본 연구는 정수압 처리와 초음파 처리가 20일 숙성기간 동안 돈육의 삼겹살과 목살 부위의 품질특성에 미치는 영향에 대해 조사하였다. 다양한 품질특성을 관찰한 결과 정수압에서 숙성하고 초음파 처리한 돈육은 부위별로 효과의 차이는 있지만, 품질향상에 효과적인 것으로 나타났으며 또한, 초음파 처리했을 때 특히 고기의 연도와 관계가 있는 pH, 보수력, 경도 품질을 높이는 것으로 관찰되었다. 본 연구에서 이용한 저온 정수압 숙성 및 초음파 처리공정은 낮은 온도에서 돈육을 빠른 시간안에 숙성하는데 적용 가능할 것으로 판단된다.
본 연구에서는 해운대 해수욕장의 내습파랑특성과 해빈면적 변화와의 상관성을 파악하였으며, 파랑특성요소를 독립변수로 설정하고 해빈면적 일변화량을 종속변수로 하는 회귀분석을 수행하여 전체 및 세부구간(서측, 중앙, 동측)에 대한 해빈면적 변화량 산출식을 도 출하였다. 도출된 해빈면적 변화량 산출식에 약 10개월의 파랑관측자료를 대입하여 계산된 해빈면적과 실제 관측면적과의 비교를 통해 해빈면적 변화량 산출식의 정확도를 평가하고 해빈면적 변동특성을 분석하였다. 분석 결과, 해빈면적 변화량 산출식의 정확도는 평균 해빈폭 기준 1.5 ~ 2.7 m의 오차를 나타내었으며, 실제 관측면적과의 상관계수는 0.91 ~ 0.94의 분포를 보이며 매우 유사한 해빈면적 변화양상을 나타내었다. 또한, 세부구간별로 해빈면적 변화에 영향을 크게 미치는 파랑특성요소가 서측구간은 파향, 중앙구간은 파고, 동측구간은 파고와 주기인 것을 알 수 있었다. 이를 통해 연안정비사업이 해운대 해수욕장의 해빈면적 변동특성에 미치는 영향 및 연안정비사업의 효과를 파악할 수 있었다. 본 연구에서 도출된 해빈면적 변화량 산출식은 정도 높은 파랑예측자료가 확보될 경우 유의미한 장기간 해빈면적 변화 예측이 가능하므로 연안침식에 대한 선제적 대응 대책 수립 시 의사결정의 근거가 될 수 있는 기초자료 확보에 기여할 수 있을 것으로 기대 된다.
통영 LNG 기지에서 방류되는 냉배수가 진해만에 미치는 영향을 알아보고, 냉배수의 활용 방안 모색을 위해 총 4개의 냉배수 방류량에 대한 진해만의 환경변화를 1년간(2018년) 모의하였다. 실제 냉배수 방류량인 Case1(10 m3 sec-1)의 모의 결과, 모든 분기에서 냉배 수에 의한 진해만의 환경변화는 매우 미미하게 나타났다. 모의 방류량인 Case2(100 m3 sec-1)의 경우 방류구 반경 5 km 범위에서 1 ~ 3℃의 수온 감소를 보였으며, Case3(1000 m3 sec-1)에서는 방류구 반경 8 km 범위에서 최대 4 ~ 5℃의 수온이 감소하였고 진해만 전 해역에 걸쳐 냉 배수가 확산하는 결과를 보였다. 플랑크톤의 성장 속도는 최대 15% 감소하였으며(11월), 대형조류의 성장 속도는 행암만 부근에서 최대 6 % 증가하는 결과를 보였다. 상기 결과로부터 통영 LNG 기지에서 방류되는 냉배수에 의한 진해만의 환경변화는 미미한 것을 확인하였 다. 또한 Case3 결과로부터 국소지역의 ‘적조 방재’, ‘해조류 성장’을 목적으로 냉배수의 활용이 가능할 것으로 기대된다.
The study was conducted to investigate how changes in the internal compliance and stiffness of the blood vessels affect the changes in blood pressure and systolic peak time using the RLC Windkessel Model, a secondary blood vessel model of the brachial artery. For this purpose, each component coefficient for blood pressure waveforms of people before and after surgery and before and after drug treatment was estimated. And the expression time of systolic peak time was measured when the elastic value that can affect the change of the waveform of blood pressure change was changed, and the relationship between elasticity and systolic peak time was derived by regression method. It was confirmed that elasticity was affected by the peak time of systolic period, but it did not affect the size of blood pressure. The study was conducted to determine how inertance affects blood pressure, and blood pressure pulse wave was measured before and after heart transplant, and blood pressure pulse wave was measured before and after medication. R, L, and C components of Windkessel models were estimated in blood pressure waveforms. The factors that affect the increase of blood pressure and the decrease of systolic peak time were due to the increase of L component in the RLC component.
