본 연구는 직물구조인자인 위사밀도와 직물의 조직을 변화시켜 시직한 면직물을 이용하여 역학특성 및 태의 변화를 KES-FB System을 이용하여 측정하였다. 그 결과 위사밀도가 증가할수록 굽힘특성 및 전단특성이 증가하는 것으로 나타났고, 위사밀도의 변화에 따른 역학특성치 중 굽힘 및 전단특성의 값은 평직이 높게 나타났으며, 인장특성, 압축특성 그리고 표면특성의 값은 조직 및 밀도에 크게 영향을 받지 않는 것으로 나타났다. 한편, 위사밀도 변화에 따른 의복착용성능 중 WC/T, MMD/SMD를 제외한 B/W 및 2HG/G, 2HB/B, 2HB/W, W/T, 그리고 WC/W는 위사밀도에 영향을 받는 것으로 나타났다. 위사방향의 직축은 굽힘특성, 전단특성, 압축회복도(RC), 표면거칠기(SMD), 태와 의복착용성능에 높은 상관을 보이는 것으로 나타났다. 그리고 Tightness는 굽힘특성, 전단특성, 압축특성 그리고 표면 마찰계수와 높은 상관을 보였고, 기본태 및 T.H.V., 의복착용성능에도 높은 상관이 있는 것으로 나타났다.

AGN(Active Galactic Nuclei)의 핵과 BLR(Broad Line Region) 영역의 변광 연구를 위해, 밝은 Seyfert 1 은하들에 대한 밝기 변화 감시 캠페인들이 있었다. 이러한 노력은 주로 지상 관측과 IUE 관측을 통해서 이루어졌으며, 가시광에서 감마선까지 모든 파장영역의 동시 관측도 시도되었다. 우리는 IUE를 이용한 주요 모니터링 대상이었던 NGC 4151과 NGC 5548에 대한 관측자료를 정리하여, 이들 중 SWP(Short Wavelength Prime), 저분산, 대구경 슬릿, 분광 관측 자료들을 분석하였다. Si III] 1892와 C III] 1909의 플럭스비를 통해 BLR의 전자 밀도를 구하였고, C IV 1550 와 C III] 1909 비를 통해 BLR의 온도와 이온호 정도를 가늠하였다. NGC 4151과 NGC 5548의 밀도 변화 폭은 각각 4배, 8배 정도로 작은 변화만을 보여주었다. 이들의 변화를 조사하여 BLR의 물리적 조건과 블랙홀 주위 활동성과 기하학적 특성 파악을 시도하였다. BLR 크기와 C III] 선폭으로부터 구한 중심 블랙홀의 질량은 모두 107 M◉ 정도로 추정된다.

Anchorage plays an important role in orthodontic treatment. Recently, some clinicians have tried to use skeletal anchorage system(titanium miniscrews and microscrews) in treatment due to their many advantages such as ease of insertion and removal, low cost, immediate loading, and the ability to place miniscrews in any area of alveolar bone. The purpose of this study was to investigate the histopathologic change of alveolar bone density around miniscrew under variable ortho -donticforceinyoung-adultdogs, throughthepolarizingmicroscopic findings. For this study, three young adult mongrel dogs(6-months in age) were used, 12 titanium miniscrews were inserted into the palatal bone(4 miniscrews placed in each dog), and then miniscrews were loadedwithorthodonticforce [50gm(F1),100gm(F2),250gm(F3), 500gm(F4)] immediately after implantation. After 1, 3 and 6 weeks, the animals were sacrificed. Then the miniscrews and surrounding bone of dogs were removed, respectively. The grinding samples along the long axis of miniscrew were made. The changes of bone density and thrombosis were examined under the polarizing microscope. Bone density was determined as color changes. The results of this study were as follows. 1. There was no thrombosis in the F1 group. But thrombosis was seen in 1 week of T side, 1, 3, 6 weeks of P side in the F2 group, 1, 3 weeks of T side, 1, 3, 6 weeks of P side in the F3 group and 1, 3, 6 weeks of both P and T side in the F4 group. 2. The changes of bone density decreased in P side more than T side in 1 week, while more decreased P side in 3 weeks than 1 week. In 6 weeks, bone density more increased in T side than P side along the middle & apex. 3. As orthodontic force increased, there was severe thrombosis, especially in cervical of P side. As it went up to 3, 6 weeks, thrombosis was decreased but remained. 4. As orthodontic force increased, bone density more severely decreased due to bone destruction in 1 and 3 weeks, but more slowly increased due to bone formation in 6 weeks. Based on the results of this study, in the practice, because of optimal orthodontic force for the most of tooth movement was less than 150gm, I thought that miniscrews could play role of use of skeletal anchorage immediately after implantation. In the more than 250gm & 500gm of orthodontic force, I thought that miniscrews would be delayed as use of skeletal anchorage after loss of bone was restored.

