본 연구에서는 기둥을 관통하는 슬래브 하부 철근이 중력하중만으로 설계된 포스트텐션 플랫플레이트 골조의 내진성능에 미치는 영향을 평가하였다. 중 약진 지역에서 건물은 흔히 중력하중만을 고려하여 설계되고 있다. 본 연구에서는 중력하중으로 설계된 PT 플랫플레이트 골조의 내진성능에 집중되고 있다. 이를 위하여, 3,6,9층 PT 플랫플레이트 골조는 중력하중만으로 설계하였다. 철근콘크리트 플랫플레이트 골조에서는 취성적인 붕괴를 예방하기 위해서는 기둥을 관통하는 연속된 슬래브 하부철근이 위치하여야 한다. 그러나 PT 플랫플레이트 골조에서는 슬래브 하부 철근에 대해 ACI 318-05에서는 특별한 언급이 없기 때문에 흔히 생략하고 있다. 본 연구는 대산건물을 비선형 시간이력해석 으로 골조 모델의 내진성능에 대해 평가한다. 비선형 시간이력해석은 6개의 지진과 2개의 다른 위험수준 (475, 2475년 주기), 3개의 다른 지역 (보스턴, 시애틀, LA)을 사용하였다. 해석모델은 PT슬래브-기둥 접합부의 파괴 메카니즘과 비선형 거동을 살펴보기 위해 개발되었다. 본 연구는 중력하중으로 설계된 PT 플랫플레이트 골조가 몇몇 내진저항 능력을 보여주고 있다. 또한, PT 플랫플레이트 골조의 내진성능은 기둥을 관통하는 슬래브 하부철근이 위치할 때 눈에 띄게 향상되었다.

Chromium nitride (CrN) samples with two different layer structures (multilayer and single layer) were coated on bipolar plates of polymer electrolyte membrane fuel cells (PEMFC) using the reactive sputtering method. The effects with respect to layer structure on corrosion resistance and overall cell performance were investigated. A continuous and thin chromium nitride layer (Cr0.48 N0.52) was formed on the surface of the SUS 316L when the nitrogen flow rate was 10 sccm. The electrochemical stability of the coated layers was examined using the potentiodynamic and potentiostatic methods in the simulated corrosive circumstances of the PEMFC under 80˚C. Interfacial contact resistance (ICR) between the CrN coated sample and the gas diffusion layer was measured by using Wang's method. A single cell performance test was also conducted. The test results showed that CrN coated SUS316L with multilayer structure had excellent corrosion resistance compared to single layer structures and single cell performance results with 25 cm2 in effective area also showed the same tendency. The difference of the electrochemical properties between the single and multilayer samples was attributed to the Cr interlayer layer, which improved the corrosion resistance. Because the coating layer was damaged by pinholes, the Cr layer prevented the penetration of corrosive media into the substrate. Therefore, the CrN with a multilayer structure is an effective coating method to increase the corrosion resistance and to decrease the ICR for metallic bipolar plates in PEMFC.

Dry CVT(Continuously variable transmission) consists of a driving pulley and a driven pulley joined by rubber V-belt. Each pulley consists of a fixed flange and a movable flange. The movable flange of the driving pulley has the centrifugal roller and a ramp plate in the flange. The movable flange moves toward a fixed flange under the actuation of a centrifugal roller, as the driving pulley speed increases. The main advantages of the Dry CVT with V-belt, which has been popular in Asia, are a simple mechanism, less maintenance and low cost. The important claim which has an influence on the performance of the Dry CVT is the wear of the centrifugal roller. In this study proposed an improved design of ramp plate reducing the wear of the centrifugal roller in order to provide some design guidelines.

This study is focused on the modeling of two phase fluid flow system in the electrode of hydrogen gas generator. The characteristics of hydrogen gas generation was studied in view of efficiency of hydrogen gas generation rate and a tendency of gas flow through the riv of electrode. Since the flow rate of generated gas is the most crucial in determining the efficiency of hydrogen gas generator, we adopted the commercial analytical program of COMSOL MultiphysicsTM to calculate the theoretical flow rate of hydrogen gas from the outlet of gas generator.

