This study explored a method to enhance the drying process usability of local mangoes by producing foam-mat dried powder under varying drying temperatures (50, 60, 70°C) and foam thicknesses (3, 6, 9 mm). The drying process period ranged from 60 to 390 minutes based on the set conditions, with higher temperatures and thinner foams accelerating drying. Powder chromaticity (L*, a*, and b*) demonstrated a declining trend with increasing drying temperature and foam thickness, exhibiting notable variance in chroma values. The water absorption index varied significantly, between 3.08 to 4.24, under different drying conditions, although the water solubility index remained consistent across foam-dried samples. Powder moisture content ranged from 2.53% to 3.83%, with hygroscopicity escalating with temperature and foam thickness. Vitamin C structure was compromised during the hot air drying process, especially at temperatures above 60°C. Electronic nose analysis distinguished foam-dried powder from freeze-dried powder; however, a thicker foam yielded a scent profile closer to that of freeze-dried powder. The findings provide fundamental data on mango foam drying, which is expected to improve processing and storage tech for local mangoes.

This study investigated the quality characteristics and antioxidant activities of salad dressing prepared with Jerusalem artichoke powder (0%, 4%, 8%, and 12%). The pH, soluble solid content, and viscosity increased as the content of Jerusalem artichoke powder increased. The titratable acidity showed no significant differences between samples. The lightness values decreased, while the redness and yellowness values increased with increasing amounts of Jerusalem artichoke powder. The total polyphenol content ranged from 52.00-69.64 μg GAE/g, and increased with the increase in Jerusalem artichoke powder levels. The antioxidant activities measured via DPPH and ABTS radical scavenging activity and reducing power also increased with increasing Jerusalem artichoke powder, at a higher rate than in the control. These results suggest that it is beneficial to add Jerusalem artichoke powder when in salad dressing.

This study investigated the quality characteristics of convenient chicken porridge prepared with fresh ginseng powder (FGP). The porridge made with the addition of FGP showed significantly higher or similar pH at 5.99-6.13 compared to porridge made without adding FGP. The convenient chicken porridge with FGP had lower viscosity and higher spreadability than the control group (p<0.05). This porridge exhibited higher lightness (L) and yellowness (b) values but a lower redness (a) value than the control group (p<0.05). The porridge made with the addition of 0.4% blanched FGP (BG0.4) displayed higher total polyphenol content, 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) radical scavenging activities than the other types of chicken porridge (all p<0.05). The porridge with the addition of FGP showed weaker “rice grain size”, “glossiness”, “appearance cohesiveness”, “cooked rice aroma”, “sweet taste”, “texture cohesiveness”, “thickness”, and “stickiness” than the control group (all p<0.05). The appearance and flavor acceptance were significantly higher or similar for the porridge samples made with the addition of 0.2% non-blanched FGP (NBG0.2) and 0.4% non-blanched FGP (NBG0.4) when compared with those of the control group.

We determined physicochemical characteristics and antioxidant activities of cookies prepared by replacing wheat flour with 0, 3, 6, and 9% freeze-dried burdock powder instead of wheat flour. The leavening and loss rates of the cookies decreased in proportion to the amount of burdock powder added to the dough. The moisture content of the cookies increased in proportion to the amount of burdock powder added and the crude protein and hardness were higher in the burdock-added group compared to the control. The lightness and yellowness of the cookies decreased, and the redness increased in proportion to the amount of burdock powder added. The total flavonoid and polyphenol compounds in the cookies increased in proportion to the amounts of burdock powder added. The antioxidant activities also tended to increase in proportion to the amount of burdock powder added. Based on the above results, adding burdock powder to cookies can increase antioxidant activity by increasing the content of antioxidant components, such as polyphenols and flavonoids. In addition, it is believed that adding burdock powder at levels of 3 to 9% of the weight of flour would result in cookies with spreadability, swelling power, and hardness similar to those of regular cookies.

