본 연구는 생물전환된 대두의 isoflavone 함량, 총 페놀함량, 항산화능(DPP radical 소거능, ORAC 지수) 및 β-Glucan 함량을 측정하였다. Isoflavone의 경우 추출용매에 상관없이 배당체가 모두 비배당체로 전환되는 것을 확인하였다. Total isoflavone 함량의 경우 hexane 탈지 대두박발효물에서 2577.96 μg/mL으로 가장 높은 값을 나타냈으며, ethanol 탈지 대두박 비발효물에서 428.27 μg/mL으로 가장 낮은 값을 나타내었다. 총 페놀 함량은 대두 원물에서 39.44 mg GAE/g으로 나타났으며, ethanol 탈지 대두박비발효물 및 hexane 탈지 대두박 비발효물은 27.07, 27.75 mg GAE/g으로 대두 원물보다 다소 낮은 값을 나타냈다. 생물전환된 대두의 총 페놀 함량은 hexane 탈지 대두박발효물 41.61 mg GAE/g, ethanol 탈지 대두박 발효물42.34 mg GAE/g으로 비발효물에 비해 약 1.5배 가량 증가된 함량을 보였다. DPPH radical 소거능의 경우 대두 원물에서 51.10%의 소거능을 나타내었고 hexane 탈지 대두박 비발효물에서 50.51%, ethanol 탈지 대두박 비발효물은 43.27%의 소거능을 나타냈다. 생물전환된 ethanol 탈지 대두박 발효물에서 59.92%로 radical 소거능이 증가되었지만 hexane 탈지 대두박 발효물은 31.30%로 비발효물에 비해 낮은 radical 소거활성을 보였다. ORAC 지수는 대두 원물이 384.47 μM TE/g을 보였으며, hexane 탈지 대두박 비발효물 및 ethanol 탈지 대두박 비발효물은 318.52, 247.48 μM TE/g으로 나타났다. 생물전환된 hexane 탈지 대두박 발효물은 786.36 μM TE/g, ethanol 탈지 대두박 발효물에서 721.96 μM TE/g으로 비발효물에 비해 ORAC 지수가 증가하는 것으로 나타났다. β-Glucan 함량은 0.09~0.11%의 범위로 나타났으며 대두 원물과 ethanol 탈지 대두박 발효물에서 가장 높은 0.11%를 보였고 hexane 탈지 대두박 비발효물과 hexane 탈지 대두박 발효물에서 0.09%로 가장 낮은 β-glucan 함량을 보였지만, 추출용매 및 생물전환에 따른 β-glucan 함량의 큰 차이는 나타나지 않았다.

Noncontact direct-printed conductive silver patterns with an enhanced electrical resistivity are fabricated using a silver ink with a mixture of silver nanoparticles and nanoplates. The microstructure and electrical resistivity of the silver pattern are systematically investigated as a function of the mixing ratio of the nanoparticles and nanoplates. The pattern, which is fabricated using a mixture with a mixing ratio of 3(nanoparticles):7(nanoplates) and sintered at 200oC shows a highly dense and well-sintered microstructure and has a resistivity of 7.60 μΩ·cm. This originates a mutual synergistic effect through a combination of the sinterability of the nanoparticles and the packing ability of the nanoplates. This is a conductive material that can be used to fabricate noncontact direct-printed conductive patterns with excellent electrical conductivity for various flexible electronics applications, including solar cells, displays, RFIDs, and sensors.

This study was aimed to develop a gruel using rice extrudates and to evaluate physicochemical properties of Tarakjuk (milk porridge; MP) prepared with milk (M) and rice powder (RP, control), rice extrudate (RE), or enzyme treated rice extrudates (ETR). Pasting property of ETR was significantly different from those of RP or RE with significantly low peak viscosity, breakdown and setback values in the ETR sample. Viscosity of MP prepared with ETR was also significantly low, as compared to that of control (> 900 cP). The total solids and spreadability of MP with ETR was higher than those with RP or RE. Hunter color values varied significantly depending on enzyme treatment levels in ETR samples with enzyme dose-dependent increase in b-value. Average starch digestibility of ETR sample was higher by 10.2% than that of control sample. DPPH radical scavenging activities of ETR samples were greater than those of RE or RP. These results indicated that ETR could be beneficial for preparing easy-drink and diet food with higher starch digestibility and fluidity, especially for gastric tube-fed patients.

