In fisheries, the importance of designing efficient fish cages is being emphasized as aquaculture has become more production than capture fishing. Particularly, the gravity cage system is one of the popular fish cage system in Korea. Currently, gravity cages of various shapes and sizes are being widely designed and installed in offshore and inland seas. The cage is subject to external forces, such as currents and waves, and the shape of the structure and tension on the ropes changes according to these external forces. Thus, it is important to accurately calculate these dynamic behavior, including the external forces and tension on the structure during the design stage. In this study, three types of cage systems with an equal internal volume of 8000 m3 were analyzed using mass-spring models and their behavior was interpreted through simulations. These simulations were used to analyze the behavior and tension of the ropes in response to currents and waves to aid in the selection of individual cage sizes for a given total volume. The numerical calculation results indicate that depending on the flow rate, the most resistant system is System 1, which has eight strays, and System 2 and System 3 have 69.4% and 54.8% of the resistance of System 1. Further, total resistance increased as the number of cages increased for all flow rates.

In the previous study, a shooting trajectory assuming that the purse seine shooting trajectory is a circle was proposed based on the speed and direction of the movement of the fish school. However, in practice, a trajectory that is closer to an elliptical shape than a circular one is often formed. In this study, the existing circular trajectory and the elliptical trajectory methods were compared under the same conditions to confirm the effectiveness of elliptical shooting trajectory. In addition, changes in the eccentricity of ellipses were derived to assess which type of ellipse was appropriate as a shooting trajectory. When a high-speed fish school moves in a straight line, an elliptical shooting trajectory with the eccentricity of 0.7 to 0.9 will be reasonable, and for middle-low speed fish school, an elliptical shooting trajectory with the eccentricity of 0.4 to 0.6 will be more useful than a circle shooting trajectory.

We used three gas sensors to monitor hydrogen sulfide, ammonia, and volatile organic compounds (VOCs), which were frequently emitted from environmental facilities, such as municipal wastewater treatment, livestock manure treatment, and food waste composting facilities. Two electrochemical (EC) sensors for detecting hydrogen sulfide and ammonia, and a photoionization detector (PID) sensor for detecting VOCs were characterized in this study. The performance of their linearity by concentration levels, lower detection limit (LDL), repeatability, reproducibility, precision, and response time were tested under the laboratory condition. The linearity according to concentration levels were favorable for all three sensors with high correlation coefficients (R2 > 0.98). The ammonia sensor showed the highest LDL (18.6 ppb) and the hydrogen sulfide and VOC sensors showed 22.3 ppb and 26.7 ppb of LDL, respectively. The reproducibility and precision were favorable for all three sensors, indicating a lower relative standard deviation (RSD) than 0.9% in the reproducibility test and 7.2% in the precision test. The response times to reach target concentration were varied from 1 to 12 minutes. The ammonia sensor needed 12 minutes of response time at 1 ppm target the NH3 concentration and the hydrogen sulfide and VOC sensors needed less than 2 minutes of response time.

이 연구에서는 경영체DB와 토양DB로 구성된 농업빅데이터와 성주군 참외와 경산시 복숭아 경영성과 자료를 활용하여 품목별 단위 생산성을 예측하였다. 또한 추정결과와 품목별 판매단가를 적용하여 휴· 폐경지역 해당 품목 도입 시 효과를 살펴보았다. 분석결과를 요약하면 첫째, 참외는 적지와 비적지 단위생산성에 차이가 존재하였고, 복숭아는 판매가격에 차이가 존재하는 것을 확인 할 수 있었다. 둘째, 참외의 적지 생산성이 비적지보다 높게 나타나며, 배수가 잘 될수록 생산성이 증가하는 것을 알 수 있 었다. 셋째, 복숭아는 사토일수록 생산성이 감소하는 것을 알 수 있으며, 경사가 낮을수록 생산성이 증 가하는 것으로 나타났다. 넷째, 참외의 휴·폐경 활용효과는 총 488.4백만원으로 추정되었고, 복숭아의 휴·폐경 활용효과는 총 745백만원으로 추정되었다.