To develop quality-improved bakery products, the influence of the partial replacement of wheat flour by Artemisia princeps leaf powder (APP) on the quality characteristics of cookies, including antioxidant activities, was investigated. Studies were carried out to evaluate the addition of different percentages of APP on the quality characteristics of cookies prepared by incorporating APP (1-4%) into wheat flour. The incorporation of APP significantly affected the cookies’ physicochemical parameters and sensory acceptance attributes. Such incorporation at different levels significantly reduced moisture content while increasing the cookie dough’s density (p<0.05). The spread ratio, loss rate, L*, and b* values of the cookies decreased, but their hardness and a* value increased significantly with increasing levels of APP substitution (p<0.05). 2,2-Diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-bis-3-ethylbenzthiazoline- 6-sulphonic acid (ABTS) radical scavenging activities were significantly increased (p<0.05) with higher APP substitution and were well-correlated. Hedonic sensory results showed that cookies fortified with 2% APP generally received satisfactory and acceptable acceptance scores. Consumers seemed to prefer the cookie texture in terms of chewiness when the samples were softer and lighter but less reddish, whereas taste acceptance may be a dominant factor in overall acceptability.

Radioactive liquid waste generated during the operation of domestic nuclear power plants is treated through a somewhat different liquid radwaste system (LRS) for each plant. Prior to the introduction of standard nuclear power plants, LRS used a concentrated water dry system (CWDS) to evaporate liquid waste and manage it in the form of dry powder. The boron-containing radioactive liquid waste dry powder was solidified using paraffin from 1995 to 2010, and about 3,650 drums (based on 200 L) of paraffin solidified drums are currently stored in nuclear power plants. Paraffin solidification drums do not meet the acceptance criteria for radioactive waste repositories because it is difficult to secure the homogeneity of the solidified body and there are concerns about leaching of radioactive waste due to the low melting point of paraffin. In order to solve this problem and safely permanently dispose of paraffin solidification drums, the characteristics of dry powder paraffin solidification drums containing boron-containing radioactive liquid waste must be analyzed and appropriate treatment technology utilizing the results must be introduced. This study analyzes the physical properties of paraffin, the chemical properties of boron-containing radioactive waste dry powder, and the physicochemical properties of paraffin solidification powder, and proposes an appropriate alternative technology for treating boron-containing radioactive waste dry drum. When disposing of the paraffin solidification drum with boron-containing radioactive liquid waste dry powder, the solidification body must be effectively withdrawn from the drum and the paraffin must be completely separated from the solidification body. When disposing the drum, the solidified material must be effectively extracted from the drum and the paraffin must be completely separated from the solidified material. Afterwards, the paraffin must be self-disposed, and the radioactive waste must be disposed of in accordance with acceptance criteria of repository. We looked at how each characteristic of the paraffin solidification drum with boron-containing radioactive liquid waste dry powder can be utilized in each of the above treatment processes.

This study aimed to investigate the effects of Centella asiatica powder on the quality characteristics and storage stability of goat meat Tteokgalbi. The goat meat Tteokgalbi samples were prepared with four different quantities (0, 0.5, 1, and 1.5%) of Centella asiatica powder. The moisture content of the samples containing Centella asiatica powder was significantly lower than that of the control (p<0.05). The protein content of the samples containing Centella asiatica powder was significantly higher than that of the control (p<0.05). As the proportion of Centella asiatica powder increased, the pH, L*, and a* values of the uncooked and cooked samples decreased (p<0.05). The water holding capacity and the cooking yield of the uncooked and cooked samples were higher in the samples containing Centella asiatica powder than in the control (p<0.05). Also, with the increasing amounts of the Centella asiatica powder, the thiobarbituric acid reactive substance (TBARS) levels decreased. The 1-1.5% Centella asiatica powder group showed lower levels of volatile basic nitrogen (VBN) than the other groups as per the assay (p<0.05). The results indicate that Centella asiatica powder could enhance the quality characteristics and storage stability of goat meat Tteokgabi.

