Among the Additive Manufacturing (AM) technologies, the Binder-Jetting printing technology is a method of spraying an adhesive on the surface of powder and laminate layer by layer. Recently, this technique has become a major issue in the production of large casting products such as ship-building, custom vehicles and so on. In this study, we performed research to make actual mold castings and increase mechanical property by using special sand and water-based binders. For use as a mold, it has a strength of more than 3MPa and permeability. Various experiments were carried out to obtain suitable them. The major process parameters were binder jetting volume, binder types, layer thickness and heat treatment condition. As a result of this study, the binder drop quantity was measured to be about 60 pico-liter, layer thickness was 100μm and the heat treatment condition was measured about 1,000℃ and compressive strength were measured to be more than 5MPa. The optimum condition of this experiment was established through actual casting of aluminum. The equipment used in this study was a Freeforms T400 model (SFS Co., Ltd.), and the printing area of 420 * 300 * 250mm and resolution of 600dpi can be realized.

This study was designed to evaluate the objective meat qualities of Hanwoo longissimus lumborum muscle after a period of long-term storage (40 days) in which conditions similar to those under which the meat would be stored for export to the Hong Kong beef market were simulated. Twelve LL muscles were sampled from animals slaughtered the previous day at a commercial beef export abattoir and assigned to one of three groups. Each group was subjected to a different packaging condition; Shrink film packed (SFP), vacuum packed (VP), or modified atmosphere packed (MAP)(O2/60%, CO2/40%). Objective meat qualities were assessed at day 1, 7, 21 and 40 of storage. Different Packaging conditions had no noticeable influence on cooking loss significantly. However, the moisture content in both the SFP and MAP groups tended to decline in a linear manner with storage periods throughout the 40 days period. Drip loss of MAP (5.68%) group was much higher in the SFP (3.18%) and VP (2.64%) groups at storage day 40. Redness (CIE a*) of meat color responded in a significant and completely different manner to each packaging method. Redness significantly (p<0.05) and continuously increased 17.51 at day 1 to 20.41 at day 40 in VP group, while MAP linearly dropped and ultimately reached 10.6 after 40 days of aging (p<0.05), at which point the meat had a brown color. Tests of Warner-Bratzler shear force (WBSF) indicated that the tenderness levels of the ready-for-export Hanwoo LL muscles were acceptable 7 days postmortem in the SFP and VP groups, however there was no significant difference between each group. Our gathered data suggests that the packaging method selected for export determines how well the objective qualities of the beef hold up, and indicate that VP is likely the most reliable method.

Targeting Microcystin (MC), which is most abundantly detected in the North-Han River water area, we analyzed the relationship between the MC biosynthesis gene (mcyA gene), cyanobacteria cell density, and MC concentration, derived an RNA-MC conversion formula, and derived the cyanobacteria. The concentration of MC present in cells was predicted. In the North-Han River waters, the mcyA gene was found mainly at downstream sites of the North-Han River after Muk-Hyeon Stream junction, and higher copy numbers were found on average than other sites. In the Uiam Lake waters upstream of the North-Han River, the mcyA gene copy number increased at the Kong-Ji Stream point, and after September, the mcyA gene copy number decreased throughout the North-Han River waters. The expression of the mcyA gene was concentrated in the short period of summer due to the spatio-temporal difference between upstream and downstream water bodies. The mcyA gene expression level was not only highly correlated with MC concentration, but also correlated with the cell density of Microcystis aeruginosa and Dolichospermum circinale, which are known to biosynthesize MC. Six conversion formulas derived based on the RNA-MC relationship showed statistical significance (p<0.05) and exhibited high correlation coefficients (r) of 0.9 or higher. The expression level of MC biosynthesis gene present in eRNA determines the synthesis of cyanotoxin substances in water, quickly quantifies gene activity, and can be fully utilized for early warning of MC development.

지식기반사회에서 산학협력의 중요성이 지속적으로 높아짐에 따라 정부는 산학협력 관련 다양한 사업을 추진하고 있다. 하지만 정부의 많은 지원에도 불구하고 만족스러운 성과를 거두지 못하고 있어 산학협력 성과를 확산하기 위한 실증적 성과분석의 필요성이 커지고 있다. 본 연구에서는 DEA를 활용하여 LINC+ 참여 대학의 산학협력 성과를 분석하였다. CCR 모형과 BCC 모형을 활용하여 효율성 분석을 수행하였으며, 규모효율성 분석을 통해 규모수익과 비효율 원인을 파악하였다. 또한 비효율적으로 운영되는 대학에 대하여 효율성 개선목표를 제시하였다. 분석 결과 대학이 위치한 지역에 따라 LINC+ 성과의 차이가 있으며, 대학별 비효율 개선을 위한 목표들이 상이한 것으로 나타났다. 본 연구 결과는 대학의 운영 효율성 제고와 경쟁력 강화에 기여할 것으로 기대되며, LINC+의 후속 사업 계획 수립에도 활용될 수 있을 것이다.

