본 논문은 선박 기관실 내의 효율적인 감시를 위한 팬-틸트-줌(PTZ) 카메라 기반의 모니터링 시스템의 설계 방법을 다룬다. 선
박 기관실에는 여전히 전통적인 아날로그 계기들을 사용하는 곳이 많고, 침수나 화재 등 안전과 밀접하게 관련된 사각지대들이 다수 존
재한다. 이러한 감시 개소들에 대하여 비교적 빠른 주기로 넓은 범위를 보장하는 카메라 기반 감시 시스템은 선박의 안전을 강화시킬 수
있는 효과적인 대안이 될 수 있다. 이에 본 연구에서는 기존 PTZ 카메라의 기능들을 소프트웨어적 방법으로 더욱 강화시킨 형태의 모니
터링 시스템을 제안한다. 보다 구체적으로는 카메라제어 모듈, 위치등록 모듈, 순회제어 모듈, 멀티뷰 영상재구성 모듈로 구성된 모니터
링 시스템의 설계 방법을 제안하고, 제안된 방법은 기관실 환경에서의 실험을 통해 그 효용성을 평가한다.
The efficient nutrient solution cooling system consisting of buffer tank, three-way valve, and heat pump et al. was developed for hydroponics of leafy vegetables at high temperatures period. It was designed in such a way that the buffer tank was first cooled to enable precise temperature control of the nutrient solution with small capacity heat pump. Developed system was installed in the NFT hydroponics farm cultivating leafy vegetables and performance evaluation was carried out. For cultivation of Lalique lettuce(Lactuca sativa var.), the temperature of nutrient solution tank, buffer tank, and the root zone, the performance of cooling system, and the environment of greenhouse were analyzed. Also, by measuring the growth and yield of lettuce, the effect of cooling nutrient solution on the growth of lettuce NFT hydroponics was analyzed.
With the advent of the 4.0 era of logistics due to the Fourth Industrial Revolution, infrastructures have been built to receive the same services online and offline. Logistics services affected by logistics 4.0 and IT technology are rapidly changing. Logistics services are developing using technologies such as big data, artificial intelligence, blockchain, Internet of things, and augmented reality. The convergence of logistics services and various IT new technologies is accelerating, and the development of data management solution technology has led to the emergence of electronic cargo waybill to replace paper cargo waybill. The electronic waybill was developed to supplement paper waybill that lack economical and safety. However, the electronic waybill that appeared to complement the paper waybill are also in need of complementation in terms of efficiency and reliability. New research is needed to ensure that electronic cargo waybill gain the trust of users and are actively utilized. To solve this problem, electronic cargo waybill that combine blockchain technology are being developed. This study aims to improve the reliability, operational efficiency and safety of blockchain electronic cargo waybill. The purpose of this study is to analyze the blockchain-based electronic cargo waybill system and to derive evaluation indicators for system supplementation.
Up to date cosmetic OEM/ODM (original equipment manufacturing/original development manufacturing) industry receives attention as a future growth engine due to steady growth. However, because of limited research and development capability, many companies have employed commercial management platforms specialized for large-sized companies; thus, overall system effectiveness and efficiency is low. Especially, MRP (material requirement planning) system introduced originally in 1970s is employed to calculate the requirement of the parts. However, dynamic nature of production lead time usually results in incorrect requirements. In addition, its algorithm does not consider the capability of the production resources. Also, because the commercial MRP system calculates all subcomponent for fixed period, the more goods have subcomponent, the slower calculation is. Therefore, conventional MRP system cannot respond complicated situation in time. In this study, we will suggest a new method that can respond to complicated situations resulting from short lead time and urgent production order in Korean cosmetic market. In particular, a distributed MRP system is proposed, that consists of multi-functional and operational modules, based on the characteristic of the BOM (bill of material). The distributed MRP system divides components (i.e. products and parts) into several fields and decrease the problem size; thus, we can respond to dynamically changed data any time. Through this solution, we can order components quickly, adjust schedules and planned quantity, and manage stocks reasonably. In addition, a prototype of the distributed MRP system is presented in this paper, in which ERP (enterprise resource planning) sever data is associated with an excel spreadsheet via MSsql. System user interface is implemented by a VBA (visual basic for applications) tool. According to a case study, response rate for delivery and planning achievement rate were enhanced about 20%, and inventory turnover was also decreased. Consequently, the proposed system improves overall profit.
