검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 685

        341.
        2008.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The purpose of this study was to compare spatio-temporal parameters during walking between patients with idiopathic Parkinson's disease and a control group matched for age, height, and weight. Thirty-three subjects were included in this study. Fifteen normal subjects (age, 63.3±5.8 yrs; height, 164.1±8.7 cm; weight, 60.7±17.5 kg) and eighteen patients (age, 64.0±7.7 yrs; height, 164.7±7.3 cm; weight, 63.6±7.7 kg) participated in the study. The Vicon 512 Motion analysis system was used for gait analysis in each group during walking, with and without an obstacle. The measured spatio-temporal parameters were cadence, walking speed, stride time, step time, single limb support time, double limb support time, stride length, and step length. Results in stride length and step length, when walking without an obstacle, showed a significantly greater decrease in the patient group compared to the control group. During walking with an obstacle, the patient group showed a significantly greater decrease in the step length as compared to the control group. For the control group, there were significant decreases in parameters of cadence and walking speed and increases in parameters of stride time, step time, and single limb support time when walking with an obstacle. The patient group had lower cadence and walking speed and higher stride time, step time, and single limb support time during walking with an obstacle than in walking without an obstacle. These results suggest that patients with Parkinson's disease who walk over an obstacle can decrease cadence, stride length, and step length. Further study is needed, performed with more obstacles and combined with other external cues, such as visual or acoustic guides.
        4,000원
        342.
        2008.08 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        The properties of pyrolytic carbon (PyC) deposited from C2H2 and a mixture of C2H2/C3H6 on ZrO2 particles in a fluidized bed reactor were studied by adjusting the deposition temperature, reactant concentration, and the total gas flow rate. The effect of the deposition parameters on the properties of PyC was investigated by analyzing the microstructure and density change. The density could be varied from 1.0 g/cm3 to 2.2 g/cm3 by controlling the deposition parameters. The density decreased and the deposition rate increased as the deposition temperature and reactant concentration increased. The PyC density was largely dependent on the deposition rate irrespective of the type of the reactant gas used.
        4,000원
        344.
        2008.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Temperature dependent development of Tetranychus. urticae Koch was studied on the leaf of eggplant at 17, 22, 27, 32 and 37℃, T. urticae showed a minimum mortality at 27℃ and it increased at higher or lower temperatures than 27℃. The hatchability was low at 17 and 37℃. The duration of development decreased with increasing temperatures i.e., 5.3d at 37℃ and 25.8d at 17℃. Linear regression analysis of temperature vs. rate of development yielded the higher r² ≥ 0.88 resulting in a good fit of the estimated line in the range of 17~37℃. Developmental zero temperature was 12.5℃ for the entire immature stage of female and 12.8℃ for that of male. Thermal constants were 80.5 and 74.7 degree days for those of female and male, respectively. Adult life span and oviposition period decreased with increasing temperatures. The number of eggs laid per female peaked at 141.0 eggs at 27℃, while that was a minimum 78.0 eggs at 37℃. Rate of hatchability, ratio of female, and R₀ were increased up to 27℃, and than declined thereafter. Intrinsic rate of natural increase (Rm) increased with rising temperatures and showed a maximum 0.5652 at 37℃. Also, λ increased with increasing temperature. Doubling time (Dt) and generation time (T) decreased with increasing temperature.
        4,000원
        346.
        2008.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        한반도와 그 주변에서 발생한 44개의 지진에 대한 지진원 상수들을 결정하여 그들 사이의 관계를 조사하였다. 모서리 주파수와 지진모멘트의 결정에는 Snoke(1987)의 방법을 적용하였다. 일반적으로 하나의 지진에 대하여 다른 관측소에서 결정된 지진원 상수들은 서로 다른 값을 보여 준다. 이러한 불일치는 지진원에서의 에너지 확산과 전파과정중의 감쇠 및 증폭의 방향별 차이에 대한 불충분한 고려에서 기인하는 것으로 해석된다 이러한 방향에 따른 효과를 제거하기 위하여 모서리 주파수와 지진모멘트는 평균값을 취했으며, 이 평균값으로부터 다른 지진원 상수들을 결정하였다. 이 연구에서 구한 정적인 응력강하량은 일정한 크기 이상의 지진에 대하여 지진모멘트와 무관한 경향을 보여 준다. 지진모멘트가 대략 1.0×1022 dyne-cm(ML = 4.0에 대응) 이하인 지진은 지진모멘트가 감소함에 따라 응력강하량이 감소하는 경향을 보여준다. 이 사실은 어떤 한계규모 이하의 지진에서 지진원 상수들 사이의 비례법칙이 깨짐을 의미한다.
