With changing dietary trends, active research is underway to substitute rice flour for wheat flour, commonly added to various processed foods. This study aimed to explore whether Baromi2, a floury rice incorporated in the production of Sujebi, can effectively replace wheat flour at appropriate levels based on its physicochemical and cooking characteristics. Baromi2 was categorized based on particle size (100, 140, and 200 mesh) and added in proportions of 10% and 20% relative to the weight of wheat flour. As the amount of Baromi2 increased, the protein and lipid content of the mixed flour also increased. Simultaneously, the dough strength decreased as the noodles became thinner, reducing hardness, gumminess, and chewiness. Additionally, a decrease in particle size increased peak viscosity and breakdown viscosity, whereas setback viscosity decreased. When Baromi2 was added at a 10% ratio, it displayed a low cooking loss, demonstrating desirable characteristics for Sujebi and was considered the most suitable proportion for production. These results provide foundational data for developing various rice-processed products using Baromi2, contributing to expanding consumption and enhancing utility.

This study investigated the quality characteristics and optimal conditions of noodles produced by adding Baromi 2 Garu floury rice to wheat flour. The lightness of samples with floury rice increased, while the lightness (L*), redness (a*), and yellowness (b*) decreased after cooking compared to before cooking. The weight, volume, and moisture absorption rate of cooked noodles decreased compared to wheat, but turbidity increased as the amount of rice flour increased. In addition, compared to the control with 20% rice flour, GR-20 (flour replacement by 20% Garu floury rice) with floury rice had lower turbidity, showing less cooking loss. The hardness, gumminess, and chewiness of noodles with floury rice decreased as the floury rice content increased, while springiness, cohesiveness, and adhesiveness increased. The elongation force and distance decreased as the amount of floury rice increased. Therefore, the optimal amount of floury rice to replace wheat flour would be 20%. Adding excessive amounts of floury rice to processed foods requires additional processes, such as adding food additives or changing the processing method to control physical properties.

This study investigated the nutritional characteristics of before and after fermentation of domestic soybean (Glycine max L.) by Rhizopus oligosporus. The soybean storage proteins, β-conglycinin (11S globulin) and glycinin (7S globulin), were the most abundant in Seonyu (SY) and Danbaegkong (DBK), with concentrations of 253.4 mg/g and 193.0 mg/g, respectively. For 11S/7S related to sulfur-containing amino acid, DBK had a value of 0.95, making it the most excellent nutritionally among all the cultivars. The free amino acid content significantly increased from 0.04~10.45 mg/g before fermentation to 1.37~16.95 mg/g after fermentation, and the essential amino acid composition increased, confirming an improvement in protein quality after fermentation. Phytic acid, known as a nutritional inhibitor of soybeans, decreased from 1.66~2.13 g/100 g before fermentation to 0.90~1.58 g/100 g after fermentation, suggesting that mineral absorption inhibition was alleviated. In addition, the trypsin inhibitor content is suppressed by 76.20% to 81.25% after fermentation, which is expected to improve protein utilization in the body. This study confirmed some properties of fermented products by Rhizopus oligosporus using domestic soybeans, and these results are presented to serve as the basic data for establishing new uses of Korean soybean cultivars.

This paper presents a case study of developing a blended reading program for Korean EFL middle school students using a process drama methodology to generate intrinsic motivation to read, improve reading comprehension and language fluency, and foster twenty-first-century skills such as creativity, communication, and cooperation. For the development of the reading program, a needs analysis was conducted using student questionnaires and diagnostic tests. From results of the needs analysis, sample lessons were designed based on the process drama methodology following its planning principles and strategies. Based on feedback from teachers and students after piloting the sample lessons, the blended reading program was finalized. The proposed blended reading program is expected to help Korean EFL middle school students build a positive attitude toward reading English books and develop reading comprehension, language fluency, and 21st-century core competencies. It will also encourage English teachers to use innovative teaching methods in English education.