강황 분말의 첨가가 마요네즈의 품질특성, 항산화활성 및 산화안정성에 미치는 영향에 대해 평가하였다. 들기름으로 제조된 마요네즈에 강황 분말을 0.5%, 1%, 2%, 3% 농도로 첨가하여 4°C에서 12주 동안 저장하였으며, 강황 분말 무첨가구와 비교하였다. 강황 분말 첨가량이 많아짐에 따라 들기름 마요네즈의 L* (명도) 값은 유의적으로 감소하였고, a* (적색도)는 모든 실험구에서 negative (-)값이었으며, b* (황색도)값은 유의적으로 증가되는 경향이었다(p<0.05). 강황 분말 첨가량이 많아짐에 따라 총 페놀 함량 및 항산화 활성이 유의적으로 증가하였다(p<0.05). 마요네즈를 저장하는 동안 과산화물가는 유의적으로 증가하였으나, 강황 분말 첨가 시료에서는 유의적으로 낮았다(p<0.05). 마요네즈의 유화안정성은 저장 초기에 비해 저장 기간이 길어질수록 감소되는 경향이었으나, 0.5%의 강황 분말 첨가구는 무첨가구에 비해 유의적으로 높은 유화안정성을 보였으며, 1%의 강황 분말 첨가구는 무첨가구와 유의차를 보이지 않았다. 점도는 저장 기간이 경과됨에 따라 감소되었으나, 무첨가구에 비해 1% 이상의 강황 분말 첨가구에서 유의적으로 높았다. 들기름 마요네즈에 강황 분말 첨가 시 항산화 활성 증대 및 과산화물의 생성 억제에 효과적이었으며, 특히 0.5~1% 첨가시 마요네즈의 유화안정성 및 점도 개선에 도움이 될 것으로 판단된다.

Thermite welding is an exceptional process that does not require additional energy supplies, resulting in welded joints that exhibit mechanical properties and conductivity equivalent to those of the parent materials. The global adoption of thermite welding is growing across various industries. However, in Korea, limited research is being conducted on the core technology of thermite welding. Currently, domestic production of thermite powder in Korea involves recycling copper oxide (CuO). Unfortunately, controlling the particle size of waste CuO poses challenges, leading to the unwanted formation of pores and cracks during thermite welding. In this study, we investigate the influence of powder particle size on thermite welding in the production of Cu-thermite powder using waste CuO. We conduct the ball milling process for 0.5–24 h using recycled CuO. The evolution of the powder shape and size is analyzed using particle size analysis and scanning electron microscopy (SEM). Furthermore, we examine the thermal reaction characteristics through differential scanning calorimetry. Additionally, the microstructures of the welded samples are observed using optical microscopy and SEM to evaluate the impact of powder particle size on weldability. Lastly, hardness measurements are performed to assess the strengths of the welded materials.

Black Soldier Fly Larvae (Hermetia illucens, BSFL) is an environmental purification insect utilized as an animal feed source due to its high protein content. BSFL need to be dried to preserve quality, and the optimal drying method should be cost-effective. In this study, various drying methods (hot air (HD), freeze (FD), vacuum (VD), and combined-drying (CD)) were applied to BSFL, and then BSFL powders were characterized. Crude protein content was highest in HD and lowest in CD, and there was no significant difference in crude fat content (p>0.05). In the measurement of the total amino acid content of BSFL, glutamic acid and aspartic acid were the highest regardless of the drying method. The total amino acid content was the highest in HD and the lowest in CD. Total polyphenol content was higher in VD and FD than in HD and CD. Also, hydrogen peroxide and DPPH radical scavenging showed similar results. In the antioxidant measurement results, VD and FD showed higher antioxidant capacity, but considering cost-effectiveness, HD was the most available method for drying BSFL.