In this study, the effect of thermal grease and heat sink material of cooler on CPU temperature was measured and compared with LinX(v0.9.6) and HWMonitor.When the computer is booted without thermal grease applied, the CPU temperature rises rapidly, and the CPU temperature reaches 100℃ after 60 seconds for aluminum heat sink and 140 seconds for copper heat sink. The CPU temperature is lower as the thermal conductivity coefficient of thermal grease is higher, and the CPU temperature is lower when the thermal conductivity coefficient of the cooler is higher. In addition, when using a thermal grease and a heat sink with a high coefficient of thermal conductivity, the cooler rpm can be lowered, which is considered to be advantageous in terms of system stability and energy saving.
이 연구의 목적은 중세와 르네상스 시기에 제작된 지도에 표시된 오빌의 지리적 위치와 시대별 위치변화를 조사하는 것이다. 이를 위해 각 시기에 제작된 지도를 조사하여, 이를 시대별 그리고 지역별로 분류하여 분석했다. 분석 결과 중세에는 인더스강 서편의 해안지역, 갠지스강 유역, 홍해연안 지역과 홍해상의 섬으로 표시된 것을 확인했다. 그리고 르네상스 시기에는 히스파니올라, 페루, 향료제도와 소팔라로 대상지가 옮겨 갔다. 또한 다시스는 중세에는 카타이 서편에 그려졌으나, 르네상스 시기에는 오빌과 가까운 장소로 이동했다. 그리고 아메리카 원주민에 대한 신학적 해석과 현지인들로부터 수집한 지식 역시 오빌의 위치를 변화시켰다. 1600년 이후에는 오빌은 성경지도를 제외한 지도에서는 완전히 사라진 것 역시 확인했다.
목적 : 소음으로 인한 스트레스가 다양한 시기능에 미치는 영향에 대해 알아보고자 하였다.
방법 : 안과적 질환, 수술이력 및 안구운동에 이상이 없는 젊은 성인 60명(23.12±1.26세)을 대상으로 하였으며 소음에 노출되기 전, 후로 지각된 스트레스 척도, 최대조절력, 조절반응량, 원-근거리 사위량, 비침습적 눈물 막 파괴시간의 변화를 관찰하였다.
결과 : 소음 스트레스에 노출이 된 후에는 지각된 스트레스 척도는 증가하였다. 푸쉬업 및 마이너스렌즈 부가 법으로 측정된 최대조절력과 조절반응량은 감소하였고, NITBUT 역시 감소하였으며, 원-근거리 사위량은 증가하는 경향을 나타내었다.
결론 : 본 연구의 결과를 통해 소음 스트레스는 시기능에 다양한 형태로 영향을 미치고 있다고 볼 수 있으며, 굴절검사 및 시기능 평가 시 주변 환경에 의한 소음 스트레스가 작용하지 않도록 검사실 환경을 구성하는 것이 중요할 것이라 사료된다.
The purpose of this study was to determine the optimal digestible energy levels on pregnancy mares. Physical changes and fecal microorganism in pregnant horse and changes in birth characteristics of neonatal foals were investigated. The experiment was conducted by 18 mares (Jeju corssed bred, older than 36 months) into three treatment groups. The experimental diet consisted of 80%, 100%, 120% digestible energy levels based on NRC. The average daily intake was lower in the 120% (8.75±1.01) than the 100% (9.34±0.92), 80% (9.14±0.88) and there was significant difference (p<0.05). The feed efficiency was lower in the 120% than 80%, 100% (p<0.05). Total cholesterol, HDL-cholesterol, LDL-cholesterol and triglyceride was higher in 120% than others (p<0.05). However there were no health problem and there was no difference between the treatment groups in the birth characteristics of neonatal foals. At the phylum level, Fibrobactres was difference by digestible energy levels, 80% (8.53%) was higher than 100%, 120%. At the genus level, Bacteroides and Kineothrix increased in fecal proportions with increasing digestible energy levels (p<0.05). Fibrobacter showed higher composition at 80% than 100% and 120% (p<0.05).