In vitro digestibility and protein digestibility corrected amino acid scores (PDCAAS) were investigated to verify the availability of protein in various Rhizopus oligosporus fermented products of domestic soybean (Glycine max L.) cultivars. Danbaegkong (DBK), Daepung (DP), Daewonkong (DWK), Saedanbaek (SDB), Seonyu (SY), and Cheongja4ho (CJ4) were used as raw samples, which were fermented using commercially available Rhizopus oligosporus for 48 h. All cultivars showed increased crude protein content after fermentation. The crude protein content of DBK and SDB was significantly higher than that of the other samples (55.12% in DBK and 54.22% in SDB) (p<0.001). CJ4 had the highest alanine content of 28.88 mg/g (p<0.001), and no significant difference in cysteine content was detected among the cultivars. In most of the fermented samples, the in vitro digestibility was 0.9 or higher, indicating high protein in the fermented samples. However, it is considered that restrictions on digestion are low. In DWK, the amino acid content and PDCAAS, which together indicate protein quality, were 0.917 and 0.855, respectively, confirming that it was the best cultivar to provide the raw material for fermentation. In conclusion Rhizopus oligosporus fermented soybean products can be considered a prospective source of protein with high utility value.

The purpose of this study was to investigate the Maillard reaction–related physicochemical properties of three maize varieties (Kwangpyeongok, Sinhwangok2ho and Gangdaok) after roasting them for different times (0, 15, 25, 40, and 55 minutes). The Maillard reaction is a non-enzymatic browning reaction involving reducing sugars and amino compounds. The content of reducing sugar, the causative agent of the Maillard reaction, decreased as roasting time increased. Gangdaok showed the lowest reducing sugar content of 1.04 mg/g after 55 minutes of roasting. In the elapsed roasting time, chromaticity ‘L’ and ‘b’ values decreased. At 55 minutes of roasting, wherein the Maillard reaction occurred most actively, Gangdaok showed the lowest ‘L’ value of 56.37 and the highest ‘a’ value of 7.60. Gangdaok had superior conditions for inducing the Maillard reaction compared to other varieties, and it is consider that 'flint–type', an endosperm characteristic, may have been the influencing agent. This study detected a total of 52 types of volatile aroma compounds (VACs), of which 28 were produced after roasting. Of the total VACs detected, 2-Formyl-5-methylfuran and 2-Furancarboxaldehyde accounted for 43.8~45.5% and have been confirmed to be the major VACs present in roasted maize. Most of the correlations between the Maillard reaction–related characteristics showed high correlation coefficients.

The effect of 16 cultivars on the quality of the rice porridge was investigated. The ‘Geunnun’ had the highest water absorption rate, but the ‘Segyejinmi’ yield (w/w) was the highest. The total sugar content of the rice porridge was 0.29~8.10%, showing significant variation among the cultivars. High amylose ‘Dodamssal’ and ‘Hwaseonchalbyeo’ glutinous rice displayed rotational viscosities of <20,000 cP. Rotational viscosities for boiled rice cultivars were 30,000~40,000 cP, representing an intermediate level, and the rotational viscosities of ‘Geonyang2’ and ‘Hanareum4’ were over 50,000 cP. These results suggest that the viscosity of rice porridge varies significantly among raw material cultivars. Among other variables affecting the texture profile of rice porridge, there were significant differences in hardness and gumminess among the cultivars. As a raw material, ‘Baekokchal’, a kind of glutinous rice, is known to be whiter than the non-glutinous rice, but after processing to porridge, it showed the lowest L value (71.1). Starch degrading enzyme activity was not significant in most types of rice porridges within 30 or 60 minutes. Therefore, enzymatic starch degradation is thought to be completed within 30 minutes. Among the tested raw materials, ‘Miho’ was 73.5 μg/mg, indicating the best digestibility in vitro.

This study was carried out to investigate milling's effect on the pasting properties and storage stability of dry-milled rice flour. Rice flour's moisture content was increased from 9.48% to 9.80% after going through a rice polisher, and the crude fat content of rice flour was decreased from 0.91% to 0.62% after going through a rice polisher. In the color index of rice flour, the rice polisher was only affected by yellowness. The pasting properties were verified through RVA, and it was confirmed that the use of a rice polisher had no significant effect on the pasting properties. As a result of observing the changes in fatty acid value, it was ascertained that the storage period could be increased using the rice polisher. These results suggest that the rice polisher can increase the storage period without changing the pasting properties.

