바이오디젤은 중립연료로써 친환경 연료로 알려져 있으며, 육상에서는 일정 비율을 의무 혼합하는 정책을 시행하고 있다. 본 연구에서는 바이오디젤의 선박 연료로써의 사용 가능성을 검증하기 위해 선박용 경유와 바이오디젤의 혼합비율 0 %, 5 %, 10 %, 20 %에 대해 성분 분석, 금속 부식성 실험, 저장 안정성 실험을 수행하였다. 성분 분석은 ISO 8217:2017 기준에 따라 밀도, 동점도, 인화점 등 총 8가지를 평가하였으며, 180일 동안 상온과 가혹 조건(60 ℃)에서 금속 부식성 실험과 저장 안정성 실험을 통해 바이오디젤 신뢰성을 검증 하였다. 연구 결과, 성분 분석은 바이오디젤 모든 혼합비율에서 ISO 8217:2017 기준을 만족하였으며, 바이오디젤 비율에 따라 동점도, 밀 도, 산값은 혼합비율이 높아질수록 높게 나타났으며, 황분은 혼합비율이 높아질수록 낮게 나타났다. 금속 부식성은 탄소강, 철, 알루미늄, 니켈의 경우 부식이 거의 발생하지 않았으나, 구리의 경우 60 ℃ 환경 바이오디젤 20 % 혼합에서 산소가 풍부한 바이오디젤의 영향으로 부식이 발생하였다. 저장 안정성은 모든 바이오디젤 혼합비율을 180일 동안 상온과 가혹 조건에서 저장한 결과, 변색, 슬러지 발생, 연료 분리가 육안으로 확인되지 않았다.

The cutting process, which is a key processing technology in various industrial fields is achieving continuous growth, and the demand for high-quality cutting surfaces is continuously demanded. Plasma cutting continues to be studied for its excellent workability and productivity, but problems with cutting surface quality such as dross formation occur, so research to secure excellent cutting surface quality through appropriate control of process variables is essential. In this study, we propose a method for predicting surface roughness using real-time current and cutting speed data obtained while performing plasma cutting on A106 B steel pipe. Surface roughness was predicted based on the RBF algorithm applicable to prediction and control models. It was shown that the surface roughness of the plasma cutting surface can be predicted with the arc current waveform and process speed data. This study can be used as a basic study to control the surface roughness of the cut surface in real time.

The following results were obtained by conducting a flow experiment. The experiment with air volume showed that the ducts with 3 shapes in the same cross-sectional area were large in the order of circular duct, square duct, and flexible duct. As a result of measuring the pressure value by duct shape to determine the cause of the difference between the flow rate and the air volume value by duct, the negative pressure was large in the order of circular duct, square duct, and flexible duct. in the countercurrent test, In the case of circular ducts, the deviation was high, In the case of Flexible ducts, the mild increase in the countercurrent is judged to be the difference in pressure and friction received by shape.

In this study, machine learning models are proposed to predict the Vickers hardness of AlSi10Mg alloys fabricated by laser powder bed fusion (LPBF). A total of 113 utilizable datasets were collected from the literature. The hyperparameters of the machine-learning models were adjusted to select an accurate predictive model. The random forest regression (RFR) model showed the best performance compared to support vector regression, artificial neural networks, and k-nearest neighbors. The variable importance and prediction mechanisms of the RFR were discussed by Shapley additive explanation (SHAP). Aging time had the greatest influence on the Vickers hardness, followed by solution time, solution temperature, layer thickness, scan speed, power, aging temperature, average particle size, and hatching distance. Detailed prediction mechanisms for RFR are analyzed using SHAP dependence plots.

