검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 2,982

        201.
        2020.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 다공성 활성탄소와 금속유기골격체 복합재료 기반의 전극 재료와 “이온젤” 이라고 불리는 고분자 고체 전해질을 이용하여 슈퍼커패시터를 제작 하였으며, 금속유기골격체의 함량에 따른 전기화학적 거동을 관찰하여 보았다. 슈퍼커패시터의 전기화학적 특성은 순환전압전류법(CV), 전기화학적 임피던스 분광법(EIS) 및 전정류 충·방전법(GCD)으로 분석하였으며, 그 결과로, 다공성 활성탄소 대비 금속유기골격체를 0.5 wt% 첨가 하였을 때 가장 높은 전기용량값을 확인 할 수 있었으며, 0.5 wt% 이상의 금속유기골격체의 함유량은 전기화학적 특성 감소에 영향을 주는 것으로 사료되며, 이러한 결과를 바탕으로 제조된 다공성 활성탄소/금속유기골격체 복합재료 기반의 슈퍼커패시터는 다양한 분야에 활용이 가능 할 것으로 판단된다.
        4,000원
        202.
        2020.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        흰점박이꽃무지 (Protaetia brevitarsis) 유충은 동아시아에서 식용 및 약용으로 널리 사용되고 있다. 흰점박이꽃무지 수요 증가로 인해 유충의 대량 사육 방법이 필요하지만 좁은 공간에서 대량으로 유충을 사육할 경우 곤충 병원성 질병 감염에 취약해진다. Metarhizium anisopliae는 흰점박이꽃무지 유충에 치명적인 곤충 병원성 곰팡이 중 하나이다. 이를 저해하기 위해 항진균 성분이 함유된 옻나무 (Rhus verniciflua Stokes) 추출액을 첨가하였고, 연구 결과 1% 옻나무 추출액을 첨가한 경우 녹강균에 의한 유충의 치사율이 유의미하게 낮았다. 또한 일반톱밥을 급여한 대조구에 비해 옻나무 추출액 처리구에서 유충의 무게가 더 무거웠고 유충 기간이 짧아 지는 것을 확인하였다. 따라서 이 연구를 통해 곤충 병원성 곰팡이에 대한 옻나무 추출액의 항진균 효과를 확인할 수 있었으며 흰점박이꽃무지 유충 사육 시 옻나무 추출액을 첨가 하여 급여한다면 병원성 곰팡이에 의한 유충의 치사율을 낮추고 증체량을 높이는 데 효과가 있을 것이다.
        4,000원
        203.
        2020.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        호소 생태계에 대한 생물측정망 조사 및 평가지침은 동물플랑크톤 조사의 편의성을 고려하여 출현 종 수와 개체 군밀도, 군집 지수 등을 상대적으로 비교하기 위해 수심 5 m 이하의 얕은 호소-수변부에서 사선끌기, 수심 20 m 이상 호소-전수심 수직끌기, 그 이상의 깊은 호소-20 m까지의 수심을 대상으로 한 수직끌기를 제시하고 있다. 본 연구에 서는 지침에서 제시하는 방법 중 사선끌기법과 20 m 수직 끌기법을 각각 전수심을 대상으로 한 조사 방법과 비교하여 동물플랑크톤 군집 정보의 차이 및 특성에 대해 분석 하였다. 군집 지수의 경우 수심이 얕은 호수에서의 사선끌 기법/수직끌기법 비교에서는 차이를 보이지 않은 반면, 수 심이 깊은 호소에서는 끌기 수심을 20 m로 제한할 경우보다 전수심 수직끌기를 적용했을 때 다양도 및 풍부도 지수 가 상승하는 것으로 나타났다. 또한, 사선끌기 및 20 m 수직끌기를 통해 채집한 동물플랑크톤 시료로부터 표면~저층 상층부까지의 전수심을 채집 대상으로 설정한 경우보 다 약 3배 정도 높은 개체군 밀도가 계산되어, 동물플랑크톤 총 개체 밀도가 크게 과대 평가되는 것으로 나타났다. 이러한 차이는 동물플랑크톤 수직 분포 특성상 발생하는 수층별 동물플랑크톤 개체 밀도 차이 및 여과된 원수량의 차이에서 비롯된 결과로 판단되며, 이에 따라 호소를 대변 하여 수체 간 또는 수체 내 변동을 보다 정확히 파악하고 호 내 2차 생산과 관련한 기능적 정량 지표로서 동물플랑크톤 군집 정보의 활용을 고려할 경우, 수심에 따른 개체 군밀도 분포와 전체 개체수 환산 시 수층별 기여율을 고려한 전수심 수직끌기 방법의 적용이 보다 적절할 것으로 분석되었다.