Looking at the dietary patterns of women in their 20s and 30s as well as postmenopausal women, the intake of most nutrients was lower than the recommended levels. Shrimp is a low-calorie, high-protein food, and contains abundant minerals, and it is expected to help prevent osteoporosis. In this study, jinmal dasik was prepared by varying the shrimp content at 0, 1, 5, and 7%, and the quality characteristics were measured. Hardness, adhesion, chewiness, and cohesiveness of physical properties increased significantly as the amount added increased (p<0.001). The springiness decreased significantly as the amount of addition increased in the addition group (p<0.001). In the calcium, there was a significant increase as the amount added increased (p<0.001). In the potassium, there was a significant increase as the amount added increased (p=0.049). This study intends to highlight the benefits and possible uses of shrimp.

This study investigated the quality characteristics and antioxidant effects of rice cookies containing different percentage of freeze-dried plum powder (3%, 5%, 6%, and 12%). The density of the dough and the thickness of the rice cookies from the control group and the additive group were not significantly different. The pH value of the dough, its moisture content and spread factor, as well as the Hunter’s L and b values of the rice cookies significantly decreased as the amount of dried plum powder added increased. However, the sweetness, hardness, thickness, Hunter’s a value, total polyphenol, total flavonoid and anthocyanin contents, DPPH and ABTS free radials scavenging activity, and ferric reducing antioxidant power of the rice cookies significantly increased as the amount of dried plum powder added increased. Overall, the results of this study showed that adding dried plum power enhanced the antioxidant activities and quality characteristics of rice cookies.

The purpose of this study was to investigate the antioxidant activities, quality characteristics, and storage stability of perilla oil mayonnaise (PM) with different levels of onion powder (OP) from 0 to 3%. As the amount of OP increased, the L, a, and b values increased, but pH decreased (p<0.05). The addition of OP raised viscosity (p<0.05). The addition of OP to PM proportionally increased the total phenolic content, and antioxidant activities as measured by DPPH and ABTS radical scavenging activity, and FRAP assay. When compared to PM without OP, PM that contained OP had a peroxide value that was almost 1.94 times lower. The emulsion stability was between 97.62 to 94.92% in the PM without OP and PM with OP groups was 99.60% for 12 weeks. This study showed that the inclusion of OP in PM has the potential to inprove its quality, antioxidant activities, and storage stability.

본 연구에서는 실버 파우더의 입자 크기, 즉 평균 입자 크기가 2㎛과 7㎛, 이렇게 2가지 실버 페이스트를 개발하였다. 이렇게 개 발된 실버 페이스트에 대해서 점도 및 점탄성, 경화후에 잔류용제 유무 확인을 위한 TGA측정, Strain에 따른 저항 변화 및 전극 표면 구조 변화에 대해서 검토하였다. 이러한 결과를 정리하면 Strain에 따른 저항 변화를 최소화하기 위해서는 실버 파우더의 입 자를 2㎛정도인 것이 가장 바람직함을 알 수 있었다.

