Recently, there has been growing interest in harmful substances released from household items such as volatile organic compounds (VOCs) and this has increased people’s environmental awareness. In this study, adhesives and manicures were used as samples of indoor household goods and formaldehyde emission and tested over time under temperature conditions of 15oC, 25oC, 35oC, and 45oC. The small chamber method as the indoor air quality process test method was employed and used to evaluate the concentration of formaldehyde emissions. As a result, formaldehyde emissions gradually decreased over time in both tests using adhesives and manicures. The cumulative emission showed a logarithmic function over time, and the formaldehyde can be released for longer periods of time at lower temperature conditions. The logarithmic value and response time showed linear relationships, and it can be inferred that the formaldehyde was released from the sample through the first order reaction. Furthermore, the relationship between temperature and velocity constants which was determined using the Arenius linear equation showed that the reaction rate of formaldehyde can be estimated by a temperature change.

In this study, the purpose of this study was to examine the effect of twisting in the preparation of waterproofing in the process of unfolded donut-type staking method fire hoses in indoor hydrant system. The central pull-out method caused more twisting than the rolling method, and there was no significant difference in the number of twists according to the pull-out method in the case of male and female students. It was found that the time it took to untwist and prepare waterproofing was much shorter for male students. The angle valve and hose are connected, and the time to untwist and prepare for waterproofing after withdrawing the fire hose with the hose and nozzle connected was shorter than the unconnected state. In the rolling method, when a hose connected with two 15 m fire hoses was used and the angle valve-hose was connected, but the hose-nozzle was not connected, the least kinking occurred. The time to untwist and prepare for waterproofing was also the shortest. As a result, in the withdrawal method of the donut-type loaded fire hose in the indoor hydrant system, it is a rolling method rather than a central withdrawal method. With the angle valve and hose connected, unfold the fire hose with the hose and nozzle connected, if a large number of people unwind the twisted hose, the time to prepare for waterproofing can be shortened.

This study developed a scenario to understand the reaction rate and operational time according to RTI value of rate of rise detector in each type in case of fire mattress. In the results of analyzing the reaction rate and operational time of detector in each scenario, in case when installing a single detector, the elevated temperature per minute was raised to 8℃/min ~ 9℃/min. In case when installing two detectors, it was raised to 9℃/min ~ 10℃/min. In case when installing three detectors, it was raised to 10℃/min. The horizontal distance between detector and mattress was 1.8m~2.5m. Whenever the number of detectors was increased, the horizontal distance was decreased. The operational time of detector was within maximum 540 seconds and minimum 420 seconds. As the research tasks in the future, there should be the researches on the effects of reaction rate of detector on the evacuation in case of fire through the result value of RSET by setting up the latency until the detector operates, and the researches on the safety by understanding if the operational time of detector is suitable for the evaluation standard of performancecentered design.

This study analyzed the effect of time of trot on hematology and blood chemistry values of the Jeju Pony crossbreed horses that are commonly used for riding (14.1±1.4 years old, Gelding). A total of 28 parameters including vital signs as well as stress hormones such as cortisol and lactic acid levels were examined as the time of the trot exercise progressed. Vital signs such as heart rate (38.0→81.0 times/min) and respiratory rate (11.7→35.7 times/min) increased significantly within 30 minutes of exercise. However, difference in the body temperature was not observed before and after exercise. The hematology including white blood cell count (8.03→9.52×103 cells/μL), red blood cell count (5.94×103→7.23–7.32×103 cells/μL), hemoglobin levels (11.82→14.65–14.78 g/dL), and hematocrit levels (25.04→30.27%) significantly increased 30 minutes after the start of the exercise (p<0.05). The blood chemistry value of albumin (3.25→3.47 g/dL) (p<0.05) only showed a significant increase after the exercise. However, the other blood chemistry levels such as, Na+, K+, Ca2+, total CO2, creatine kinase, glucose, blood urea nitrogen, creatinine, aspartate transaminase, total bilirubin, gamma–glutamyl transpeptidase, and total plasma protein did not change. Also, cortisol and lactic acid levels did not show significant difference. The middle-aged Jeju pony crossbreed horses were not stressed by the 30-minute exercise; therefore, it can be concluded that there is no problem regarding the safety of both the rider and the animal.