        4,000원
        204.
        2020.12 KCI 등재 구독 인증기관·개인회원 무료
        중국에서도 민법전시대가 정식으로 도래하였다. 중국의 민법전이 2020년 5월 28일 제13기 전국인민대표대회 제3차회의에서 통과되어 2021년 1월 1일부터 제정, 시행된다. 이 민법전은 1949년 이후 분산되 어 기존의 민사관련법을 체계적으로 통합, 보완하여 만든 것으로서, 중국 에서 처음으로‘법전’이라고 명명한 법률이다. 민법전의 시행과 동시에 현 행 중국의 혼인법, 상속법, 민법통칙, 민법총칙, 입양법, 담보법, 계약법, 물권법, 권리침해책임법 등은 폐지된다. 이 민법전은 제1편 총칙, 제2편 물권, 제3편 계약, 제4편 인격권, 제5편 혼인가정, 제6편 상속, 제7편 권 리침해책임(불법행위) 등 7개 편과 1260개의 조문 및 부칙으로 구성되 어 있다. 중국 민법전은 독일식 판덱텐 체계를 따랐으나 독일식 5편제가 아닌 7 편제를 취하고 있다. 채권편을 계약편과 불법행위책임편으로 나누고 인 격권편을 추가한 것이 특색이라고 할 수 있다. 여기에서 인격권편의 내 용은 기존 독일법계 민법을 가진 국가들이 인격적 이익을 불법행위편에 의하여 사후적 보호를 강조하였다면 중국 민법전은 사전적 보호를 포함 한 체계적이고 총체적인 보호를 규정하고 있다. 민법전 시행에 이어 후 속적 조치로 그의 구체적인 적용을 위한 관련 사법해석이 만들어질 것으 로 보이며, 인격권 신설 등 시대적 요구와 중국 특색들을 반영한 것은 중국 민법의 현대화와 중국화의 요구를 적절하게 반영한 것이라고 할 것 이다.
        205.
        2020.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Generally the non-bearing walls in apartment buildings in Korea are not considered as a lateral force resisting members for the design consideration. This engineering practice caused large crack damages and brittle fractures of the non-bearing walls when subjected to Pohang earthquakes in 2017 since those have not been designed for seismic loading. In this study, finite element analysis was conducted for slot type non-bearing wall connection system to reduce damages and concentrate damages to the designated damping device through separation from the structural wall members. Steel plate and dowel bar systems designed for the dissipation of seismic energies were modeled and analyzed to investigate the damage reductions. Finally, the test result and the analysis result were compared and verified.
        4,000원
        206.
        2020.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The fluctuating wind pressure of the low rise ratio(f/D=0.1) for the elliptical dome roof was analyzed to compare it with the previous studies of circular dome roofs. Wind tunnel test were conducted on a total of 10 wind directions from 0° to 90° while changing wall height-span ratios(H/D=0.1-0.5). For this, meanCP, rmsCP and wind pressure spectrum were analyzed. The analysis result leads to find differences in the shape of the spectra in the spanwise direction and leeward of the elliptical dome according to the wind direction variations of the elliptical dome roof.
        4,000원
        208.
