Natural uranium-contaminated soil in Korea Atomic Energy Research Institute (KAERI) was generated by decommissioning of the natural uranium conversion facility in 2010. Some of the contaminated soil was expected to be clearance level, however the disposal cost burden is increasing because it is not classified in advance. In this study, pre-classification method is presented according to the ratio of naturally occurring radioactive material (NORM) and contaminated uranium in the soil. To verify the validity of the method, the verification of the uranium radioactivity concentration estimation method through γ-ray analysis results corrected by self-absorption using MCNP6.2, and the validity of the pre-classification method according to the net peak area ratio were evaluated. Estimating concentration for 238U and 235U with γ-ray analysis using HPGe (GC3018) and MCNP6.2 was verified by 􀟙-spectrometry. The analysis results of different methods were within the deviation range. Clearance screening factors (CSFs) were derived through MCNP6.2, and net peak area ratio were calculated at 295.21 keV, 351.92 keV(214Pb), 609.31 keV, 1120.28 keV, 1764.49 keV(214Bi) of to the 92.59 keV. CSFs for contaminated soil and natural soil were compared with U/Pb ratio. CSFs and radioactivity concentrations were measured, and the deviation from the 60 minute measurement results was compared in natural soil. Pre-classification is possible using by CSFs measured for more than 5 minutes to the average concentration of 214Pb or 214Bi in contaminated soil. In this study, the pre-classification method of clearance determination in contaminated soil was evaluated, and it was relatively accurate in a shorter measurement time than the method using the concentrations. This method is expected to be used as a simple pre-classification method through additional research.

산불이 발생하면 수목은 산불의 직접 영향을 받는 1차 피해와 시간이 경과하면서 다양한 원인으로 고사하는 2차 피해를 입는다. 산불 발생 후 피해지 조사 시점에 따라서 산불 피해지의 분포 패턴이 달라지고 2차 피해 현상이 진행하는 과정도 지역마다 다르게 나타난다. 이 연구는 산불발생 후 산불피해지의 변화를 분석하는 방법을 제안하는 것이 목적이다. 이 연구에서 제안하는 방법은 시계열 군집 분석을 통해서 비슷한 피해 변화 양상을 보이는 산불 피해지를 구분할 수 있다. 2022년 3월 4일부터 3월 13일까지 산불이 진행한 울진･삼척 지역을 대상으로 산불 피해지를 분석하였다. 9개의 군집으로 분류한 결과를 보면, 세 개의 군집이 다양한 산불 피해지 변화 양상을 보여주고 있다. 이 연구에서는 각 군집의 지도화로 공간 분포 특성을 보여준다. 산불 피해지가 집중되어 있는 지역, 시기적으로 특정 시기에 산불이 발생한 지역 등에서 각 군집이 분포하는 것을 확인할 수 있다.

IEC 60079-10-1 edition 2.0, the global standard for hazardous area classification, was newly revised in 2015. There are many differences compared to the previous edition 1.0 version, first released in 2008, so it has caused confusion in the industry. In case of edition 1.0, the hazardous area extent can be derived through the mathematical formula, but in case of edition 2.0, there was the problem that the exact hazardous area extent was not known because of the mathematical formula of the plot for applying the hazardous area extent was not presented. In this study, we converted the plot introduced in edition 2.0 to CAD format and derived the plot as the mathematical equations. Through this, we suggest the hazardous area extent formula of three states (heavy gas, diffusive, jet). As the IEC committee did not provide the mathematical formula of the hazardous area extent according to the release characteristic, it is impossible to apply the exact hazardous area extent. In this study, a mathematical approach was derived for the plot introduced in edition 2.0, which can reduce the confusion of the applying hazardous area extent.

식물사회네트워크란 식물사회를 이해하기 위한 기존의 식물사회학적 방법과 사회과학에서 최근에 주목받고 있는 사회연결 망 분석 방법을 접목하여 식물사회연결망을 시각화하고 분석하는 것을 말한다. 구축 및 분석 과정은 조사구 설정 및 출현 수종 조사, 종간결합분석, 소시오그램 작성, 네트워크 구조 및 중심성 분석 순으로 진행된다. 식물사회네트워크를 구축하기 위해 본 연구는 해안식생과 내륙식생을 동시에 볼 수 있는 부산광역시를 중심으로 다양한 상관우점식생이 포함되도록 708개 조사구를 설치하여 출현 수종을 조사하였다. 조사 결과, 출현한 수종은 모두 195종이었으며, 상록수 42종, 낙엽수 151종, 반상록수 2종으로 나탔으며, 전체 출현수종을 중심으로 종간결합분석을 실시하였다. 종간결합 분석 결과, 친화종수는 사스레피 나무(47종), 마삭줄(46종), 감태나무(44종), 팥배나무(44종), 광나무(41종) 순으로 나타났으며, 이를 바탕으로 gephi 0.9.2. program을 활용하여 소시오그램을 작성하였다. 작성된 소시오그램은 해안에서 주로 출현하는 그룹과 그렇지 않은 그룹으로 나뉘어져 있어 부산광역시 산림식생의 지리적 분포특성을 반영하고 있었다. 네트워크 구조를 분석한 결과, 1,709개의 연결선 (link)이 나타났고, 한 수종과 종간결합을 갖는 종수의 평균은 약 17.5개였다. 밀도는 0.09, 지름은 5, 평균 경로거리는 2.268로 분석되었는데, 사회과학분야의 네트워크 특성과 정밀한 비교 분석을 위해 앞으로 다양한 식물사회네트워크 구축이 진행되어야 할 것으로 판단되었다. 부산광역시 식물사회네트워크에서는 사스레피나무, 감태나무, 광나무, 마삭줄 등이 중심성 이 높은 것으로 나타났다.

