검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 127

        81.
        2015.11 구독 인증기관·개인회원 무료
        느타리버섯에 주로 사용되는 영양원의 수입국별 성분분석 및 재배가능성을 검토하였다. 첫째로 수입국별 영 양원의 성분분석 결과, 중금속 농도는 불검출되거나 미량 조사되었고, 면실박의 총질소함량은 호주산에서 6.22%로 중국산이나 미국산보다 높았으며, 비트펄프는 수입국별 pH 및 화학성이 모두 대등하였다. 둘째로 영 양원별 물리성을 조사한 결과, 압력이 증가할수록 이집트산 비트펄프의 보수력이 높았고, 면실박의 경우 400hpa 및 500hpa에서 미국산의 용적수분함량이 가장 높았으며, 배지재료별 압력에 따른 가비중의 변화는 나 타나지 않았다. 셋째로 재료별로 혼합한 배지의 성분분석은 T2처리구에서 pH 5.51로 가장 높고, 총질소함량 도 2.45로 가장 높았으며, C/N율은 대조구가 28.18로 가장 높았다. 마지막으로 혼합배지에 따른 생육특성 및 수량성 조사 결과 초발이소요일수 및 생육일수는 각각 5일과 4일로 T2보다 짧았고, 수량성 및 생물학적 효율 은 T2를 제외한 처리구에서 모두 대등하였다. 이상의 결과 호주산 면실박을 제외한 재료들을 재배에 사용할 수 있을 것으로 판단되며, 추후 수입국에 따른 계절별 수량성을 검토하여 배지의 안전성을 확보하여야 할 것 으로 판단되었다.
        82.
        2015.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study was conducted to reduce contamination ratio of oyster mushroom bottle cultivation. The optimalconditions of substrate sterilization for reducing of contamination ratio were at 121oC for 90min. In addition, UV-C irradiation isgood for lower contamination ratio to continue over 6 hours at cooling and inoculation room after sterilization. Thecontamination ratio and density of microorganisms of substrate were showed 0% after sterilization at 121oC for 90min.Trichoderma sp., main pathogen of mushrooms, was detected from substrate after sterilized during 2 or 4 hours at 101oC and 105oC,respectively. The amount of electricity used was the lowest at 121oC for 90min than that of other sterilization conditions. The UV-Cirradiation treatment was used UV-C lamp(40 watts) in the inoculation room(56m3). The density of bacteria did not detected after UV-C irradiation for 6 hours. And the death ratio of bacteria and Trichoderma sp. was 99.9% after UV-C irradiation for 6 hours. However,in the same UV-C irradiation time, the death ration of Cladosporium sp. was 90.9%. Therefore, the death ratio of fungi was lower thanthat of bacteria at the same UV-C irradiation treatment.
        4,000원
        83.
        2015.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The study was conducted to investigate the effects of post-incubation period and temperature treatment conditionsduring incubation on the uniform primordia formation and cultural characteristics of oyster mushroom (Pleurotus ostreatus). Threekinds post-incubation period; 25, 30, 35 days and control were applied for 30 days while two kinds incubation roomtemperature 23oC and 26oC and control were used 20oC. The substrate temperature during pre-incubation was of ‘Suhan No. 1’and ‘Gonji No. 7’. Oyster mushroom varieties tended to increase between 24oC to 26oC at 11 to 15 days after inoculation andthen they were maintained in treatment temperature during post -incubation period. The CO2 occurrence was at the highest at6,500ppm for ‘Suhan No. 1’ and 5,800ppm for ‘Gonji No. 7’ at the time of the highest temperature increase. The ratio of un-uniformal primordia formation and the ratio of non-commercial fruit body were reduced by 40%, 10.5%, respectively comparedto control for ‘Suhan No. 1’ when in the post-incubation temperature was 26oC, and incubated for 10days and 15daystreatment. Also, ‘Gonji No. 7’ was reduced by 19%, 9.5%, respectively when in the post-incubation temperature was 26oC, andincubated for 10 days treatment. Therefore, the higher post-incubation temperature of room and longer post-incubation periodresulted in the higher percentage of primordia formation of two cultivars.
        4,000원
        84.