다양한 불교 수행법들이 국내에 알려지고, 명상 또한 대중화되고 있다. 불교 수행방법을 과학화하여 다양한 심리치유법이 개발되어 유용하게 활 용되고 있다. 이러한 흐름 속에서, 연구자는 불교의 기본 개념 중 하나인 사띠(sati)의 중요성에 주목했다. 사띠에 대응하는 한글 번역어는 ‘마음챙 김’, ‘알아차림’ 등으로 제시되지만, 명료한 합의가 이루어지지 못했다. 이것은 사띠 개념의 복잡성을 시사한다. 본 논문은 문헌연구와 함께 사띠에 관한 실제 사례를 연결하는 의미 있는 연구다. 본 논문의 목적은 사띠의 실천 사례를 관찰하기 어려운 국 내의 연구 상황에서 계율 실천과 사띠 훈련의 연관성을 파악하고자 했다. 태국의 승려들이 빠알리어 계본에 명시된 항목을 어떻게 실천하는지 조 사하여, 논의함으로 국내의 사띠 연구에 좋은 자료를 제공함과 동시에 수 행 및 일상에서의 사띠 실천 가능성을 높이고자 한다.

This study focused on using indirect filtration through riverbeds to produce high-quality drinking water. Data on water quality from a water intake facility(capacity 10,000 m3/day) and nearby rivers were collected over a three-year period. The average intake facility specifications were found to be a specific surface area of 58 balls/m2, a mean particle size of 24 mm, an inflow velocity of 2.2 cm/sec, and a burial depth of 5 m. The water quality improvement rate was assessed as grade Ia, surpassing the adjacent river’s water quality. Correlation analysis showed a weak correlation between opening ratio, Suspended Solid (SS), and Biochemical Oxygen Demand (BOD) compared to total coliforms and fecal coliforms. The correlation coefficient R value of SS was -0.614, BOD was –0.588, total coliforms -0.870, and fecal coliforms -0.958. The R value shows a negative value, which showed that the larger the opening rate, the lower the removal rate of water pollutants. The correlation coefficient R values according to the depth of burial were found to be BOD 0.914, SS-0.124, total coliforms 1.000, and fecal coliforms 0.866. The deeper the burial depth, the higher the removal rate of BOD and microbial groups.

우리나라는 무기질비료 사용량이 많은 나라 중 하나이다. 그러나 1980년 이후 지속가능농업에 대한 필요성에 의해 1997년 친환경 농업육성법이 제정되었고 지속가능한 농업을 위한 연구로 논, 밭, 시설 및 과수에 대한 비료사용실태조사가 실시되고 있다. 이에 본 연구는 과수 중 대표되는 7작물(배, 포도, 사과, 복숭아, 대추, 단감, 키위)을 대상으로 각 도에서 805농가를 선정하여 실시하였으며, 조사내용은 사용하는 비료의 종류, 사용량 등에 대해 농가를 방문하여 면접 청취조사하였다. 국내 과수작물의 성분별 평균 비료사용량(N-P2O5-K2O)은 30.0-23.8-24.3 kg 10a-1이었으 며 비료 종류별로 구분하였을 때 퇴비 > 유기질비료 > 무기질비료 순으로 사용하고 있었다. 단위면적당 가장 많은 비료를 사용하고 있는 과수는 대추로 질소, 인산 및 칼리를 평균 53.3-42.0-49.5 kg 10a-1을 사용하고 있는 것으로 확인되었다. 앞으로 지속가능 농업과 농업환경의 보전을 위해서는 농가에서 사용하는 비료의 장기간 모니터링 뿐만 아니라 농업인에게 무기질비료, 유기질비료 및 퇴비의 적정사용방법에 대한 교육 및 홍보를 지속적으로 실시해야 될 것으로 판단된다.