Jeju Italian millet was grown at five planting densities(55, 1515, 2020, 25cm) form May 13 to Aug. 14, 2000 at jeju island to determine influence of planting density on agronomic characters, forage yield and quality. Days to heading increased from 87 to 8

균일하고 치밀한 미세구조를 갖는 Pd박막이 PdCl2를 사용하는 전기도금방법으로 제조되었다. 본 연구에서는 도금온도와 전류밀도가 주요 공정변수로서 고려되었고 이에 따른 음극효율 및 제조된 Pd도금막의 결정성, 형상 및 경도 등의 특성이 측정되었고, 이들간의 상호관계성이 검토되었다. 연구결과에 따르면, PdCl2를 사용하는 본 Pd전기도금 시스템에서는 50˚C와 5mA/cm2의 조건이 도금막의 형상으로 볼 때, 최적의 도금조건이라고 간주된다. 최적 조건에서 제조된 Pd도금막의 경도는 약 600kg/mm2이었다. 변수 및 특성간의 관계성 검토 결과, Pd막의 경도는 미세구조에 의해 큰 영향을 받지만, 결정의 배향성과의 연관성은 작은 것으로 해석된다.

형광등으로 사용되는 전기 에너지의 40%를 절약할 수 있는 방법으로서 그 반사값을 특수 은 반사박막으로 처리하여 고효율 및 내구성을 갖는 기술이 최근에 알려지고 있다. 이 박막들은 sputtering법을 이용한 것으로 주로 미국에서 생산되어지고 있다. 한편. evaporation 법으로 제작된 은 박막들은 일반적으로 반사효율에는 별문제가 없으나 부착력이 떨어지는 단점이 있다. 우리는 수년간 polyester를 기판으로 하고 몇가지 PVB 방법을 동원하여 고 반사율 및 부착력을 갖는 은경 박막을 확보하기 위해 연구를 해왔다. 그 결과, evaporation 법으로 제작된 은 박막은 96.4%의 반사율을 보이나 부착력은 12 Kg/cm2에 불과함을 확인하였고. sputter 법으로 제작한 시편들의 반사율은 96.3 %로 비슷하였으나 부착력이 /20 Kgcm2로 거의 두배로 뛰어올라 sputter법의 공정조건이 그 결과박막들의 물리적 특성에 미치는 긍정적 영향을 확인할 수 있었다. X-선 회절 분석결과 sputter의 경우에 (111)면이 우선성장함을 알 수 있었고, 시편의 단면으로부터 관찰된 치밀한 columnar 구조가 부착력을 향상시키고 있음이 확인되었다.

An investigation was performed to apply the M3/2 grade high speed steel for metal injection molding using both prealloyed and elementally blended powders. The injected samples were subjected to a debinding step in gas atmosphere at a ratio that affected the carbon content of the material. The carbon content ranged from 1.4wt.% to 1.43wt%. with increasing content up to 80% in atmosphere for the prealloyed powders. The carbon contents of the elementally blended powders exhibited 1.44wt.% and 1.62wt.% at 10% and 20% gas, respectively. This level decreased to 0.17wt.% upon increasing the content. The sintered density of both powders increased rapidly as the temperature reached the liquid phase forming temperature. After forming the liquid phase, the density rapidly increased to the optimum sintering temperature for the prealloyed powders, whereas the density of mixed elemental powders goes up slowly to the optimum sintering temperature. The optimum sintering temperature and density are 126 and 97.3% for the prealloyed powders and 128 and 96.9% for the elementally blended powders, respectively. The microstructure of the specimen at the optimum sintering temperature consisted of fine grains with primary carbides of MC and type for the prealloyed powders. The elementally blended powders exhibited coarse grains with eutectic carbides of MC, and type.

Ihis experiment was carried out to select a carrier as rhizobium inoculant for alfalfa. The Rhizobium inoculants were produced in main materials(organic and inorganic materials) and submaterial(Ca, and sucrose), and than the changes of Rhizobium populatio

As the first step of study on fabrication of ceramic powders from phytoliths in rice, especially in rice husks, pulverization method of rice husks and the properties of milled rice husks were investigated. Impact methods, such as ball milling, were not meaningful for pulverizing elastic and thin fabric structure of rice husks. The most effective one was cutting method. In the present work, a rotating knife cutting method was applied to pulverizing rice husks. A 40-mesh screen was inserted under the rotating knives. The most portion of the milled powder was found in -50/+100 mesh section. Morphology of the milled rice husks revealed that the husks larger than 70 mesh were flake-like shape, at -70/+100 mesh section relatively equi-axed shape, at -170/+325 mesh section rod-like shape, and below 325 mesh section dust-like shape. Tap density of raw rice husks was about 0.1 , while those of milled rice husks were over . This meant that, for a given volume of reactor, raw material charge can be increased more that 4 times when using milled rice husks than unmilled one. True densities of unmilled and milled rice husks were higher than , and increased with decreasing milled sizes.

