『여선외사』는 청대에 창작된 백화장편소설이다. 본 논문은 이 소설이 ‘정난지변’을 소설의 주요 플롯으로 차용하면서, 전쟁을 이끄는 주체로 남성이 아닌, 당새아와 다양한 여성인물들을 전면에 내세운 점에 주목했다. 그리하여 먼저 소설 속 다양한 여성형상을 인물이 속한 세계에 따라 선계, 마계, 인간계로 나누어 특징을 분석한 후, 여성인물들의 가치와 신념이 작동하는 방식의 고찰을 통해 이러한 여성형상이 갖는 소설적 의미를 살펴보고자 한다.

The purpose of this study was to identify the relationship between bullying, nursing work environment, reality shock and factors of influence on turnover intension. Data were collected from 381 nurses who were under the charge nurse at a hospital with more than 600 beds in Seoul. The collected data were analyzed using the SPSS24.0 program. The mean score for turnover intension was 3.61 ± 0.89. The intension of turnover was correlated with bullying in the workplace (r=0.197, ρ=.001), the nursing work environment (r=-.409, p=.001), and reality shock (r=.572, p=.001). Variables affecting turnover intension were the work department(β=-0.018, ρ=.049), working environment(β=-0.424, ρ<.000), and reality shock(β=0.654, ρ<.000). The total amount of explanation for turnover intension was 37.3%. The degree of turnover intension of nurses was affected by work in general wards, the experience of workplace bullying and the nursing work environment. To reduce turnover intension, nursing work needs to be analyzed and efforts are needed to establish an effective communication system.

The desulfurizers facility is cylindrical shape. To operate properly it needs nozzles cleaned, get rid of lime adhesion and sludge, repair the wear and corrosion of facility regularly. For this purpose, workers shall access the ceiling or vertical wall at high place. Ordinary scaffoldings such as steel pipe scaffolding or system scaffolding have been using so that workers can access them. With these ordinary scaffoldings, openings around cylindrical wall are inevitable which make workers can expose always to the risk of falling. The purpose of this study is to develop customized scaffolding to minimize the openings to prevent workers form falling during maintenance it. It consists of a hexagonal central tower and six trapezoidal outer towers. And the bracing among the towers have connected each other for self-standing and for maintaining the structure of towers. Span decks, the circumference footstools, steps, etc. are laid on each floor. The safety is reviewed by structural analysis and performance test. With this study, openings each floor of this scaffold are removed. The gap between the cylindrical wall and the edge of the work stage is approximately 100 mm. Therefore, we expect that workers can work safely and efficiently.

국립수산과학원과 지역자치단체의 적조모니터링 결과를 바탕으로 해양환경 변동이 적조발생에 미치는 영향을 규명하였다. 1972년 적조 모니터링이 시작된 이후, 1980년대에서 1990년대까지 적조 발생은 지속적으로 증가를 하였으며, 1998년 109건의 최다 적조발생 이후 2010년대까지 감소 추세를 보이고 있다. 1970년대는 대부분 규조 적조가 발생하였으며, 1980년대에는 연안성 와편모조류가 주로 적조를 일으켰으며, 1993년 이후 Cochlodinium polykrikoides 적조가 지속적으로 발생하고 있다. 우리나라에서 수산피해를 일으킨 유해 적조 생물은 3종이다. 1981년 진해만에서 Karenia mikimotoi에 의한 고밀도 적조가 발생하여 패류가 대량 폐사하였다. 1992년 통영해역에서 Karenina sp.에 의한 적조가 발생하여 양식어류를 폐사시켰으며, 1995년 C. polykrikoides 적조로 765억 원의 최대 규모의 수산피해가 발생한 이후 지속적으로 발생하고 있다. 연안해역의 영양염 농도는 1980년대에 가장 높았으며, 1990년 중반 이후 매우 감소하고 있다. 이러한 영 양염 감소는 적조발생 감소를 잘 설명해 준다. 2016년 이후 30℃이상의 여름 고수온이 나타나며 C. polykrikoides의 적조 발생 범위와 규모 는 매우 감소하였다. 2016년 K. mikimotoi 적조가 전남 장흥∼고흥 해역에 발생하였으며, C. polykrikoides 적조는 여수해역에만 발생하였다. 2017년은 C. polykrikoides 적조 발생이 없었으며, Alexandrium affine 적조가 전남 여수∼경남 통영해역까지 발생하였다. 2018년은 평년에 비해 소규모 C. polykrikoides 적조가 발생하였다. 본 연구결과 우리나라 연안의 영양염 감소와 기후변화로 인한 고수온은 적조 발생에 영향을 주는 것으로 판단된다.