본 연구에서는 현탁중합을 통해 이온교환입자를 합성하였다. 또한 음이온 교환막을 제조하기 위해 brominated poly(phenylene oxide) (Br-PPO)로 교환막 합성을 진행하였으며, 합성한 이온교환입자를 Br-PPO에 첨가하여 음이온 교환막 에 성능을 향상시키고자 하였고, 이를 적용하여 음이온 교환막 연료전지 시스템의 성능 평가를 진행했다. 이온교환입자는 FT-IR, TGA 및 UTM을 통해 구조 분석, 열적 기계적 특성을 평가하였다. Br-PPO는 NMR을 통해 화학적 구조 분석 및 합성 여부를 확인하였고, 음이온 교환막 연료 전지 셀 테스트를 진행하기 전 이온전도도와 이온교환용량, 팽윤도 및 수분함수율을 측정해 연구되고 있는 다른 음이온 교환막들과 비교를 통해 성능을 평가했다. 최종적으로 가장 성능이 우수했던 이온교환입 자를 0.7 wt%를 첨가한 Br-PPO-TMA- SDV 음이온 교환막을 연료전지 시스템에 도입하여 상용 막인 FAA-3-50과 성능을 비 교했다.

In this study, sustainable utilization plans were proposed by reviewing the current status and problems of water infrastructure, focusing on water supply and sewage system in Chungcheongnam-do. Due to the regional characteristics of the rural areas in Chungcheongnam-do which has a very low urbanization rate, there is a difference in the level of water welfare services between local governments. Compared to other governments, there are relatively many small water facilities, resulting in a service imbalance in terms of tap water safety. In addition, Chungcheongnam-do has a structure that is very vulnerable to water security to cope with climate change and drought due to its high dependence on wide-area water supply. Therefore, it should be considered in consideration of population reduction and local extinction due to low birth rate and aging population. Rural areas should clearly establish marginal areas for the supply of water and sewage, and implement regional customized water and sewage projects in consideration of local extinction. Water supply projects should be implemented in a distributed water supply method using various water sources. In order to respond to climate change and establish water security, a distributed water supply system should be established through a multi-source water loop system using various water sources. Sewage projects should be establish public sewage treatment facilities in consideration of the priorities of each local government, focusing on local governments with low sewage treatment population rates. In consideration of regional characteristics, it is necessary to consider the installation of private sewage treatment facilities or nature-friendly treatment facilities such as soil infiltration and artificial wetlands. An integrated management system using Internet of Things(IOT) or Information and Communications Technology(ICT) should be established and operated to improve the operation and management efficiency of small-scale water supply and sewage facilities.

Paddy fields provide important habitats for biodiversity conservation within the agricultural ecosystem. Their importance is gradually increasing as their ecological value is better understood. Benthic macroinvertebrates dominate paddy fields. They play an essential role in maintaining the biodiversity of paddy ecosystems. This study aimed to analyze characteristics of benthic macroinvertebrate communities and main environmental factors affecting the distribution of golden apple snails (Pomacea canaliculata). Results showed that the diversity index (H ′) of the benthic macroinvertebrate community was the highest at the Sangju site (St. 12) but the lowest at the Sancheong site (St. 18). Total Dissolved Solids (TDS), salinity, and Electrical Conductivity (EC) values were the highest in Gimhae and Yeongam based on Canonical Correspondence Analysis (CCA). Numbers of P. canaliculata (m-2) were relatively low in Gunsan and Iksan where water temperatures were high. Therefore, changes in geographical characteristics and environmental factors might affect the distribution of P. canaliculata and characteristics of benthic macroinvertebrate communities. Results of this study can be used as primary data for biodiversity conservation and ecosystem service evaluation in agroecosystems.

This study assessed the measurement technique of odorous substances using a GC/MOS system with MOS sensor at the detector and the method detection limits were determined for odorous substances such as hydrogen sulfide, acetaldehyde, toluene, m,pxylene, and o-xylene. The portable GC/MOS system was able to separate and measure about 16 out of 22 odorous substances including sulfur compounds, aldehydes, and VOCs. The peak values for hydrogen sulfide, acetaldehyde, toluene, m,p-xylene, and o-xylene showed a nonlinear relationship with concentration and a correlation coefficient of 0.95 or higher was confirmed. The method detection limits for hydrogen sulfide, acetaldehyde, toluene, m.pxylene, and o-xylene using the portable GC/MOS system were determined to be 0.005, 0.023, 0.016, 0.004, and 0.051 ppm, respectively. It is expected that the system can measure odor samples with concentrations of least 50 ppb without additional pretreatment or concentration processes.