tall fescue의 밀도변화에 미치는 토양경화는 공극율의 영향에 대하여 조사하였다. 1. 토양경화에 따라서 토양경도와 용적중은 증가되었다. (Table 1). 2. 10kg 처리구(토양경도 2.5kg/ cm3)의 밀도가 타처리구보다 유의하게 높았다. (Table 2, Fig. 1). 3. 토양공성율과 밀도와는 상관계수가 0.9804로써 1%수준의 정상란이 인정되었다. 4. 경화된 토양에서는 공성율이 37.5% 이상일 때 높은 밀도

Fluid in a rotating coordinate generally flows along equi-potential vorticity line. Without disturbances such as dissipation, rapid vertical mixing, and external forcing such as energy exchanges, potential vorticity is conserved in the thermally and dynamically closed system. This study is the first trial to investigate the potential vorticity in the East Sea. The purpose of this study is to show the distribution of the potential vorticity due to the variation of sea water density and topography in baroclinic and barotropic conditions. The conclusions are given as follows. First, vertical mixing is well striking in February than in August, and flow patterns in February are different from those in August. Secondly, contour lines of isotrophe is similar to bottom topography, while potential vorticity is similar to the distribution of dynamic topography. Thirdly, the circulation of the East Sea Water flows approximately along contours of potential vorticity in the region of high baroclinicity and along those of isotrophe in other region.

This study was carried out in 2014 and 2015 to investigate the effect of transplanting density on panicle production and to analyze the relationship of panicle production with yield traits in the mid-maturing quality rice cultivar ‘Haiami’ in the mid-plain area of Korea. Number of tillers per square meter increased by reducing planting distance and increasing seedling number per hill. These effects were maintained until maturity and were reflected in the final number of panicles per square meter, although the effect of planting density decreased as rice growth progressed. However, increased panicle number per square meter following dense planting did not improve head rice yield. Panicle number per square meter was negatively associated with spikelet number per panicle and was not correlated with other yield components or head rice yield. Head rice yield was not correlated with head rice percentage but was closely and positively correlated with milled rice yield. Milled rice yield did not increase with grain filling percentage but increased with spikelet number per square meter. Spikelet number per square meter increased with both spikelet number per panicle and panicle number per square meter, although the former had a greater influence. Therefore, we conclude that head rice yield of the ‘Haiami’ cultivar grown in the mid-plain area of Korea is not improved with an increased panicle number following high planting density but it could be improved with high milled rice yield by increasing spikelet number per unit area.

‘Nunkeunheugchal’ is a waxy black rice variety that has a large embryo. The quality of black rice depends on the anthocyanin content of the rice seed coat, which is mainly determined by cultivation environment. Factors that affect the anthocyanin content include nitrogen level, planting density, transplanting date and harvesting date. This study was carried out to investigate the optimum black rice cultivation conditions by examining the effects of different nitrogen levels and planting densities. An initial study was conducted to determine the optimum nitrogen level in which four levels of nitrogen were applied to the field (0, 4, 8 and 12 kg/10a). As the nitrogen contents were increased up to 8 kg/10a, there was a concomitant increase in rice yields. However, nitrogen levels greater than 8 kg/10a, the yield was maintained at the same level. Correlation analysis indicated that the optimum nitrogen level for maximum yield was 9.6 kg/10a. In addition, anthocyanin levels showed a trend similar to that of yield, with correlation analysis indicating that the optimum nitrogen level for maximum anthocyanin content is 10.6 kg/10a.On the basis of these results, a second study was conducted to determine the optimum combination of planting density and nitrogen level. The planting densities investigated were 30 × 12, 30 × 14, 30 × 16cm and nitrogen levels were 7, 9 and 12 kg/10a. A high planting density (30 × 12cm) was shown to produce higher numbers of tillers and yield. As calculated in the first study, a nitrogen level of 9 kg/10a shown to produce the highest anthocyanin content and yield. Collectively, the results of this study indicate that a planting density of 30 × 12 cm and a nitrogen level of 9 kg/10a is the optimal combination in terms of maximizing both rice yield and anthocyanin content.

The extensive construction works of container terminals progressed since 2006 was converted to small scaled construction works or reclaiming works since 2012 in Busan New Port area. To investigate changes in activity of otters with the change of construction work scales, the linear densities of spraints at 15 localities of 5 areas (I-V) near the Busan New Port construction areas were surveyed during the period from 2012 to 2016. As the results, the average linear density of spraints has a tendency to increase since 2014. That is, the linear densities of spraints have increased at the area II and IV where the reclaiming works have been progressed, although have decreased or unchanged in the areas Ⅰ, Ⅱ and Ⅴ where small scaled construction works have been progressed. Based on the fact that there were habitats at the Honamdo in the area II and the Yeondo in the area IV, otters seemed to restore their activities around the habitats as the center regardless of the reclaiming works.