In this study, we analyzed the biochemical factors in lotus (Nelumbo nucifera) leaf, stem, and yeonjabang and their effects on serum factor levels in mice fed a high-fat (HF) diet. The loutus leaf showed 9.47±0.30% moisture content, 8.25±0.39% ash, 21.45±1.25% crude protein, and 2.21±0.13% crude fat content; the lotus stem showed 11.84±0.43% moisture, 10.21±0.64% ash, 17.55±0.92% crude protein, and 4.16±0.23% crude fat content; and the lotus yeonjabang showed 11.86±0.50% moisture, 6.81±0.51% ash, 18.71±1.02% crude protein, and 3.95±0.15% crude fat. Blood triglyceride levels were higher in the HF group (146.43±38.81 mg/dL), and lower in the HF+yeonjabang groups (98.00±17.18 mg/dL). In particular, blood triglyceride levels were significantly lower in the groups that had 10% dry yeonjabang powder added to the high-fat diet. The inclusion of excessive high-fat diet increased concentrations of serum insulin and leptin. Serum leptin concentrations were highest in the HF group mice (3.00±1.35 ng/dL), whereas they were significantly lower in the HF+yeonjabang groups by 1.34±0.52 ng/dL (p<0.05). Thus, addition of dry yeonjabang powder to the high-fat diet was more effective in regulating the levels of serum triglycerides and leptin in mice. Additional studies would help in the development of yeonjabang as a functional food.

This study investigated grape powder substituted for wheat flour in muffin recipes with the amounts of 0, 5, 10, 15, and 20%. Grape powder consisted of 6.76% of moisture content, 4.63% of crude protein, 4.82% of crude fat and 4.16% of crude ash. DPPH radical scavenging activity is 68.79%, total phenol content is 205.79. Specific loaf volume have decreased as the grape powder content increased. Baking loss have increased as the grape powder content increased. Moisture and brix have increased as the grape powder content increased. pH have increased as the grape powder content decreased. Chromaticity measurement result showed that the ‘L’ and ‘b’ value of muffins decreased as grape powder content increased, whereas ‘a’ value increased. The texture measurement result showed that the hardness, gumminess and chewiness of muffins increased as the grape powder content increased, whereas springiness decreased. Cohesiveness did not show any considerable differences between muffins. Overall preference scores showed high overall acceptability for the muffins made with 10% grape powder

The objectives of this study were to investigate the quality characteristics of Jeungpyun added with goji berry powder (0, 2, 4, 6%) and to develop functional Jeungpyun as snack for the elderly. The volume of batter without goji berry powder increased 2.9 times after 4 hrs of fermentation, whereas those with 2, 4, and 6% goji berry powder increased 1.8~1.9 times. The pH and brix of the batter increased by increasing the concentration of goji berry powder. The expansion volume of Jeungpyun decreased by increasing the concentration of goji berry powder. The pH of Jeungpyun was higher than that of Jeungpyun batter in all groups. However, the brix of Jeungpyun was lower than that of Jeungpyun batter in all groups. The L value of Jeungpyun decreased, whereas a and b values increased by increasing the concentration of goji berry powder. The consumer acceptability score was higher in the elderly than in university students. Jeungpyun with 4% goji berry powder had best ratings in taste and overall preference. The DPPH free radical scavenging antioxidant activity of Jeungpyun significantly increased with increasing concentration of goji berry powder. Therefore, goji berry Jeungpyun is available as a snack for the elderly and can be added to goji berry powder up to 4%.

This study was conducted to assess the quality characteristics and antioxidant activity of Yanggaeng prepared with different concentrations of blackcurrant powder (0, 1.5, 3, and 4.5%). The moisture content ranged from 41.95% to 45.38%, exhibiting no significant differences between the groups. The pH gradually decreased with increasing levels of blackcurrant powder. The lightness (L) value decreased while redness (a) value increased with an increasing amount of blackcurrant powder. Hardness of the control group was lower than those of the treatment groups. Consumer acceptance test revealed no significant differences in surface color, smell, taste, and overall acceptability scores between the control and 3% added groups. The total polyphenol contents and total anthocyanin contents were 7.58~54.88 mg GAE/100 g and 0.00~4.20 mg C3G/100 g), respectively, which increased proportionally with increasing levels of blackcurrant powder. The antioxidant activity measured based on 1,1-diphenyl-2-picrylhydrazyl (DPPH) and 2,2'-azino-bis(3-ethylbenzothiazoline-6- sulfonic acid) (ABTS) radical scavenging activity and ferric reducing antioxidant power (FRAP) were significantly higher in treatment groups than the control and increased as the concentration of blackcurrant powder increased. From the above results, blackcurrant powder up to 3% can be incorporated into Yanggaeng to satisfy taste and functional needs for consumers.