This paper is the result of a comparative analysis of crew members' workloads using the EMG and OWAS methods according to the fishing process before and after the improvement of the operating system of the experimental vessel, with the aim of improving operational efficiency and safety work of coastal improved stow net fishing vessels. The target crew members were three people with at least five years of experience on board the same fishing vessel as the experimental vessel. After improving the operating system, such as installing a power block crane and two capstans, change the location of the ball-roller, the time required for setting and hauling work decreased (p < .01), and the evaluation results by OWAS showed that the overall workload for setting and hauling net work decreased. The results of muscle activity analysis showed a decrease in lashing anchor work (p < .01) in the case of hauling net and in anchor dropping work in the case of setting net (p < .001). It is judged that the use of ball rollers in net handling has been reduced; consequently, work safety has been improved.

본 연구에서는 양생물주기 및 보양을 하지 않은 구조체의 압축강도와 표준 양생 공시체의 압축강도를 비교 평가하였 다. 코어채취를 위해서 980x2090x200mm3 철근콘크리트 슬래브를 준비하였으며, 콘크리트 공시체 25개를 KS F 2405에 따라서 표준 양생, 20개를 구조체와 동일한 환경에서 대기중 양생을 하였다. 실험 결과, 28일 표준공시체 압축강도 대비 코어 채취 압 축강도는 약 4MPa 낮게, 대기중 양생 공시체의 압축강도는 약 7.6MPa 낮게 측정되었다. KCS에서는 양생기간의 온도가 낮을 경 우 온도보정강도를 제시하고 있으며, 실험결과로부터 제시된 값이 적정함을 확인하였다. 7일, 14일에 측정된 대기중 공시체의 압축강도는 코어채취 공시체의 압축강도와 유사하였지만, 28일 압축강도는 현저하게 차이가 나타났다. 초기 구조체의 초기 압축 강도 예측에 대기양생 공시체를 이용하는 것은 가능하지만, 28일 압축강도를 추측하는데 대기중 양생 공시체를 사용하는 것은 무리가 있다고 판단된다.

Sensory evaluation of shucking pressure, pressure holding time, seeding method, difference in full shucking rate in the aquaculture area and shucking oyster was performed using an ultra-high pressure oyster shucking machine. The reaching time for each target pressure is 2.2-2.4 MPa/sec in the range of 180 MPa to 240 MPa. had a rate of pressure rise. There was a difference of 0.5-1.7℃ in the range of 24-27℃ in the seawater temperature before and after the pressure treatment inside the pressure vessel, but there was no specific increase or decrease in seawater temperature. When only the shucking pressure is increased without the pressure holding time, the critical shucking pressure at which the oyster shell is opened and the flesh is peeled in the range of 200 to 220 MPa. When the critical shucking pressure is reached, the oyster sample in the closed vessel is expected to be shucked by about 40%. If there is no pressure holding time when judged only by full shucking, an increase in pressure of about 1.5 MPa is required to further shuck 3% of the oyster population. The oyster samples cultivated in the south coast of Korea were subject to full shucking under the conditions of 220 MPa shucking pressure and two minutes (120 seconds) of pressure holding time, and the difference in the pressure of the oysters according to the oyster seeding method and the farming area was minute. Finally, the condition of 220 MPa of shucking pressure and three minutes of pressure holding time was the best at 1.52 when the result of the sensory evaluation performed manually was set to 1.0. Next was 1.4 under the conditions of 220 MPa of shucking pressure and one minute of pressure holding time (60 seconds), and 1.3 under the condition of 220 MPa and two minutes of pressure holding time (120 seconds). Therefore, it is considered that the most desirable shucking conditions, considering the efficiency and sensory evaluation results, are the conditions of 220 MPa shucking pressure and two to three minutes of pressure holding time.