In this study, the product characteristics and physicochemical properties were investigated through collection of commercial porridge. The addition rate of grain raw materials was about 6.5~11.75%, glutinous rice was added at a rate of about 23~60% to improve the viscosity and various other food additives were used. The moisture content characteristics varied among the products. The rotational viscosity of CP (Commercial Porridge)4 was the highest at 39,054 cP, while the flow viscosity of CP3 was least at 4.80 cm/30 seconds. The starch content differed among the products in the range of total starch 6.96~8.08%, amylose 1.41~2.61%, total sugar 6.55~12.81% and reducing sugar 0.50~0.99%. Particularly, total sugar showed a very high correlation ( 0.920) while rotational viscosity and color value (b) showed significant correlation with most of the properties i.e. moisture, solids content etc. There was a rapid increase in the reactivity of starch degrading enzyme at the early stage of the reaction which gradually decreased with time. The physicochemical characteristics of commercial porridge presented in this study could be expected to increase the industrial use value of the related research because it considers the quality of the currently commercialized porridge for the future selection of suitable porridge raw materials.

Pb(Zr,Ti)O3 (PZT) is used for the various piezoelectric devices owing to its high piezoelectric properties. However, lead (Pb), which is contained in PZT, causes various environment contaminations. (K,Na)NbO3 (NKN) is the most well-known candidate for a lead-free composition to replace PZT. A single crystal has excellent piezoelectric-properties and its properties can be changed by changing the orientation direction. It is hard to fabricate a NKN single crystal due to the sodium and potassium. Thus, (Na,K)NbO3-Ba(Cu,Nb)O3 (NKN-BCuN) is chosen to fabricate the single crystal with relative ease. NKNBCuN pellets consist of two parts, yellow single crystals and gray poly-crystals that contain copper. The area that has a large amount of copper particles may melt at low temperature but not the other areas. The liquid phase may be responsible for the abnormal grain growth in NKN-BCuN ceramics. The dielectric constant and tan δ are measured to be 684 and 0.036 at 1 kHz in NKN-BCuN, respectively. The coercive field and remnant polarization are 14 kV/cm and 20 μC/cm2.

This study examines paraelectric Bi1.5Zn1.0Nb1.5O7 (BZN), which has no hysteresis and high dielectric strength, for energy density capacitor applications. To increase the breakdown dielectric strength of the BZN film further, poly(vinylidene fluoride) BZN-PVDF composite film is fabricated by aerosol deposition. The volume ratio of each composition is calculated using dielectric constant of each composition, and we find that it was 12:88 vol% (BZN:PVDF). To modulate the structure and dielectric properties of the ferroelectric polymer PVDF, the composite film is heat-treated at 200 oC for 5 and 30 minutes following quenching. The amount of α-phase in the PVDF increases with an increasing annealing time, which in turn decreases the dielectric constant and dielectric loss. The breakdown dielectric strength of the BZN film increases by mixing PVDF. However, the breakdown field decreases with an increasing annealing time. The BZN-PVDF composite film has the energy density of 4.9 J/cm3, which is larger than that of the pure BZN film of 3.6 J/cm3.

The International Labor Organization (ILO) selected fishing as the most dangerous group of jobs in the world, and it is well known in Korea as a 4D industry. Offshore large purse seine accounts for the largest portion of the fishing industry in the coastal region with high death rate and the accident rate. The repeated disaster rate survey by the Korea Maritime Institute (KMI) shows offshore large purse seiner is the highest at 22.3 percent and coastal gill nets and offshore stow net are following at 12.4 percent and 11.9 percent in order. Therefore, risk factors occurring in offshore large purse seiners were analyzed based on data from the National Federation of Fisheries Cooperatives (NFFC) for three years from 2015 to 2017 and 4M (Man, Machine, Media, Management) 3E (Engineering, Education, Enforcement) techniques were used to provide a safe fishing environment. The number of accidents on offshore large purse seiners each year was more than 150, and the number of accidents on every fishing boats was as high as 17 percent in 2015. If the accident rate and the risk level were divided by insurance, the accident resulting from contact with machinery was the highest, and the risk of a contact with gear was low but frequently occurring. This was caused by collisions and contact with gear in situations where death and disappearance risk are not high, and accident types in situations where death and loss risk are considered to be contact with machinery, falls or other accidents. Through these analysis techniques, the frequency and risk of each type of accident on a offshore large purse seiners can be demonstrated, and it is expected to raise awareness of a safer fishing environment and contribute to the reduction of accidents.

