The purpose of this study was to propose an operational concept for a ship in a fleet equipped with an interceptor missile system, a naval surface to air defense system, and to develop a simulation program that reflects it. The results of the defense activities of other ships in the fleet can be reflected by receiving information about the status of the enemy missiles. The allocation of defensive assets is based on the survival probability of the ship, not on the destruction of enemy attacks, which can be obtained as the product of the expected survival probability for each enemy missile. In addition, the concept of predicted survivability was introduced to assess the loss of future defense opportunities that would result from assigning a new command. A simulation program was also developed as a tool for realizing the proposed concept of operations, which generated cases.

본 연구는 추가적인 장비 없이 UAV만을 사용한 균열폭 측정 및 균열의 3차원 재구성 방법을 제안한다. UAV 사진측량법 및 CNN을이용한 균열의 3차원 재구성 및 균열폭 측정 검증을 위해 5곳의 균열이 존재하는 벽면을 대상으로 균열의 3차원 재구성을 하였 으며 UAV와 균열 사이의 거리 4가지에 대해 균열폭을 측정하고 균열 현미경 측정값과 비교하여 정확성을 검증하였다. 대부분의 균열 에서 균열폭을 정확히 측정하였으나 균열폭이 0.5mm보다 작은 경우와 벽면이 심하게 그늘져 어두운 곳에서는 측정 유효성이 떨어지 는 결과를 보였다.

PURPOSES : This study intended to derive a methodology that can evaluate water splash caused by distress on the road surface based on experimental methods and to present quantitatively by analyzing the impact on road users. METHODS : Through literature review, the current problems of road pavement and drainage facility standards, the factors of road splash caused by puddle was selected to measure damage. Field measurements were conducted by setting different conditions for each factors and setting different conditions based on the hypothesis. In addition, water splash by surface distress type and puddle was measured to analyze using statistical techniques from correlation to multi-regression. RESULTS : The maximum and effective distance due to road splash increases as the driving speed, regardless of vehicle load and tyre type. Splash was measured according to the type of road distress to analyze the correlation between the influencing factors, and there was a weak correlation between the width and length of the puddle, depth and the effective distance. In addition, the interaction analysis showed that there was an interaction between the width of the water hole and the depth of puddle. Moreover, based on the multi-regression analysis, it was not statistical significant. This is judged to that the number of data samples used for this analysis is limited because the diversity of puddle conditions cannot be set differently for each type of distress. CONCLUSIONS : Since the distress of depending on the size, depth and shape of the road surface, it is necessary to calculate it and present maintenance standards, so this results present an experimental methodology that can intuitively evaluate damage cased by unestablished puddle. From this results, this is expected to be used as a quantitative indicator to evaluate the satisfaction of road users as a functional performance according to road surface condition.

In this study, we detected the presence of residual pesticides in 341 agricultural products collected from local food outlets in western Gyeonggi Province. Residual pesticides were detected in 105 (30.8%) samples. Six samples exceeded the legal limits for residual pesticides, resulting in a non-compliance rate of 1.8%, which was slightly higher than the average non-compliance rate of 1.4% in the last three years. Among the tested agricultural products, only fruits and vegetables were found to have pesticide residues, with 24 of 34 fruits (a detection rate of 70.6%) and 81 of 277 vegetables (a detection rate of 29.2%) testing positive. In total, 59 types of pesticides, including acetamiprid, which was detected 208 times, were detected and had a detection range of 0.01–2.38 mg/kg. Among the 105 agricultural products containing pesticide residues, a single pesticide was detected in 62 samples (59%) and two or more pesticides were detected in 43 samples (41%). In particular, 14 pesticides were detected in the same sample of peaches; dinotefuran was detected 21 times. Upon examining the toxicity of the detected pesticides, Class III pesticides (moderate toxicity) were detected 44 times (21.2%) and Class IV pesticides (low toxicity) were detected 164 times (78.8%). Class I, II, and III pesticides with fish toxicity were detected 68 (32.7%), 14 (6.7%), and 126 times (60.6%), respectively. Upon examining the exposure to high-frequency pesticide components detected five or more times, the hazard index was found to be ≤2.8%. Accordingly, the hazard of residual pesticides based on dietary intake was deemed insignificant.

The status of residual pesticides was investigated in four pepper seed oil samples and 36 pepperflavored oil samples oil distributed on the market from August to December 2022. A total of 179 pesticides were monitored in 40 samples, and 14 pesticides were detected in 39 of the samples, with a detection range of 0.01-2.16 mg/kg. In chili seed oil, 10 pesticides were detected 27 times with a range of 0.11-2.16 mg/kg, and in pepper-flavored oil, 9 pesticides were detected 94 times with a range of 0.01-0.80 mg/kg. The most frequently detected pesticides were tebuconazole, ethion, and difenoconazole, with ethion being detected in large concentrations in products using Chinese raw materials. Ethion, an unregistered pesticide in the Republic of Korea, has not been detected in the Gyeonggi-do area in the past 10 years. It is thought that the detection of ethion can be utilized as an indicator of products made in China. Peppers are a representative agricultural product for which many pesticides are used, and if the pesticides transferred to pepper seeds are not removed, the probability of detecting various types of pesticides in pepper seed oil is very high. Therefore, continuous research is needed to ensure the safety of pepper seed oil.