Indoor Lighting can be improved by using a refractive lens. This lens is a flat-plate, and patterns are engraved on its surface. The engraved patterns are designed to refract sun's rays. In this study, two patterns have been suggested. The one is designed to refract sun's rays in one direction. The another is designed to refract sun's rays in 4 directions. The designed patterns were machined with a diamond tool and engraved on an experimental Poly Methyl Meta Acrylate flat-plate. Optical experiments have been done by using a laser rays and natural sun's rays. The results showed that sun's rays refracted in one or 4 directions effectively. The refracted rays also improved indoor lighting.

This study investigates the paste mixing of positive active materials which, affect the life cycle of batteries in Pb-Ca-Sn grids, and generation of 4BS in a curing process and considers the effects of these things on the initial charge characteristics and life cycle. In the results of the experiments applied in this study, it was possible to reduce the curing time in which the fine 4BS was formed by the mixing of the positive active materials of lead acid battery applied at high temperature compared to that of the existing coarse 4BS and that represented some improvements in the life cycle performance.

The present study was undertaken to evaluate the effect of temperature on the results of Charpy impact test for glass fiber reinforced polyurethane(GF/PUR) composites. The Charpy impact test were conducted in the temperature range from -50˚ to 50˚. The impact fracture toughness of GF/PUR composites was considerably affected by temperature and it was shown that the maximum value was appeared at room temperature. It is believed that sensitivity of notch on impact fracture energy were increased with decrease in temperature of specimen. As the GF/PUR composites exposed in low temperature, impact fracture toughness of composites decreased gradually owing to the decrease of interface bonding strength caused by difference of thermal expansion coefficient between the glass fiber/polyurethane resin. And decrease of interface bonding strength of composites with decrease in specimen temperature was ascertained by SEM photographs of Charpy impact fracture surface.

Efforts to reduce noise in industrial application fields, such as automobiles, aircrafts, and plants have been gaining considerable attention while a sound proof wall to protect people from the noise has been intensively investigated by many researchers. In this study, our research group suggested creating a new sound proof wall composed of scrap aluminum chips and perforated plates in a commercial polyester sound proof wall, which was then successfully fabricated. This wall's sound absorption characteristics were measured by an impedance tube method. The sound absorption property was evaluated by measuring the Noise Reduction Coefficient (NRC) to the standard, ASTM C 423-90a. The noise reduction coefficient of the sound proof wall composed of 3.5 vol.% and 7.5 vol.% of scrap aluminum chips relatively increased to 5% and 8% compared to the commercial polyester sound proof wall. The scrap aluminum perforated plate also relatively increased to 13% compared to the commercial polyester sound proof wall.

A study of fracture to material is getting interest in nuclear and aerospace industry as a viewpoint of safety. Acoustic emission (AE) is a non-destructive testing and new technology to evaluate safety on structures. In previous research continuously, all tensile tests on the pre-defected coupons were performed using the universal testing machine, which machine crosshead was move at a constant speed of 5mm/min. This study is to evaluate an AE source characterization of SM45C steel by using k-nearest neighbor classifier, k-NNC. For this, we used K-means clustering as an unsupervised learning method for obtained multi -variate AE main data sets, and we applied k-NNC as a supervised learning pattern recognition algorithm for obtained multi-variate AE working data sets. As a result, the criteria of Wilk's λ, D&B(Rij) & Tou are discussed.

A new plate heat exchanger for water-refrigeration systems such as chillers has been developed. Before forming, two stainless steel plates are placed on each other and connected by tig welding. To outline of the plate did the seam welding, in order to form the flow pass on the plate inside the spot welding used. After the plates have been welded, the plates are hydraulically inflated using pressure by water or nitrogen.The plate is made of an SUS plate of 1m×2m in length and 1.2mm in thickness and are fixed in the top of the water tank.As a result of these, it is concluded that the plate exhibits good cooling performance and the average cooling capacity is approximately 2.9RT/plate and the average coefficient of performance (COP) of chiller system is 3.16.