High concentrations of PM2.5 were generated in new apartments before moving in, and PM2.5 reduction efficiencies using air cleaners and ventilation systems were evaluated. The experimental results for different air cleaner capacities showed that the PM2.5 reduction efficiencies for 46.2 m2, 66 m2, and 105.6 m2 areas were 81.7%, 92.9%, and 92.5%, respectively. Thus, the larger the air cleaning application area, the higher the PM2.5 reduction efficiency. However, there was no difference in the efficiency of overcapacity air cleaners above a certain capacity. The efficiencies of air cleaners located at the living room center, interior wall, and edge were 81.7%, 79.2%, and 75.8%, respectively. There was, therefore, no significant difference in the PM2.5 reduction efficiencies of air cleaners in different locations. Furthermore, the PM2.5 reduction efficiencies at distances of 1 m, 2 m, and 3 m were 81.7%, 81.3%, and 81.7%, respectively. Therefore, there was also no significant difference in efficiency with distance. The PM2.5 concentration decreases rapidly during natural ventilation. Therefore, when the indoor PM2.5 is higher than the outdoor PM2.5, the air cleaner should be used after natural ventilation. The efficiency of PM2.5 reduction using an air supply-type ventilation system in apartments was 35%, which is not high. The simultaneous operation of the ventilation system and kitchen range hood was effective, showing a PM2.5 reduction efficiency of 69.1%. However, a water sprayer was not effective, showing a PM2.5 reduction efficiency of 24.3%. The results of this study suggest that PM2.5 reduction performance should be standardized by evaluating the efficiency of different ventilation systems. Effective usage and maintenance standards for ventilation systems need to be disseminated, and ventilation systems and air cleaners should be used effectively.
본 연구에서는 주류공장 내 고농도 CO2 제거 및 포집을 위해 L-alanine 흡수제를 적용하여 CO2 흡수, 탈리 효율을 평가 후 재생 성능을 확인하였다. 탈리공정의 효율적인 처리를 평가하기 위해 실험 실 규모에서 Hot plate, Steam 두가지 탈리 방법을 비교하였으며 Hot plate는 약 10%, Steam의 경우 약 60%의 재생효율을 확인하였다. 따라서 주류공장 내 100m3/min 실증화 규모에 Steam-Tower 탈리공정을 적용하여 최적조건을 평가한 결과 탈리 유량 4L/min 이하, Steam 온도 160℃ 이상, 탈리효율 85.5%로 확 인할 수 있었다.
본 연구에서는 합성가스의 에너지화를 위한 가스엔진 성능 평가를 수행하였다. 회전수 1800 rpm 조건에서 공기과잉률이 1, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6 증가에 따른 엔진출력(kWm)과 열효율(%)을 평가한 결과, 공기과잉률 λ 1.4에서 엔진출력 34 kWm를 나타냈으며, 공기과잉률이 증가할수록 엔진 열효율은 전반적으로 감소하는 경향을 보였다. 엔진출력 34 kWm 조건에서 공기과잉률이 1, 1.1, 1.2, 1.3, 1.4 증가시 열효율이 34.2%, 36.9%, 37.2%, 37.4%, 38.1%로 증가하였고, 발전출력을 통한 종합효율은 발전출 력 30 kWe 부하조건에서 38.7 kg/h의 연료를 소모하여 32.1%의 발전효율과 냉각수와 배기가스에서의 열 회수를 통해 57.3 kW의 폐열을 회수하여 53.8%의 열을 회수하여 총 85.8%의 종합효율을 보이는 것으로 나타났다.
We developed a wet scrubber by applying cyclone flow to the gas flow and using a spiral filter structure. While the size of a new scrubber was about half that of a conventional scrubber, the device showed relatively high efficiency in pollutants removal such as particulate matter and compounds inducing odor. The new scrubber installed in a plating industry showed a higher removal efficiency of about 5% for dust, about 23% for hydrogen chloride, and about 23% for sulfur dioxide compared to the conventional scrubber. Plurality of tubes in the spiral filer housing are arranged to be vertically shifted from each other. Because the upward residual gas does not directly rise vertically, the residence time of gas between the filter plates is extended. Thus, the purification efficiency of the pollutants was enhanced in the new scrubber. In addition, the new scrubber developed in this study is more cost effective because the cost saving in manufacturing it compared with a conventional scrubber increases with increasing the size of equipment. It is expected that a scrubber with better dust collecting efficiency can be obtained by carrying out a study in connection with facilities capable of controlling acidity of washing water.
