Many Korean domestic masonry structures constructed since 1970 have been found to be vulnerable to earthquakes because they lack efficient lateral force resistance. Many studies have shown that the brick and mortar suddenly experience brittle fracture and out-of-plane collapse when they reach the inelastic range. This study evaluated the seismic retrofitting of non-reinforced masonry with Hybrid Super Coating (HSC) and Cast, manufactured using glass fiber. Four types of specimen original specimen (BR-OR), one layered HSC (BR-HS-O), two-layered HSC (BR-HS-B), one layered HSC, and Cast (BR-CT-HS-O) were constructed and analyzed using compression, flexural tensile, diagonal compression, and triplet tests. The specimen responses were presented and discussed in load-displacement curves, maximum strength, and crack propagation. The compressive strength of the retrofit specimens slightly increased, while the flexural tensile strength of the retrofit specimens increased significantly. In addition, the HSC and Cast also produced a considerable increase in the ductile response of specimens before failure. Diagonal compression test results showed that HSC delayed brittle cracks between the mortar and bricks and resulted in larger displacement before failure than the original brick. The triplet test results confirmed that the bonding strength of the retrofit specimens also increased. The application of HSC and Cast was found to restrain the occurrence of brittle failure effectively and delayed the collapse of masonry wall structures.

Due to stricter environmental regulations of the International Maritime Organization (IMO), the number of ships fueled by Liquefied Natural Gas (LNG) is rapidly increasing. The International Code of the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk (IGC Code) limits the material of tanks that can store cryogenic substances such as LNG. Among the materials listed in the IGC Code, ASTM A553M-17 has been recently adopted as a material for LNG fuel tank projects because of its excellent mechanical properties at cryogenic temperatures. In shipyards, this material is being used to build tanks through Flux Cored Arc Welding (FCAW). However, there is a problem that magnetization occurs during welding and there is a big difference in welding quality depending on the welding position. In order to overcome this problem, this study intends to conduct basic research to apply laser welding to ASTM A553M-17 material. As a result of analyzing the bead shape according to laser BOP speed and Energy density performed in this study, it was confirmed that the penetration and energy density are proportional but the penetration and BOP speed are inverse proportional to some extent. In addition, a range of suitable welding speed and energy density were proposed for the 6.1mm thickness material performed in this study.

Due to stricter environmental regulations of the International Maritime Organization (IMO), the number of ships fueled by Liquefied Natural Gas (LNG) is rapidly increasing. The International Code of the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk (IGC Code) limits the material of tanks that can store cryogenic substances such as LNG. Among the materials listed in the IGC Code, ASTM A553M-17 has been recently adopted as a material for LNG fuel tank projects because of its excellent mechanical properties at cryogenic temperatures. In shipyards, this material is being used to build tanks through Flux Cored Arc Welding (FCAW). However, there is a problem that magnetization occurs during welding and there is a big difference in welding quality depending on the welding position. In order to overcome this problem, this study intends to conduct basic research to apply laser welding to ASTM A553M-17 material. In Part I, the bead shape according to the welding output was analyzed and in PART II, ​​the penetration phenomenon according to the welding speed was analyzed after Bead on Plate (BOP) test. As a result of analyzing the bead shape according to laser power performed in this study, it was confirmed that the laser power and penetration depth are proportional to some extent. In addition, a range of suitable welding power was proposed for the 6.1mm thickness material performed in this study.

이 논문에서는 박스형 전력구의 지진응답해석에 사용되는 응답변위법(Response Displacement Method, RDM)의 보수성을 평가하였다. 이를 위하여 25가지 전력구 단면과 각 전력구에 대한 2개의 지반조건을 고려한 총 50개 예제를 선정하였다. 응답변위법에 의한 해석은 다음과 같은 세 가지 방법을 적용하였다: (1) 단일코사인방법, (2) 이중코사인방법, (3) 부지응답해석법. 그리고 이들 응답변위 법의 보수성을 평가하기 위하여 지반-구조물 상호작용을 고려한 동적해석법으로 구한 응답과 비교하였다. 비교결과, 설계지진력을 결정하는 방법 중에서 부지응답해석법이 가장 변동폭이 작았으며, 이중코사인방법이 가장 보수적인 결과를 보였다. 마지막으로 이중 코사인방법을 적용할 때, 응답변위법에 의한 부재력이 동적해석에 의한 값보다 클 확률이 80% 이상이 되기 위한 지반강성 보정계수 C값으로 기능수행수준에서 0.9, 붕괴방지수준에서 0.7을 추천하였다.