        2020.12 구독 인증기관 무료, 개인회원 유료
        This paper compares the preceding study on the development of evaluation indicator for ATOs for mechanics and vocational ability evaluation system implemented by the Ministry of Employment and Labor to support various vocational training. This paper also examines the systems for the protection and possible options of the consumer through disclosed notification and evaluation cases such as the traffic service evaluation system in the aviation sector. By extension, in order to ensure quality management and enhanced capability of flight schools, this paper aims to present a methodology for introducing an evaluation model certified by ATOs for pilots that emerges from comparing the preceding study on various vocational training applied with the CIPP evaluation model of Stufflebeam and the procedures for the designation of ATOs for pilots and follow-up management thereon in Korea, dividing it into four stages, which are the preparation stage, screening stage, designation stage and management stage, and applying the items and performance indicators to be carried out at each stage.
        4,300원
        209.
        2020.11 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The physicochemical properties of Korean rice flour cultivars (Saemimyeon [SM], Hanareum No. 4 [HA], and Milyang No. 328 [MY]) with different amylose contents were analyzed and the effects of rice flour blending on their physicochemical property changes were investigated in this study. The swelling power of three different cultivars was similar at 60oC, but MY showed significantly enhanced swelling power at 80oC compared to SM and HA. In the pasting profile, MY showed significantly lower final and break-down viscosities than SM and HA due to its weak granular rigidity. In the case of the 1:1 blending of SM-MY and HA-MY, the measured values of swelling power and solubility were greatly decreased at 80oC, and the setback and final viscosity were significantly increased compared to their predicted arithmetic average values, showing the non-additive effects of blending. For the dynamic viscoelastic properties, SM-MY and HA-MY showed significantly decreased G’ and increased k’ and tanδ, compared to their predicted average values. In conclusion, the selected rice flour blends had non-additive effects on swelling power, solubility, pasting, and dynamic viscoelastic properties. These results showed the feasibility of the rice flour blending to diversify the physicochemical properties of rice flour for better processing suitability.
        4,000원
        210.
        2020.11 KCI 등재 구독 인증기관 무료, 개인회원 유료
        When kimchi is frozen and thawed, the amount of lactic acid bacteria (LAB) and yeast is usually reduced by more than 2 logs, and its texture including its crispness and hardness are changed significantly. As a possible means to minimize these problems, various freezing (direct freezer with -25, -40, and -60oC and plate freezer with -40oC) and thawing methods (radio frequency (RF) thawing, plate thawing, and room temperature thawing) were investigated in terms of the amount of LAB and texture of kimchi. From the use of plate freezing and plate thawing, the amount of LAB of white cabbage kimchi could be maintained by more than 10% of its initial amount while that for red cabbage kimchi could be maintained by more than the initial amount. Pretreatment with trehalose (19 oBrix soluble solid content) to salted Chinese cabbage could maintain kimchi’s hardness and crispness. In order to maintain the texture and the amount of LAB in kimchi, the use of the plate freezer (-40oC) and the plate thawing (20oC) seemed to be effective with the assistance of trehalose.
        4,000원
        211.