In the anchovy boat seine fishing boat, it is necessary to select other aquatic organisms other than live anchovies, which are the target species of catch. By making a rotating roller sorter using hydraulic pressure, the anchovy sorting amount was compared and the sorting accuracy of the rotary roller sorter, and the discharge speed of butter fish and jerry fish according to the number of roller revolutions were analyzed. The rotating roller sorter increases the weight of the sorted raw anchovy by 54%, 74% and 91.5% compared to the round bar fixed type, so it can reduce the required time by an average of 73.2%. As a result of converting the sorting accuracy to the weight of pure anchovies excluding the catch weight, the round bar fixed type was 89%; however, the average of the rotating roller sorter was 97.7%. Thus, the sorting accuracy of the rotary roller sorter was further improved by about 8.7%. The roller speed moved 7% at 300 rpm, 7.5% at 600 rpm, and 16% at 900 rpm, so butter fish were discharged overboard 10% faster than jelly fish on average. In addition, the average feed speed of butter fish and jelly fish is 1,400 mm/s when the roller rotation speed is 300 rpm, 1,480 mm/s at 600 rpm, and 1,850 mm/s at 900 rpm. A Φ58 mm roller rotates once it moved about 1.23 mm. In the future, a follow-up study of quantitative evaluation is needed targeting more non-target fish species of anchovy boat seine.

동해연안의 반폐쇄성 해역인 영일만에서 고주파해양레이더(HF-Radar)로 측정된 표층 해수유동 자료를 활용하여 1)바람과 수평 적인 해수유동 사이의 상관성을 파악하고 2)수직적으로 조밀한 간격의 층별 수온시계열 자료와 연계하여 수평적 및 수직적 해수유동의 특성을 파악하였다. 시계열 관측기간 중 영일만 해역의 전역에 걸쳐 북동풍이 우세하게 나타났을 때 표층부터 저층까지 수온의 급격한 상승이 동반되었다. 또한 표층의 장주기 해수유동에서도 풍향과 유사한 방향의 흐름이 뚜렷하게 관측되었다. 바람과 표층 해류 사이의 지 연상관 분석을 통해 영일만에 북동풍의 바람이 불기 시작하여 일정하게 지속된다면 짧은 시간(1 ~ 2시간) 내에 남서향의 표층 해류가 발 생되는 것을 확인하였다. 일평균된 장주기 표층 해류로부터 수렴과 발산을 계산하였고 이를 통해 층별 관측지점에서 발생한 두 번의 급 격한 저층수온 상승이벤트가 모두 영일만의 북동풍과 연관된 표층 해수(상대적 고온수)의 수렴(침강) 현상으로 인해 나타난 것으로 판단 하였다.

생물환경조절학회지 31권 4호에 게재된 논문의 사사가 잘못 기재되어 있어 바로 잡습니다.

생물환경조절학회지 30권 3호에 게재된 논문의 그래프를 수정합니다.

모국어와 한국어를 번역하는 능력은 한국어 전공 외국인 학습자들에게 요구되는 핵심 역량이지만 지금까 지 다소 소홀하게 다루어진 경향이 있었다. 이에 본 연구는 외국인 학습자 대상 번역 수업의 내실을 기한다 는 목적에 따라 한국현대시 번역 활동의 한국어 교육적 의미를 확인하고 베트남 대학생의 번역 능력 향상을 위한 교육적 시사점을 도출한다. 번역이란 원문의 의미와 가치에 대한 폭넓은 ‘이해’를 바탕으로 번역문을 ‘집필’하는 작업으로 진행된다. 하지만 이 연구는 논의를 명확하게 하기 위하여 원문 텍스트의 이해가 번역 결과물에 주는 영향력을 확인하고 학습자가 정확하게 번역하게 도울 원문 이해 교육 내용을 도출하는 데에 초점을 맞추었다. 이 연구에서 제시한 시사점은 베트남인 학습자 80명이 <사평역에서>(곽 재구, 1983) 번역한 결과를 분석 고찰한 결과인바, 향후 대학에서 외국인 학습자 대상의 한국어 번역 강의 를 개설할 때 실질적으로 도움이 될 수업 내용을 안내할 것으로 기대한다.

The quality and antioxidant characteristics of apios (Apios americana Medikus) according to different harvest periods and steaming treatment were investigated. The quality and antioxidant characteristics of apios were significantly different depending on harvest periods. Total starch contents was higher in 1st harvesting period as 62.32 g/100 g than other harvesting period. The water binding capacity and water solubility index was higher in 1st harvesting period as 228.65 and 11.29% than other harvesting period. The sucrose and total free sugar contents were 3.64~8.67 and 4.49~9.54 g/100 g, respectively. Total polyphenol and flavonoid contents of apios was the highest 2nd and 4th harvesting period at 4.21 mg GAE/g and 611.11 μg CE/g, respectively. DPPH radical scavenging activity was higher in 1st harvesting period as 84.96 mg TE/100 g than other harvesting period, and decreased as the harvest periods were delayed. ABTS radical scavenging activity and ferric-reducing antioxidant power were 43.81~47.89 mg TE/g and 231.20~264.07 mM/100 g, and increased to 50.58~51.44 mg TE/g and 342.55~384.29 mM/100 g after heat treatment. As a result, it is thought that studies on change of quality and physicochemical characteristics according to cultivation characteristics should be preceded for cultivation stability of apios.

