In this study, the cooling capacity and the pressure drop of a condenser for 10kW refrigerator unit were experimentally investigated. The performance characteristics of the condenser was studied by changing the fin shape(4 types), fin pitch(5 types), tube row(4 types) and air flow rate(6 types), using the calorimeter. The optimum heat exchanger specifications were selected by comparing the capacity and the pressure drop of the condenser. In order to select the heat exchanger suitable for the condenser for 10kW refrigerator unit, both the cooling capacity and the pressure drop should be considered. From the condenser performance test by pin type, the wavy pin was selected. The optimal performance of the condenser for 10kW refrigerator unit was observed at the fin pitch of 3 mm, the tube row of 4 row, and the air flow rate of 90㎥/min.

The disadvantage of the current Red imported fire ants (RIFA) diagnostic is that it takes at least two days, because it is subjected to PCR amplification and DNA sequence identification process using an arthropod universal mitochondrial cytochrome oxidase I prime pair after genomic DNA extraction. In order to overcome this drawback, two RIFA specific genes were confirmed and used to develop techniques for identifying the species using various PCR methods. The conventional PCR method can be confirmed by the presence of amplified DNA, but additional time is required to confirm whether the PCR products are present or not. In contrast, SYBR green Real Time (RT) PCR or TaqMan probe RT PCR method has the advantage of confirming the results immediately after the reaction is completed. The new molecular diagnostic method has the advantage of shortening the time of two days, which is the biggest disadvantage of RIFA molecular diagnostic method, to 3 hours or less.

To reduce subway passengers’ exposure to PM 10 (particulate matter less than 10 micrometers), management of PM 10 concentration in underground stations is critical. In this study, we attempted to investigate the distribution of airflow PM 10 concentration in an underground station. The numerical simulations were performed using computational fluid dynamics. In order to apply to CFD, measurement of air volume (supplied and exhausted air) and PM 10 concentration were conducted at the concourse and platform areas of the underground station. The results of the simulation agreed with the actual PM 10 concentration, and we confirmed the distribution of PM 10 concentration depending on air volume conditions. This result will be helpful to reduce the PM 10 in an underground station when using ventilation system.

In this study, 40 residents of the Gwangyang and Yeosu areas were assessed for their level of exposure to heavy metals (As, Cd, Ni) from April 2017 to June 2018. The aim was to understand the differences in levels of indoor exposure to heavy metals (As, Cd, Ni), and a health risk assessment was conducted to determine whether there was any fatal cause from carcinogenic elements. The mean concentrations of PM10 particles indoors were As 0.24 μg/m3, Cd 0.07 μg/m3, and Ni 0.89 μg/m3. The health risk assessment for the arsenic, cadmium, and nickel in indoor air confirmed that the mean values exceeded the cancer risk tolerances specified by the U.S. EPA, for As (males 3.07 × 10−4, females 3.35 × 10−4), Cd (males 3.83 × 10−5, females 4.18 × 10−5), and Ni (males 6.36 × 10−5, females 6.95 × 10−5).

Surface plasmon resonance is the resonant oscillation of conduction electrons at the interface between negative and positive permittivity material stimulated by incident light. In particular, when light transmits through the metallic microhole structures, it shows an increased intensity of light. Thus, it is used to increase the efficiency of devices such as LEDs, solar cells, and sensors. There are various methods to make micro-hole structures. In this experiment, micro holes are formed using a wet chemical etching method, which is inexpensive and can be mass processed. The shape of the holes depends on crystal facets, temperature, the concentration of the etchant solution, and etching time. We select a GaAs(100) single crystal wafer in this experiment and satisfactory results are obtained under the ratio of etchant solution with H2SO4:H2O2:H2O = 1:5:5. The morphology of micro holes according to the temperature and time is observed using field emission - scanning electron microscopy (FE-SEM). The etching mechanism at the corners and sidewalls is explained through the configuration of atoms.

The objective of this study is to investigate the earthquake response for the design of 100m spanned single-layer lattice dome. The plastic hinge analysis and eigenvalue buckling analysis are performed to estimate the ultimate load of single-layered lattice domes under vertical loads. In order to ensure the stability of lattice domes, it is investigated for the plastic hinge progressive status by the pushover increment analysis considering the elasto-plastic connection. One of the most effective methods to reduce the earthquake response of large span domes is to install the LRB isolation system of a dome. The authors discuss the reducing effect for the earthquake dynamic response of 100m spanned single-layered lattice domes. The LRB seismic isolation system can greatly reduce the dynamic response of lattice domes for the horizontal and vertical earthquake ground motion.