Gate valves are hydraulic components used to shut-off the water flow in water distribution systems. Gate valves may fail owing to various aspects such as leakage through seats, wearing of packing, and corrosion. Because it is considerably challenging to detect valve malfunctioning until the operator identifies a significant fault, failure of the gate valve may lead to a severe accident event associated with water distribution systems. In this study, we proposed a methodology to diagnose the faults of gate valves. To measure the pressure difference across a gate valve, two pressure transducers were installed before and after the gate valve in a pilot-scaled water distribution system. The obtained time-series pressure difference data were analyzed using a machine learning algorithm to diagnose faults. The validation of whether the flow rate of the pipeline can be predicted based on the pressure difference between the upstream and downstream sides of the valve was also performed.

Recently, in relation to climate change, many studies have been conducted to predict the potential habitat area and distribution range of tilapia and the suitability of habitat for each species. Most tilapia are tropical fish that cannot survive at water temperatures below 10 to 12°C, although some tilapia can survive at 6 to 8°C. This study predicted habitable areas and the possibility of spreading of habitat ranges of tilapia (Oreochromis niloticus and Oreochromis aureus) known to inhabit domestic streams. Due to climate change, it was found that habitats in the Geum River, Mangyeong River, Dongjin River, Seomjin River, Taehwa River, Hyeongsan River, and the flowing in East Sea were possible by 2050. In addition, it was confirmed that tilapia could inhabit the preferred lentic ecosystem such as Tamjin Lake, Naju Lake, Juam Lake, Sangsa Lake, Jinyang Lake, Junam Reservoir, and Hoedong Reservoir. In particular, in the case of tilapia, which lives in tributaries of the Geumho River, Dalseo Stream, and the Nakdong River, its range of habitat is expected to expand to the middle and lower of the Nakdong River system. Therefore, it is judged that it is necessary to prepare physical and institutional management measures to prevent the spread of the local population where tilapia currently inhabits and to prevent introduction to new habitats.

Since last year, the government has enforced the 'Act on the Punishment of Severe Accidents, Etc.' (hereafter referred to as the 'Serious Accident Punishment Act'), which punishes business owners and business managers who fail to fulfill their duty of safety measures with 'imprisonment of one year or more' and the Occupational Safety and Health Act. Based on this, various occupational safety and health policies were developed, including the operation of a system related to entrusting the work of safety managers. Despite these efforts, the effect of implementing the Severe Accident Punishment Act is a groundbreaking change in the current disaster prevention policy, which has increased by 0.02%P and 0.03‱P, respectively, from the previous year to 0.65% of the total accident rate and 1.10‱ of the death rate per 10,000 people as of 2022. As the need emerged, attention was paid to 'collaboration and governance with safety management institutions' in the 'Severe Disaster Reduction Roadmap' announced by the Ministry of Employment and Labor in November 2022. In this study, a meaningful result was derived by comparing and analyzing the industrial accident status of workplaces entrusted by “A” safety management institutions with the national average based on the industrial accident survey table, and the types of industrial accidents that occurred in consigned workplaces were selected as intensive management targets. The policy direction for industrial accident prevention was established. It is necessary to develop safety management work manuals based on the results of this study, expertise, discover best cases of risk assessment and develop guides, and educate and train consigned workers. In addition, it suggests that the government's guidance and supervision are needed to advance the professionalism of safety management entrusted tasks, and that safety management institutions should strengthen their roles and functions for preventing and reducing industrial accidents. However, due to difficulties in disclosing information of specialized safety management institutions, the limitation of the provision, collection, and viewing of research-related data to “A” specialized safety management institutions remains a limitation of the research. It seems likely that more thorough research will be conducted.