본 연구는 인디고 염료로 모발에 도포하여 염색효과와 모질 특성 변화를 알아보고자 하였다. 연구방법은 인디고 염료를 중탕하여 사용하였다. 염료를 건강모와 탈색한 시료 모발에 도포 후 열처리와 자연방치 시간을 다르게 하였다. 측정은 시료별로 도포 전과 후를 측정하여 비교 분석하였다. 염색효과를 알기 위해 색차계를 이용하여 L*, a*, b*값과 물 빠짐을 측정하였다. 모질 변화를 알기 위해 인장강도, 메틸렌블루를 이용한 흡광도, 광택을 측정하였다. 결과는 염색효과 측정 결과 모든 시료에서 L*값, a*값, b* 값의 도포 전과 후의 통계분석 결과는 유의미한 결과로 염색 효과가 있었다. 물 빠짐 측정결과는 1일차에는 가장 많이 빠졌고, 3일차부터는 더 이상의 물 빠짐이 없었다. 인장강도 측정결과는 모든 시료의 평균값은 증가하였다. 그러나 통계분석 결과 유의미하지 않은 결과로 모질의 특성 변화는 없었다. 메틸렌블루를 이용한 흡광도 분석결과 건강7L(3)을 제외한 시료에서 통계분석 결과 모질의 특성 변화는 없었다. 광택 측정결과는 통계분석 결과 광택에 변화를 주는 것을 알 수 있었다. 결론은 인디고 염료에 의한 모발 염색효과가 있었고, 모질의 특성 변화는 광택은 있고, 인장강도와 흡광도 변화는 없었다. 차후 다양한 염색 처리 방법 연구와 신뢰성과 객관적 결과를 위한 측정 연구가 필요하다.
Using data from flies collected with pitfall traps in 365 forests on a nationwide scale in Korea, the abundance and distribution changes of two families (Phoridae and Lauxaniidae) in Korean forests were predicted at the genus level according to two climate change scenarios: RCP 4.5 and RCP 8.5. The most suitable temperature for the 17 major genera was estimated using a weighted average regression model. Stichillus and Anevrina displayed the lowest optimum temperature with 7.6℃ and 8.5℃ in annual mean temperature, respectively, whereas Chonocephalus had the highest optimum temperature with 12.1℃. Among thirty genera, seven genera (four from Phoridae and three from Lauxaniidae), which showed their abundance in a bell-type or linear pattern along the temperature gradient, were used for predicting the distribution changes according to the future climate change scenarios. All the taxa of this study are expected to decrease in abundance and distribution as a function of temperature increase. Moreover, cold-adapted taxa were found to be more affected than warmadapted taxa.
As people's living standards and cultural standards have developed, interest in culture and art has increased, and the demand for large space structures where people can enjoy art, music, and sports has increased. As it accommodates a large number of personnel, it is most important to ensure safety of large spatial structures, and can be used as a space where people can evacuate in case of a disaster. Large spatial structures should be prepared for earthquake loads rather than wind loads. In addition to damage to the structure due to earthquakes, there are cases in which it was not utilized as a space for evacuation due to the fall of objects installed on top of the structure. Therefore, in this study, the dome-shaped large spatial structure is generalized and the displacement response according to the number of installations, position and mass is analyzed using a tuned mass damper(TMD) that is representative vibration control device.
In this study, we compare and analyze stress and vertical deflectional displacement according to cross sectional shape changes of the beam using finite element analysis. The 11,000mm long horizontal beam showed stress differences depending on the cross-sectional variation, with stress differences of up to 200MPa and at least 149MPa. The deflection at the end of the beam also differed by up to 586 mm and at least 208mm. The weight change applied according to the cross-sectional shape of the steel horizontal beam was up to 235kgf, at least 144kgf, and showed the best stress and deflection characteristics in the cross sectional shape with a weight of 185kgf. This allowed us to improve structural safety through sectional shape optimization despite the weight increase.
This study analyzed the reproductive biology, fishing characteristics and changes in fishing business of Liparis tanakae, snailfish collected from September to March. It was the period when they were mainly caught from 2018 to 2020. The average length was generally small in September and October and was large in January and February. The average body weight was generally around 1,500 g and the average body weight in autumn was lower and in winter was higher. The sex ratio of male and female was 0.40:0.60 (χ 2 test, p < 0.05). The spawning period was estimated from October to February and the main spawning period was from December to February through the GSI. The egg diameter of matured staged female L. tanakae was 0.11-1.48 mm, which was the main spawning period and the relationship between body weight and fecundity was F = 1849TL0.1093 (r2 = 0.2401). The monthly catch of L. tanakae was high from November to February, the time of migrating to the coastal area. Coastal gillnet fishery showed the highest percentage of all fisheries catching Liparis spp. Liparis spp. were caught at a high rate in winter in Chungnam, Jeonbuk, Jeonnam and Gyeongnam region, and revenue and cost was increased since 2017. Assuming a situation where there is no catch of Liparis spp., the fishing profit that can be obtained was the highest in Gyeongnam region and the dependence on fishing of Liparis spp. by coastal gillnet fishery was high.