        2020.11 구독 인증기관·개인회원 무료
        현재 매실산업은 산지 가공율이 매우 낮으며, 농가소득 향상 및 소비시장 활성화를 위한 다양한 가공제품 개발 이 필요하다. 하지만 매실은 수확 기간이 짧고 장기 저장도 어려운데다 가공 공정이 체계화되어 있지 않고 생산성 이 낮아 가공제품 개발에 어려움이 많다. 이러한 점을 해결하기 위해 산지 중심으로 이루어지는 매실 절임가공의 전과정 기계화 시스템을 개발하는 연구를 진행하고 있다. 본 연구에서는 매실 절임가공 전과정 최적화와 기계화 시스템 개발의 기초자료로 쓰기 위해 가공제품별 절임가공 전과정 작업공정을 조사하고 분석하였다. 본 연구에서 조사한 매실 절임가공 제품은 매실절임, 매실 고추장 장아찌, 베리류를 활용한 매실 절임, 씨바른(없는) 매실당절 임, 우리 입맛에 맞춘 일본식 매실 장아찌(우메보시) 등으로 다양하였다. 이와 같은 매실 절임제품 작업공정에서의 공통 공정은 세척 및 물기 제거 → 과육절단 및 씨 분리 → 부재료 혼합 및 밀봉포장 → 1차숙성 → 용출액과 과육 분리 및 물기 제거 → 2차 부재료혼합 및 밀봉포장 → 2차 숙성 → 제품 출하 또는 2차 가공품 생산 순으로 정리할 수 있다. 조사결과를 분석해 보면 매실 절임가공은 공통 공정은 있으나 지역이나 업체마다 공정이 천차만별이고, 같은 공정이라 하더라도 지역이나 업체마다 작업방법, 설비 등이 다양하며, 체계적이고 합리적인 공정 구성에 대 한 인식 부족으로 효율적이고 생산적인 공정 구성이 미흡한 것으로 나타났다. 따라서 매실 절임가공 공정 최적화 를 위해 천차만별인 공정을 표준화하는 것은 현실과 동떨어지므로 공정 표준화보다 공통되는 단위 공정별 기계화 가 필요한 것으로 판단된다. 또한 절임제품에 따라 상이한 공정이 있어 전과정 기계화는 매우 어려우므로 제품 또 는 사용자 형편에 따라 사용자가 공정에 맞는 기계를 선택할 수 있는 방향이 바람직할 것으로 판단되었다. 이러한 결과를 바탕으로 공정별 최적화된 설비·설계를 위해 수확후 매실의 세척, 탈수, 씨제거, 절단 등의 공정과 단위공 정별 처리시간과 성능, 투입인원 등을 시뮬레이션을 통해 매실 절임가공 기계화 시스템 최적 설계안을 도출할 계 획이다.
        212.
        2020.11 구독 인증기관·개인회원 무료
        대표적인 매실 가공제품인 당절임식품의 제조과정은 먼저 선별기로 낙과, 찰과 등을 분리·제거하고 세척하여 수 분을 제거한 후 길이방향으로 6-7 조각으로 절단하여 씨를 분리한다. 그러나 매실은 수확기가 고온기로 수확기간 이 짧아 장기저장이 어려우며 생과로 이용할 수 없어 수확 즉시 가공해야 한다. 이와 같은 매실 특성 때문에 수확 즉시 안정적인 가공을 위해서는 모든 공정의 기계화가 뒷받침되어야 한다. 따라서 본 연구에서는 세척부터 완제품 포장까지 매실 절임 제품 생산 전과정 기계화에 필요한 기초자료를 얻기 위해 매실 세척 및 탈수 시스템을 제작하 고 시험하였다. 본 연구에서 제작한 세척장치는 세척조에서 순환펌프에 의해 분출되는 물줄기와 터지는 공기방울에 복합적으로 세척되며, 상승컨베이어로 이송되면서 헹굼세척이 된다. 세척수는 보조 물탱크의 거름망에 이물질이 걸 러져 재순환 된다. 탈수장치는 세척된 매실을 매시벨트 컨베이어로 이송시키면서 송풍기의 고속·고풍량 바람으로 연속해서 탈수된다. 시험재료는 2020년 6월 수확된 전남 순천 매실로 옥영 L, 남고 L 및 2L이었다. 세척 시험은 옥 영을 공급량별 3수준(10, 20, 30kg)로 세척 전후 탁도를 비교하였다. 세척 및 탈수 시험은 남고 L, 2L에 대해 세척과 탈수를 연속으로 하면서 세척 전후 탁도, 세척한 매실의 탈수율, 작업시간을 측정하였다. 탁도는 세척 전후 매실 300g를 증류수 500ml로 3분 동안 세척 후, 600rpm 30초 동안 진탕하여 10ml씩 수질측정기(90-FLT, TPS, USA)로 측 정하였다. 세척수 온도변화를 측정하였으며, 매실에 손상 여부를 살펴보았다. 모든 시험은 3반복하여 평균값으로 나 타내었다. 시험결과, 옥영의 세척 전 탁도(ppm)는 공급량별로 각각 9.6, 11.8 및 12.3이었으나 세척 후 탁도는 각각 4.5, 4.2 및 5.5으로 세척 정도를 수치로 확인할 수 있었다. 남고 L 및 2L의 세척 및 탈수 시험결과 탁도(ppm)는 세 척 전 13.5, 23.4이었으나 세척 후 8.0, 12.0으로 낮아졌다. 옥영에 비해 남고의 탁도가 높았는데 이는 한여름에 수 확되어 시험 기간 동안 일부가 물러진 남고의 과즙 때문인 것으로 보인다. 탈수 시험결과 세척 시 매실에 묻은 물 기의 31.2%, 38.2%를 제거하는 것으로 나타났다. 손상 매실은 없었으며, 시험에 걸린 시간(초)은 900.3~912.0이었다. 세척수 온도는 0.5℃가 상승하여 매실에는 영향이 없을 것으로 판단되었다. 본 연구로 매실의 세척 및 탈수 정도를 수치로 볼 수 있었다. 그러나 세척 전후 품질 등의 분석, 30% 남짓한 탈수율을 높이기 위한 연구가 필요하다. 이를 바탕으로 세척부터 포장까지 매실 절임가공 생산 전과정 기계화 연구로 이어가야 할 것이다.
        216.