The oyster mushroom is a widely cultivated edible mushroom in Korea. It is a regionally specialized crop in Gyeonggi-do, where 68% of the national production is produced. The present study was conducted to develop a new, highquality cultivar with stable cultivation. ‘Manseon’ is a new variety of oyster mushroom suitable for bottle culture. It was produced by mating monokaryons isolated from ‘HB-18’ and ‘P15159-16’. The optimal temperature for ‘Manseon’ mycelial growth was 26–29 °C on potato dextrose agar (PDA) medium and for primordia formation and the growth of fruit bodies the optimal temperature was 18–19 °C on sawdust medium. Spawn running required 30 d, primordia formation required 4 d, and fruit body growth in the bottle culture required 4 d. Regarding the characteristics of the fruit bodies, the pilei were round and dark grayish brown, stipe color was white, and stipe shape was short and thick. The yield per bottle was 192.7 g/1,100 cc, which was 9% higher than that of the control strain (Suhan-1ho). The physical properties of springiness, cohesiveness, gumminess, and brittleness of stipe tissue were 87.9%, 77.4%, 445.1 kgf, and 389.6 kgf, respectively.

A new dark brown variety of Flammulina velutipes, referred to as ‘Asakchoco’, was bred by crossing two monokaryons isolated from the ‘Yeoreumhyang2ho’ and ‘Guemhyang2ho’ varieties. The pileus color of the new variety is dark brown and the stipe color is ivory, with uniformity from the upper section to the base. In addition, the primordia formation is uniform compared to that of the control, and the advantage of this is that the pileus does not become deformed after the primordia formation. During bottle cultivation, the period necessary for mycelial growth was 40 d, for primordia formation was 8 d, and for fruiting body growth was 16 d. The total cultivation period was 64 d, which was 2 d shorter than that of the control. The pileus was smaller and thicker and the stipe diameter was the same, but the stipe length was longer than that of the control. The number of valid stipes per bottle was 441, 24% higher than that of the control (357), and the yield was 197 g, 19% higher than that of the control (166 g).

본 연구는 국내 산림생명자원 중 광나무의 대량생산을 위한 기초연구로, Priming 처리에 따른 발아 효율성 및 유묘 생육특성에 미치는 영향을 구명하고자 수행하였다. 종자 Priming처리는 대조구, GA3 (10, 100, 200 ㎎·L-1), Ca (NO3)2 (50, 100, 200 mM), KNO3 (50, 100, 200 mM)를 24시간 처리하여 발아특성을 분석하였고, 순화재배에 따른 생육특성 및 활착률을 조사하여 수확량을 비교·분석하였다. 발아특성은 25℃·KNO3 100 mM에서 발아율이 유의적으로(p<0.001) 높았으며, 평균발아일수는 10.3~18.1일로 15℃에서 대체적으로 빠른 발아일수를 나타냈다(p<0.001). 발아속도 및 발아균일지수 또한 25℃·KNO3 100 mM에서 유의적으로 높은 값을 보였다(p<0.001). 생육특성의 경우 2 5℃·KNO3 100 mM 처리에서 유근 길이(5.1±2.4 ㎝), 초장(5.7±0.7 ㎝), 근장(16.6±2.0 ㎝), 건중량(0.079 g)이 유의적으로 가장 높게 나타났다 (p<0.001). 유묘활력지수 또한 25℃·KNO3 100 mM 처리에서 1418.3으로 높았으며, 가장 높은 수확량(16.8 g/㎡)을 나타냈다. 결과적으로 25℃, KNO3 100 mM 처리 시 실내발아에서 발아효율성을 높일 수 있었으며, 순화재배 시 우수한 유묘 생육을 보여 수확량을 증진시킬 수 있었다.