        2015.06 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        The effect of adding Ca on the microstructural and mechanical properties of as-cast Mg-11Li-3Zn-1Sn(wt%) alloys were investigated. Mg-11Li-3Zn-1Sn-0.4Mn with different Ca additions (0.4, 0.8, 1.2 wt%) were cast under an SF6 and Co2 atmosphere at 720 oC. The cast billets were homogenized at 400 oC for 12h and extruded at 200 oC. The microstructural and mechanical properties were analyzed by OM, XRD, SEM, and tensile tests. The addition of Ca to the Mg-11Li-3Zn-1Sn-0.4Mn alloy resulted in the formation of Ca2Mg6Zn3, MgSnCa intermetallic compound. By increasing Ca addition, the volume fraction and size of Ca2Mg6Zn3 with needle shape were increased. This Ca2Mg6Zn3 intermetallic compound was elongated to the extrusion direction and refined to fine particles due to severe deformation during hot extrusion. The elongation of the 0.8 wt% Ca containing alloy improved remarkably without reduction strength due to the formation of fine grain and Ca2Mg6Zn3 intermetallic compounds by Ca addition. It is probable that fine and homogeneous Ca2Mg6Zn3 intermetallic compounds played a significant role in the increase of mechanical properties.
        4,000원
        85.
        2014.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        표고 톱밥배지 재배시 녹색LED 광량에 따른 생육특성 분석 결과 5 umol ·m -2 · s -1에서 3주기 기준 배지당 자실체 의 수량은 239 g으로 형광등 202 g 대비 18% 증수효과가 있었으며, 자실체 폴리페놀 함량은 형광등 107 ppm에 대 비 78.4 ppm으로 27% 정도 낮았지만 에르고스테롤 함량 은 형광등 145 ppm 대비 307 ppm으로 2.1배 높은 함량을 보였다. 전력소모량은 형광등 대비 15.9%의 에너지 절감 율을 보였으며, 전등의 에너지 효율이 77.5%로 가장 컸다.
        4,000원
        86.
        2014.11 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        In this research, magnesium powder was prepared by gas atomizing. Refinement behaviors of magnesium powder produced under different conditions were investigated using a mechanical milling (attrition milling) process. Analyses were performed to assess the characterization and comparison of milled powder with different steel ball sizes and milling times. The powders were analyzed by field emission scanning electron microscope, apparent density and powder fluidity. The particle morphology of the Mg powders changed from spherical particles of feed metals to irregular oval particles, then plate type particles, with an increasing milling time. Because of the HCP structure, deformation occurs due to the existence of the easily breakable C-axis perpendicular to the base, which results in producing plate-type powders. An increase in ball size and the impact energy of the magnesium powder maximizes the effect of refinement. Furthermore, it is possible to improve the apparent density and fluidity according to the smoothness of the surface of the initial powder.
        4,000원
        87.
        2014.11 KCI 등재 구독 인증기관 무료, 개인회원 유료
        There has been an increasing demand for introducing a base isolation system to secure the seismic safety of a nuclear power plant. However, the design criteria and the safety assessment methodology of a base isolated nuclear facility are still being developed. A performance based design concept for the base isolation system needs to be added to the general seismic design procedures. For the base isolation system, the displacement responses of isolators excited by the extended design basis earthquake are important as well as the design displacement. The possible displacement response by the extended design basis earthquake should be limited less than the failure displacement of the isolator. The failure of isolators were investigated by an experimental test to define the ultimate strain level of rubber bearings. The uncertainty analysis, considering the variations of the mechanical properties of isolators and input ground motions, was performed to estimate the probabilistic distribution of the isolator displacement. The relationship of the displacement response by each ground motion level was compared in view of a period elongation and a reduction of damping. Finally, several examples of isolator parameters are calculated and the considerations for an acceptable isolation design is discussed.
        4,000원
        88.
        2014.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        잣버섯의 조회분은 6.3%, 조단백은 19.1%, 조지방은1.9%, 조섬유는 8.9%로 나타났다. 잣버섯 및 송이버섯,느타리버섯의 향기성분을 SPME로 분석한 결과 잣버섯의경우 휘발성향기화합물 중 3-Octanone, 3-Octanol 및 1-Octanol이 있었고, 송이버섯은 1-Octen-3-ol이 있었으며,느타리버섯은 1-Octene이 존재하였다. 잣버섯의 에르고스테롤 함량은 145.9ppm로 느타리버섯의 43.3ppm에 비해3배 이상 함유되어 있는 것으로 밝혀졌다.