        2020.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The premature failure of the universal joint connecting the drive gear box and the cooling fan caused a deterioration in serviceability and operability. Universal joint is a device that transmits engine power to a cooling fan. Internal pin breakage and shaft separation can cause secondary damage such as cooling fan malfunction and radiator damage caused by component failure. The purpose of this paper is to analyze the damage phenomenon of universal joints caused by bundles in SPVs and to improve them. In order to verify the improvement, a single part test and a system conformance test were conducted, and durability test was conducted to confirm the improvement effect on the improved prototype. Through these, the effects of increasing the durability of the improved product were estimated.
        4,000원
        217.
        2020.10 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        Effects of Sc addition on microstructure, electrical conductivity, thermal conductivity and mechanical properties of the as-cast and as-extruded Al-2Zn-1Cu-0.3Mg-xSc (x = 0, 0.25, 0.5 wt%) alloys are investigated. The average grain size of the as-cast Al-2Zn-1Cu-0.3Mg alloy is 2,334 μm; however, this value drops to 914 and 529 μm with addition of Sc element at 0.25 wt% and 0.5 wt%, respectively. This grain refinement is due to primary Al3Sc phase forming during solidification. The as-extruded Al-2Zn-1Cu-0.3Mg alloy has a recrystallization structure consisting of almost equiaxed grains. However, the asextruded Sc-containing alloys consist of grains that are extremely elongated in the extrusion direction. In addition, it is found that the proportion of low-angle grain boundaries below 15 degree is dominant. This is because the addition of Sc results in the formation of coherent and nano-scale Al3Sc phases during hot extrusion, inhibiting the process of recrystallization and improving the strength by pinning of dislocations and the formation of subgrain boundaries. The maximum values of the yield and tensile strength are 126 MPa and 215 MPa for the as-extruded Al-2Zn-1Cu-0.3Mg-0.25Sc alloy, respectively. The increase in strength is probably due to the existence of nano-scale Al3Sc precipitates and dense Al2Cu phases. Thermal conductivity of the as-cast Al-2Zn-1Cu-0.3Mg-xSc alloy is reduced to 204, 187 and 183 W/MK by additions of elemental Sc of 0, 0.25 and 0.5 wt%, respectively. On the other hand, the thermal conductivity of the as-extruded Al-2Zn-1Cu-0.3Mg-xSc alloy is about 200 W/Mk regardless of the content of Sc. This is because of the formation of coherent Al3Sc phase, which decreases Sc content and causes extremely high electrical resistivity.