가뭄은 일반적으로 장기간에 걸쳐 물 공급이 부족하여 나타나는 환경 재앙 중 하나로 대부분 넓은 지역에 걸쳐 나타난다. 원격탐사 자료는 이러한 넓은 지역에서 나타나는 가뭄 모니터링에 적합한 방법이다. 따라서 이 연구에서는 강원도 소양호 지역의 Landsat 위성 영상 자료를 활용하여 약 30년(1985-2015) 동안의 소양호 면적을 산출하고 이를 가뭄 패턴과 분석하였다. 특히 ISODATA, Maximum likelihood 및 인공신경망을 활용하여 Landsat 영상을 분류하여 소양호 면적을 산출하였다. 또한 가뭄 패턴을 분석하기 위하여 산출된 호수 면적과 소양호 지역의 강수량을 활용한 표준 강수지수(Standardized Precipitation Index: SPI)와의 상관관계를 분석하였다. 영상 분류 연구 결과, ISODATA, Maximum likelihood 및 인공신경망 방법 중에서 호수 면적 산출의 최적의 방법은 인공신경망 방법임을 알 수 있었다. 또한, 인공신경망 방법을 적용하여 산출한 호수 면적과 SPI와의 상관관계 분석 결과 R 2 값이 0.52를 가진다. 즉, SPI 지수가 낮을 때 호수 면적이 감소하는 것을 알 수 있었다. 즉 호수 면적 변화를 통하여 소양호 지역의 가뭄 상태 감지 및 모니터링이 가능하다는 것을 알 수 있었다. 이 연구는 향후 지역 가뭄 모니터링 프로그램 개발 등에 사용이 가능할 것이다.

In this study, the grid field olfactory odor method was supplemented to the domestic situation in the surrounding areas of a domestic science industrial complex. The actual condition of the occurrence of odor frequency in the field was then investigated over the first period of late spring to summer and the second period of autumn in 2017. The frequency of odor occurrence in the area around the science industrial complex was increased as odor discharge facilities in the nearby area were concentrated. The odor occurrence frequency of the total period was 0.09~0.28, that of the first period was 0.08~0.32, and that of the second period was 0.05~0.25. The odor occurrence frequency in summer was higher than in autumn. The frequency by which the measurement of odor occurrence by smell type was most dominant was mainly smell of chemicals, plastics, and livestock houses during the first period, and the smell of chemicals, burning gases, and plastics during the second period. And the frequency of each smell type was judged to be different according to season. The odor occurrence frequency was measured as higher than 0.15, which is the standard of Germany's odor frequency in an industrial area, and it was judged that measures for odor management in the region were necessary. Since most of the odor discharge facilities are non-continuous systems and the odor generation frequency is more important than the concentration of the minimum detection concentration, it was judged that the German grid method can reflect the odor occurrence characteristics of the odor complaints or receptors for a certain period of time compared to the domestic measurement method. In the future, it was judged that the field olfactory odor method would be able to replace the evaluation method of odor assessment in Korea with the survey method of odor assessment under actual conditions in areas where it is difficult to access the odor discharge source or the receptor where odor complaints occur.

