This paper presents a new approach for analyzing the microstructure of -reinforced aluminum matrix composites from digital images. Various samples of aluminum matrix composite were fabricated by hot pressing the powder mixtures with certain volume and size combinations of pure Al and SiC particles. Microstructures of the samples were analyzed by computer-based image processing methods. Since the conventional methods are not suitable for separating phases of such complex microstructures, some new algorithms have been developed for the improved recognition and characterization of the particles in the metal matrix composites.

Particulate reinforced titanium composites were produced by PM rout. Differents volumetric percentages of TiN reinforcements were used, 5,10,15 vol%. Samples were uniaxial pressed and vacuum sintered at differents temperatures between . Density, porosity, shrinkage, mechanical properties and microstructure were studied. Elastic properties and strength resistance were analysed by flexural strength and tension tests, and after the test, fractured samples were analysed too, obtaining a correlation between the fracture, interparticulated or intraparticulated, and the reinforcement addition.. Hardness and microhardness test were applied too, in order to complete the study about mechanical properties. In order to study wear resistance pin-on-disc test were used. In addition, the temperature influence, the reactivity between matrix and reinforcement, and the microstructures developed were observed by optical and electron microscopy.

In this study, bottom-up type powder processing and top-down type SPD (severe plastic deformation) approaches were combined in order to achieve full density of Carbon nanotube (CNT)/metal matrix composites with superior mechanical properties by improved particle bonding and least grain growth, which were considered as a bottle neck of the bottom-up method using the conventional powder metallurgy of compaction and sintering. ECAP (equal channel angular pressing), the most promising method in SPD, was used for the CNT/Cu powder consolidation. The powder ECAP processing with 1, 2, 4 and 8 route C passes was conducted at room temperature.

Warm compaction powder metallurgy was used to produce a Ti3SiC2 particulate reinforced Cu matrix composite. Fabrication parameters and warm compaction behaviors of Cu powder were studied. Based on the optimized fabrication parameters a Cu-based electrical contact material was prepared. Results showed that in expend of some electrical conductivity, addition of Ti3SiC2 particulate increased the hardness, wear resistivity and anti-friction ability of the sintered Cu-base material.

It has been reported that light-emitting diodes(LED) can be used in the treatment of oral diseases. Although bio-stimulatory effects of LED irradiation such as promotion of wound healing have been well known, there are few reports about molecular mechanisms associated with wound healing by LED irradiation. The purpose of the present study was to investigate the expression pattern of various extracellular matrix(ECM) molecules in relation to wound healing after LED irradiation on primary human gingival fibroblasts(hGFs) in vitro. The source of light for irradiation was a continuous-wave LED emitting at a wavelength of 635 nm, and manufactured that energy density was 5 mW/cm2 on sample surfaces. The hGFs were irradiated for 1 hour at 37℃ in 5% CO2 humidified chamber. Experimental samples were acquired at 0 (right after irradiation), 24 and 48 hour after irradiation. To investigate the molecular mechanisms associated with wound healing, we examined the mRNA expression of 6 types of collagens, 7 types of matrix metalloproteinases(MMPs) and 4 types of tissue inhibition of metalloproteinases(TIMPs) after LED irradiation by RT-PCR. The mRNA expression of collagen 4, MMP-3, 9, and 16, and TIMP-3 was influenced by LED irradiation. Generally, the collagen expression of the irradiation group was slightly increased, particularly collagen 4 was significantly increased at 0 hour. The expression of MMP-3 was increased at 0 and 24 hours and MMP-16 was increased at 24 hours, respectively. The expression of MMP-9 was decreased at 0 hour and increased at 24 and 48 hours. The mRNA expression of TIMP-3 was significantly decreased at 24 and 48 hours after irradiation. These results suggest that the altered expression of ECM molecules after LED irradiation may contribute to the accelerated wound healing.

Growth behavior and kinetics of grains in a liquid matrix has been studied by computer simulation for various physical and processing conditions. The kinetics of growing and dissolving grains were considered to follow those of single crystals in a matrix. Depending on the shape of crystals, rounded or faceted, different kinetic equations were adopted for growing grains and an identical equation for dissolving grains. Effects of such critical parameters as step free energy, temperature, and liquid volume fraction were evaluated.

