5% and 131.2% higher respectively. On average the wind speed on the windward side was 53.1% higher than that on the lee-wind side, and the temperature difference between the inside and outside of the chamber at the wind ward side was found to be 52.0% larger than that on the lee ward side. During the experiment period, the overall heating operation time for PC was 39.2% lower compared to other insulation materials. Showing highest energy efficiency, and compared to PC, single-layer glass power consumption was 37.4% higher.

중국과 한국의 지리적 위치는 필연적으로 그들 사이의 지속적인 교류 와 문화적 상호작용을 결정한다. 한류가 세계적으로 두각을 나타내기 시 작한 이후 중국은 한류에 휩쓸려 음악부터 TV, 영화까지 중국에 깊은 영향을 끼쳤다. 한국 영화는 한류의 일환이지만 다른 나라에서는 한국 음악과 드라마만큼 영향력이 크지 않다. 중국에도 마찬가지다.하지만 많 은 사람들이 한국 음악과 드라마에 열광하는 상황에서 중국 내 일부 팬 들은 한국 영화에 열광하고 있다. 2001년 중국에서 첫 한국 영화가 개봉 된 이후, 양국이 함께 영화를 제작해 왔으며, 점점 더 많은 배우들이 한 중 합작 영화에 참여하고 있다. 양국 배우들에게 더 많은 교류 기회를 제공해 주었다. 그러나 2017년 사드 배치로 중국과 한국의 관계가 경색 되면서 중국과 한국의 교류는 거의 단절되었다. 2021년 말에는 6년 만에 한국 영화가 중국에서 다시 상영되지만, 환경적인 영향과 중국 관객들의 심리적인 변화 때문에 전과 같은 각광을 받지 못 했다. 그러나 어떻게 하면 한국영화가 중국에서 다시 인기 끌 수 있을 것인가 하는 것은 다시 고찰과 노력이 필요하다.

High-pressure sodium (HPS) lamps have been widely used as a useful supplemental light source to emit sufficient photosynthetically active radiation and provide a radiant heat, which contribute the heat requirement in greenhouses. The objective of this study to analyze the thermal characteristics of HPS lamp and thermal behavior in supplemented greenhouse, and evaluate the performance of a horizontal leaf temperature of sweet pepper plants using computational fluid dynamics (CFD) simulation. We simulated horizontal leaf temperature on upper canopy according to three growth stage scenarios, which represented 1.0, 1.6, and 2.2 plant height, respectively. We also measured vertical leaf and air temperature accompanied by heat generation of HPS lamps. There was large leaf to air temperature differential due to non-uniformity in temperature. In our numerical calculation, thermal energy of HPS lamps contributed of 50.1% the total heat requirement on Dec. 2022. The CFD model was validated by comparing measured and simulated data at the same operating condition. Mean absolute error and root mean square error were below 0.5, which means the CFD simulation values were highly accurate. Our result about vertical leaf and air temperature can be used in decision making for efficient thermal energy management and crop growth.

The electromembrane process, which has advantages such as scalability, sustainability, and eco-friendliness, is used in renewable energy fields such as fuel cells and reverse electrodialysis power generation. Most of the research to visualize the internal flow in the electromembrane process has mainly been conducted on heterogeneous ion exchange membranes, because of the non-uniform swelling characteristics of the homogeneous membrane. In this study, we successfully visualize the electroconvective vortices near the Nafion homogeneous membrane in PDMS-based microfluidic devices. To reinforce the mechanical rigidity and minimize the non-uniform swelling characteristics of the homogeneous membrane, a newly developed swelling supporter was additionally adapted to the Nafion membrane. Thus, a clear image of electroconvective vortices near the Nafion membrane could be obtained and visualized. As a result, we observed that the heterogeneous membrane has relatively stronger electroconvective vortices compared to the Nafion homogeneous membranes. Regarding electrical response, the Nafion membrane has a higher limiting current and less overlimiting current compared to the heterogeneous membrane. Based on our visualization, it is assumed that the heterogeneous membrane has more activated electroconvective vortices, which lower electrical resistance in the overlimiting current regime. We anticipate that this work can contribute to the fundamental understanding of the ion transport characteristics depending on the homogeneity of ion exchange membranes.