        3,000원
        90.
        2013.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Structures in a nuclear power system are designed to be elastic even under an earthquake excitation. However a structural component such as an isolator shows inelastic behavior inherently. For the seismic assessment of nonlinear structures, response history analysis should be performed. In this study, the response of base isolation system was analyzed by response history analysis for the seismic performance assessment. Firstly, several seismic assessment criteria for a nuclear power plant structure were reviewed for the nonlinear response history analysis. Based on these criteria, the spectrum matched ground motion generation method modifying a seed earthquake ground motion time history was adjusted. Using these spectrum matched accelerograms, the distribution of displacement responses of the simplified base isolation system was evaluated. The resulting seismic responses excited by the modified ground motion time histories and the synthesized time history generated by stochastic approach were compared. And the response analysis of the base isolation system considering the different intensities in each orthogonal direction was performed.
        4,000원
        91.
        2012.10 구독 인증기관·개인회원 무료
        포도 천공성 해충은 줄기 속으로 잠입하여 가해하기 때문에 약제에 의한 방제가 어려움이 있어 외부기생성 천적인 개미침벌을 이용한 방제기술을 개발하기 위한 기초연구를 수행하였다. 단위생식을 하는 개미침벌의 수컷 비율은 약 15% 수준이었다. 방제효율을 높이기 위해 적정 투입시기 결정을 위해 공격율이 높은 대상 해충의 발육단계를 조사한 결과 성장 중의 유충은 매우 활동적으로 개미침벌의 공격에 자신의 몸을 물어뜯어 폐사하는 경우로 번식성공율이 매우 낮아 전용과 번데기시기에 투입하는 것이 가장 높은 성공률을 나타내어 대량사육시 적용가능한 성장태로 사료된다. 산업화를 위한 저장시험에서 12℃의 경우 60일, 8℃의 경우 30일까지 생존율을 90% 수준으로 높게 유지할 수 있었다. 또한 먹이 탐색을 위해 외부에 노출될 수 있는 개미침벌 성충에게 독성이 낮은 친환경 유기농자재를 선발하였다.
        92.
        2012.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this study, we mainly focus on the study of densification of gas-atomized Cu-50 wt.%In-13 wt.%Ga alloy powder without occurrence of crack during the forming process. Cu-50 wt.%In-13 wt.%Ga alloy powder was consolidated by sintering and rolling processes in order to obtain high density. The phase and microstructure of formed materials were examined by X-ray diffraction (XRD), scanning electron microscopy (SEM) and optical microscopy (OM), respectively. Warm rolling using copper can result in the improvement of density. The specimen obtained with 80% of rolling reduction ratio at using cooper can have the highest density of .
        4,000원
        93.
        2012.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        이 연구에서는 추계학적 그린함수법에 의한 단층 모델을 이용하여 지진파를 합성하고 단층 파라미터의 변화에 의한 지반 운동의 차이를 평가하였다. 모멘트 규모 6.5의 단층을 예제로 선정하였고 아스페리티 면적의 통계값을 이용하여 슬립의 분포를 모델링하였다. 평가를 위해 고려된 단층 파라미터들은 진원의 위치, 전단파 속도 대비 파열 전파속도 비, 상승시간, 절점주파수 그리고 고주파감쇠 필터 등 이었다. 요소지진원에 적용된 파라미터들은 구조권역별 특성이 다른 지역의 값을 사용하였고 다른 파라미터들은 발생 가능한 임의의 값을 사용하였다. 생성된 지반운동 시간이력으로부터 응답스펙트럼을 작성하였으며, 파라미터의 값을 달리하여 비교하였다.이로부터 각각의 단층파라미터에 의해 영향을 받는 주파수 구간 및 스펙트럼 가속도의 차이를 평가하였다.
        4,000원
        94.
        2011.12 구독 인증기관 무료, 개인회원 유료
        After cultural policies of Japanese imperialism with Samil movement-Korea's Independence Movement against Japanese colonial rule- in 1919 as a momentum, sports activities began to become universal socially. According to this, the necessity of the organiza
        5,400원
        95.