This study assessed the color, polyphenol content, and sensory characteristics of dressing containing varying concentrations (0, 3, 6 and 9%) of freeze-dried Natto. We determined that the absence of freeze-dried Natto (0%) imparted the highest additive value for both L and a, b. The polyphenol contents obtained were 0.63, 0.69, 0.74, and 0.82 mg/g for 0, 3, 6 and 9% of dressing containing freeze-dried Natto, respectively. The appearance, color, taste, texture, and overall preference of dressings with freeze-dried Natto showed significant differences between the samples. The overall preference was highest at 5.92 points, with dressing containing 9% Natto. The quality characteristics of the 9% added samples exhibited significantly higher values as compared to those of the controls, raising the possibility of development as a health-functional dressing.

This study evaluated the color, DPPH radical activity, and sensory characteristics of nutritional bars supplemented with varying concentrations (0, 2.5, 5, and 7.5%) of freeze-dried Natto. An inconsistent pattern was observed for the L value, whereas both a and b values increased significantly up to 5% addition of freeze-dried Natto. The DPPH free radical scavenging activity of nutritional bars supplemented with 0, 2.5, 5, and 7.5% freeze-dried Natto were determined to be 59.54, 59.70, 44.85, and 55.07%, respectively. The appearance, color, taste, texture, and overall preference of nutritional bars supplemented with freeze-dried Natto showed significant differences between the samples. The overall preference of the nutrient bar was highest at 6.08 points, determined for the 2.5% Natto supplemented bar. The quality characteristics of the 2.5% added samples exhibited significantly higher values as compared to the controls, thereby indicating the potential of development in health-functional cereal bars.

This study was conducted to evaluate the overall dietary habits and nutritional status of 294 elementary school students located in Gwangju using the NUTRILITE nutrition quotient (NQ). The NQ score of the subjects was 59.5 out of 100, which corresponds to the level requiring “monitoring”. Compared to the 64.4 score of students in the 5th and 6th grades of six metropolitan cities, the scores of the present subjects were lower. The NQ components were 57.4 for balance factors, 52.4 for moderation factors, 55.0 for diversification factors, 57.6 for practice factors, and 80.1 for environmental factors. Regarding the characteristics according to the NQ level, the score (61.5 in 7 times/wk vs. 55.3 in 1-2 or none times/wk) tended to be higher in subjects who frequently eat with their families (p<0.001). In conclusion, nutrition education should be provided to students to increase the frequency of meals with their families, to develop a habit of exercising regularly, and reduce the consumption of ramen, cookies, and processed drinks that are frequently consumed. These results can be used as basic data to develop nutrition education programs to improve the dietary habits and nutritional status of students in Gwangju.

In order to design a diesel engine system and predict its performance, it is necessary to analyze the gas flow of the intake and exhaust system. A gas flow analysis in three-dimensional (3D) format needs a high-resolution workstation and enormous time for analysis. Therefore, the method of characteristics (MOC) was used for a gas flow analysis with a fast calculation time and a low-resolution workstation. An experiment was conducted on a single cylinder diesel engine to measure pressure in cylinder, intake pipe and exhaust pipe. The one-dimensional (1D) gas flow was analyzed under the same conditions as the experiment. The engine speed, valve timing and compression ratio were the same conditions and the intake pressure was inputted as the experimental results. Bent pipe such as an exhaust port that cannot be realized in 1D was omitted. As results of validation, the cylinder pressure showed accuracy, but the exhaust pipe pressure exhibited inaccuracy. This is considered as an error caused by the failure to implement a bent pipe such as an exhaust port. When analyzed in 3D, calculation time required 61 hours more based on a model of this study. In the future, we intend to implement a bent pipe that cannot be realized in 1D using 3D and prepare a method to supplement reliability by using 1D-3D coupling.

This study was conducted to investigate changes on the quality characteristics of Prunus davidiana sugar extracts (PSEs) by processing conditions. The PSEs were prepared by extraction with commercial sucrose at 4°C or 25°C for 9 months with or without a pressure plate. The quality characteristics of PSEs were analyzed for Bxo, pH, total acidity, Hunter color value, alcohol content, polyphenol content, DPPH radical scaveging activity, and free sugar content. Bxo increased significantly while pH decreased with increased storage period (p<0.05). The PSEs stored at 4oC scored lower than those stored at 25oC for total acidity, alcohol content, and polyphenol contents. The PSEs with pressure plate possessed lower alcohol content and higher polyphenol content and DPPH free radical scavenging activity than those without pressure plate. The sucrose content in PSEs decreased with increased storage period, while glucose and fructose contents increased. These results indicate that by increasing storage period, sucrose in PSEs is decomposed into glucose and fructose, and the quality characteristics of PSEs such as total acidity, alcohol, and polyphenol content depend on processing conditions.

