본 연구는 하절기 고품질 토마토 공정묘 생산을 위한 차광제 종류와 처리 농도에 따른 소형 간이온실 내부의 온도 하강 효과와 작물생육에 미치는 영향을 구명하고자 실시되었다. 차광제는 Greenshade(Daesung C & S Co. Ltd., Korea)와 Redusol, Reduheat(Mardenkro Co. Ltd., Netherlands)를 각각 30%(water:shade agent = 7:3, v/v)와 60%(30%×2회)의 농도로 처리하였다. 차광제 처리에 따른 식물체 온도는 Greenshade(GS) 30% 처리구에서 가장 낮은 값을 나타냈다. 초장은 처리별 유의차가 없었으며, 경경은 대조구에서 높은 값을 나타냈다. 엽장과 엽폭은 GS 30% 처리구에서 시간이 경과함에 따라 높은 값을 나타냈다. 엽록소 값 역시 GS 30% 처리구에서 가장 높아 Greenshade가 광 선택적 차광제로써 효과적인 것으로 판단된다. 엽록소 형광은 3주차 GS 60% 처리구에서 가장 낮은 값으로 측정되어 스트레스 수치가 높았다. 근장과 엽면적, 지상부와 지하부의 생체중 및 건물중은 차광제 처리에 따른 유의적인 차이가 없었다. 지상부와 지하부의 건물중 무게 비율인 T/R율은 대조구와 GS 30%에서 가장 낮은 값이 나타났다. 따라서 Greenshade 30%를 처리하는 것이 식물체의 온도 저감과 생육에 가장 효과적인 것으로 판단된다.

In this study, cation and anion exchange process for performance evaluation was conducted. A pilot plant for the ultrpure water production was installed with the capacity of 25 m3/d. The various production rate and regeneration of ion exchange rate were tested to investigate the design parameters. The test resulst was applied to calculate the operating costs. Changing the flow rate of the ion exchange capacity of the reproduction reviewed the cation exchange process as opposed to the design value is 120 to 164% efficiency , whereas both anion exchange process is 82 to 124% efficiency, respectively. This results can be applied for more large scale plant if the scale up parameters are consdiered. The ion exchange capacity of the application in accordance with the design value characteristic upon application equipment is expected to be needed. In this study, the performance of cation and anion exchange resin process was evaluated with pilot plant(25m3/d). The ion exchange capacity along with space velocity and regeneration volume was evaluated. In results, the operation results was compared with design parameters.

Super air heater devices have some advantages such as compact structure, energy-saving, long service life and convenient installation. In this paper, an automatic production process for air heaters is proposed to compensate some disadvantages of the manual process. The enhancement of production efficiency and productivity is confirmed through the heat treatment performance test decreasing defectiveness rate of 0.23% compared with the previous device.

It developed 836 units on the classification of KECO. But. Actual companies do not take advantage of improvements in job competency and production processes. This study is improved manufacturing industry production process use to developed the national competency standards(NCS). After we finds process problems, develop production process improvement method.

This paper suggests a specific model that could efficiently improve the interaction and the interface between WMS(Warehouse Management System) terminal and PDA terminal through real time processing in manufacturing shop. The proposed model shows that the new method can more efficiently perform to reduce processing time for shipping and receiving, compared with the current approach. As a result of the certain test among the main server, WMS system, and PDA terminal, it is noted in case of the new proposed system that the effects of proposed model are as follows: (a) While the receiving lead time for carrying by the current method was 2 hours, the receiving lead time by the new method was 20 minutes. (b) While the shipping lead time for carrying by the current method was 1 hours, the shipping lead time by the new method was 15 minutes. (c) While the inventory rate of accuracy by the current method was 85%, the inventory rate of accuracy by the new method was 98%.

Polyurethane is an elastomer polymer, which is flexible, tough and resistant. This material is widely used various fields such as automobile, aeroplane, textiles, construction industries. Currently there exists more than 1,000 manufacturing companies in Korea that are closely related to Polyurethane. In spite of a number of Polyurethane manufacturing companies, there are little attention in academia as well as industries to study the safety and manufacturing process improvement on Polyurethane. In this paper, we consider a case study for the Polyurethane manufacturer to improve productivity by using safety management and manufacturing process reengineering. After careful analysis, we derive three enhancements to increasing the safety and productivity for the target company. Especially, we achieve about 16% productivity improvement in roller manufacturing process by replacing manual stirring job with automated mixing machine.

Workers are avoiding production/manufacturing sites due to the poor working environment and concern over safety. Small and medium-sized businesses introduce new equipment to secure safety in the production site or ensure effective process management by introducing the real-time monitoring technique for existing equipment. The importance of real-time monitoring of equipment and process in the production site can also be found in the ANSI/ISA-195 model. Note, however, that most production sites still use paper-based work slip as a process management technique. Data reliability may deteriorate because information on the present condition of the production site cannot be collected/analyzed properly due to manual data writing by the worker. This paper introduces the monitoring and process management technique based on a direct facility interface to secure safety in the field by improving the poor working environment and enhance there liability and real-time characteristics of the production data. Since the data is collected from equipment in real-time directly through the SIB-based interface and PLC-based interface, problems associated with workers’ manual data input are expected to be solved; safety can also be improved by enhancing workers’ attention to work by minimizing workers’ injuries and disruption.