This study was conducted to compare the quality characteristics of firm tofu (coagulant calcium chloride, CaCl2 used) made from eight imported and four domestic soybeans selling in Korean markets. The 100-seed weight of soybeans imported from China and Seonpung cultivated in Korea was the highest at 33.23 g and 32.51 g, respectively. Soybeans imported from the USA (bulk type) showed the lowest at 16.12 g, followed by Ukraine at 16.94 g, and Brazil at 18.51 g. The range of protein and fat in the 12 soybeans was 37.08~41.36% and 18.35~22.17%, respectively. The isoflavone contents were the highest in Daepung2 cultivated in Korea at 3,764.10 μg/g and the lowest in soybeans imported from Brazil at 1,439.85 μg/g. Tofu yield among the samples was in the following order: Seonpung (235.2%), China (232.0%) Daepung2 (228.7%), Daechan (225.7%), and Brazil (208%). Tofu made with soybeans cultivated in Korea (including from China) showed a higher yield compared to that made from soybeans from seven other countries. In the analysis of the correlation of quality factors of tofu, the hardness of the tofu was correlated with 100-seed weight (r=0.676*) and protein content of the soybeans (r=0.837**). Tofu yield was correlated with 100-seed weight (r=0.748**) and protein content of the soybeans (r=0.583*).

This study was conducted to secure basic information for corn processing by comparing the quality characteristics according to maize cultivars and kernel types (dent, intermediate, flint-like). As a result of analyzing 15 cultivars, a range of measurements were observed: 100-kernel weight, 22.89~35.63 g; moisture, 7.57~8.42%; crude protein, 8.46~11.45%; crude lipids, 3.26~4.83%; Hunter’s L-value, 83.70~86.79; a-value, 2.61~5.49; b-value, 22.01~28.15; and total carotenoids, 6.74~17.07 μg/g. Significance among the cultivars was shown in all quality characteristics (p<0.001), but the significance among the kernel types was found only in crude protein (p<0.005), crude fat (p<0.001), and Hunter’s L-value (p<0.05). The hardness of maize was decreased proportionally to the soaking time for all maize cultivars (p<0.001). In particular, with the same soaking time for different kernel types, the hardness difference was shown in the order of flint-like > dent ≒ intermediate. It was confirmed that the decrease in the hardness of flint-like kernel of close to that of hard-type starch was slowed compare dent and intermediate kernels. So it is expected the some characteristic of kernel types will contribute to the appropriate customized use of the developed cultivars.

The purpose of this study was to derive the conditions for manufacturing rice porridge with optimum properties after reheating. The characteristics of rice porridge according to the soaking time, water addition rate, heating temperature, heating time, and cooling conditions were compared using the ‘Samkwang’ cultivar. In Step Ⅰ, as the heating temperature increased, the weight change decreased and the viscosity increased, and the temperature known as the main factor of the gelatinization also appeared to affect the viscosity increase. In Step Ⅱ, the viscosity and the texture properties was not significantly different as the soaking time was reduced, and 10 minutes was suitable because of due to the shortening effect of the total process time. In Step Ⅲ, the residual heat was lowered by cooling after the rice porridge production, so the viscosity could be greatly reduced. Also, it was confirmed that the water addition rate of 900% and the heating temperature of 15 minutes were optimal manufacturing conditions. The next study will investigate the porridge processability of rice cultivars using these results.

When producing rice products, it is very important to select suitable raw materials. Therefore, in this study, the quality characteristics of 16 rice cultivars were quantified to determine the criteria for evaluating the machinability of raw rice. The L value, which can affect the color of porridge prepared from rice, was the greatest for Hwaseonchalbyeo (84.17). The water-binding capacity, related to water interaction, was high in Hyangcheola (113.2%), and water solubility was high in Shingil (22.3%). Dodamssal (42.3%, 70.7 RVU) and Hwaseonchalbyeo (4.7%, 27.8 RVU) showed lower final viscosity compared to the cultivars in which the amylose content was medium groups (16.4~21.2%, 173.6~277.2 RVU). Specifically, cultivars with high or low amylose content had a low viscosity. The characteristics of the distribution of raw rice quality data were confirmed through 11 histograms. Furthermore, amylose content vs. water solubility, water solubility vs. peak viscosity, and peak viscosity vs. final viscosity showed high correlations (r=0.542, －0.569, and 0.836 respectively, p<0.01), and clear cultivar discrimination by the standard error of the mean (0.765~10.811). In conclusion, amylose content, water solubility, and peak viscosity were considered the most suitable characteristics for the quality evaluation of raw rice.