Ginsenosides are sensitive to various factors such as pH, temperature, ionic strength, etc. However, powdery form of ginseng is good to preserve ginsenosides in it compared to the extracted form. In addition, the ginseng powder can provide pickering effect to control emulsion stability as a substitute of emulsifier forming wall on the surface of oil. A ginseng pickering emulsions was prepared by mixing, MCT oil, polysorbate 80 and ginseng. Thereafter, to homogenize the emulsions magnetic stirrer, homogenizer and ultra sonicator were used. The physicochemical properties, stability, and bioaccessibility of the ginseng pickering emulsion were investigated. Both particle size and polydisperse index of the ginseng pickering emulsion were constant as time elapsed. However, pH and zeta-potential of the ginseng pickering emulsion decreased over time. Moreover, to find out the proper amount of ginseng powder, different ginseng powder weights were added to sample respectively and the physiochemical characteristics were measured. The pH and zeta-potential value tended to decrease following increase of amount of ginseng powder. This result is impacted to food quality and it could be used as a preliminary result in the development of food product.

Garlic (Allium sativum) has been used as a medicinal plant due to its various functionalities such as reduction of cholesterol levels. The purpose of this study was to optimize conditions for the production of microencapsulated garlic powder (MGP) coated with whey protein isolate (WPI) to improve its production yield. WPI was mixed with distilled water followed by magnetic stirring at 500 rpm for 12 h to hydrate it completely. Garlic powder (GP) was added into the WPI mixture. Ratio of GP to WPI was 1:1. Subsequently, GP-WPI mixture was homogenized, and then spray-dried. To maximize the production yield of MGP, variables such as the mixing time and homogenizing condition such as rpm and time were tested. The optimum conditions for producing MGP were found to be as follows: GP and WPI mixing for 1 h and homogenizing at 8100 rpm for 10 min which improved liquid flow rate during spray drying process. The production yield of MGP under optimum conditions was 25.6 g/h. The results of this study might provide scale-up parameters on applications of GP for its commercialization.

Recently, the incidence of cardiovascular diseases including high blood pressure and heart disease has increased with increased meat consumption in Korea. This study was performed to determine the optimal mixing ratio among ratios of 0, 1:0, 0:1, 1:1, 2:1, and 1:2 of mulberry leaf powder to mulberry fruit powder based on the anti-inflammatory effects. Then, the quality characteristics of the sauce for meat prepared with different mixing ratios (0, 1:1, 1:2, 1:3, 1:4, and 1:5) of mulberry leaf powder to mulberry fruit powder were assessed. The inhibitory effects of ML2MF1 (2:1 ratio of mulberry leaf powder to mulberry fruit powder) on NO and TNF-α production were superior to those of other mixing ratios. With respect to color values of the sauce for meat prepared with different mixing ratio of mulberry leaf powder to mulberry fruit powder, as the mulberry fruit powder mixing ratios was increased, redness was increased but lightness and yellowness were decreased. The sensory evaluation of ML1MF5S (1:5 ratio of mulberry leaf powder to mulberry fruit powder) sauce for meat showed the highest score with respect to color, smell, taste, harmony with meat and the overall preference. In conclusion, as the mulberry leaf powder mixing ratio was increased, the anti-inflammatory activities were increased. But sensory evaluation scores were increased as the mulberry fruit powder mixing ratio was increased. Therefore, by performing further study, the method to increase mulberry leaf powder in the mixing ratio for improving the sensory evaluation should be provided.

A sintered body of TiB2-reinforced iron matrix composite (Fe-TiB2) is fabricated by pressureless-sintering of a mixture of titanium hydride (TiH2) and iron boride (FeB) powders. The powder mixture is prepared in a planetary ball-mill at 700 rpm for 3 h and then pressurelessly sintered at 1300, 1350 and 1400oC for 0-2 h. The optimal sintering temperature for high densities (above 95% relative density) is between 1350 and 1400oC, where the holding time can be varied from 0.25 to 2 h. A maximum relative density of 96.0% is obtained from the (FeB+TiH2) powder compacts sintered at 1400oC for 2 h. Sintered compacts have two main phases of Fe and TiB2 along with traces of TiB, which seems to be formed through the reaction of TiB2 formed at lower temperatures during the heating stage with the excess Ti that is intentionally added to complete the reaction for TiB2 formation. Nearly fully densified sintered compacts show a homogeneous microstructure composed of fine TiB2 particulates with submicron sizes and an Fe-matrix. A maximum hardness of 71.2 HRC is obtained from the specimen sintered at 1400oC for 0.5 h, which is nearly equivalent to the HRC of conventional WC-Co hardmetals containing 20 wt% Co.