High surface carbon aerogels with hierarchical and tunable pore structure were prepared using ionic liquid as carbon precursor via a simple salt templating method. The as-prepared carbon aerogels were characterized by nitrogen sorption measurement and scanning electron microscopy. Through instant visual observation experiments, it was found that salt eutectics not only serve as solvents, porogens, and templates, but also play an important role of foaming agents in the preparation of carbon aerogels. When the pyrolyzing temperature rises from 800 to 1000°C, the higher temperature deepens the carbonization reaction further to form a nanoporous interconnected fractal structure and increase the contribution of super-micropores and small mesopores and improve the specific surface area and pore volume, while having few effects on the macropores. As the mass ratio of ionic liquid to salt eutectics drops from 55% to 15%, that is, the content of salt eutectics increases, the salt eutectics gradually aggregate from ion pairs, to clusters with minimal free energy, and finally to a continuous salt phase, leading to the formation of micropores, uniform mesopores, and macropores, respectively; these processes cause BET specific surface area initially to increase but subsequently to decrease. With the mass ratio of ionic liquids to salts at 35% and carbonization temperature at 900°C, the specific surface area of the resultant carbon aerogels reached 2309 m2 g–1. By controlling the carbonization temperature and mass ratio of the raw materials, the hierarchically porous architecture of carbon aerogels can be tuned; this advantage will promote their use in the fields of electrodes and adsorption.

OBJECTIVES : The objective of this research is to determine the integrity of pavement structures for areas where voids exist. Furthermore, we conducted the study of voided-area analysis and remaining life prediction for pavement structures using finite element method. METHODS : To determine the remaining life of the existing voided areas under asphalt concrete pavements, field and falling weight deflectometer (FWD) tests were conducted. Comparison methods were used to have better accuracy in the finite element method (FEM) analysis compared to the measured surface displacements due to the loaded trucks. In addition, the modeled FEM used in this study was compared with well-known software programs. RESULTS : The results show that a good agreement on the analyzed and measured displacements can be obtained through comparisons of the surface displacement due to loaded trucks. Furthermore, the modeled FEM program was compared with the available pavement-structure software programs, resulting in the same values of tensile strains in terms of the thickness of asphalt concrete layers. CONCLUSIONS: The study, which is related to voided-area analysis and remaining life prediction using FEM for pavement structures, was successfully conducted based on the comparison between our methods and the sinkhole grade used in Japan.

Currently the forest area is 6,370,000 hectare (ha) which occupies 63.7% in Korea. The forest has good functions such as production of forest products, conservation of national land, prevention of disasters, etc. However constructing houses near the forest area make bad situation like illegal waste incineration by resident. So research subject is forest fire caused by waste incineration place including facility. And this study was conducted about statistical analysis and research analysis of the 100 waste incineration places including facilities at the country town. Statistical analysis shows that March is 27% which percentage is the highest number of forest fire in 10 years’ average. The number of forest fire caused by waste incineration is 45 which is the third highest number in the fire statistic. The distance between waste incineration place including facility and forest area is 30m, 40m and 50m. That 40m (36%) is the most common distance from forest area. The types of waste incineration are ground (62%), the temporary facility made with oil drum can (35%) and other made with steel sheet, concrete, etc. The result of this study is that government and local government must conduct the improvement measure to reduce illegal incineration such as waste pickup area made with rain and wind proof type installed near residence, expenses for waste treatment, enlightenment and training, etc. Also considering their age and income are needed for realistic improvement.

The paper suggests a new method of collision avoidance stemming from the concept of the polygonal target ship domain. Since the last century, we have witnessed the current typical ship domains classified and described. In this proposition, firstly, the domain is a geometrical manner which is used in both analytical and statistical method, resulting in the signification of practical application and simulation. Secondly, such domain will be applied to target ship under the combination of two separated parts: “Blocking area” and “Action area” in order to define the area where the ship must keep outside and how the actions to avoid collision can be generated. Thirdly, the concept has suggested the number of mathematical models for different approaching encounters, including head-on, overtaking and crossing situation. Finally, the parameters of turning circle of the ship can be proposed in determining the size of the domain. Statistical evidences indicate that this method reflects a crew’s real habit and psychological in maneuvering. As the result, simple domain is shaped like imagination of sailors, but more accurate in calculating boundary. It promises an effective solution for automatic collision avoidance method. The next researches of this paper have achieved positive results in finding shortest route for avoiding collision. Moreover, while using statistical methods, classical researches face a serious problem in a wide application with different areas, this concept can make up a beneficial solution for the popular application. The numerous ship domains which are in previous researches will be carried out to compare and point out the simplification and effectiveness of the new method in practice.

본 연구에서는 Navier-Stokes solver에 기초한 TWOPM-3D와 자유수면을 효과적으로 추적할 수 있는 VOF법을 결합한 수치해석법으로 연안역의 육상 교량에 작용하는 고립파에 의한 지진해일파력을 수치적으로 검토하였으며, 연직벽체와 연직주상구조물에 작용하는 단파파력에 관한 기존의 실험치와 비교·검토하여 본 수치해석의 타당성을 검증하였다. 실제로 피해를 입은 교량에 대해 지진해일파고의 변화에 따른 파력의 특성을 수치실험을 통하여 조사하였으며, 육상 교량에 작용하는 지진해일파력의 추정에 항력 성분만을 고려한 Morison식으로부터 얻어진 항력계수의 결과와 설계기준과의 비교로부터 본 3차원 수치해석의 유용성을 논의하였다. 또한, 지진해일파력을 보다 고정도로 추정할 수 있는 합리적인 방법으로 항력과 관성력을 동시에 고려한 Morison식의 적용을 제안하였다.