        4,200원
        347.
        2007.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 논문에서는 구조의 재료물성치와 기하학적 인수의 공간적 불확실성에 의한 구조 응답변화도 산정을 위한 정식화를 제안하였다. 정식화는 추계론적 유한요소해석의 해석법 중의 하나인 가중적분법을 기본으로 하였다. 해석 대상 구조는 전단변형을 포함하는 평판구조로서, 평판구조에 나타날 수 있는 불확실 인수로는 재료적 측면에서는 재료탄성계수와 포아송비가 있으며, 기하학적 인수로는 평판의 두께를 들 수 있다. 선형탄성 영역에서 선형성을 나타내는 재료탄성계수와는 달리 평판의 두께는 3차함수로 강성에 기여하고, 포아송비의 경우 분수의 형태로 강성에 기여하므로 직접적으로는 이를 추계론적 해석에 고려할 수 없다. 따라서 본 연구에서는 적합행렬내의 포아송비를 Taylor전개하여 사용하였다. 제안된 정식화에 의한 결과는 기존 연구결과는 물론 몬테카를로 해석에 의한 결과와도 비교하여 제안한 정식화를 검증하였다.
        4,200원
        348.
        2007.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        한반도 동해에서 자연 상태의 해빈(낙산-오산 해빈)과 인공구조물이 설치된 해빈(안목-염전 해빈)의 퇴적물을 조사하고 두 해빈간의 차이를 확인하기 위하여 2004년 홍수기와과 2005년 갈수기에 해빈의 후안 및 전안에 대해 걸쳐 조사를 실시하였다. 낙산-오산 해빈의 후안 및 전안에서는 해빈 남측으로 가면서 평균입도가 세립해지고 분급이 양호해지는 등 퇴적상과 조직변수가 일정하게 변화하였으며 계절간의 변화가 크지 않았다. 그러나 안목-염전 해빈은 낙산-오산 해빈에 비해 후안 및 전안의 평균입도가 조립하고 분급이 불량하며 양의 왜도 값이 많았고 연근해를 포함하여 조직변수의 전체적인 변화 경향성을 찾기가 어려웠다. 이러한 두 해빈의 특징은 해안을 따라 흐르는 연안류가 해안선의 형태에 따라 변화하고 이로 인해 퇴적물의 특성에 영향을 주었기 때문으로 생각된다. 특히 안목-염전 해빈은 인공구조물(안목항)이 연안류의 흐름을 막아 자연 상태와는 다른 퇴적환경의 변화를 일으키는 것으로 생각된다. 또한, 안목-염전지역은 항만의 공사가 추가로 계획되어 있어 향후 지속적인 변화가 있을 것으로 예상된다.
        4,200원
        349.
        2007.11 구독 인증기관 무료, 개인회원 유료
        This paper introduces radio frequency identification(RFID) information technologies for item management such as application interface of data protocol, data encoding rules and logical memory functions for data protocol, and, unique identification for RF tags. This study presents reference architecture and definition of parameters to be standardized, various parameters for air intreface communications, and, application requirements profiles.
        4,000원
        350.
        2007.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 재래 돼지의 산육 능력을 개량하기 위한 기초 자료를 제공하기 위하여 축산과학원에서 2001년부터 2006년까지 20 kg에 검정을 개시하고 70 kg에 검정을 종료하여 발육 능력을 조사한 546개의 재래 돼지 산육 능력 검정 자료를 활용하여 유전모수를 추정하였으며, 재래 돼지 사육 농가의 사양방법 개선을 위하여 2003년부터 2005년까지 조사된 재래 돼지성돈 및 검정돈 132두의 발육 단계별 체중 및 체위 조사 자료를 다중 회귀 분석하여 재
        4,000원
        351.