본 논문에서는 정전기 흡착패드를 구성하는 곡면형 전극의 기하학적 엄밀성을 고려하기 위해 정전기 문제에 대하여 CAD에서 사 용하는 NURBS 기저함수를 직접 사용하는 아이소-지오메트릭 해석 기법을 도입하였다. 정전기 흡착력을 곡선 접촉면에서 구하는데 법선 벡터의 영향이 크므로 엄밀한 기하형상을 고려하는 아이소-지오메트릭 해석이 강점을 갖는다. 수치 예제를 통해 곡면과 평면에서 반복 구조의 유무에 따른 파라메터 연구를 수행하여 곡면형 전극의 흡착력이 좋은 성능을 가짐을 보였다. 정전기 흡착력의 성분을 분석하였을 때 정전기 흡착력의 차이는 법선 성분 전기장의 증가로 인한 것으로 파악되었다. 결론적으로 곡면형 전극에서도 전극 사이 거리가 가까워지는 아래로 볼록인 경우가 가장 성능이 좋고, 위로 볼록인 경우에는 성능이 가장 낮음을 보였다.

분자동역학에서의 원자들의 유도전하를 계산하기 위해서는 유도전하를 미지수로 하는 선형방정식을 풀어야 하는데 원자들의 위치가 변화할 때마다 필요한 계산이므로 상당한 계산비용이 요구된다. 따라서 효율적인 유도전하 계산 방법은 다양한 시스템을 해석 하기 위해서 필수적이다. 본 연구에서는 constraints가 존재하는 Lagrange 방정식의 해에 대한 선형 시스템, 즉 saddle point를 가지는 문제를 해결하기 위해서 Uzawa method를 도입하였다. Uzawa 매개변수가 수렴 속도에 영향을 미치는 단점을 극복하고 행렬 연산의 효율성을 위해서 Schur complement와 preconditioned conjugate gradient (PCG) 방법을 통해 계산의 효율성을 극대화하는 가속 Uzawa algorithm을 적용한다. 두 금속 나노입자가 전기장에 놓여진 분자동역학 수치모델을 통해서 제시된 방법이 유도전하계산의 수렴성, 효율성 측면에서 모두 향상된 결과를 도출함을 확인하였다. 특히 기존의 가우스 소거법에 의한 계산보다 약 1/10으로 계산비용이 절 감되었고, 기본 Uzawa method에 비하여 conjugate gradient (CG)의 높은 수렴성이 입증되었다.

본 연구는 가정 폭력 청소년의 모래상자치료 사례이다. 본 연구의 대상은 여중생으로 모래상자치료를 활용한 단일 사례이다. 본 연구의 사례는 총 30회기로 2020년 8월 13일 ~ 2021년 5월 10일까지 총 30회기를 주 1회 50분간 실시하였다. 초기 연구참여자는 정서적 불안정감과 우울감이 높았으며 아빠에 대한 분노감과 불신감이 팽배되어 인연을 끊고 싶을 정도로 분노가 내재되어 있었다. 또한 학교생활에서 선생님과의 갈등이 심해 자존감이 낮고 학업 성취도에서도 뒤처지는 양상을 보였다. 그러나 꾸준한 모래상자치료로 어둠 안에 서 갇혀만 지냈던 폐쇄성의 틀을 깨고 차츰차츰 밝고, 명랑한 성격으로 바뀌었다. 또한 왜곡된 인지에서 오는 부정적이었던 생각들보다는 적극적이고 긍정적인 사고의 전환으로 갈등 완화가 이루어졌다. 후반에는 자신의 진로에 대한 결정과 학업에 대한 열정이 높아 컴퓨터에 관련된 다양한 자격증을 취득하여 성취감을 얻게 되었다. 결론적으로 과거 가졌던 우울감과 불안감이 감소 되었으며 정서적 안정감이 향상되어 대인관계에도 원만함을 볼 수 있었다.