In this study, the physicochemical traits of soybean (100-seed weight, seed coat rate, protein content, composition, and amino acid content) and the quality of tofu (texture and sensory characteristics) were evaluated in order to determine the features of six varieties (Saedanbaek, Daechan, Daepung2, Seonpung, Miso, Saegeum) in terms of textural and sensory characteristics of tofu. Regardless of cultivar, the order of amino acid composition rate was as follows: Glutamic acid > Aspartic acid > Arginine > Leucine > Lysine. Approximately 50-60% of tofu (dry weight) consisted of protein, and among the cultivars, Tofu made from Saedanbaek showed the highest amount of protein at 59%. It was followed by tofu made from Miso at 54%. The rest contained about 50% protein. According to the result of correlation, crude lipid (-0.933**), crude protein (0.961**), and total phosphorus (0.924**) were strongly correlated with tofu hardness, and such factors could be utilized as an indicator of tofu quality.

This study was conducted to explore the quality characteristics of colored rice depending on the cultivars (Jeogjinu, Josaengheugchal, Joeunheukmi, Heukjinjubyeo, Hongjinju, Heukjinmi, Geongganghongmi) for porridge. The moisture, crude protein, lipid, ash, amylose and damaged starch contents of colored rice ranged from 10.05~11.23%, 7.72~8.69%, 2.68~3.26%, 1.62~1.88%, 6.29~20.31% and 5.06~8.26%, respectively. The highest moisture (11.23%), crude protein (8.69%), lipid (3.26%) and ash (1.88%) contents of colored rice were detected in Heukjinjubyeo, Joeunheukmi, Josaengheugchal and Heukjinmi, respectively. The lowest amylose and damaged starch contents of colored rice were detected in Josaengheugchal and Joeunheukmi, respectively. In general, the water binding capacity, water solubility and swelling power of Heukjinmi were greater than those of the other cultivars. The investigation of the pasting properties (peak, trough, break down, final and setback viscosity, peak time, pasting temperature) of colored rice indicated a low value in Josaengheugchal. The lowest hardness (13,673.25 g) of colored rice was observed in Heukjinjubyeo while the highest digestibility (5.44 glucose mg/g) of colored rice was observed in Josaengheugchal. These results indicated that Josaengheugchal are suitable cultivars for porridge.

In this study, the product characteristics and physicochemical properties were investigated through collection of commercial porridge. The addition rate of grain raw materials was about 6.5~11.75%, glutinous rice was added at a rate of about 23~60% to improve the viscosity and various other food additives were used. The moisture content characteristics varied among the products. The rotational viscosity of CP (Commercial Porridge)4 was the highest at 39,054 cP, while the flow viscosity of CP3 was least at 4.80 cm/30 seconds. The starch content differed among the products in the range of total starch 6.96~8.08%, amylose 1.41~2.61%, total sugar 6.55~12.81% and reducing sugar 0.50~0.99%. Particularly, total sugar showed a very high correlation ( 0.920) while rotational viscosity and color value (b) showed significant correlation with most of the properties i.e. moisture, solids content etc. There was a rapid increase in the reactivity of starch degrading enzyme at the early stage of the reaction which gradually decreased with time. The physicochemical characteristics of commercial porridge presented in this study could be expected to increase the industrial use value of the related research because it considers the quality of the currently commercialized porridge for the future selection of suitable porridge raw materials.

The properties of rice were studied on five rice cultivars (Ilpumbyeo, Samkwang, Goami-4, Dodamssal, and Thai rice), and employed two kinds of saccharification treatment methods (treatment : rice shape, treatment II: grinding rice shape). Thai rice showed differences in width and length when compared to other cultivars of rice, and the Goami 4 had the lowest thousand-grain weight. The Goami4 and Dodamssal each showed high contents of amylose and resistant starch, and the water absorption rate was close to maximum at 90 minutes as well as the highest level of Goami 4 at all times. The qualities of highest water-binding capacity, solubility and swelling power was most significant in Thai rice. The lowest hardness level of wet rice resulted in the lowest hydration-related characteristics. High amylose content rice, in particular, showed low sugar content and slightly increased sugar content as the saccharification process improved (treatment II). On the other hand, high amylose cultivars had the same high degree of hardness as boiled rice. From these results, the Dodamssal was found to have the lowest viscosity at all temperatures but highest viscosity during the saccharification process, suggesting it may be successfully implemented as a thickener in rice beverage processing. The purpose of this study was to attempt to provide basic data on the development of rice beverage manufacturing technology, based upon the quality characteristics related to beverage processing of rice cultivars.

