In this study, using the developed pilot device, an experiment was conducted with groundwater according to the calcium carbonate concentration and silica concentration for a certain period of time to determine the degree of RO membrane contamination according to water quality. In addition, using wastewater with severe fouling of raw water, the treatment efficiency is compared through an experiment with a pilot device, the operation progress is evaluated for the scale effect, and the stability and convenience of the developed product are considered.

A Cu-15Ag-5P filler metal (BCuP-5) is fabricated on a Ag substrate using a high-velocity oxygen fuel (HVOF) thermal spray process, followed by post-heat treatment (300oC for 1 h and 400oC for 1 h) of the HVOF coating layers to control its microstructure and mechanical properties. Additionally, the microstructure and mechanical properties are evaluated according to the post-heat treatment conditions. The porosity of the heat-treated coating layers are significantly reduced to less than half those of the as-sprayed coating layer, and the pore shape changes to a spherical shape. The constituent phases of the coating layers are Cu, Ag, and Cu-Ag-Cu3P eutectic, which is identical to the initial powder feedstock. A more uniform microstructure is obtained as the heat-treatment temperature increases. The hardness of the coating layer is 154.6 Hv (as-sprayed), 161.2 Hv (300oC for 1 h), and 167.0 Hv (400oC for 1 h), which increases with increasing heat-treatment temperature, and is 2.35 times higher than that of the conventional cast alloy. As a result of the pull-out test, loss or separation of the coating layer rarely occurs in the heat-treated coating layer.

In this study, the dietary fiber content of 33 kinds of agricultural products and seaweeds was compared with that of raw products after heat treatment. To verify the total dietary fiber analysis method, the recovery rate was reviewed by measuring the total dietary fiber content for 4 standard certified substances. As a result, the recovery rate of the analysis value for the true value was 98.8%~103.1%, which was judged to be reliable. The total dietary fiber of vegetables ranged between 0.61~5.36 g/100 g for raw vegetables and 0.55~4.84 g/100 g for heat-treated vegetables. Among the 24 kinds of vegetables used in the analanalysis, the total dietary fiber content of heat-treated Korean radish (3.13 g/100 g) was the highest compared to that of raw radish (0.61 g/100 g). The total dietary fiber of beans was between 13.86~29.69 g/100 g for raw beans and 6.72~18.40 g/100 g for heat-treated beans. In particular, the total dietary fiber content of sword beans was the highest in both raw (29.69 g/100 g) and boiled (18.40 g/100 g) beans. The total dietary fiber content of the three types of seaweed was 1.93~4.85 g/100 g in raw seaweed and 0.99~5.72 g/100 g in heat-treated seaweed.

폐수는 석유 정제 산업에서만 방출되는 것이 아니고 아니라 가죽, 섬유, 페인트, 목재, 염료 가공 산업에서 또한 방출된다. 이런 산업 폐수는 중금속과 질소화합물 등 수질오염물질을 포함하고 있으며 화학적 산소요구량(COD)이 높다. 안 전한 처리를 위해 폐수에서 각종 오염물질을 걸러내는 방식이 있지만 막 기반 기술은 고효율, 저비용으로 가장 효율적인 방 법 중 하나이다. 다양한 막 중에서, 제올라이트 막은 가성비로 주목을 받고 있으며 많은 연구를 거쳤다. 본 리뷰논문은 i) 폐 수처리, ii) 미세여과막, iii) 중공사막, iv) 초여과막의 순서로 폐수처리를 위한 제올라이트 막의 최근 진척을 중점으로 다루고 있다.