본 연구에서는 Aramid FRP와 모서리보강재로 구속한 엔지니어링플라스틱 보강을 통해 기둥의 횡구속 능력을 증대하여 콘크리트 피복 및 압괴 파괴를 지연시킴으로써 휨 항복 후 연성거동을 유도하여 기존 저층 필로티 건축물의 내진 성능을 확보하는 방법을 제시하고 저층 필로티 건축물의 내진취약요인을 분석하여 필요한 전단보강량을 산정, 제안공법의 목표전단보강을 설정하는 것을 목적으로 한다. 엔지니어링플라스틱을 활용한 기둥의 전단보강형상을 제안하고 필로티 구조의 내진취약요인 보강임계점 예측과 예제모델의 구조해석을 통해 제안공법의 목표전단보강량을 검증하였다. 구조해석 결과, 특별지진하중 적용 시, 휨-축력 내력 초과비율이 타 유형군에 비해 낮은 ST-A1(1축편심)을 기준으로 연면적 750m² 이하와 1축 편심 중심-강심편심율 18%이하에 해당될 경우에는 본 논문에서 제안하는 ‘고성능 복합섬유 패널 전단 보강법’을 적용할 수 있는 경계로 제한하고자 한다.

Because of the International Maritime Organization(IMO)'s regulation to regulate emissions of ships, a change is taking place to replace ship fuels from Heavy Fule Oil(HFO) to Liquefied Natural Gas(LNG). In the case of LNG, it is a material obtained by liquefying Natural Gas(NG), and it is -163 degrees below zero, and the volume is reduced to 1/600 level. The material of the tank that can store LNG must be a material that can safely store LNG in a cryogenic environment, and the materials of the tank that can store LNG are limited in the International Code of the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk(IGC Code). Among the materials listed in the IGC Code, 9% nickel steel is used as a material for LNG fuel propulsion tanks that are recently ordered because of relatively high mechanical properties under cryogenic environments. In this study, the mechanical properties of butt welds were measured following the weld reliability evaluation of Flux Cored Arc Welding(FCAW) butt welds made of 9% nickel steel by PARTI. The measured mechanical properties are tensile strength, bending strength, hardness, and cryogenic impact test required by the classification for Welding Procedure Specification(WPS) approval.

Assessment of noise exposed population is to check the environment noise level and social influence in order to reduce the risks such as annoyance and disturbance that are generated by environmental noise. Also, this method suggests the preferential noise abatement policy and action plan by accurately finding the area that the noise causes harmful effect to human health. Recently, a noise map, which can predict noise in comprehensive area, is used for the assessment of noise exposed population, breaking from the methods using existing measures. In particular, countermeasure for noise can be considered more effectively by using assessment methods of noise exposed population for specific noise level, area and building types which are the main input factors in noise maps. In this study, we propose noise prediction at traffic noise due to noise map.

Because of the International Maritime Organization(IMO)'s regulation to regulate emissions of ships, a change is taking place to replace ship fuels from Heavy Fule Oil(HFO) to Liquefied Natural Gas(LNG). In the case of LNG, it is a material obtained by liquefying Natural Gas(NG), and it is -163 degrees below zero, and the volume is reduced to 1/600 level. The material of the tank that can store LNG must be a material that can safely store LNG in a cryogenic environment, and the materials of the tank that can store LNG are limited in the International Code of the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk(IGC Code). Among the materials listed in the IGC Code, 9% nickel steel is used as a material for LNG fuel propulsion tanks that are recently ordered because of relatively high mechanical properties under cryogenic environments. In this study, butt welding was performed on a 9% nickel steel material using Flux Cored Arc Welding(FCAW), the most widely used welding method in shipyards. In PARTI, after securing the welding conditions, cross-sectional observation results analysis, liquid penetrating test, and radiographic test were performed to verify the reliability of the weld.