        2011.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        느타리버섯 수확후 배지의 가축사료화가 가능하도록 주재료로 콘코브를 사용하여 적합한 영양원을 선발하고자 하였다. 시험에 사용된 영양원 가운데 질소함량은 채종박(7.6%)>케이폭박(6.4%)>밀기울(2.7%)순이고, 조지방함량은 밀기울(2.7%)>케이폭박(2.4%)>채종박(1.3%)>면실박(0.8%)로 나타났다. 영양원별 혼합배지의 이화학적 특성결과 C/N율은 18~20, 용적밀도 0.27~0.28g/cm3, 공극률 73.1~74.8로 처리간의 차이가 없었으며, 병당 수량은 케이폭박 첨가구(케이폭박 단용, 면실박+케이폭박(1:1) 혼용, 케이폭박+밀기울(1:1) 혼용)가 153~158g으로 대조구(면실박, 150g)와 차이가 없는 것으로 나타났고, 그러나 채종유박은 초발이 소요일수도 1일 늦고 수량도 상대적으로 낮은 것으로 나타났다. 케이폭박 처리구의 수확후 배지의 사료적 가치를 분석결과 58.3%로 면실박보다 높은것으로 나타났다.
        3,000원
        96.
        2011.11 구독 인증기관·개인회원 무료
        병재배 느타리버섯 생육에 미치는 LED혼합광의 영향을 구명하기 위하여, 형광등과 무광처리구를 대조로 청색광+백색광, 녹색광+백색광, 청색광+적색광, 녹색광+청색광, 녹색광+적색광을 처리하여 실험을 수행하였다. 초발이 이후 각각의 혼합광원을 조사한 결과 갓의 색도는 형광등 대비 모든 처리구에서 낮아지는 경향이었다. 유효경수는 청색광+백색광, 청색광+적색광, 녹색광+청색광 처리구에서 형광등처리구와 대등하였으며, 갓직경, 갓두께, 대길이의 경우 녹색광+적색광 처리구를 제외한 모든 처리구에서 형광등과 대등한 결과를 나타내었다. 수량성은 형광등처리구 대비 청색광+백색광, 녹색광+백색광, 청색광+적색광, 녹색광+청색광에서 모두 대등한 결과를 나타내었고, 변이계수는 형광등 처리구 보다 청색광+백색광, 녹색광+백색광, 청색광+적색광, 녹색광+청색광에서 낮아 균일도가 높았다. 상품수량은 청색광+백색광에서 134g으로 가장 많았고, 상품화율도 84%로 가장 높았다. 갓의 파손율은 녹색광+청색광에서 22%로 가장 낮았으며, 청색광+백색광과 녹색광+청색광이 각각 24%로 그 다음으로 작았고, 형광등 및 녹색광+백색광에서 36%로 가장 높았다. 이상의 결과 갓색도가 진하고, 상품화율이 가장 우수하고, 파손율이 가장 낮은 청색광+백색광이 느타리버섯 재배에 적합하였다.
        97.
        2011.11 구독 인증기관·개인회원 무료
        큰느타리버섯은 최근 생산량이 증가하여 느타리버섯과 함께 주요 버섯으로 자리매김을 하는 추세이다. 또한, 비교적 단단하여 저온저장기간이 30일 이상으로 유럽까지 지속적으로 수출되고 있다. 반면, 장기 저온 기간 후 현지에서 갈변으로 수출에 어려움이 있어 수확 후 관리에 관한 연구가 요구된다. 이에 전국 20여 농가를 방문하여 수확 후 관리 현황을 조사하였고, 포장형태에 따른 저온 저장기간 중 품질변화를 분석하였다. 저장온도와 포장형태에 관계없이 저장기간이 길수록 중량감모율은 점차 증가하였고, 갓신장율은 0℃에서는 저장 28일까지 증가하다 다소 감소하였고, 4℃에서는 배지부착형태가 저장 38일에 10%까지 증가하였다. 자실체의 물성 분석 결과, 경도는 0℃에서는 저장 38일까지 감소하였고, 4℃에서는 배지부착형태가 저장 24일이후 급격한 감소를 보였다. 탄성은 모든 처리에서 24일 이후 감소하여 약 90%를 나타내었다. 저장기간 중 세균과 곰팡이의 밀도 변화는 모든 처리에서 38~42일 이후에 급격한 증가를 보였다. 이상의 결과, 0℃ 저장시는 배지부착 개체형이, 4℃에서는 배지제거형이 42일까지 판매가능한 신선도가 유지되었다. 계속적으로 저장기간 중의 갈변을 억제할 수 있는 소포장 방법을 개발하여 수출증대에 기여하고자 한다.