This study was conducted to find out the change in nutritional components and antioxidant activities of salted Chinese cabbage according to storage temperature and duration using supercooling. Salted Chinese cabbage was investigated every 2 weeks while it was stored at -2℃ and 2℃ for 8 weeks. This was followed by an analysis of freeze dried samples. The analyzed contents were free sugar and free amino acid contents, DPPH and ABTS radical scavenging activity, and TPC and TFC. Free sugar content of salted Chinese cabbage decreased with longer storage duration, while free amino acid did not change significantly. DPPH and ABTS radical scavenging activities did not change significantly with storage duration whereas the TPC and TFC of salted Chinese cabbage stored at -2℃ was higher than that stored at 2℃ for 6 weeks. Therefore, the quality of salted Chinese cabbage was maintained in direct refrigerator storage for a long duration, showing economic and industrial values as a new storage technology.

최근 기후변화 및 국제교역량, 여행객, 외국 이주민 증가 등으로 국내 농작물에 큰 피해를 입힐 수 있는 고위험 식물병의 유입이 꾸준히 증가하고 있다. 검역 대상인 병원체의 수가 증가함에 따라 검역기관 및 연구원의 업무량이 증가하고 있다. 본 연구에서는 지역별 주요 수출대상 과수인 포도, 단감, 감귤의 국내 미기록 병과 원인병원체에 대한 예찰조사를 수행하였다. 이를 위해 전국을 경기-강원, 충청, 전북, 전남, 경북, 경남 그리고 제주 등 7개 권역으로 나누고 각 권역 소재 대학에서 예찰조사를 수행하여 예찰네트워크를 구축하고자 하였다. 포도 대상 병은 모두 4종으로, Pierce’s disease (Xylella fastidiosa), brown rot (Monilinia fructigena), anthracnose (Greeneria uvicola), 그리고 esca (Phaeomoniella chlamydospora)을 조사하였고 경기-강원, 충청도, 전라북도, 그리고 경상북도 권역을 중심으로 각 권역당 3개 지역 그리고 지역당 3개 지점을 두고 조사하였다. 단감은 모두 3종으로, brown spot (Fusicladium levieri), black leaf spot (Adisciso kaki), 그리고 black spot (Phoma kakivora)을 조사하였고 국내 단감 주생산지인 경상남도와 전라남도 권역을 중심으로 각 권역당 3개 지역 그리고 지역당 3개 지점을 두고 조사하였다. 감귤 대상 병은 모두 2종으로, citrus scab (Elsinoë australis), Septoria spot (Septoria citri)을 조사하였고 감귤 주생산지인 제주권역을 중심으로 조사하였다. 모두 9종에 대한 예찰조사는 2019년 4월부터 10월까지 2주간격으로 실시하였다. 예찰조사결과 주요 수출대상 과수인 포도, 단감, 감귤의 국내미기록병 9종에 대한 원인병원체는 발견되지 않았다. 이 연구를 통해 식물병을 조기에 탐지할 수 있는 전국적인 모니터링 시스템을 구축하였고, 국외 외래유입병들의 예찰조사를 위한 지역 거점을 확보하였다고 평가된다.

The directed energy deposition (DED) process of metal 3D printing technologies has been treated as an effective method for welding, repairing, and even 3-dimensional building of machinery parts. In this study, stainless steel 316L (STS316L) and Inconel 625 (IN625) alloy powders are additively manufactured using the DED process, and the microstructure of the fabricated STS316L/IN625 sample is investigated. In particular, there are no secondary phases in the interface between STS316L and the IN625 alloy. The EDS and Vickers hardness results clearly show compositionally and mechanically transient layers a few tens of micrometers in thickness. Interestingly, several cracks are only observed in the STS 316L rather than in the IN625 alloy near the interface. In addition, small-sized voids 200– 400 nm in diameter that look like trapped pores are present in both materials. The cracks present near the interface are formed by tensile stress in STS316L caused by the difference in the CTE (coefficient of thermal expansion) between the two materials during the DED process. These results can provide fundamental information for the fabrication of machinery parts that require joining of two materials, such as valves.