2020년 3월부터 10월까지 군산시의 중초산 저수지와 북초산 저수지의 어류상 및 군집분석을 하였다. 조사기간 동안 채집된 어류는 중초산 저수지에서 4목 5과 8종 1,895개체, 북초산 저수지에서 3목 5과 7종 171개체였다. 중초산 저수지의 우점종은 참붕어 (661개체, 상대풍부도: 34.7%) 아우점 종은 흰줄납줄개 (660개체, 상대풍부도: 34.7%), 북초산 저수지는 배스 (77개체, 45.0%)와 붕어 (60개체, 35.1%) 순으로 나타났다. 군집분석 결과 중초산 저수지는 우점도 0.697, 다양도 1.483, 균등도 0.713, 종 풍부도 0.928, 북초산 저수지는 우점도 0.801, 다양도 1.304, 균등도 0.670, 종 풍부도 1.167을 보였다. 본 연구 결과를 통해 생태계 교란생물인 배스의 영향으로 토착어종의 개체수와 군집의 다양도가 감소한 것을 확인할 수 있었다. 따라서 외래어종의 지속적인 제거와 유입을 막는 관리가 요구된다.

한국산업규격(KS)에서 오징어젓은 오징어 배합비율이 75% 이상으로 정하고 있다. 본 연구는 저염 젓갈을 제조하기 위한 기초연구로 유산균 첨가에 따른 영향을 실험한 결과이다. 면역활성이 있는 기능성 유산균을 오징어젓 및 어리굴젓에 각각 첨가한 후, 냉장 또는 실온에서 45일간 보존하면서 미생물학적, 관능적 품질을 평가하였다. 오징어젓은 실온에서 보관한 경우, 보존기간이 경과하면서 유산균 수는 대체로 증가하였다. 어리굴젓의 경우에도 유산균 첨가 시료에서 실온에 2주간 노출한 경우, 생균수가 약 100배 증가하였다. 한편, 일반세균의 경우에는 유산균 첨가 및 비첨가 대조구 모두 현저한 변화가 없이 일정수준으로 유지되는 것으로 나타났다. 미생물 학적 변화를 바탕으로 판단할 경우 본 시험에 공시된 오징어젓 및 어리굴젓은 유산균 첨가에 의한 현저한 미생물의 증식이나 감소는 수반되지 않으며, 소비자가 통상적으로 섭취하는 기간동안 유산균의 빠른 증식은 물론, 일반세균의 증식억제효과는 기대하기 어려울 것으로 판단된다. 그러나 저염화와 더불어 관능적 품질 향상이 뚜렷하게 나타났으며, 기호성이 우수한 제품의 개발이 가능하다고 판단된다.

PURPOSES : The exposed aggregate number (EAN) and mean texture depth (MTD) of exposed aggregate concrete pavement (EACP) influence the functional performance of EACP in terms of pavement noise and skid resistance. The selection of the exposure time of EACP is important because the designed EAN and MTD of EACP can be achieved when the exposure process is performed at an appropriate time. On the one hand, too early exposure may cause protrusions and unwanted removal of aggregates and mortar. On the other hand, late exposure may cause difficulty in exposure of the mortar. In this study, a method to determine the optimum exposure time for EACP is suggested using a non-destructive method. METHODS : A set of laboratory tests was performed to investigate the variation in EAN and MTD of EACP according to the elastic modulus obtained by non-destructive equipment. From the results of this investigation, the optimum exposure time using the non-destructive method and the exposure time window (ETW) method was suggested. In addition, the usefulness of ETW suggested by laboratory tests was verified from a field application. RESULTS : From the laboratory tests, it was found that the targets of the surface condition of EACP (EAN: 59 per 25 cm2, MTD: 1.39 mm) can be achieved when the concrete elastic modulus is higher than 20GPa. The proposed guideline using the non-destructive method was applied for the field construction of EACP and achieved similar results. CONCLUSIONS : It was found that the proposed guideline for determining the exposure time window based on non-destructive testing is useful.