Molding is the root industry of the manufacturing as a means to mass-produce developed prototypes. Molds are typically divided into injection molds and press mold industries. Injection molds produce the products by injection of molten plastic into a mold, and press molds are molded and bended plate. The ejection system, such as eject pins, is used to separate the manufactured products from the mold, which involves a number of hole operations. Location, diameter and depth of holes are often tabulated and managed collectively when designing 2D drawings. The design efficiency was realized by applying CATIA Automation to the 3D model and bringing in the data of the holes in the Excel data.
다육식물인 에케베리아(Echeveria)는 최근 전세계적으로 수요가 증가하고 있지만, 번식효율이 품종이나 환경 요인의 영향을 크게 받으므로 연중 고품질 묘를 공급하는 것이 어렵다. 이 연구는 밀폐형 식물공장 내에서 LED 파장 조합이 에케베리아 엽삽번식 효율에 미치는 영향을 구명하여 주년 생산의 기초자료를 제공하고자 실시되었다. 번식이 어려운 ‘Afterglow(AG)’, ‘Berkeley Light(BL)’, ‘Mason(MS)’, ‘Subsessilis Light(SL)’, ‘Cream Tea(CT)’, ‘Ben Badis(BB)’ 등 6품종의 모주로부터 균일한 잎을 채취하여 실내온도 24±2℃, 상대습도 60±10%의 식물공장 내에서 혼합상토에 삽목하였다. 청색(B, 450nm), 녹색(G, 530nm), 적색(R, 660nm), 원적색(FR, 730nm) LED를 이용하여 R10, R8+B2, R5+B5, R7+B2+FR1, R7+B2+G1의 비율로 광질을 달리하여 처리하였고, PPFD는 200μmol·m-2·s-1, 광주기는 16/8(명/암) 시간이었다. 그 결과, 번식 효율은 품종에 따라 차이가 있었는데, ‘SL’은 상대적으로 발근과 신초 형성이 쉽게 되었으나, ‘AG’는 발근과 뿌리 생장이 잘 되지 않았다. LED 파장 또한 번식효율에 영향을 주었는데, B 비율이 높은 R5+B5, R7+B2+FR1, R7+B2+G1 하에서 신초 형성과 생장이 촉진된 반면, 발근과 뿌리 생장은 억제되었다. 반대로, R 비율이 높은 R10나 R8+B2 하에서는 부정근 형성 및 생장이 촉진된 반면, 신초 형성 및 생장이 억제되었다. 한편, FR은 잎의 크기와 무게를 증가시켰다. 따라서, 번식이 어려운 에케베리아 품종의 엽삽 시 번식 효율을 높이기 위해서는 각 파장별 효과를 활용한 적정 파장 조성에 대한 연구가 필요하다.
This study introduces the comparison of efficiency levels of photovoltaics systems by analyzing various installation systems of photovoltaics systems and optimization techniques and proposes a system using techniques In this study, the generation time and power generation of two types of photovoltaic power generation system were measured and compared. Comparing the monthly power generation time with the power generation amount, it is found that there are many fixed variable photovoltaic power generation systems with a large average daily power generation time of 0.8h and an average power generation capacity of 2,871kw from November to December. Total Fixed Variable Total Daily Power Generation Time 2.4h The power generation amount is 23,184kw, showing a large amount of electric power generation.
The systematic management of technology infrastructure increasingly becomes critical as it represents the driving power for creating competitive advantage of nations and enterprises. In this sense, public facility and equipment, which is one major asset of technology infrastructure, should be managed effectively, systematically and efficiently to increase its overall equipment effectiveness. However, the manual and off-line communication was the unique way to communicate between the suppliers who provide facilities in the public sector and the customers who utilize the facilities in the industrial sector. This communication way caused invisibility of available usage time and increase of idle time, thereby decreasing the equipment effectiveness. This paper presents an web-based scheduling system that enables real-time collaboration and information sharing for increasing the equipment effectiveness. The designed system performs scheduling, facility management, order management and customer relationship management in an on-line platform, and carries out the processing and storing of relevant information in an integrated database. The paper includes a development approach to identify business process models and standardized system models by using object-modeling technique. The deliverable of the present work will contribute to increasing the equipment effectiveness by enhancing visibility, transparency and predictability by means of the integration with a legacy Enterprise Resource Planning.