This work is to present a new synthesis of metallic glass (MG)/metallic glass (MG) composites using gas atomization and spark plasma sintering (SPS) processes. The MG powders of (CuA) and (NiA) as atomized consist of fully amorphous phases and present a different thermal behavior; (glass transition temperature) and (crystallization temperature) are 716K and 765K for the Cu base powder, but 836K and 890K for the Ni base ones, respectively. SPS process was used to consolidate the mixture of each amorphous powder, being in weight. The resultant phases were Cu crystalline dispersed NiA matrix composites as well as NiA phase dispersed CuA matrix composites, depending on the SPS temperatures. Effect of the second phases embedded in the MG matrix was discussed on the micro-structure and mechanical properties.

In this study, AR (aromatic resin) pitch was employed as the matrix-precursor for carbon/carbon composite because it exhibits much higher coke yield than coal tar pitch. As a result, a fabrication process of carbon/carbon composites can be shortened. It has been known that the pitches may cause swolling problem during the carbonization process. In order to restrain the swelling occurrence, a small quantity of carbon black was added to the AR pitch. Due to addition of carbon black the swelling was decreased largely and the perform can be infiltrated with the AR pitch. The densification efficiency of the performs was compared with various matrix-precursors. The coke yield of matrixprecursors, the morphology and the degree of graphitization of carbon matrix were analyzed.

The polymer-ceramic hybrid, known as 'ceramer', was synthesized by a sol-gel process by incorporating different amount of alkoxide as source of silicon in resorcinol-formaldehyde in presence of basic catalyst to get different percentage of silicon in ultimate carbonized composites. FTIR of the ceramer confirms that it is a network of Si-O-Si, Si-O-CH2 and Si-OH type groups linked with benzene ring. Different amount of silicon in the ceramer exhibits varying temperature of thermal stability and lower coefficient of thermal expansion as compared to pure resorcinol-formaldehyde resin. The lower value of CTE in ceramer is due to existence of silica and resorcinol -formaldehyde in co-continuous phase. Unidirectional composites prepared with ceramer matrix and high-strength carbon fibers show lower value of flexural strength at polymer stage as compared to those prepared with resorcinol-formaldehyde resin. However, after heat treatment to 1450℃, the ceramer matrix composites show large improvement in the mechanical properties, i.e. with 7% silicon in the ceramer, the flexural strength is enhanced by 100% and flexural modulus value by 40% as compared to that of pure resorcinol-formaldehyde resin matrix composites.

본 연구는 당근과 양파에서 발아력 증진에 미치는 osmotic priming과 SMP효과를 비교하기 위해 수행되었다. Osmotic priming과 SMP 처리과정중 작물별 수분흡수율은 처리 1시간 후 급속한 수분흡수가 이루어졌고, 두 작물 모두 osmotic priming이 SMP보다 수분흡수 속도가 빨랐다. 이러한 경향은 처리 4시간까지 유지되었다. 처리최종일의 수분흡수율은 당근과 양파에서 osmotic priming이 SMP보다 2%높았다. Osmotic priming과 SMP 처리는 두 작물 모두 발아율을 향상시키지 못했지만 T50 및 MDG는 단축되어 조기발아 하였으며, 이러한 경향은 저온인 15℃에서 더욱 현저하였다. Osmotic priming과 SMP 처리 후 초기함수율로 재건조하면 당근에서는 발아속도에 큰 차이가 없었으나, 양파에서는 표면건조에 비해 발아속도가 지연되었다. Osmotic priming과 SMP 상호처리간 발아력을 비교한 결과 두 작물 모두 SMP 처리가 osmotic priming보다 발아촉진에 효과적이었다. 당근과 양파종자를 osmotic priming과 SMP 처리하면 묘출현율도 향상되었고, 묘출현에 소요되는 일수를 단축시켜 신속한 묘출현을 유도하였다. 그러나 묘출현에 이은 유묘의 초기생육에는 통계적인 유의성은 인정되지는 않았으나 osmotic priming과 SMP 처리된 종자는 무처리에 비해 향상되었다.