The application of sublimation transfer printing is widely expanded in the textile industry according to the growth of IT technology. Therefore, its improvement of manufacturing process is strongly needed. In this paper, new manufacturing process of sublimation transfer printing by combining conveyor system and hot plate pressing is developed. New process has improved quality and productivity of sublimation transfer printing. It is shown that the new process has better indices than existing process in the required time, man power, production output and sales. New process is able to cope with mass production and various manufacturing condition actively.

HCFFT (Hybrid Concrete Filled FRP Tube) is consisted of pultruded FRP unit module, filament winding FRP which is in the outside of mandrel composed of circular shaped assembly of pultruded FRP unit modules, and concrete which is casted inside of the circular tube shaped hybrid FRP pile. The pultruded FRP can increase the flexural load carrying capacity and the filament winding FRP can provide the confinement for the concrete filled inside. The axial and flexural load carrying capacities of small diameter HCFFT piles were evaluated through the experimental and theoretical studies. In this study, we suggest the cross-section and manufacturing process of large diameter HCFFT pile which is expected to improve the quality and productibility of large diameter HCFFP pile.

High luminance LED fluorescent light is replaced by halogen light in recent light parts. The housing cover of LED fluorescent light is used many several materials. Though deformity character has less value, polycarbonate cover has cheap, high strength and it is used general purpose. This study is several purposes. 1. No entering foreign matters during continuous extrusion manufacturing process in cutting process, 2. No deformity, exact cutting of pc length and finding method of cutting manufacturing process for polycarbonate cover

It is not easy to establish the correct standard time and standard manhour in a process of small quantity batch production system, especially in a case of irregular quantity of production. Therefore, how to establish rational standard time about manufactu

본 연구에서는 LSW를 이용한 피틴의 생산과정에서 기존의 알칼리 중화법의 단점을 극복하고자 효모발효에 의한 자연 침전법으로 피틴을 회수하는 공정을 개발하였다. LSW에 함유되는 약 3%(w/v)의 젖산은 약 33시간의 효모 발효에 의하여 소모되고 pH가 7.5 정도로 상승함에 따라 LSW에 함유된 피틴산이 기존의 중화법에 사용되는 Ca(OH)2의 투입 없이 피틴으로 침전되어 분리되었다. LSW의 효모발효에 의하여 생성된 피틴의 농도는 약 1.0%(w/v)였으며, 단백질함량은 12.3%(w/w)로서 중화법으로 생산된 피틴보다 현저히 낮은 수준이었다. 또한 효모 발효에 의하여 생성된 피틴은 중화법으로 생성된 피틴보다 약 1.6배 빠른 침전속도를 나타내었다.

This research is to sequence flow shop with two parallel parts production and two assembly machines in sequence. Two different objective functions are studied. One is to minimize total completion time and the other is to minimize the difference of 1 job completion time and total completion time. A heuristic is designed to solve the sequencing problem. Initial solution is developed in the first stage and then the initial solution is improved in the second stage. Experimental 5 job problems are used to evaluate the performance of the suggested heuristic. The optimum solutions obtained by enumeration are used to comparisons. Also 20 job problems are generated for evaluations. 100 randomly generated sequences are evaluated and proved that the distributions are normal. And then presented how good the solutions obtained by suggested method. The initial solution stage is different for the minimization of completion time differences.

The objective of this research is to introduce key performance indicators (KPIs) measuring overall equipment effectiveness (OEE) or overall operation effectiveness (OOE) effectively. OEE is one of the most effective KPI to measure the productivity and quality levels of an equipment-centric manufacturing company and widely implemented with a spreaded TPM (total productive maintenance). OEE is the most representative time-related KPI. For ease of measurement, OEE is calculated on the basis of the quantity of the processing materials and theoretical cycle time instead of using time-related sub-indicators. Hence, setting up theoretical cycle times is the most important aspect of the OEE measurement. Increasing customer's demand and developed manufacturing technology, more products can be made in a machine. So there will be multiple theoretical cycle times in a machine, but they have not been extensively considered for setting up theoretical cycle times in previous research. Futhermore the limitation to measure a performance of an operation which is consists of multiple machines is often mentioned in previous research. This paper shows how to measure OOE based on multiple theoretical cycle time.

This study was conducted to establish process conditions for plant-originated lactic acid production using a mixed culture of plant originated lactic acid bacteria, Lactobacillus sakei B2-16, and Lactobacillus plantarum P23, which were isolated from kimchi, and Bacillus subtilis, which was TP6 isolated from Denjang. Soybean medium was pretreated for 10 minutes at 110℃ and hydrolyzed with 0.2%(w/v) cellulase at 55~60℃ for at least 2 hrs. The quality of the final fermentation product was influenced by the inoculation ratio of the Lactobacillus sakei B2-16, Lactobacillus plantarum P23, and Bacillus subtilis TP6. The optimum microorganism inoculation ratio was 1:0.7:0.3, Lactobacillus sakei B2-16: Lactobacillus plantarum P23: Bacillus subtilis TP6, respectively. The sensory characteristics of the product were a refreshing sourness and a soft flavor.