        2007.09 구독 인증기관 무료, 개인회원 유료
        본 연구는 체세포를 이용하여 생산된 복제 한우 수소의 번식능력을 검토하기 위해 실시하였다. 복제 한우 수소(C-38 및 C-39) 또는 일반 한우 종모우로부터 정액을 채취하여 정자의 수 및 동결 전후의 생존성 등을 살펴보았으며, 정자의 운동성 등은 computer assisted sperm analysis(CASA)를 이용하여 측정하였다. 또한, 이들의 수정 능력을 확인하기 위하여 체외수정과 인공수정을 각각 실시하였다. 정액 성상에서는 복제 수소들과 일반 종모우 간에 정액의 양, 정자의 농도 및 동결융해 후의 생존성 등에서 차이가 나타나지 않았다. CASA를 이용한 분석에서 운동성, 곡선 운동 속도(VCL), 직선 운동 속도(VSL) 및 평균 진행 속도(VAP) 등은 복제 수소의 정액이 일반 종모우의 정액에 비하여 유의적으로 높았다(p<0.05). 체외수정에 따른 수정란의 분화율 및 배반포로의 발달율은 복제 수소와 일반 종모우 간에 차이가 나타나지 않았다. 복제소 정액(C-38)을 이용하여 인공수정을 한 5두의 체세포 복제 대리모에서 암수 각각 한 두씩의 건강한 복제 후대 송아지 2두를 생산하였다. 이상의 결과를 종합하여 보면, 실험에 공시된 복제 수소 개체 간의 차이가 나타나기는 하였지만, 복제 수소는 정액 성상과 정자의 운동성 등에서 일반 종모우와 차이가 없었으며. 또한 인공수정을 통해 송아지를 생산함으로써 정상적인 번식능력이 있음을 확인하였다.
        4,000원
        352.
        2007.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study compared the fixation disparity curve parameters obtained with the Wesson fixation disparity card, the most commonly used method, to those of the Saladin fixation disparity card, a new device. We measured the fixation disparity parameters for 36 subjects who were in their twenties(average 22.39±1.98 years old) who had a monocular best-corrected visual acuity of 18/20 or better, had no strabismus as determined by cover test, had no vertical phoria by the Maddox rod method, and had no ocular history. The x-intercepts were shifted in the base-in direction with the Wesson card than Saladin card( -3.58±3.2, p = 0.000), the y-intercepts were shifted in the exo direction with the Wesson card than the Saladin card( -5.44±6.0, p = 0.000), the slope of fdc with the Wesson card was steeper than the slope obtained with the Saladin card( -1.02±1.36, p = 0.001). The differences were statistically significant for 17 exophores but not for 7 esophores. Type I fixation disparity curves were most common and type III were the next with the Wesson card. The fixation disparity curve parameters measured with these two instruments are different. So fixation disparity curve parameters obtained from one of these instruments cannot be used with normative findings from the other.
        4,000원
        353.
        2007.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        이 논문은 선박의 자동조타장치를 음성인식으로 제어할 수 있는 시스템을 개발하기 위한 기초연구로 SMCP(IMO Standard Marine Communication Phrases)에 제시된 조타명령문의 구성 형태를 분석하여 화자의 의도를 예측할 수 있는 특정 파라미터를 추출하였다. 그리고 이 파라미터를 이용하여 1차 패턴인식 과정으로부터 도출된 후보단어 집합으로부터 최종 단어를 결정하는 후처리 인식 프로시저를 설계하였다. 이 프로시저의 유용성을 검증하기 위하여 음성인식용으로 총 525개의 조타명령문을 획득하였고, 표준패턴 기반의 인식과정 인식률과의 비교실험을 수행하였다. 실험결과 의도예측 특정 파라미터를 이용한 인식 프로시저의 인식률이 약 42.3% 향상되어 유효함을 알 수 있었다.
        4,000원
        354.
        2007.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This paper analyses the effect of parameters on the consequences of the unconfined vapor cloud explosion accident (UVCE) by the release of heavy gas (xylene vapor). Simulation results showed that the overpresure was increased with the increase of the release hole diameter and with the decrease of the interested distance and the wind speed. While, the overpresure was not nearly affected by the release height, weather and environmental conditions. From the results of the consequence analysis and analysis of affecting the consequences of UVCE, the emergency plan should be established taking into account these parameters.