본 연구에서는 건열처리를 통해 알팔파 종자에 접종된 Bacillus cereus ATCC 12480, Listeria monocytogenes ATCC SSA81, Staphylococcus aureus ATCC 6538, Escherichia coli O157:H7 ATCC 43894, Salmonella Typhimurium ATCC 14028을 발아율에 영향 없이 불활성화 시키는 조건(65oC 에서 21일, 70oC에서 16일, 75oC에서 10일, 80oC에서 7일)을 조사하였다. 알팔파 종자를 6-7 log CFU/g 수준으로 접종 하고 65, 70, 75, 80oC로 건열처리 한 후, 발아율을 확인 하였다. 알팔파 종자의 발아율은 시장에 유통되고 있는 알 팔파 새싹의 발아율 기준인 70%로 설정하였다. 알팔파 종 자에서 B. cereus는 65oC에서 21일, 70oC에서 18일, 75oC 에서 14일, 80oC에서 4일, Listeria monocytogenes는 65oC에서 21일, 70oC에서 18일, 75oC에서 12일, 80oC에서 7일, S. aureus는 65oC에서 18일, 70oC에서 18일, 75oC에서 11 일, 80oC에서 4일, E. coli O157:H7은 65oC에서 21일, 70oC 에서 18일, 75oC에서 12일, 80oC에서 6일, Sal. Typhimurium 은 65oC에서 24일, 70oC에서 22일, 75oC에서 14일, 80oC 에서 7일 이상 건열처리 하였을 때 완전히 불활성화 되었 다. 모든 균주는 65oC에서 80oC로 온도가 상승할 때 특정 온도에서 세균의 90%를 죽이는 데 필요한 시간인 D-값 (R2=0.5656−0.7957)이 유의미하게 감소하였다(P<0.05). 80oC 에서 7일간 건열처리 하였을 때 발아율이 70% 미만으로 감소하였기 때문에 75oC에서 14일간 건열처리 하는 것이 알팔파 종자의 안전성을 확보하는데 있어 가장 효과적인 방법이다. 이 연구는 알팔파 종자의 안전성을 확보하고 일 정한 품질의 새싹을 생산하는데 기초자료로 이용될 것으 로 기대된다.

본 연구는 2013년 1차 솎아베기 및 가지치기를 시행한 35년생 종가시나무 인공림을 대상으로 2014년과 2021년에 임분조사를 실시하여 임목 생장⋅형질 반응 특성을 분석하였다. 가지치기 시업임분에 대한 솎아베기 강도별 임목생장 특성을 비교 분석한 결과, 평균수관면적은 강도구가 대조구보다 유의적으로 넓으며(p<0.05), 정기생장률도 높아 흉고직경과 유사한 경향을 보였다. 가지치기 시업임분에 대한 솎아베기 처리구별 가지발 달 특성을 분석한 결과, 약도구를 제외한 모든 처리구의 지하고는 가지치기 처리구에서 대조구보다 유의적으로 높게 분석되었다(p<0.05). 고사지 발생률의 경우 가지치기 처리구에서 29.6∼36.7%, 대조구에서 40.0∼53.3%로 각각 나타났다. 활엽수 입목형질등급평가 기준에 따른 연구대상지의 형질등급 분석 결과, 1등급 입목의 비율은 가지치기 처리구에서 21.0%, 대조구에서 11.6%로 각각 나타나 유의적인 차이를 보였으며, 이로부터 가지치기 시업에 따른 임목형질개선 효과에 대한 실증적 시험연구결과를 도출할 수 있었다.

Busulfan is the most commonly used drug for preconditioning during the transplantation of hematopoietic stem cells and male germ cells. Here, we describe side effects of high doses of busulfan in male mongrel dogs. Busulfan was intravenously administered to three groups of dogs at doses of 10, 15, and 17.5 mg/kg body weight. The total white blood cell, neutrophil, eosinophil, lymphocyte, monocyte, and platelet counts steadily reduced in a dose-dependent manner following busulfan treatment. The white blood cell, neutrophil, and monocyte counts recovered after 6 weeks of busulfan treatment, however, the eosinophil, lymphocyte, and platelet counts remained unaltered. Additionally, there was one fatality in the each of the groups that were administered 15 and 17.5 mg/kg busulfan. The gross lesions included severe hemorrhage in the stomach, intestinal tracts, mesentery and urinary bladder. Microscopic investigation revealed severe pulmonary edema and hemorrhage in the lungs, and severe multifocal to coalescing transmural hemorrhage in the intestines and urinary bladder. These results indicated that treatment with busulfan at doses higher than 15 mg/kg initiates severe bleeding in the internal organs and can have fatal results.