A T-800 (Co-Mo-Cr) coating material is fabricated using Co-Mo-Cr powder feedstock and laser cladding. The microstructure and melted Al erosion properties of the laser-cladded T-800 coating material are investigated. The Al erosion properties of the HVOF-sprayed MoB-CoCr and bulk T-800 material are also examined and compared with the laser-cladded T-800 coating material. Co and lave phases (Co2MoCr and Co3Mo2Si) are detected in both the lasercladded T-800 coating and the bulk T-800 materials. However, the sizes of the lave phases are measured as 7.9 μm and 60.6 μm for the laser-cladded and bulk T-800 materials, respectively. After the Al erosion tests, the erosion layer thicknesses of the three materials are measured as 91.50 μm (HVOF MoB-CoCr coating), 204.83 μm (laser cladded T- 800), and 226.33 μm (bulk T-800). In the HVOF MoB-CoCr coating material, coarse cracks and delamination of the coating layer are observed. On the other hand, no cracks or local delamination of the coating layer are detected in the laser T-800 material even after the Al erosion test. Based on the above results, the authors discuss the appropriate material and process that could replace conventional bulk T-800 materials used as molten Al pots.

Although membrane bio-reactor (MBR) has been widely applied for wastewater treatment plants, the membrane fouling problems are still considered as an obstacle to overcome. Thus, many studies and commercial developments on mitigating membrane fouling in MBR have been carried out. Recently, high voltage impulse (HVI) has gained attention for a possible alternative technique for desalting, non-thermal sterilization, bromate-free disinfection and mitigation of membrane fouling. In this study, it was verified if the HVI could be used for mitigation of membrane fouling, particularly the internal pore fouling in MBR. The HVI was applied to the fouled membrane under different conditions of electric fields (E) and contact time (t) of HVI in order to investigate how much of internal pore fouling was reduced. The internal pore fouling resistance (Rf) after HVI induction was reduced as both E and t increased. For example, Rf decreased by 19% when the applied E was 5 kV/cm and t was 80 min. However, the Rf decreased by 71% as the E increased to 15 kV/cm under the same contact time. The correlation between E and t that needed for 20% of Rf reduction was modeled based on kinetics. The model equation, E1.54t = 1.2 × 103 was obtained by the membrane filtration data that were obtained with and without HVI induction. The equation states the products of En and t is always constant, which means that the required contact time can be reduced in accordance with the increase of E.

This study analyzes the research trends of PCK (Pedagogical Content Knowledge) in Korean English classes from 2005 to 2019 across ten journal articles, two master’s theses, two doctoral dissertations, and five research reports. This was intended to provide hints for the future direction of English PCK studies. Six criteria—subject-matter knowledge, pedagogical knowledge, learner knowledge, curriculum knowledge, social context knowledge, and action research knowledge— have been applied to the analysis of the selected English PCK studies. The findings are as follows. Study on the subject-matter knowledge was the most frequent, appearing in 15 studies, mainly dealing with linguistic knowledge. In the field of pedagogical knowledge, studies on class design were most common, and in the field of learner knowledge, learner background and learner characteristics were equally studied. In the social context knowledge field, there were relatively few studies on parents, and in the field of action research knowledge, the number of studies corresponding to three sub-factors was the same. Our study concludes that to systematize the study of PCK for teacher professionalism in the subject matter of English, English PCK education should be done in both pre-service and in-service institutions and that PCK research environments should be provided to this end.

The urban expressway is widely used to avoid traffic jams in highly-populated urban areas. However, vehicle exhaust can be easily transported to the neighboring area including residential buildings. In this study, we investigated the transport and penetration of vehicle exhaust into the nearby high-story residential building. Black carbon (BC) and lung deposited surface area (LDSA) concentrations were monitored every 1 min using an aethalometer (AE51, Magee) and a nanoparticle aerosol monitor (AeroTrak 9000, TSI), respectively. For comparison, the measurement was carried out in both the living room and balcony of the apartment from January 18 to January 25, 2016. The CO2 concentration indicated the presence of residents in the living room and transport of vehicle exhaust from the roadway in the balcony. Its diurnal variation showed a significant difference between weekdays and the weekend, implying the different time activity of residents and traffic volume. BC and LDSA concentrations were 1.4±1.5 μg/m3 and 53.9±45.0 μm2/cm3 indoors, and 1.9±1.0 μg/m3, 76.2±34.5 μm2/cm3 outdoors, respectively. The indoor to outdoor concentration ratios range from 0.6 to 0.8, indicating the significant influence of outdoor vehicle exhaust. The highest concentrations of BC and LDSA were observed in the morning rush hours, except for those indoors during the weekend. In particular, the outdoor effect is significant during the morning rush hours. Indoor air quality management is urgently needed for residents living near the urban expressway.