A turbo engine is used to improve engine volumetric efficiency by using the energy of exhaust gas with a device such as a turbocharger. Recently, it has been attracting attention as a solution for responding to environmental issues such as exhaust gas regulation, and its use is being expanded to gasoline and CNG engines as well as diesel engines. However, as electric and hydrogen vehicles enter the automotive market more rapidly, traditional turbo engines also confront many challenges. In this paper, to examine the current status and prospects of the turbo engine, we analyze the related patents in the turbo engine field applied to patent offices in seven major countries, including Korea, USA, China, Japan, Germany, France, and the European Union Patent Office, and analyze the patent application trend. Using ‘the pie’ system of Korea Institute of Science and Technology Information (KISTI), family patents were refined, patent application trends were diagnosed, and the technology and market competitiveness of major applicants were compared and analyzed. Even within the turbo engine market, where traditional automakers and turbocharger manufacturer participate, it was possible to examine the dynamic changes in the market through the analysis of technology and market competitiveness. The main companies leading the technology and market aspects and the companies specialized in the technology and market aspects were observed.

Numerical analysis has been carried out to predict the thermal characteristics for a LED lens in mold core system. These thermal characteristics inside the lens are largely affected by geometry, material, and initial conditions of the mold core and lens system. Local temperature and heat flux variation inside the lens are compared for several initial temperatures. Maximum temperature inside the lens was decreased rapidly from the beginning of cooling process up to about 10 seconds. There was also large variation of the heat flux at the upper and lower surfaces of the lens with initial temperature distribution. And the heat flux from the thin lower surface of the lens was relatively higher than the opposite-side thick region. In addition, overall heat transfer rate from the lens through the mold core has similar transient distribution from the beginning. These results can be applied as basic heat transfer data for the LED lens design and manufacturing process in the mold core system.

In this study, when a communication wire harness is defective due to long-term operation of a vehicle with a high-speed CAN communication network, the unique ID information of each controller and the oscilloscope waveform are analyzed to find defects. As a result of the experiment, it was possible to know whether the circuit of the main wiring was disconnected by the differential voltage analysis, and it was possible to confirm whether the sub-wiring was disconnected due to the generation of saw blade waveforms in the bus idle part. In addition, the fault location could be found with controller ID information and communication circuit analysis.

In this paper, we propose a analysis of domestic and foreign standards on protecting human body from EMF(Electromagnetic filed) and effect of the human body through EMF analysis of military electronic equipment in operation. We measured the EMF intensity of the side lobe and back lobe main beam on Radar Equipment at an accessible position. As a result, it was confirmed that the measured EMF intensity of three types of radar equipment did not exceed the standard on domestic protecting human body from EMF.

디지털 기술의 발전에 따라 해상환경은 빠르게 변화할 것으로 예상된다. 자율운항선박의 경우 국내ㆍ외 많은 국가에서 기술개 발 중이며, 국제사회는 이를 운용하기 위한 논의도 시작되었다. 선박의 변화는 해상교통 환경의 변화를 야기하며, 육상지원시설에 대한 변화도 촉구한다. 본 연구는 항행지원시설의 사이버 보안 체계 개선을 위해 해상교통관제 인원의 사이버 보안 관리 인식을 분석하고자 한다. 이를 위해 해상교통관제 중심으로 사이버 보안 관리 현황을 살펴보고, 해상통관제 인원을 대상으로 설문조사를 실시하였다. 설문조 사 분석은 IPA 방법론을 활용했으며, 분석결과 보안담당 경험이 있는 인원과 경험 없는 인원의 사이버 보안에 대한 인식차이가 뚜렷하게 나타났다. 더불어 사이버 공격 탐지 및 차단 관련 기술적인 조치가 가장 우선적으로 시행되어야할 사항으로 나타났다. 본 연구 결과는 항 행지원시설에 대한 사이버 보안 관리 체계 개선을 위한 기초자료로 사용될 수 있다.