The concern on the greenhouse gas emissions is increasing globally. Especially, the greenhouse gas emission from fisheries is an important issue from the Paris Climate Change Accord in 2015. Furthermore, the Korean government has a plan to reduce the GHG emissions as 4.8% compared to the BAU in fisheries until 2020. However, the investigation on the GHG emissions from Korean fisheries rarely carried out consistently. Therefore, the quantitative analysis of GHG emissions from Korean fishery industry is necessary as a first step to find a relevant way to reduce GHG emissions from fisheries. The purpose of this research is to investigate which degree of GHG emitted from the major offshore fisheries such as offshore gillnet fishery, offshore longline fishery, offshore jigging fishery and anchovy drag net fishery. Here, we calculated the GHG emissions from the fisheries using the Life Cycle Assessment method. The system boundary and input parameters for each process level are defined for the LCA analysis. The fuel use coefficients of the fisheries are also calculated according to the fuel type. The GHG emissions from sea activities by the fisheries will be dealt with. Furthermore, the GHG emissions for the unit weight of fishes are calculated with consideration to the different consuming areas as well. The results will be helpful to understand the circumstances of GHG emissions from Korean fisheries

The annual production of silver croaker (Argyrosomus argentatus) in Korean towed fishing gears has been increased in recent five years. In 2017, the annual production of silver croaker in metric ton was increased 99.2% compared to 2013. However, the research for silver croaker has been focused on ecology in Korea. There has not been enough research in terms of fishing gears. Therefore, the research for retention probability for towed gears was conducted on covered codend method from June, 2016 to July, 2018. During the experiments, the total catch of silver croaker was 1,563. The geometry of the experimental trawl gear was controlled by trawl monitoring system; net height was 3.3 m, distance of trawldoors was 59.8 m and distance of wing net was 17.3 m. The selection curve for silver croaker was estimated by a logit model. The analysis was applied with the confidence interval to reduce uncertainty of the estimation. The l50 was 13.87 cm and its selection range was 2.71 cm. P-value was estimated at 0.99. The mesh size for silver croaker in towed gears needs to be adjusted by considering its minimum maturity length, stakeholder’s interests and fisheries regulations.

농산물 검역통계를 통해서 채소 모종 수출 현황과 채소 접목묘의 일본 선박 수송 시의 온도 및 상대습도 변화를 분석하여 국내 채소 모종 수출 연구와 정책 수립을 위한 기초자료를 제공하기 위하여 본 연구를 수행하였다. 2007~2016년 사이 수출된 채소 모종은 배추, 양배추 등 엽채류 4종, 토마토, 오이 등 과채류 7종, 근채류 1종으로, 전세계 20여 국가에 46,146,536주(총 1,839건) 수출 되었다. 상업적 목적을 위한 채소 모종의 주요 수출국은 일본이었고, 2016년 기준 일본에 수출된 모종은 주로 과채류 접목묘인 가지, 토마토, 오이, 수박 및 고추 등으로 총 2,575,446주가 수출되었으며, 총 수출 금액으로는 0.7~1.6백만불로 추산된다 일본으로 수출되는 접목묘는 도시농업용과 농가용으로 구분되고 있으며, 온도 15~18oC의 냉장 컨테이너를 이용한 선박 수송은 포장 → 선적 → 검역(한국 부산항) → 검역(일본 시모노세키항) → 바이어 수령의 과정으로 대략 24시간 내외가 소요되고 있었다. 일본의 도시농업 발달로 인한 채소 모종 수요의 급격한 증가와 러시아 등 인근 국가들의 채소 접목묘에 대해 높아지고 있는 관심과 수요는 우리나라 채소 접목묘 수출 규모를 확대할 수 있는 기회가 될 것이다. 채소 모종 수출을 확대하기 위해서는 본 연구 결과를 기반으로 정확한 채소 모종수출 정보의 수집 및 분석이 이루어질 수 있도록 정부의 적극적인 정책 지원과 수출 전용 모종 생산, 모종 저장 및 수송 관련 기술 개발을 위한 연구가 필요하다.