Self-assembled monolayers(SAM) of microspheres such as silica and polystyrene(PS) beads have found widespread application in photonic crystals, sensors, and lithographic masks or templates. From a practical viewpoint, setting up a highthroughput process to form a SAM over large areas in a controllable manner is a key challenging issue. Various methods have been suggested including drop casting, spin coating, Langmuir Blodgett, and convective self-assembly(CSA) techniques. Among these, the CSA method has recently attracted attention due to its potential scalability to an automated high-throughput process. By controlling various parameters, this process can be precisely tuned to achieve well-ordered arrays of microspheres. In this study, using a restricted meniscus CSA method, we systematically investigate the effect of the processing parameters on the formation of large area self-assembled monolayers of PS beads. A way to provide hydrophilicity, a prerequisite for a CSA, to the surface of a hydrophobic photoresist layer, is presented in order to apply the SAM of the PS beads as a mask for photonic nanojet lithography.

국내 상수원을 대상으로 시행하고 있는 조류경보제는 남조류 발생 현황을 취 정수장 등 물관리 기관에 전파하여 대응조치를 유도하는 제도로 신속하고 정확한 남조류 계수를 필요로 한다. 따라서 조류경보제 발령 기준 대상 남조류인 Anabaena, Aphanizomenon, Microcystis, Oscillatoria 속의 군체 크기와 세포수의 상관관계를 조사하고 회귀식을 도출하여 군체 크기로 세포수를 계산할 수 있는 방법을 알아보고자 하였다. 2013년 8월부터 10월까지 남조류가 과다증식한 시기에 한강(팔당호), 낙동강(달성보, 창녕함안보) 및 금강(고복저수지)의 대표지점에서 남조류 시료를 채집하였으며, 조류경보제 발령 기준 대상 남조류 속의 종별 군체 크기와 세포수의 상관 관계를 조사하여 종 및 속별 회귀식을 산정하였다. 남조류의 속별 상관분석 결과는 사상형인 Anabaena와 Aphanizomenon의 r2값이 0.93 이상으로 높은 상관성을 보였으며 구형의 Microcystis는 0.76의 상관계수 값을 나타냈다. 종 별 상관분석 결과 사상형 남조류 Anabaena crassa, Aphanizomenon flos-aquae, A. issatschenkoi, Oscillatoria curviceps, O. mougeotii는 r2값이 0.89~0.96의 범위로 높은 상관성을 나타냈으며, 구형인 Microcystis aeruginosa, M. wessenbergii, M. viridis는 0.76~0.88의 상관계수 값을 나타냈다. 다른 속에 비해 상대적으로 Microcystis의 상관성이 낮게 나타난 이유는 동일한 종, 동일한 크기의 군체라도 Microcystis strain에 따라 점액질 내의 세포 밀집 정도와 세포 크기에 차이가 있기 때문이다. 본 연구 결과 도출한 회귀식을 이용하여 군체 크기 측정값을 세포수로 환산하는 방법이 기존의 세포 계수법과 비교할 때 신속하고 간편할 것으로 보인다. 향후 남조류 종별 더 정확한 회귀식을 도출하기 위해서는 많은 시료수 확보와 더불어 다른 종들에 대한 조사 연구가 진행되어야 할 것이다.

Condition of Construction Safety Training and its Vitalization in Chungbuk Area. The industrial accident rate of Korea has been declining each year but this does not necessarily mean that the safety consciousness of people has been strengthened. 94.3% of the overall industrial accidents occur in small/medium sized business (299 employees or less) and 97.5% of the accidents are in construction business. In Chungbuk area, small/medium sized business take up 99% of overall business and among them, 30% are construction business. Therefore, in order to resolve the safety issues, survey and research have been conducted with construction workers and manager and identified the causes and possible solution for improvement as following. First, most of the site workers and managers view safety training and equipment unnecessary as the work site is small in size. Second, the current safety trainings are being done with case study and visual teaching materials but the quality of the material, environment and instructors are very low and outdated. The quality of study materials and instructor need to be improved with professionalism. Third, 57% of surveyees think that the contents of training materials do not reflect the real situations and hazards at the work site and are not even in line with legal requirements. The safety trainings are being given perfunctorily. With on above researched issues, new method for vitalization of safety trainings and reducing and preventing the industrial accidents constructional site in Chungbuk area are to be suggested.