The principal objective of this study was to evaluate the utilization of fish paste with added Capsosiphon fulvescens powder were 0, 3, 5, and 7%. The moisture, crude protein, crude lipid, crude ash and carbohydrate contents of the used Capsosiphon fulvescens powder were 8.5, 33.2% 1.1, 9.6, and 47.6%, respectively. For the Hunter color values, the L, a values of the fish paste decreased with increasing concentrations of Capsosiphon fulvescens powder. The b values of the fish paste appreciation with increasing concentrations of Capsosiphon fulvescens powder. And the folding test which represent the flexibility of the fish paste, all test samples showed AA. In the texture meter test, the hardness, strength, cohesiveness, and springiness increased according to increasing concentrations of Capsosiphon fulvescens powder. However, the gumminess and brittleness of the fish paste reduced by the addition of Capsosiphon fulvescens powder. In the sensory evaluation, color and taste of the fish paste were preferred 5% Capsosiphon fulvescens powder and the fish paste prepared with 5% Capsosiphon fulvescens powder were preferred over other fish pastes. These results suggest that Capsosiphon fulvescens powder can be applied to fish paste for the purpose of high quality and functionality.

TiOF2, which has remarkable electrochemical and optical properties, is used in various applications such as Li-ion batteries, electrochemical displays, and photocatalysts. In addition, it is possible to utilize the template which is allowed to synthesize fluorine doped TiO2 powders with hollow or faceted structures. However, common synthesis methods of TiOF2 powders have some disadvantages such as the use of expensive and harmful precursors and batchtype processes with a limited production scale. In this study, we report a synthetic route for preparing TiOF2 powders by using an inexpensive and harmless precursor and a continuous ultrasonic spray pyrolysis process under a controlled atmosphere to address the aforementioned problems. The synthesized powder has an average size of 1 μm, a spherical shape, a pure TiOF2 phase, and exhibits a band-gap energy of 3.2 eV.

An optimum route to synthesize Ti-Mo system powders is investigated by analyzing the effect of the heat treatment atmosphere on the formation of the reaction phase by dehydrogenation and hydrogen reduction of ball-milled TiH2-MoO3 powder mixtures. Homogeneous powder mixtures with refined particles are prepared by ball milling for 24 h. XRD analysis of the heat-treated powder in a hydrogen atmosphere shows TiH2 and MoO3 peaks in the initial powders as well as the peaks corresponding to the reaction phase species, such as TiH0.7, TiO, MoO2, Mo. In contrast, powder mixtures heated in an argon atmosphere are composed of Ti, TiO, Mo and MoO3 phases. The formation of reaction phases dependent on the atmosphere is explained by the partial pressure of H2 and the reaction temperature, based on thermodynamic considerations for the dehydrogenation reaction of TiH2 and the reduction behavior of MoO3.

Muffin was developed using blueberry powder and the shelf life of the muffin packaged in modified atmosphere was determined. Blueberry was freeze-dried and milled to prepare powder. As the concentration of blueberry powder increased from 0 to 15% (w/w), hardness and gumminess also increased (p<0.05). The Hunter L and b values of the crust and crumb of muffin decreased as the concentration increased, while their Hunter a values increased. Blueberry powder concentrations of 10 and 15% resulted in high preference in taste, texture, and overall acceptability. Blueberry muffin containing powder at 10% was packaged in modified atmosphere (MA). The optimum gas for modified atmosphere packaging (MAP) of the muffin was the mixture of carbon dioxide (CO2) and nitrogen (N2) (7:3), which improved microbial stability without altering muffin hardness. The shelf life of modified atmosphere packaged blueberry muffin was determined using the accelerated life test. The shelf life values for MA packaged blueberry muffin stored at 25 and 35°C were predicted as 21 and 5 d, respectively. Further, the Q10 values for 25- 35°C and 35-45°C were determined as 4.2 and 2.9, respectively. The MAP can preserve blueberry muffin for 3 weeks at 25°C, without the external addition of preservatives.

In this study, Fe-Cu-Ni-Mo-C low alloy steel powder is consolidated by spark plasma sintering (SPS) process. The internal structure and the surface fracture behavior are studied using field-emission scanning electron microscopy and optical microscopy techniques. The bulk samples are polished and etched in order to observe the internal structure. The sample sintered at 900oC with holding time of 10 minutes achieves nearly full density of 98.9% while the density of the as-received conventionally sintered product is 90.3%. The fracture microstructures indicate that the sample prepared at 900oC by the SPS process is hard to break out because of the presence of both grain boundaries and internal particle fractures. Moreover, the lamellar pearlite structure is also observed in this sample. The samples sintered at 1000 and 1100oC exhibit a large number of tiny particles and pores due to the melting of Cu and aggregation of the alloy elements during the SPS process. The highest hardness value of 296.52 HV is observed for the sample sintered at 900oC with holding time of 10 minutes.