This study aims to investigate the proper mixing treatment concentration of ozone (O3) and sucrose to preserve and extend the vase life of the cut rose flowers ‘Dominica’. The vase solution was prepared using tap water, 3% sucrose, ozone 5.5 mg L-1, and 3% sucrose with ozone 5.5 mg L-1. The vase life was the highest in the tap water and ozone treatments at 16.3 and 16.1 days, respectively. The vase life of ozone with sucrose treatment was 6.9 days, which was 9.4 days lower than that of the control. Compared to a single treatment, the vase life termination symptoms for ozone with sucrose treatment decreased petal wilting and increased bent necks. Relative fresh weight and vase solution uptake increased up to 4 days after treatment and decreased from 2 days before vase life termination. The rate of change in petal color was high in L*, a*, and b* for the sucrose treatment than after harvest, and low for the ozone treatments. The maximum relative flower size increase rates after treatment were 195% in the control, 186% in the sucrose treatment, 171% in the ozone treatment, and 155% in the ozone with sucrose treatment.

The purpose of this study is to use the hybrid steam-solvent process, because it is created in the form of water, bitumen, and water/bitumen emulsion by hot steam, so effective separation is required. Methods for separating the emulsion include a chemical separation method by adding a chemical, a separation method using an electrostatic property, a separation method using a membrane, a separation method using a microwave, and the like. Among them, the most used method is the separation method using a chemical, and it is reported that the separation efficiency of the emulsion is the best. In this study, a method for efficiently separating bitumen emulsions using a chemical separation method adding an emulsifier was investigated. In particular, technological trends in oil sand oil treatment technology were analyzed based on patent analysis.

Novel Ni- and Fe-based alloys are developed to impart improved mechanical properties and corrosion resistance. The designed alloys are manufactured as a powder and deposited on a steel substrate using a high-velocity oxygen-fuel process. The coating layer demonstrates good corrosion resistance, and the thus-formed passive film is beneficial because of the Cr contained in the alloy system. Furthermore, during low-temperature heat treatment, factors that deteriorate the properties and which may arise during high-temperature heat treatment, are avoided. For the heattreated coating layers, the hardness increases by up to 32% and the corrosion resistance improves. The influence of the heat treatment is investigated through various methods and is considered to enhance the mechanical properties and corrosion resistance of the coating layer.

막여과는 흡착, 응집 등의 폐수 처리 방법에 비교해 경제적이며, 높은 효율을 보인다는 장점을 가지고 있다. 하지 만, 막의 표면에 오염물질이 흡착하여 발생하는 막오염 현상으로 인해 막여과의 효율이 크게 줄어들게 된다. 다양한 종류의 막 중에서 세라믹 분리막은 친수성을 띄며, 화학적으로 안정되었기 때문에 오염방지에 효과적이다. 또한, 산화 그래핀 등을 활용한 복합막도 막오염을 예방하는 데 도움이 될 수 있다. 최근에는 막오염을 방지하고 시너지 효과를 얻기 위해 광촉매 분 리막이 해결책으로 제시되었다. 막 분리는 광촉매의 단점인 촉매의 낮은 재사용률을 보완할 수 있으며, 광촉매 반응은 오염을 막을 수 있다.

Probiotic strain is known to regulate the immune system by colonizing in the intestine and interact with intestinal cell receptors of lymphoid tissue. In this study, safety of Streptococcus thermophilus KCTC14471BP and silk fibroin coating effects was evaluated with respect to mucin binding abilities and immune system modulation. S. thermophilus KCTC14471BP was coated with silk fibroin by adding 1% water-soluble calcium and 0.1% silk fibroin. S. thermophilus KCTC14471BP showed the high activities of leucine arylamidase and β-galactosidase. Regarding the antibiotic resistance tests, S. thermophilus KCTC14471BP was susceptible to ampicillin, vancomycin, gentamicin, kanamycin, streptomycin, erythromycin, clindamycin, tetracycline, and chloramphenicol. S. thermophilus KCTC14471BP coated with silk fibroin showed the improved mucin binding ability from 16.1% to 71.3% and was confirmed to have no cytotoxicity against RAW 264.7 macrophage. S. thermophilus KCTC14471BP coated with silk fibroin showed dose-dependently significant increases in pro-inflammatory cytokines IL-1β, IL-6, and TNF-α. These results suggested that S. thermophilus KCTC14471BP can be expected as a promising probiotic bacteria for applications to food industries such as fermentation or functional foods.