본 연구의 목적은 판의 경계에 대한 그리기와 면담의 결과를 바탕으로 정신모형의 유형별 분석 준거를 도출하고 이를 근거로 고등학생들의 정신모형을 밝히는데 있다. 이를 위하여 고등학교 2학년 학생을 대상으로 충돌형, 섭입형, 발산형 판의 경계에 대한 그리기 과제와 개별 면담을 병행하여 실시하고 그 결과를 정성적으로 분석하였다. 본 연구의 결과, 판의 경계에 대한 고등학생들의 정신모형의 유형은 소박한 모형(naive model), 불안정 모형(unstable model), 인과적 모형(causal model), 개념적 모형(conceptual model)의 4가지로 분류되었다. 이러한 정신모형에 대한 분석 준거는 판과 맨틀을 구분하는지, 판과 하부 맨틀의 이동을 파악하는지, 판의 경계 지형의 특징을 인식하는지, 맨틀의 대류와 지형의 특징을 관련짓고 있는지 등의 요인이다. 판의 경계에 대한 '소박한 모형'과 '불안정 모형'을 지닌 학생들은 맨틀의 대류와 지형의 생성원인을 관련짓지 못한 반면, '인과적 모형'과 개념적 모형'을 지닌 학생들은 판의 경계에서 맨틀 대류와 지형의 생성과의 인과 관계를 인식하고 있었다. 정신모형 유형에 따라 꼭꼭 획득의 방법에 관한 학생들의 믿음을 조사한 결과, 소박한 모형과 불안정 모형을 지닌 학생들은 외부적인 권위에 의존하는 경향을 나타내었다.

Silicon carbide (SiC) is a promising material for power device applications due to its wide band gap(3.26 eV for 4H-SiC), high critical electric field and excellent thermal conductivity. The Schottky barrier diodeis the representative high-power device that is currently available commercially. A field plate edge-terminated4H-SiC was fabricated using a lift-off process for opening the Schottky contacts. In this case, Ni/Ti dual-metalcontacts were unintentionally formed at the edge of the Schottky contacts and resulted in the degradation ofthe electrical properties of the diodes. The breakdown voltage and Schottky barrier height (SBH, ΦB) was 107V and 0.67eV, respectively. To form homogeneous single-metal Ni/4H-SiC Schottky contacts, a deposition andetching method was employed, and the electrical properties of the diodes were improved. The modified SBDsshowed enhanced electrical properties, as witnessed by a breakdown voltage of 635V, a Schottky barrier heightof ΦB=1.48eV, an ideality factor of n=1.04 (close to one), a forward voltage drop of VF=1.6V, a specific onresistance of Ron=2.1mΩ-cm2 and a power loss of PL=79.6Wcm-2.

본 연구에서는 플레이트거더단면의 정적공기력특성에 미치는 단면형상의 영향을 파악하기 위하여 변장비 B/ D=2.5~15범위에서 6종류의 기본단면을 채택하고 주거더의 수와 브래킷 길이를 변화시킨 총 36개 단면에 대하여 영각 -8o~ +8o 범위에서 풍동실험을 통하여 정적공기력을 측정하였다. 그 결과를 요약하면, 전연박리류의 재부착여부에 따라 정적공기력계수는 확연한 차이를 나타냈으며, 브래킷부의 유무에 따라서도 공기력계수의 변화특성이 달라졌으며, 거 더수의 변화는 공기력계수의 변화에 크게 영향을 미치지 않았다. 또, 영각 -5o ~ +5o 범위에서 최대 항력계수는 변장비가 8이상에서는 현행 기준의 항력계수보다 월등히 크게 나타났으며, 양력계수는 최대값이 CL=1, 최소값은 -0.7 정도였고, 모멘트계수의 최대값은 0.1, 최소값은 -0.18이였다. 이를 근거로 항력계수 및 양력계수에 대한 제안식을 도출하였다. 변장비에 따른 양력계수의 기울기 dCL/dα는 변장비 7.5까지는 증가하다가 그 이상이 되면 일정한 값을 가지고 브래킷의 길이가 길어질수록 작아지는 경향을 나타냈으며, 모멘트계수의 기울기는 변장비 5까지는 증가하다가 그 이후부터는 감소하는 패턴을 가지고 있었다.

본 논문에서는 거더교 형식을 갖는 교량구조물의 격자 유한요소모델에 대한 모델개선을 위해 하이브리드 유전자 알고리즘에 기초한 유한요소 모델개선기법을 제안하였다. 하이브리드 유전자 알고리즘은 유전자 알고리즘과 심플렉스 최적화방법에 기초한 직접탐색기법으로 구성하였다. 제안된 기법에 적용할 수 있도록 고유진동수, 모드형상 및 정적 처짐에 대한 계측값과 유한요소해석 결과를 사용한 적합함수를 제시하고, 강성과 질량을 동시에 개선할 수 있도록 이들 세 가지 적합함수의 선형 조합 형태를 갖는 다중목적함수를 제시하였다. 제안된 방법은 2경간 연속 격자 유한요소모델의 수치예제와 단경간 플레이트 거더교에 대하여 검증하였다. 수치예제의 경우, 랜덤 노이즈를 고려한 계측오차의 영향을 수치해석적으로 평가하였다. 수치해석과 실험적 검증을 통해, 제안된 방법이 거더교 형식의 교량에 대한 유한요소 모델개선에 적합하고 효과적임을 검증하였다.