3종의 일반토마토 ‘대프니스’, ‘도태랑다이아’, ‘마스카라’를 대목 ‘B블로킹’에 접목하고 접목 활착 후 10일부터 10일 간격으로 40일 까지 육묘용 표준양액(S)의 0.5S, 1,0S, 2,0S 로 시비수준 처리를 하였다. 각 시기별로 묘의 생육 인자들을 조사하였고, 묘소질 지표인 TR율, 충실도, DQI를 계산하였다. 그리고 생육인자들과 묘소질 지표와의 상관관계를 분석하였고, 묘령별로 야간온도를 10, 15, 25℃를 목표로 3수준으로 처리하여 상대생장률(RGR)을 분석하였다. 그 결과, 토마토 접목묘의 양적인 생육인자들은 모두 시비농도가 높을수록 증가하였고, 다양한 크기 범위의 묘를 생산할 수 있었다. 그리고 묘의 바이오메스 관련 생육인자가 충실도와 DQI에 높은 정의상관이 있음을 알 수 있었으며, 충실도와 DQI의 고도로 유의한 1차 선형회귀식((Y=-0.0256+0.0029*X, Adj R2=0.9480, p<0.0001)이 도출되었다. 정식 후 2주간의 RGR은 묘령이 높아질수록 감소하는 경향을 보였고, 육묘기 시비수준에 따라서는 접목활착 후 30일묘와 40일묘에서 표준 시비수준 1.0S에서 RGR이 높았다. 시비수준별 육묘기 DQI와 정식후 초기 RGR과 유의한 선형회귀식을 도출하였으며, 표준 시비수준 1.0S에서 DQI가 높아짐에 따라 RGR이 높게 유지되었다. 이러한 결과는 DQI가 원통형 종이포트 토마토 접목묘의 묘소질의 지표로 이용될 수 있고, DQI와 정식 후 초기 상대생장률과의 관계분석을 통하여 우량묘의 기준 설정에 활용될 수 있을 것이다.

본 연구는 건조숙성 조건에 따른 한우 설도육의 이화학적 및 관능적 특성 변화를 조사하고자 수행하였다. 한우 거세 1등급 설도육 54개를 구입하여 온도(2℃, 4℃), 상대습도(65%, 75%, 85%) 및 건조숙성기간(10~90일)에 따라 4종(T1~T4)의 조건으로 나누어 건조숙성하면서 도가니살 및 보섭살의 육질특성과 삼각살을 포함한 관능특성을 비교하였다. 도가니 및 보섭살의 지방함량은 4개 처리구 모두에서 숙성기간이 증가함에 따라 유의적으로 증가하였다(p<0.05). 반면에 수분함량은 건조숙성기간이 증가함에 따라 도가니육은 T2와 T4, 보섭육은 T2에서 유의적으로 감소하였다(p<0.05). 도가니 및 보섭육의 육색은 건조숙성기간이 증가됨에 따라 4개의 처리구 모두 L값(백색도), a값(적색도), b값(황색도)이 유의적으로 감소하였다. 가열감량은 도가니육의 경우 T2만 건조숙성기간이 증가할수록 감소되는 경향이었고 나머지 3개 처리구는 유의적인 차이가 없었다. 보섭육의 경우 가열감량은 처리구 4개 모두 건조숙성기간이 증가할수록 감소되는 경향이었다. 동일한 숙성일 내 처리구간 비교에서는 T2가 가열감량이 유의적으로 가장 낮았다. 전단력은 도가니육과 보섭육 모두 4개 처리구에서 건조숙성기간이 증가할수록 유의적으로 감소한 반면(p<0.05) 보수력은 유의적으로 증가하였다(p<0.05). 관능특성 변화에서 도가니육, 보섭육 및 삼각살은 건조숙성기간이 증가할수록 모든 처리구에서 연도가 증가하였다. 다즙성은 도가니육과 삼각살은 T2와 T4에서 증가하였고, 향미는 삼각살만 T2와 T4에서 증가하였다. 본 연구에서 제시된 4개의 처리구에 대한 한우 설도육의 육질 및 관능특성 분석결과 전단력, 보수력 및 연도가 모두 향상되었으며 특히 처리구 2 조건은 가열감량과 관능적 기호도에서 더 유리하게 작용한 것으로 나타났다. 따라서 한우 설도육은 온도와 습도를 단계적으로 상승시키면서 약 60일 이내로 하는 것이 육질, 맛과 경제성 면에서 적절할 것으로 생각된다.