담양습지는 하도 내에 발달하는 하천습지로, 국내 처음으로 습지보호구역으로 지정되었으며 유네스코 무등산권 세계지질공원 후보지역으로 알려져 있다. 담양습지 인근은 영산강 상류지역으로 현재는 비교적 넓은 평야지대가 분포한다. 담양습지 주변의 퇴적환경을 해석하고자 시추코어를 획득하였고, 퇴적상, 연대측정(AMS, OSL), 입도분석, 지화학 분석 등을 수행했다. 또한 습지 주변의 기존 시추 코어 자료를 사용하여 종합적인 퇴적환경 변화를 해석했다. 담양습지가 분포하는 영산강 상류 일대의 평야 지역은 후기 플라이스토세 동안 형성된 하안단구 퇴적층이 비교적 하도와 먼 지역에 분포하고 있다. 홀로세 퇴적층은 자갈층이 평야 일대에 걸쳐 넓게 분포하고 있어 홀로세 중기 이후 해수면이 안정화 된 다음에 망상하천의 형태로 퇴적된 것으로 해석했다. 그리고 현재와 같은 사행하천으로 전이되면서 주로 모래가 우세한 퇴적물이 유입되었으며, 하도 주변으로는 범람원 환경이 조성되었다. 또한 화분분석 결과를 근거로 약 6천년 전 후에는 온난 습윤한 환경이었으며 이후 습지 퇴적층이 발달한 것으로 추정했다. 담양습지가 분포하는 하도 일대의 트렌치 조사 결과 하부에는 원마도가 좋은 자갈층이 분포하고 있으며, 자갈층 상부를 모래층이 덮고 있다. 담양습지는 1970년대 담양호가 건설된 이후 모래층 상부에 머드층이 퇴적되면서 형성된 것으로 추정된다.
The change in the open porosity of bulk graphite as a function of the uniaxial molding pressure during manufacturing is studied using artificial graphite powder. Subsequently, the graphite is impregnated to determine the effect of the open porosity on the impregnation efficiency and to improve the density of the final bulk graphite. Bulk graphite is manufactured with different uniaxial molding pressures after mixing graphite powder, which is the by-product of processing the final graphite products and phenolic resin. The bulk density and open porosity are measured using the Archimedes method. The bulk density and open porosity of bulk graphite increase as the molding pressure increases. The open porosity of molded bulk graphite is 25.35% at 30 MPa and 29.84% at 300 MPa. It is confirmed that the impregnation efficiency increases when the impregnation process is performed on a specimen with large open porosity. In this study, the bulk density of bulk graphite molded at 300 MPa is 11.06% higher than that before impregnation, which is the highest reported increase. Therefore, it is expected that the higher the uniaxial pressure, the higher the density of bulk graphite.
We aimed to predict the Italian ryegrass (IRG) productivity change of introduced and domestic varieties based on climate factors and identify suitable areas for IRG cultivation using the RCP 8.5 scenario. The minimum mean air temperature in January showed the highest correlation with productivity. The ratio of possible and low productivity areas was high in Gangwondo, and the ratio of suitable and best suitable areas was relatively high in the central and southern regions in the past 30 years. The change in the IRG cultivation area was found to be 26.9% in the best suitable area between 1981–2010 but increased significantly to 88.9% between 2090s. In the IRG suitability comparison classes between domestic and introduced cultivars, the ratio of suitable and best suitable areas was relatively high in the domestic varieties during the past 30 years. However, there is almost no difference between the IRG domestic and introduced varieties in the IRG suitability classes after the 2050s. These results can predict changes in the IRG suitability classes between domestic and introduced cultivars according to the climate change scenario, but there are limitations in accurately predicting the productivity of IRG because the results may vary depending on other environmental factors.
PURPOSES : This study aims to determine the type (e.g., melting point, freezing point, latent heat fusion) and optimal content of phase change material (PCM) based on the numerical and experimental analyses evaluating the effects of heat transfer in PCM-modified asphalt pavement systems.
METHODS : The effect of PCM on the thermophysical properties of PCM-modified asphalt concrete can be taken as an effective volumetric heat capacity. The volumetric fraction of PCM was calculated using an iterative method. The numerical model was established and computed using the MATLAB 2020 software. The optimum PCM design tool was developed to select the type and contents of the PCM. The PCM was chosen based on the following criteria: black-ice-formation delay time, minimize temperature increase, and increase temperature area. To validate the numerical model, asphalt mixtures were modified with varying PCM contents, and the temperature response of the PCMmodified asphalt samples was examined via temperature test. RESULTS : The numerical results showed that incorporating PCM into the asphalt mixture can slow the cooling rate of the pavement system. The predicted results from the optimum PCM design tool were highly consistent with the measured values from the laboratory temperature test. CONCLUSIONS : The temperature of PCM-modified asphalt pavement can be predicted via numerical method. The effect of PCM on the thermophysical properties can be considered as effective volumetric heat capacity; while the volume fraction of PCM can be calculated via an iterative method. The accuracy of the numerical model was confirmed by a high agreement between the measured and predicted values.