This study was conducted to identify the distribution characteristics of the impervious area in urban watersheds and to reduce the deviation of the impervious area ratio that occurs depending on the degree of construction of land surface condition data. The average impervious area ratio by land use that can be applied to the calculation of the urban impervious area ratio was derived by statistically analyzing the distribution characteristics of the impervious area ratio by land use according to the urban watershed conditions. In urban watersheds, the change in impervious area ratio over the past 20 years has continuously increased in watersheds with an impervious area ratio of less than 60%, and decreased in watersheds with a high impervious area ratio of 60% or more. The average impervious area ratio by land use applicable to the land use technique is “Residential area” 84.0%, “Residential and commercial mix” 93.6%, “Commercial and business facilities” 89.8%, “Industrial land” 84.8%, “Public land” 47.3%, “Transportation facility” 93.3%, “Urban revitalization facility” 61.1%, “Bare land” 17.6%, “Special area” 11.4%, “Forest and open space” 3.5%, “Rivers and lakes” 9.2%. As a result of examining the adequacy of the average impervious area ratio by land use, the difference between the calculated value of the impervious area ratio using land use techniques and the actual impervious area ratio of the biotope map ranged from -3.0%p to 2.6%p at the significance level of 95%. In addition, when the watershed condition is applied, the difference ranged from -2.3%p to 1.7%p. By applying the average impervious area ratio by land use derived in this study, it was found that the impervious area ratio of the target urban watershed could be calculated within a deviation of ±3%p.

Low-cost particulate matter (PM) sensors based on the light scattering principle measure the concentration of particles by the change of scattering intensity after light is irradiated onto the particles. It has been reported that when the relative humidity is high, water vapor may cause the expansion of airborne particles and affect the accuracy of the light scattering method for PM measurement, but it has also been shown that the effect of humidity is not significant or even negligible. Therefore, to determine the effect of humidity on the Plantower PMS7003 light scattering sensor, in this study, a BAM1020 (Beta Attenuation Monitoring) was installed alongside to continuously monitor the ambient atmospheric PM concentration for approximately four weeks. The sensors collected data at 10-minute intervals, resulting in a 1-hour average for comparative analysis. To accurately measure humidity, the performance of the Arduino + DHT22 humidity sensor was also pre-evaluated using a series of saturated salt solutions. The humidity was grouped into five intervals and analyzed by visual analysis. The results confirmed that there was no significant correlation between PM2.5 differences and humidity, which were randomly and uniformly distributed around the mean. However, since in the very low and high concentration ranges based on the beta-ray monitor measurements, the difference between the light scattering sensor PM10 measurement and the reference value is much larger than the difference between the PM2.5 and the reference value., there is an additional need to investigate the appropriate correction method for dust season or PM10. The results show that the outcomes of the light scattering sensor are more influenced by particle size and concentration than by humidity.

본 연구에서는 한국 남해안의 해상가두리에서 북방전복 Haliotis discus hannai 부착생물의 종류 와 밀도에 관한 자료의 축적과 부착생물 제거에 따른 영향을 평가하고자 하였다. 해상가두리에 서 북방전복의 부착생물은 굴, 태형동물, 따개비가 우점하였으며, 이들의 평균 부착생물 면적비 는 약 57.5%였다. 성장률과 간췌장의 건강도는 대조구에 비해 부착생물 제거구에서 좋은 결과 를 보였다. 따라서 전복의 부착생물 제거는 개체의 성장과 출하 시 상품성 향상을 위해 필요한 것으로 판단된다.