        4,000원
        358.
        2007.03 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 방사성폐기물의 화학처리공정에 자주 사용되는 유동관식 장치 중 튜브형 반응기, 다단식 용매추출 장치, 흡착탑 등 물질전달이 수반되는 장치에 있어 각종 매개변수들이 반응수율이나 물질전달수율에 미치는 영향과 민감도를 살펴보았다. 먼저 각 장치에 대한 거동을 묘사하기 위하여 수학적 모델링을 수행하였고 전산모사를 통하여 해당 장치의 거동을 예측하였다. 그리고 그 결과로부터 해당 공정의 고유한 매개변수들이 반응수율 또는 물질전달수율에 미치는 영향과 민감도를 분석하였다. 튜브형 반응기에서는 확산계수, 반응속도상수 등이 반응수율에 미치는 영향을, 다단식 용매추출 장치에서는 연속상과 분산상의 분배계수, 연속상 흐름의 역혼합 등이 추출수율 및 장치 내 농도 분포에 미치는 영향을 고찰하였다. 또 흡착탑에 있어서는 흡착평형상수 및 유체-흡착재간 물질전달계수 등이 흡착 속도에 미치는 영향을 조사하였다.
        4,000원
        359.
        2007.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 지진하중을 받는 콘크리트 표면차수벽형 석괴댐(CFRD)의 정상부 변위에 대한 사력재료 주요물성의 민감도를 정량적으로 분석하는데 그 목적이 있다. 이를 위해 현재 운영 중인 국내 CFRD 형식의 D댐에 대해 2가지 지진파, 각 지진파에 대해 2가지 설계진도, 사력재료에 대해 수행된 대형삼축압축시험 결과로부터 얻어진 물성값을 조합하여 만든 물성값이 다른 해석단면 27개를 작성, 총 108개 해석단면에 대한 동적 수치해석을 수행, 그 결과를 이용한 대역적 민감도분석을 수행하였다. 민감도분석 결과, 지진하중 작용 시 댐 정상부 침하량은 입력지진의 종류와 설계진도 크기에 상관없이 절대적으로 사력재료 전단탄성계수에만 영향을 받았으며 댐 정상부 횡변위의 경우에는, 사력재료 전단탄성계수의 영향이 크나 그 영향의 정도는 침하량에 미치는 정도에 비해 상대적으로 작으며, 침하량과는 달리 지진파의 종류와 크기에 따라 차이를 보였다. 본 연구결과에 한해 사력재료의 마찰각은 지진하중에 의한 CFRD 정상부 변위에는 전혀 영향을 주지 않는 것으로 나타났다.
        4,000원
        360.
        2006.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        안근 불균형으로 인한 양안시 이상의 대표적 변수인 사위와 안근 불균형과 관련된 양안시 이상의 다른 변수간의 상호관계를 분석, 조사하여 임상에서 외사위가 있는 사 람의 진단 및 처치의 우선순위를 결정하기 위하여 본 연구를 수행하였다. 안근불균형과 관련된 6가지 변수를 얻기 위하여 사위검사와 융합력 검사, 주시시차 검사를 실시하였으며 피검사자는 18명의 양안시 이상 증상을 느끼는 증상 집단과 23 명의 양안시 이상 증상을 느끼지 못하는 비 증상 집단으로 분류하였고, 증상 집단과 비 증상 집단, 그리고 전체집단으로 검사결과를 비교하였다. 본 연구에 의하여 사위 에 미치는 변수들의 상대적인 영향력의 크기는 전체집단과 증상 집단에서는 Sheard’s criterion > Percival' s criterion > Y -intercept > X -intercept > Slope of F.D.C. 의 순으로 나타났고, 비 증상 집 단에 서 는 Sheard’s criterion > Percival’s criterion > Y -intercept > Slope of F.D.C. > X -intercept의 순으로 나타났다. 결과적으로 검사자가 임상에서 외사위가 있는 사람을 처치할 때 쉐어드기준 (Sheard’s criterion) 이 우선적으로 고려되어야 할 변수로 판단되며, 종합적인 진단 및 처치를 위해서는 주시시차 각 (Y -intercept) 이 부가적으로 고려되어야 할 변수로 판단 되었다.
        4,000원