In nuclear power plant, there were many contaminated tanks dispose of radioactive fluid waste. These tanks are made of stainless-steel, and corrosion can occur when tanks are exposed to radioactive fluid waste containing moisture for a long time. Therefore, those sludge waste including radionuclide should be collected, solidified, and disposed of. If sludge can be melted, sludge can be easily solidified. However, melting points of sludge components (Fe2O3, NiO, Cr2O3) are very high as 1565, 1955, and 2435 , respectively. Therefore, melting sludge is difficult. If a solidification auxiliary material such as cement or asphalt is used to help solidify, solidification can easily occur, but cement and asphalt are vulnerable to heat. Vitrification using glass material can be solidification method, but the waste loading ratio of glass material is higher than 50%. High waste loading ratio is weakness in terms of volume reduction of waste. In this study, ferro frit powder (Na2O, K2O, CaO, Al2O3, B2O3, SiO2, ZnO) is used as solidification auxiliary material. When ferro frit powder mixed with sludge material are melted in sludge material, melted ferro frit powder can stick sludge material and can solidify sludge material without melting. Sludge can be solidified by using ferro frit powder with a smaller waste loading ratio than the vitrification method. However, since the waste loading ratio of the solidification auxiliary material is small, if ferro frit powder is not uniformly distributed between sludge powder, solidification may not be performed properly. Although the mixing ratio between sludge and ferro frit in solidified sludge is same, when the distribution of ferro frit powder in sludge is non-homogeneous, the difference in chemical and physical characteristics as compressive strength and leaching resistance can be observed in solidified sludge. As the ferro frit mixing ratio in the site where ferro frit exists was relatively high, the melting point of the mixed powder (sludge+ferro frit) decreased, and the mixed powder could not maintain its shape and melted. In the case of the area where ferro frit does not exist, since only the stainless-steel oxide sludge exists, sludge was not melted, and the shape was maintained. However, it was confirmed that the leaching resistance was lowered by visually observing the color change of the leachate within a short period of time (about 2 hours) when solidified sludge was immersed in the leachate.

Coffee is the most popular beverage in the world and various pollutants, including volatile organic compounds (VOCs), are emitted from the coffee manufacturing workplace (roasting process). In this study, we analyzed the characteristics of VOCs emissions from roasted Arabica coffee bean powder using a VOCs emission chamber with a PTR-ToF-MS. The emission test was maintained under constant temperature (20 ± 2oC) and humidity (50 ± 5%) conditions. As a result of the emission test, most of the target compounds had a high concentration in the initial period, and decreased emissions as time lapsed. Acetaldehyde showed the highest concentration and was initially 78 ppm during the test period. Acetaldehyde was followed by propionic acid at 61 ppm, propanal at 51 ppm, and isobutanal at 50 ppm. As a result of comparing the occupational exposure limits (OELs) of individual VOC emitted during the coffee roasting process, the OELs of four substances, including acetaldehyde, propionic acid, acetic acid, and pyridine were identified. Of all four substances, only pyridine exceeded the OELs, and the other compounds had levels of 10% to 30% of the OELs.

The purpose of this study was to investigate the possibility of using air potato (Dioscorea bulbifera) powder to make sponge cakes. The sponge cake batter was made by adding 0, 10, 20, 30, and 40% of air potato powder, and the resultant anti-oxidative properties and quality characteristics were analyzed. The study showed that the height, batter yield, and loss rate of sponge cakes decreased as increasing amounts of air potato powder were added, but the weight, viscosity, moisture content, and specific gravity increased. An evaluation of the color showed that the L and b values were highest in the control group but the a value was highest in the 40% group. There was no significant difference between samples in terms of cohesiveness, although the study showed a significant increase in the hardness, chewiness, and gumminess as the quantity of air potato powder in the sponge cakes increased. The total polyphenol content and DPPH radical scavenging activity increased noticeably as more air potato powder was added to the sponge cakes. The results thus showed that the study groups with the addition of air potato powder showed higher antioxidant activity than the control group.

An increasing trend embracing the 2030 generation mindset through the new word ‘newtro’, which means reinterpreting the past and selling it in the present, has been gaining traction. The 2030 generation who seek new experiences and desserts is growing. The unique dessert market is expected to continue to grow in the future. Thus, this study devised a pine needle madeleine. Madeleines were made by varying the proportions of pine needle powder added to 0%, 1%, 3%, 5%, and 7%, and specific gravity, moisture, color, physical properties, and antioxidant properties were measured. The L-value decreased significantly (p<0.001) as the amount of pine needle powder added increased, and the a-value increased (p<0.001). The total polyphenol content, DPPH, and ABTS gradually increased significantly (p<0.001). Through this study, it was possible to confirm the quality and characteristics of madeleines using pine needle powder, which has excellent antioxidant properties, and it will become basic data for the development of various desserts using pine needle powder.