A shake table test is conducted for the three-story reinforced concrete building structure using 0.28 g, 0.5 g, 0.75 g, and 1.0 g of seismic input motions based on the Gyeongju earthquake. Computational efforts are made in parallel to explore the mechanical details in the structure. For engineering practice, the elastic modulus of concrete and rebar in the dynamic analysis is reduced to 38% and 50%, respectively, to calibrate the structure's natural frequencies. The engineering approach to the reduced modulus of elasticity is believed to be due to the inability to specify the flexibility of the actual boundary conditions. This aspect may lead to disadvantages of nonlinear dynamic analysis that can distort local stress and strain relationships. The initial elastic modulus can be applied directly without the so-called engineering adjustment with infinite element models with spring and spring-dashpot boundary conditions. This has the advantage of imposing the system flexibility of the structure on the sub-boundary conditions of springs and damping devices to control its sensitivity in a serial arrangement. This can reflect the flexibility of realistic boundary conditions and the effects of system damping (such as the gap between a concrete footing and shake table, loosening of steel anchors, etc.) in scalar quantities. However, these spring and dashpot coefficients can only be coordinated based on experimental results, making it challenging to select the coefficients in-prior to perform an experimental test.

A Catholic school is a school that spreads religious ideology to students by combining religious education with regular school curriculum. But, most Catholic schools do not have a separate liturgical space, mass is performed in multipurpose spaces such as auditoriums, and are exposed to severe acoustic defects due to the very aging facilities and lack of sound performance suitable for the liturgical space. So, in this study, an improvement plan was proposed using sound simulation after identifying acoustic defects through field measurements in the liturgical space of Haeseong High School in Jeonju. Also, hearing experiment using Acoustic Psychological Analysis was conducted to identify changes in subjective responses felt by students as they improved their acoustic performance. The results of study, before and after sound performance improvement sound pressure level (SPL500Hz) was 64.8dB at 66.7dB, the weighted sound level (SPLdB(A)) was 67.9dB(A) at 75.8dB(A), reverberation time (RT500Hz) was 2.04sec at 2.52sec, definition (D50,500Hz) was 40.2% at 33.5%, clarity (C80.500Hz) was –0.8dB at –1.18dB, and RASTI was 57.7% at 49.2% was evaluated. In addition, the amount of improvement in subjective responses before and after sound performance through psycho-acoustic experiment decreased by “Reverberation” -17.0%, “Loudness” -11.3% and increased by “Clear” 21.3%, “Vivid” 21.3%, “Intimacy” 12.4%, “Warmth” 14.3%, “Stability” 19.3%, “Godliness” 18.8%. Therefore, after improving sound performance, Haesung High School's liturgical space improved satisfaction with subjective sound performance felt by students and teachers to ensure sound performance suitable for the liturgical space.

Building Equipment field is getting important recently which satisfies the requirement for pleasant living environment. But, the noise generated in the machinery room often violates the pleasant living environment of residents in complicated form of airborne noise and soild sound, its seriousness is increasing so that damage of noise can take large percentage of environmental complaints. So, soundproofing and insulation of sound which can minimize such noise and effective countermeasure in case of civil appeal are required, but research materials regarding building equipment are definitely insufficient domestically. In this respect, this study used Zwicker parameter which is applied by psychological and acoustic reactions according to sound quality, analyzed sound quality of 32 kinds of building equipment used in machine room, and analyzed correlation between dB(A) and PSIL which are items of Zwicker parameter and noise valuation based on that. As the results, if valuates altogether loudness and unbiased annoyance which have high correlation with other existing suggested valuating methods, it is considered that it can be utilized as basic data for more reasonable and accurate grasping characteristics of noise from building equipment and for building effective countermeasure in case of civil appeal.