Recently, the electron transport layer (ETL) has become one of the key components for high-performance perovskite solar cell (PSC). This study is motivated by the nonreproducible performance of ETL made of spin coated SnO2 applied to a PSC. We made a comparative study between tin oxide deposited by atomic layer deposition (ALD) or spin coating to be used as an ETL in N-I-P PSC. 15 nm-thick Tin oxide thin films were deposited by ALD using tetrakisdimethylanmiotin (TDMASn) and using reactant ozone at 120 °C. PSC using ALD SnO2 as ETL showed a maximum efficiency of 18.97 %, and PSC using spin coated SnO2 showed a maximum efficiency of 18.46 %. This is because the short circuit current (Jsc) of PSC using the ALD SnO2 layer was 0.75 mA/cm2 higher than that of the spin coated SnO2. This result can be attributed to the fact that the electron transfer distance from the perovskite is constant due to the thickness uniformity of ALD SnO2. Therefore ALD SnO2 is a candidate as a ETL for use in PSC vacuum deposition.

In this study, the quality of sow pork was compared with commercial pork to evaluate sow pork as raw meat material for processing. Texture, cooking loss, color, pH, water, lipid, fatty acid, volatile profiles, and sensory characteristics of 3 parts (tenderloin, loin, hind leg) of sow and commercial pork were analyzed. In texture analysis, sow pork had significantly higher shear force compared to commercial pork (tenderloin: sow 143.19 N, commercial 107.79 N; loin: sow 173.62 N, commercial 120.65 N; hind leg: sow 211.76 N, commercial 112.80 N) (p<0.05). There were significant differences in cooking loss, color, and pH, but they differed by part. A total of 49 volatile compounds were identified, and there were significant differences in 22 volatile compounds. In the case of hexanal (one of the warmed-over flavors), which was detected on the largest scale, the relative concentration was significantly higher in the tenderloin of commercial pork (p<0.05). On the other hand, no differences were reported by sensory analysis for hardness, off-flavor, juiciness, oiliness, appearance, taste, and acceptability between cooked sow and commercial pork. This study provides a database on the quality of sow pork by parts, which is considerable to develop proceed meat products using sow meat.

해수의 탁도는 수중의 부유 물질이나 생물에 의해 혼탁해지는 정도를 정량적으로 나타낸 변수로 연안 환경을 이해하는 데 중요한 해양 변수이다. 한반도의 서해안은 얕은 수심, 조류, 하천 유래 부유 퇴적물의 영향으로 광학적으로 강한 시공간 변동성을 가지고 있어서 인공위성 자료를 활용한 탁도 산출은 해양학적으로 다양한 활용 가능성을 가 진다. 본 연구에서는 경기만을 연구 해역으로 설정하고, 해수의 탁도 산출 알고리즘 개발을 위하여 2018년부터 2023년 7월까지 해양환경공단의 해양수질자동측정망 기반 현장 관측 탁도 자료와 Sentinel-2 인공위성의 MSI (Multi-Spectral Instrument) Level-2 자료를 사용하여 위성-현장 관측치 사이의 일치점 데이터베이스를 생산하였다. 이전의 다양한 탁도 산출식을 조사하여 정확도를 상호 비교하였고 경기만 해역에서 최적 파장대를 조사하고 분석하였다. 그 결과 녹색 밴드 (560 nm)를 기반으로 한 탁도 산출식이 0.08 NTU의 상대적으로 작은 평균 제곱근 오차를 보였다. 인공위성 광학 자료 를 기반으로 산출된 탁도는 해수의 광학적 특성과 연안 환경의 변동성을 이해하고 다양한 해상 활동에 도움을 줄 수 있을 것으로 기대된다.

Melon fruits exhibit a wide range of morphological variations in fruit shape, sugar content, net quality, diameter and weight, which are largely dependent on the variety. These characteristics significantly affect marketability. For netted varieties, the uniformity and pattern of the net serve as key factors in determining the external quality of the melon and act as indicators of its internal quality. In this study, we evaluated the effect of fruit morphology and growth on netting by analyzing the changes in melon fruit quality under LED light treatment and monitoring fruit growth. Computer vision analysis was used for quantitative evaluation of fruit net quality, and a three-variable logistic model was applied to simulate fruit growth. The results showed that melons grown under LED conditions exhibited more uniform fruit shape and improvements in both net quality and sugar content compared to the control group. The results of the logistic model showed minimal error values and consistent curve slopes across treatments, confirming its ability to accurately predict fruit growth patterns under varying light conditions. This study provides an understanding of the effects of fruit shape and growth on net quality.

In this study, the effect of crown heating on the cultivation environment, budding, flowering and yields of strawberry was analyzed. In December, January, and February, when the outside temperature was low, the average strawberry crown temperature at daytime in the test zone was 1.3°C higher than that in the control zone, and the average strawberry crown temperature at nighttime in the test zone was 2.7°C higher than that in the control zone. The average bed temperature at daytime in test zone was 1.7°C higher than that in the control zone, and the average bed temperature at nighttime in test zone was 2.4°C higher than that in the control zone. As a result of performing correlation analysis and regression analysis on strawberry crown temperature and budding period, the correlation coefficient was -0.86, which tended to be shorter as the crown temperature was higher, and the determination coefficient was 0.74. The total yields of strawberry during test period were 392.6 g/plant for test greenhouse and 346.0 g/plant for control greenhouse respectively. As for the quality of strawberries, the ratio of 2L (very large) grades and L (large) grades was 62.4% in the test greenhouse and 58.5% in the control greenhouse, indicating that the proportion of high quality strawberries was higher in the test greenhouse.