The properties of rice were studied, and 8 rice flour cultivars were used to study the effect of particle size on the physicochemical properties, color value, RVA viscosities, water absorption index (WAI), and water solubility index (WSI) of rice flours. The mean particle size by the 3 particle size classification of 150 mesh, 200 mesh, and 250 mesh was, 90.75 μm, 60.73 μm, 39.94 μm, respectively. Thai rice had the highest amylose content and Samkwang rice had the lowest amylose content. Protein content of rice flours prepared was decreased as the particle size of rice flour decreased. In terms of color values, the L-value and the a-value of rice flour were increased as the particle size of rice flours decreased, while the b-value was decreased as the particle size of rice flours decreased. Using a rapid visco analyzer (RVA), the initial pasting temperature of Thai rice cultivar was found to be the highest; the peak viscosities of Sunpum cultivar and Misomi cultivar, and Samkwang rice were higher than those of other rice flours. The water absorption index and water solubility index were increased as the particle size of rice flour decreased. In order to use processed rice flour for the development of processed foods, proper characteristics of the cultivars and particle size should be considered.

This study aimed to evaluate the fermentation characteristics of mixed Makgeolli with barley and wheats under, fermentation at different temperatures (20, 25, and 30℃) and time (3, 6, and 9 days). The pH and sugar of mixed Makgeolli were 3.68~4.26 and 12.30~17.31 ∘Brix, respectively. The total acidity showed proportionate increase with fermentation temperature and time; whereas, reducing sugar contents decreased with increasing fermentation temperature and time. The alcohol contents of mixed Makgeolli varied significantly by fermentation temperature and time (p<0.05). In terms of color values, the L value decreased with increasing fermentation temperatures, and a value increased significantly with increasing fermentation time. The number of microorganisms (yeast, total bacteria and lactic acid bacteria) in mixed Makgeolli decreased progressively with increasing fermentation temperature and time. Among the organic acids (citric, lactic, malic, and pyruvic acids) in mixed Makgeolli, citric and lactic acid was present at the highest concentrations. From these results, the optimum fermentation conditions of mixed Makgeolli with barley and wheat were 20~25℃ for 6 days.

This study aimed to evaluate the quality characteristics of wheat-Makgeolli (WM), a traditional Korean cereal alcoholic drink, using three varieties of wheat, namely Jokyoung (JK), Baegjoong (BJ) and Keumkang (KK). Samples of WM brewed from 100%, 85% and 70% milling rates of the three Korean wheat cultivars were analyzed for alcohol, pH, coloring degree, total acids, soluble solid, free sugars, and organic acids. As the milling rates in wheat decreased, total sugar content in WM increased while the pH of all samples decreased. The WM exhibited 0.95~1.27% in acidity, 10.2~12.5 °Brix in total sugar, and 14~16% in alcohol content. The most organic acids in WM was lactic acid, ranging in all the samples from 85.3~650.3 mg%. The results showed that BJ under a 70% milling rate had the highest reducing sugar contents and 15.97% in alcohol content. The carbohydrate content increased with the milling rate of wheat. Resulting in a positive correlation between carbohydrate content of wheat and total acids, reducing sugars (p<0.001), and alcohol content (p<0.05) in WM. Total sugar content is positively correlated with alcohol and reducing sugar content (p<0.001). Considering the yield, the milling rates will be adjusted to raw material prices.

This study evaluated the hydration, gelatinization, and saccharification properties of rice processing for beverage development. The properties of rice were studied on 10 rice cultivars (Samkwang, Ilpum, Seolgaeng, Anda, Dasan-1, Goami-4, Danmi, American rice, Chinese rice, and Thai rice) and employing four kinds of pre-treatment methods (dry grain, wet grain, dry flour, and wet flour). The results showed that moisture content of rice was between 11.88~15.26%. Increase in soaking time along with highest water absorption was noted in American rice cultivar (46.81%). The water binding capacity of Thai rice was higher when compared to that of other rice flours. In addition, solubility and swelling power of rice were 4.52~26.65% and 0.19~2.05%, respectively. The amylose content of Goami-4 was higher in rice processing. Using a rapid visco analyzer (RVA), the initial pasting temperature of Danmi cultivar was found to be the highest; the peak viscosities of Anda cultivar and Dasan-1 cultivar, and Chinese rice were higher than of those of other rice flours. After saccharification, the pH, soluble solids content, and reducing sugar content of rice processed through different pre-treatment methods were in the range of 6.22~7.08, 4.67~16.07 °Brix, and 0.35~11.67% (w/w), respectively. In terms of color values, the L-value of dry grain, a-value of wet (grain, flour), and b-value of dry sample (grain, flour) were found to be the highest. Assessment of various factors and cultivars characteristics of the raw grains are of importance in the development of rice beverage.