Ti3C2Tx MXene, which is a representative of the two-dimensional MXene family, is attracting considerable attention due to its remarkable physicochemical and mechanical properties. Despite its strengths, however, it is known to be vulnerable to oxidation. Many researchers have investigated the oxidation behaviors of the material, but most researches were conducted at high temperatures above 500 oC in an oxidation-retarding environment. In this research, we studied changes in the structural and electrical properties of Ti3C2Tx MXene induced by low-temperature heat treatments in ambient conditions. It was found that a number of TiO2 particles were formed on the MXene surface when it was mildly heated to 200 oC. Heating the material to higher temperatures, up to 400 oC, the phase transformation of Ti3C2Tx MXene to TiO2 was accelerated, resulting in a TiO2/ Ti3C2Tx hybrid. Consequently, the metallic nature of pure Ti3C2Tx MXene was transformed to semiconductive behavior upon heat-treating at ≥ 200 oC. The results of this research clearly demonstrate that Ti3C2Tx MXene may be easily oxidized even at low temperatures once it is exposed to air.

The objectives of this study are to increase the contents of functional compounds and antioxidant activity obtained from ginger (Zingiber officinale Roscoe) extracts using fermentation and enzyme. The optimal conditions (1%, Aspergillus luchuensis) for extraction methods were determined through fermentation treatment of ginger (concentrations of 0.5 and 1%; Aspergillus oryzae and Aspergillus luchuensis). The quality characteristics of the ginger extract for each treatment method (HW, hot water treated; EZ, enzyme; AL, fermentation; ALEZ, fermentation and enzyme) were observed using the optimal conditions. The water-soluble index (WSI) and total sugar content of the ALEZ increased by 2.6 times and 6.5 times, respectively, compared with that of the HW. However, the sum of gingerol and shogaol contents of ALEZ were 73.9% in ratio compared with lower than that of the HW. Antioxidant contents were generally higher in ALEZ, similar to the WSI trend. Therefore, ALEZ was more effective in enhancing antioxidant activity than EZ and AL. The fermentation and enzymatic approach described in this study would be beneficial to food industries for developing ginger functional products and materials.

The dose was evaluated for the workers transporting the spent resin drums from a spent resin mixture treatment facility. The treatment technology of spent resin mixture waste based on microwave was developed to compensate for the shortcoming of the existing one. The mechanism of the facility for the treatment is divided into separation, desorption, condensation and adsorption process. The treated spent resin that has passed through the microwave reactor flows into the spent resin storage tank. As the treatment time elapses, if spent resin accumulates in the spent resin storage tank, it is moved to the drum of the volume of 200 L. The drum must be moved by the worker, in which case radiation exposure to the drum transport worker occurs. It requires the dose evaluation for drum transport workers in terms of radiation safety. Dose evaluation was performed in consideration of the change in the composition ratio and weight of the spent resin mixture, where the working time for transportation was considered from 10 to 120 minutes in 10-minute increment. In the case of 100 kg of the spent resin mixture, the dose range was derived as 4.62×10−3 – 5.90×10−2 mSv for the 100 kg of spent resin, 4.72×10−3– 5.58×10−2 mSv for the 80 kg of spent resin and 20 kg of zeolite and activated carbon, and 5.38×10−3 – 6.32×10−2 mSv for the 60 kg of spent resin and 40 kg of zeolite and activated carbon. In the case of 150 kg of the spent resin mixture, the dose range was derived as 6.83×10−3 – 8.20×10−2 mSv for the 150 kg of spent resin, 7.13×10−3 – 8.22×10−2 mSv for the 120 kg of spent resin and 30 kg of zeolite and activated carbon, and 8.28×10−3 – 8.86×10−2 mSv for the 90 kg of spent resin and 60 kg of zeolite and activated carbon. The estimated maximum doses for each weight (100 kg and 150 kg of mixture) were confirmed to be 3.16×10−1% and 4.43×10−1% of the annual average dose limit of 20 mSv for radiation workers.

Radioactively contaminated metal components from a nuclear power plant must be decontaminated to reduce the risk of radiation exposure to workers, which can be cleaned using a foam decontamination used to reduce the amount of wastewater significantly. Metal components with a fixed radioactive contamination can be effectively decontaminated using a foam consist of 0.5wt% nonionic surfactant, 0.5 M H2SO4, and 0.2 M Ce(SO4)2. However, strongly acidic wastewater is generated from the decontamination method, which contains a high concentration of the nonionic surfactant and ionic materials with radioactive nuclides. This wastewater must be treated as a stable form. In this study, an integrated process of precipitation and low pressure distillation was evaluated for the treatment of wastewater. It was confirmed that the surfactant and ionic materials were effectively removed from the wastewater through the integrated process.