해양사고 발생시 실종자는 해양에 노출된 시간이 길어질수록 생존확률이 빠르게 감소하기 때문에 인명구조를 위해서는 신 속한 수색이 필요하다. 또한 해양의 수색영역은 육상에 비해서 매우 넓기 때문에 효율적인 수색을 위해서는 선박을 이용한 육안수색보 다는 인공위성이나 항공기에 탑재된 센서를 이용한 해상 객체 탐지 기술의 적용이 필요하다. 본 연구는 항공기에 탑재된 초분광 영상 센서를 이용하여 해양에서 객체를 신속하게 탐지하기 위한 목적으로 진행되었다. 초분광 영상 센서로 촬영된 영상은 8,241 × 1,024의 공간 해상도를 가지며, 한 화소당 0.7 m의 분해능과 127개의 스펙트럼으로 구성된 대용량의 데이터이다. 본 연구에서는 이러한 데이터 를 신속하게 분석하기 위한 목적으로 DBSCAN을 사용한 해수 식별 알고리즘과 밀도 기반의 육지 제거 알고리즘을 결합한 해상 객체 탐지 모델을 개발하였다. 개발한 모델은 초분광 영상에 적용하였을 때 약 5 km2의 해상 영역을 100초 내로 분석할 수 있는 성능을 보 였다. 또한 개발한 모델의 탐지 정확도를 평가하기 위해서 항공기를 이용하여 목포, 군산, 여수 지역의 초분광 영상을 촬영하였으며, 본 연구에서 개발한 탐지 모델에 적용한 결과, 실험 영상 내의 선박들을 90 %의 정확도로 탐지할 수 있는 결과를 얻었다. 본 연구에서 개발된 기술은 소형 선박의 수색·구조 활동을 지원하는 중요한 정보로 활용될 수 있을 것으로 기대한다.

Recently, halogen lamps for vehicle exterior lamp systems are being replaced by LEDs (Light Emitting Diode) in consideration of miniaturization, power consumption, life, luminance, and eco-friendliness. Due to regulations on the amount of light required, luminance, light uniformity, and glare prevention, it is required to develop a light guide for controlling a light source of an LED lamp for a vehicle. For the development of the light guides, the development of machining technology that can cut micro patterns of hundreds of micrometers scale into surface roughness of tens of nanometers scale must be preceded. In this study, the effect of variations in cutting conditions on surface roughness was analyzed through experiments. The micro patterns was manufactured by cutting into STAVAX material, and the surface of the micro patterns was super-finished using a ball-shaped PCD (polycrystalline diamond) tool without flutes. In experiments, the cutting conditions of the super-finishing process were varied, and the varied cutting conditions were feed rate, radial depth of cut, and spindle speed

Environmental noise occurring on ships has various negative impacts on sailors’ health conditions such as hearing loss, sleep disturbance, psychological stress, etc., so regulations on them are required, but the ship noise regulations are usually applied to only large merchant ships. Although regulations on fishing boats with strong fishing and work intensity are determined to be necessary, there has been little relevant research. This study, therefore, attempted to measure the environmental noise of coastal composite fishing vessels less than two tones and provide the results of basic research on the noise regulations for fishing vessels. It measured them by setting the measurement zones as after side, midship and fore side, and based on the criterion of IMO MSC 337(91). The findings showed that the noise of them often exceeded 75dB(A), the criterion of the open deck noise in the zones in which the load of main engines was increased. In particular, the noise of the stern was as high as 92.2dB(A) during the full ahead. Hence, hearing loss may be caused by such a noise, so a variety of regulations on it are determined to be necessary.

Noise is a sound that humans do not want. In this study, noise is measured for C172, the most frequently used general aviation trainer in Korea and abroad. In addition, in this study, noise measurement points are selected for Muan Airport, where most of the domestic training aircraft fly under the supervision of the Ministry of Land, Infrastructure and Transport. Based on this, the measured data is scaled and analyzed. In addition, we intend to analyze what characteristics C172 aircraft have unique through frequency analysis of noise of C172. Through this, it is intended to understand what type of noise training aircraft affect in future studies.

In this study, a finite element analysis was used to analyze the stress state and vibration characteristics generated by continuous contact between wheels and rails when driving urban railway vehicles. The rails applied to the analysis were divided into straight and curved shapes, and three-dimensional modeling was performed to analyze the changes in structural characteristics of wheels and rails when driving on straight and curved rails. As a result of the analysis, the stress characteristics were up to 6.5 MPa on a straight rail and 9.81 MPa on a curved rail, and it is believed that this increase in stress will increase noise due to an increase in friction at the interface. The vibration characteristics of the wheels and rails showed similar behavior from the 3rd mode to the 9th mode of the rail to the intrinsic vibration characteristics from the 4th mode to the 6th mode of the wheel.