작물 생육 진단에 있어서 군락 엽면적과 군락 피복은 주한 요소 이다. 최근에는 이러한 측정을 디지털 카메라를 활용하여 RGB 식생지수로 작물 생육을 측정하고 있다. 본 연구는 밀 재배 기간 카메라의 노출 값을 다르게 설정하여 RGB 컬러 식생 지수와 군락 엽면적지수 및 군락피복에 대해 평가하였다. 군락 엽면적, 군락 피복 및 디지털 영상 측정은 출수 16일전부터 출수 후 25일까지 하였다. 일출 후 30분 이내에 촬영하였다. 노출 값은 셔터 속도를3 수준(1/60s, 1/340s, 1/640s)으로 하였다. RGB 컬러 식생지수 분석은 파이썬으로 하였다. 실제 군락 엽면적과 군락 피복간에는 정의 상관관계(r2 =0.94)를 보였다. 군락 피복 이미지의 ExG, GLI, NGRDI, ExG-ExR, MExG, TGI, MNGRD 및 MExG-CIVE는 군락 엽면적 지수와 및 군락 피복과는 정의 상관관계를 보였다. 그러나 CIVE와 ExR은 부의 상관관계를 보였다. 본 연구 결과 1/640s 가 1/60s와 1/320s에 비하여 노출이 높게 설정된 것으로 보였다. 또한, 토양과 녹색 영역을 분리하는데 있어서 너무 어린 시기 보다는 출수 전이 가장 잘 분리되었다. 따라서 야외에서의 다양한 광 조건에서는 과도한 노출보다는 광 간섭을 줄이는 기술과 함께 작물의 생육 시기와 기상환경을 고려하여 노출 값이 설정되어야 할 것이다.

고분자 전해질 막 연료전지(polymer electrolyte membrane fuel cell, PEMFC)의 핵심 구성요소 중 하나인 고분자 전해질 막(polymer electrolyte membrane, PEM)은 수소이온을 애노드(anode)에서 캐소드(cathode)로 이동시키는 전해질의 역 할 및 연료의 투과를 막는 분리막으로서의 역할을 수행하며 PEMFC의 성능 및 효율을 결정짓는 핵심 소재이다. 현재 나피온 (Nafion®)으로 대표되는 과불소화계 전해질 막이 높은 수소이온 전도도 및 화학적 안정성으로 인해 상용화 되었지만, 높은 생 산비용과 구동 시 환경오염 물질이 배출된다는 문제점을 갖고 있다. 이를 대체할 PEM 소재로써 고분자의 구조 조절 및 개질 과정이 용이한 다양한 종류의 탄화수소계 고분자가 제시되고 있지만, 실제 PEMFC에 적용되기 위해서는 성능 및 내구 특성 을 개선해야 하는 과제가 남아있다. 이에 본 총설은 탄화수소계 PEM의 성능 및 내구 특성을 향상시키기 위해 1) 가교 구조 를 도입한 가교 막 개발, 2) 무기 첨가제 도입을 통한 유⋅무기 복합 막 개발 및 3) 다공성 지지체를 활용한 강화 복합 막을 개발하는 연구에 대해 살펴보고자 한다.

Objectives of this study were to propose an optimal fertilization method of Chlorella and to evaluate its effects on growth of green pepper. Chlorella fusca strain was propagated and used in the experiment. As for treatment, drenching method (DM), foliar fertilization (FF), drench and foliar fertilization combination (DM + FF), and untreated control (CO) were used. Plant height of green pepper was higher in the CO treatment than in chlorella fertilized treatments. Chlorella fertilization inhibited stem growth of green pepper. Chlorophyll contents of green pepper leaves were higher in the DM + FF treatment. Yields were the higher in DM and DM + FF treatments than in other treatments. Vitamin C content was the highest in the DM + FF treatment. These results showed that Chlorella fertilization could increase the growth, yield, and bioactive substance content of green pepper. The Chlorella fertilization method could be applied to other crops. By applying this technology to the farmer, it is possible to increase income and supply healthy and safe high-quality agricultural products to consumers.

The effect of Cr and Mo contents on the hydrogen embrittlement of tempered martensitic steels was investigated in this study. After the steels with different Cr and Mo contents were austenitized at 820 °C for 90 min, they were tempered at 630 °C for 120 min. The steels were composed of fully tempered martensite with a lath-type microstructure, but the characteristics of the carbides were dependent on the Cr and Mo contents. As the Cr and Mo contents increased, the volume fraction of film-like cementite and prior austenite grain size decreased. After hydrogen was introduced into tensile specimens by electrochemical charging, a slow strain-rate test (SSRT) was conducted to investigate hydrogen embrittlement behavior. The SSRT results revealed that the steel with lower Cr or lower Mo content showed relatively poor hydrogen embrittlement resistance. The hydrogen embrittlement resistance of the tempered martensitic steels increased with increasing Mo content, because the reduction in the film-like cementite and prior austenite grain size plays an important role in improving hydrogen embrittlement resistance. The results indicate that controlling the Cr and Mo contents is essential to achieving a tempered martensitic steel with a combination of high strength and excellent hydrogen embrittlement resistance.