In this study, positive plates of lead acid battery of Pb-Ca alloy and Pb-Ca-Sn alloy were fabricated and the mechanical characteristics of positive plates were measured. This study observed how the changes of content of Ca & Sn affect interface corrosion which is located in between grid & active materials and lead acid batteries as well. The mechanical characteristics of grid alloy is better when Ca is 0.05 wt.% then 0.1 wt.%. This study said that the corrosion rate between the active material based on the charge/discharge cycle of lead acid battery and grid interface is much faster than a grid which contains Sn. And furthermore, according to the study the rate 30 of Sn/Ca which is added to grid shows the best performance.

The acrylic coating emulsions were prepared by the emulsion polymerization to protect the surface of steel plate from the corrosion chemicals like acid, base and salt water. MMA(methyl methacrylate), styrene, BA(butyl acrylate), and 2-HEMA(2-hydroxyethyl methacrylate) were used as monomer. KPS(potassium persulfate) and SBS(sodium bisulfite) as redox initiator and SDBS(sodium dodecylbenzene sulfonate) as emulsifier were used on the emulsion polymerization reaction. The most stable in-situ coating was obtained when 10% of MMA was added. Both particle size and quantity in emulsion were decreased as increasing the mount of SDBS. the most stable prepared coating emulsion with polyisocyanate crosslinker showed very high anticorrosion properties on the coated steel layer to salt water, whereas no significant improvement of anticorrosion property to acdic and basic condition it showed.

본 연구에서는 판 두께와 볼트 크기에 따른 고장력 볼트 마찰이음부의 극한 거동을 비선형 유한 요소 해석 및 실험을 통하여 분석하였다. 볼트의 크기 및 모재의 두께가 고장력 볼트 마찰이음부에 끼치는 영향을 미끄러짐 하중, 볼트의 변형 및 파괴하중과의 관계와 함께 파악하였다. M20, M22, M24의 세가지 볼트와 모재의 두께가 12mm, 16mm, 20mm, 30mm, 40mm인 경우에 대하여 압축력을 받는 고장력 볼트 이음부의 극한 거동을 고찰하였다. 이음부의 힘-변위 관계 및 외력-변형도 관계를 실험적으로 도출하였으며 범용 유한요소해석 프로그램인 ABAQYS를 사용한 수치해석 결과와 비교, 분석하였다.

본 논문에서는 중 약진 지역에서 중력 저항시스템인 중간 모멘트골조로 설계된 3층, 6층 RE 플랫플레이트 구조물을 KBC 2005를 만족하도록 RC구조물에 강판과 가새/ BRB 등의 보강방법을 적용하여 보강하고, 내진성능을 평가하여 보강 효과를 검증하였다. 비탄성 정적해석과 동적해석 결과에 따르면 내진 보강된 구조물은 강도와 강성이 크게 향상된 것으로 나타났다 특히 기둥을 철판으로 보강한 경우 슬래브를 철판으로 보강하여 조기 뚫림 전단파괴를 방지함으로써 강도를 크게 향상할 수 있다. BRB로 보강된 구조물은 Brace로 보강된 구조물보다 다소 연성적 거동을 보였으며, 그 효과는 3층 모델에서 현저하게 나타났다.

An experimental study was performed to investigate the cyclic behavior of steel plate walls with reinforced concrete frames. Three specimens of three-story steel plate walls with reinforced concrete frames were tested. The parameters for the test specimens were the reinforcement ratio of the column and coupling wall. A reinforced concrete infilled wall and a reinforced concrete frame were also tested for comparison. The steel plate walls with reinforced concrete frames exhibited much better ductility and energy dissipation capacity than the reinforced concrete infilled wall and the reinforced concrete frame. The results showed that unlike other structural systems, the steel plate wall with reinforced concrete frames has excellent deformation capacity as well as strength, and can therefore be used as an effective earthquake-resisting system. This result indicates that not only steel frames but also reinforced concrete frames can be used in the steel plate wall system.