A Ni-Ti-B alloy powder prepared by mechanical alloying (MA) of individual Ni, Ti, and B components is examined with the aim of elucidating the phase transitions and crystallization during heat treatment. Ti and B atoms penetrating into the Ni lattice result in a Ni (Ti, B) solid solution and an amorphous phase. Differential thermal analysis (DTA) reveals peaks related to the decomposition of the metastable Ni (Ti, B) solid solution and the separation of equilibrium Ni3Ti, TiB2, and τ-Ni20Ti3B6 phases. The exothermal effects in the DTA curves move to lower temperatures with increasing milling time. The formation of a TiB2 phase by annealing indicates that the mechanochemical reaction of the Ni-Ti-B alloy does not comply with the alloy composition in the ternary phase diagram, and Ti-B bonds are found to be more preferable than Ni-B bonds.

The purpose of this study was to investigate the effects of Capsosiphon fulvescens powder on the functional and sensory characteristics of dumpling shell. Various dumpling shell samples were prepared with wheat flour along with the addition of different amounts of Capsosiphon fulvescens powder, and then instrumental characteristics and sensory evaluations were investigated. According to amylograph data, the composite Capsosiphon fulvescens powder-wheat flour samples had increased gelatinization temperatures with increasing Capsosiphon fulvescens powder content; whereas initial viscosity at 95oC, viscosity at 95oC after 15minutes, and maximum viscosity were reduced. In terms of Hunter's color values, L, a and b values decreased with increasing Capsosiphon fulvescens powder content. Besides cooked weight, cooked volume and turbidity of dumpling shell increased as the addition level of Capsosiphon fulvescens powder increase. In terms of textural characteristics, addition of Capsosiphon fulvescens powder increased springiness, chewiness, brittleness, pringiness and adhesiveness. Based on sensory evaluations, the overall preference of dumpling shell with 3% added Capsosiphon fulvescens powder, was more effective than control.

The purpose of this study was to investigate the quality characteristics of makpyeon prepared with dry milled rice powder. The makpyeon samples prepared with dry milled rice powder and various amount makgeolli (0% (CON), 25% (M25), 50% (M50), 75% (M75), 100% (M100)), and analyzed for moisture content, pH, Hunter’s color value, TPA and sensory evaluation. The moisture content did not showed significant difference among makpyeon samples. The L-value, a-value resulted in that CON showed the highest and decreased with the amount of makgeolli. The b-value of makpyeon samples showed that CON was the lowest and increased with the amount of makgeolli. TPA resulted in that M100 showed the highest hardness and the lowest adhesiveness, cohesiveness. Chewiness and gumminess of makpyeon samples were higher than those of CON. Based on quantitative descriptive analysis, the score of brightness, moistness, particle size and gloss of showed higher in CON that in makpyeon samples, firmness increased with the amount of makgeolli. Flavor attributes of liquor odor, sour odor, fermentation odor of makpyeon was stronger in makpyeon samples that in CON with the amount of makgeolli. Acceptance test resulted in makpyeon made with CON, 100% of makgeolli (M100) showed the significantly highest score in taste and overall acceptance.

In this study Muffins adding each 0, 1, 3, 5 7% of Acai Berry powder, which has very high anti-oxidant constituent, have been made, and its quality characteristics have been surveyed. From the volume and specific volume measurement, it has been decreased for MA1, 1% of Acai Berry powder added muffin, but the tendency thereafter has shown increasing (p<0.001). From texture characteristics gumminess and chewiness of MA0, reference group, was the highest by 885.86 g/ cm and 6645.71 g, and has shown decreasing tendency as per the adding rate of Acai Berry powder increased (0.001). The electronics scavenging activity of MA7, 7% added muffin, was the highest by 68.91%, and the ascending order was MA1 < Reference Group < MA3 < MA5 < MA7. From the preference test of Acai Berry powder added muffin, MA3, 3% added muffin, was the most preferable one from color, taste as well as total preference. As the added volume of Acai Berry powder is 5% or more, the typical taste and flavor of Acai Berry gives influence to the taste and flavor of muffin, so the preference level has been decreased. Thus the added volume of Acai Berry powder 5% or more is not recommendable.