        4,000원
        218.
        2020.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        당화공정이 간편한 장점이 있는 팽화미의 이용성을 높이기 위하여 팽화미를 당화한 후 항산화 효과가 좋은 레몬밤을 첨가하여 알코올 발효를 하고, 이를 이용하여 제조한 식초의 품질 특성과 항산화 활성을 조사하였다. 효소로 당화한 팽화미에 레몬밤 추출물을 농도별로 첨가하여 Saccharomyces cerevisiae KCCM 11201로 알코올 발효 후 알코올 함량 6% 및 초기 산도 2%로 조절한 다음, Acetobacter aceti KCCM 40229로 30oC, 200 rpm로 15일간 초산 발효를 하여 식초를 제조하였다. 팽화미 식초의 pH 및 알코올 함량은 발효가 진행되면서 전체적으로 감소하였고, 총산은 발효 15일째 5.20±0.01%(레몬밤 2.0%)-5.80±0.01%(레몬밤 0.0%)로 레몬밤 첨가량이 증가할수록 총산이 약간 낮게 나타났다. 팽화미 식초의 유기산 함량은 발효 15일에 5.26%(레몬밤 2.0%)-5.97%(레몬밤 0.0%)이었으며, acetic acid의 함량이 가장 높았다. 팽화미 식초의 총 폴리페놀 함량과 총 플라보노이드 함량은 레몬밤 첨가량이 많을수록 함량이 높았으며, 발효 15 일에 각각 179.4±4.5 mg/kg(레몬밤 0.0%)-340.8±2.6 mg/kg(레몬밤 2.0%) 및 1.5±0.3 mg/kg(레몬밤 0.0%)-31.7±0.3 mg/ kg(레몬밤 2.0%)이었다. 레몬밤 첨가량이 많을수록 DPPH 라디칼 소거 활성, FRAP(환원력) 및 ABTS 라디칼 소거 활성이 높게 나타나 레몬밤 2.0% 처리구는 발효 15일에 각각 82.99±0.61%, 1.08±0.01 abs.(at 593 nm), 87.67±0.68%를 나타냈다. 본 연구결과 레몬밤을 첨가한 팽화미 식초가 항산화 활성을 갖는 식초로 활용될 수 있는 가능성이 있다는 것을 확인하였다.
        4,000원
        219.
        2020.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The enamel powders used traditionally in Korea are produced by a ball-milling process. Because of their irregular shapes, enamel powders exhibit poor flowability. Therefore, polygonal enamel powders are only used for handmade cloisonné crafts. In order to industrialize or automate the process of cloisonné crafts, it is essential to control the size and shape of the powder. In this study, the flowability of the enamel powders was improved using the spheroidization process, which employs the RF plasma treatment. In addition, a simple grid structure and logo were successfully produced using the additive manufacturing process (powder bed fusion), which utilizes spherical enamel powders. The additive manufacturing technology of spherical enamel powders is expected to be widely used in the field of cloisonné crafting in the future.
        4,000원
        220.
        2020.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES : In this study, the relationship between the types of road pavement markings and the visibility distance under adverse weather conditions was evaluated. METHODS : Rainy and foggy conditions at the weather proving ground were replicated in this study. The researchers recorded the visibility distance corresponding to each experiment scenario comprising the weather conditions and pavement marking types. RESULTS : Visibility distances under adverse weather conditions decreased more than those of normal weather conditions. Under rainy conditions, the average visibility distance across all pavement markings decreased by 33%. However, the average visibility distance across all pavement markings foggy conditions decreased by 46.8%. Based on the test results of the visibility distance, the speed reduction rates corresponding to the adverse and normal weather conditions, i.e., 24% and 36% speed reduction under rainy and foggy conditions, respectively, were established. CONCLUSIONS : This study validated the reduction in the visibility distance affected by weather conditions by applying actual road scale weather proving ground. In addition, speed reduction was recommended for safe driving under adverse weather conditions.
        4,000원