        98.
        2011.07 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        In this paper, high temperature oxidation behavior of newly developed alloys, Ti-6Al-4Fe and Ti-6Al-1Fe, is examined. To understand the effect of Fe on the air oxidation behavior of the Ti-Al-Fe alloy system, thermal oxidation tests are carried out at 700˚C and 800˚C for 96 hours. Ti-6Al-4V alloy is also prepared and tested under the same conditions for comparison with the developed alloys. The oxidation resistance of the Ti-Al-Fe alloy system is superior to that of Ti-6Al-4V alloy. Ti-6Al-4V shows the worst oxidation resistance for all test conditions. This is not a result of the addition of Fe, but rather it is due to the elimination of V, which has deleterious effects on high temperature oxidation. The oxidation of the Ti-Al-Fe alloy system follows the parabolic rate law. At 700˚C, Fe addition does not have a noticeable influence on the amount of weight gain of all specimens. However, at 800˚C, Ti-6Al-4Fe alloy shows remarkable degradation compared to Ti-6Al-1Fe and Ti-6Al. It is discovered that the formation of Al2O3, a diffusion resistance layer, is remarkably hindered by a relative decrease of the α volume fraction. This is because Fe addition increases the volume fraction of β phase within the Ti-6Al-xFe alloy system. Activities of Al, Ti, and Fe with respect to the formation of oxide layers are calculated and analyzed to explore the oxidation mechanism.
        4,000원
        99.
        2011.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 느타리, 노랑느타리, 분홍느타리, 버들송이의 건조분말을 이용하여 두부에 적합한 첨가량을 구명하고자 수행되었다. 버섯 첨가량에 따른 두부수율은 대조(무첨가)구에 비해 느타리 3~12%, 노랑느타리 3, 6%, 분홍느타리 3, 6%, 버들송이 3, 6% 첨가시에 수율이 높았고, 버들송이는 9%이상 첨가시 고형이 되지 않았다. 경도는 느타리버섯 3, 6%, 노랑느타리 3%, 분홍느타리 3%, 버들송이 3% 첨가시에 높았다. 버섯의 첨가량이 많을수록 명도는 낮아졌으며, 적색도는 분홍느타리 첨가비율이 높을수록 증가 하였지만 노랑느타리는 황색도가 증가하지 않았다. 버섯두부의 기호도조사결과 느타리버섯은 6~12%, 노랑느타리버섯은 3%, 분홍느타리 3%, 버들송이 3, 6% 첨가시 기호도가 우수한 것으로 나타났다. 이상의 결과 수율과 경도가 높고 기호도가 우수한 두부에 제조에 적합한 버섯의 적정 첨가량은 느타리버섯 6%, 노랑느타리, 분홍느타리, 버들송이 각3%로 판단된다.
        4,000원
        100.
        2009.12 KCI 등재 구독 인증기관·개인회원 무료
        주로 리그닌을 분해하여 나무에 기생하는 백색부후균은 순수분리 및 균사체배양이 비교적 쉽게 이루어지며, 각종 난 분해성 물질을 비특이적으로 분해할 수 있는 특성 갖고 있다. 이러한 특성을 산업적으로 활용하고자 19종 22균주에 대하 여 Congo Red 등 5종의 염료에 따른 탈색율을 비교한 결과 를 보고하고자 한다. 기본배지 PDB는 pH 4.8~5.0, YPL배 지는 pH5.7~5.9로 염료종류별 차이는 없었고, PDB배지에 첨가한 염료종류별 탈색율은 Congo Red와 Bromophenol Blue에서 우수하였고, YPL배지의 경우는Congo Red, Methylene Blue, Bromophenol Blue에서 우수하여 YPL을 기본배지로 사용하는 것이 보다 광범위한 염료를 분해 할 수 있었다. 다양한 염료에서 탈색율이 우수한 유관버섯 등 3종 을 선발하였으며 앞으로 한계염료농도구명 및 산업적 활용 을 위한 계속적인 연구를 추진할 계획이다.
        1 2 3 4 5