본 연구에서는 시설재배와 토경(매립) 복령의 성분 분석 및 생리활성 비교를 위해 연구하였다. 일반성분 분석 결과 산소가 45~46%로 가장 많이 포함하고 있었으며 다음으로 39~41%의 탄소, 6.06~6.1% 수소, 0.21~0.22% 질소로 나타났다. 그리고 시험을 실시한 복령 모두에서 황 성분은 발견되지 않았다. 시설 및 토경 재배 복령을 ICP 분석법으로 11종의 무기질을 분석한 결과 S, Fe, Mg, Zn의 함유량은 1년차, 2년차 모두 토경 재배 복령이 시설 재배 복령보다 많았으며 특히 Fe와 Zn의 함유량은 각각 약 3.1~4.9배, 3.6~3.9배 높았다. 50% 에탄올 복령 추출물의 DPPH와 ABTS radical 소거활성과 FRAP 방법을 실행하여 항산화 효과를 알아보았다. 복령 추출물 10 mg/ml의 농도에서 시설 및 토경 재배 복령의 DPPH IC50 값은 1년산 시설 재배(8.601mg/mL), 1년산 토경 재배(12.85mg/mL), 2년산 시설 재배(1.23mg/mL), 2년산 토경 재배(1.18 mg/mL)로 나타났으며 ABTS IC50값은 1년산 시설 재배(15.85mg/mL), 1년산 토경 재배(14.59 mg/mL), 2년산 시설 재배(3.9 mg/mL), 2년산 토경 재배(14.92 mg/mL)로 계산되었다. 연구에 사용한 복령의 항산화 활성은 농도 의존적인 증가를 보였고 2년산 시설 재배 복령이 가장 높은 항산화 활성을 나타냈다. FE-SEM을 이용하여 복령 입자의 초미세구조를 관찰한 결과 샘플간의 뚜렷한 차이점은 발견되지 않았다.

In this study, we tested Japanese trolling lines in the Jeju fishery. This fishery simulates the natural marine environment with many seabed rocks, and has been redesigned and manufactured it to be suitable for the Jeju fishery. In order to ensure that the trolling lines were deployed at the inhabitation depth of hairtails, the conditions required for the fishing gear to reach the target depth were determined for use during the experiment. The experimental test fishing was conducted at the depth of 120 m water in front of Jeju Seongsanpo and in the offshore area of Jeju Hanlim. The fishing gear used in the test fishing is currently used in a variety of field operations in Japan. However, several problems were identified, such as twisting of the line during its deployment and excessive sinking of the main line. The fishing gear was, therefore, redesigned and manufactured to be more suitable for the Jeju fishery environment. For the fishing gear to accurately reach the target depth, depth loggers were installed at the starting point of the main line and at the 250 m and 340 m points of the line. Depth and time were recorded every 10 seconds. According to the daytime positioning of hairtails in the lower water column, the target depth of the fishing gear was set at 100-110 m, which was 10-20 m above the sea floor. At a speed of 1.9 knots and with a 9 kg sinker attached, the main fishing line was deployed and catch yields at depths of 100 m, 150 m and 180 m were recorded and analyzed. When the 180 m main line was fully deployed, the time for the hairtail trolling lines to arrive at the appropriate configuration had to be 5 minutes. At this time, the depth of the fishing gear was 16-23 m above the sea floor, in accordance with the depths at which the hairtails were during the day. In addition, in order to accurately place the fishing gear at the inhabitation water depth of hairtails, the experimental test fishing utilized the results of the depth testing that identified the conditions required for the fishing gear to reach the target depth, and the result was a catch of up to 97 kg a day.

디스플레이의 화질은 중요한 성능 지표이며, 균일도는 화질을 결정하는 주요 요소들 중의 하나이다. LED 매트릭 스 디스플레이 같이 화소마다 휘도 및 색역이 다른 경우, 디스플레이 휘도 및 컬러 균일도 개선을 위한 보정 작업이 수행되어야 한다. 적용의 편리성 때문에 대부분의 경우에 균일도 보정 방법은 모든 화소의 휘도 및 색역 중 가장 낮은 값 으로 보정을 수행하는 방식으로 진행되어왔다. 하지만, 이와 같은 방법은 균일도 보정 후 디스플레이의 휘도 및 색역이 너무 많이 감소하는 단점을 갖는다. 휘도 및 색역 감소량을 최소화하는 방법의 대안은 디스플레이가 균일하게 인지되는 범위를 도출한 후, 해당 범위 내에서 휘도 및 색역이 최대가 되는 값을 기준으로 디스플레이를 보정하는 것이다. 본 논 문에서는 이와 같은 디스플레이 균일도 보정 범위를 도출하는 방법을 제안한다. 제안하는 방법은 시각 실험을 통하여 화소간 휘도 및 색의 차이가 사람의 눈에 상이하게 인지되는 기준을 도출하고, 실험 결과를 사용하여 디스플레이 균일 도 보정 범위를 정량화 한다. 제안하는 방법의 성능은 시각 실험을 통하여 검증된다. 실험을 통해 제안하는 방법이 90% 이상의 높은 정확도로 균일도 보정 범위를 정확하게 도출하는 것을 확인할 수 있었다.