목적 : 코로나19 팬데믹 기간 동안 젊은 성인을 대상으로 설문조사를 시행하여 스마트폰 사용 시간과 건성안 유병률 사이의 연관성을 평가하고자 하였다. 방법 : 대학생들을 대상으로 설문조사를 실시하였고 안구건조증은 OSDI 설문지를 이용하여 평가하였다. 안구 건조증은 OSDI 점수에 따라 경도(13~22), 중등도(23~32), 중증(33~100) 건성안으로 분류하였다. 결과 : 완성된 설문지는 총 282개를 받았지만, 기준에 맞지 않는 응답자를 제외하고 157개 설문지를 분석했다. 본 연구에서 코로나19 팬데믹 기간 동안 응답자의 77%가 스마트폰 사용 시간이 증가하였고, OSDI 을 통한 안구 건조 진단결과는 98명(62.4%)이 정상, 30명(19.1%)이 경도, 16명(10.2%)이 중등도, 13명(8.3%)이 중증인 건성안으로 밝혀졌다. OSDI는 스마트폰 사용시간 증가와 유의한 상관관계를 보였다(r=0.241, p=0.012). 결론 : 건성안 유병률은 157명 중 37.6%로 나타났고 안구건조증은 스마트폰 사용 시간의 증가와 관련이 있는 것으로 나타났다.

본 연구에서는 지방 산화를 억제하고 품질이 우수한 부세 굴비의 가공법을 개발하기 위해 대두와 멸치의 복합 발효소재를 첨가한 염지제 처리 및 건조 시간에 따른 부세 굴비를 제조하여 품질 특성을 비교하였다. 발효소재 첨가에 따른 염지제와 부세 굴비의 DPPH 및 ABTS 라디칼 소거능은 발효소재의 함량에 따라 증가하였으나, 발효소재 1% 이상에서 부세 굴비의 라디칼 소거능은 유의적인 차이를 보이지 않았다. 발효소재의 함량이 증가할수록 부세 굴비의 아미노태질소 함량은 증가하고 VBN, TBARS, 산가는 감소하는 결과를 나타내나, 발효소재 1% 이상에서 품질의 유의적인 차이가 크지 않으므로 염지제의 발효소재 함량은 1%로 선정하였다. 염지제의 염도에 따른 부세 굴비의 품질을 분석한 결과 염도가 증가할수록 아미노태질소 함량은 증가하고 히스타민, VBN, TBARS, 산가는 감소하는 결과는 나타내며, 염지제의 염도는 품질 개선 효과가 가장 우수한 7% 조건을 선정하였다. 염지 처리 후 건조 시간에 따른 부세 굴비의 품질을 분석한 결 과 건조 시간이 증가할수록 수분은 감소하고 염도, pH, 아미노태질소, 히스타민, VBN, TBARS, 산가는 증가하였다. 그러나 건조 48시간 이하는 수분이 많아 저장성이 낮으며, 건조 96시간에서 히스타민과 산패도의 증가율이 높아지므로 부세 굴비의 건조 시간은 72시간이 적합한 것으 로 판단되었다.

본 연구는 베이비부머를 대상으로 미래시간조망과 주관적 안녕감의 관계에서 희망의 조절효과를 검증하는 것이다. 이를 위하여 D시의 베이비 부머(1955~1963년생)에게 면접식 설문조사를 실시하여 총 380부를 분석에 활용하였다. 자료분석은 SPSS 19.0과 PROCESS macro 3.3 통계프로그램을 사용하여 기술통계분석, 각 변인 간 상관관계분석, 희망의 조절효과를 알아보기 위한 회귀분석을 실시하였다. 주요 연구결과는 다음과 같다. 첫째, 미래시간조망은 주관적 안녕감에 유의미한 영향을 미치는 것으로 나타났다. 둘째, 미래시간조망과 주관적 안녕감의 관계에서 희망의 조절효과가 통계적으로 유의하게 나타났다. 이러한 결과는 베이비부머의 미래시간조망을 확장함으로써 주관적 안녕감을 높일 수 있고, 미래시간 조망 확장수준이 낮더라도 희망을 다양한 경로로 활용한다면 주관적 안녕감을 높일 수 있음을 나타내는 것이다. 이러한 통합적 경로확인을 바탕으로 베이비부머의 주관적 안녕감을 높일 수 있는 다양한 방법을 모색하였다.

본 연구의 목적은 청소년의 운동시간의 변화가 자아존중감의 변화로 이어지는 관계에서 그릿의 변화의 매개효과를 검증하는 것이다. 한국아동·청소년패널 2018의 중1 코호트 2개년도 자료 중 결측치를 포함한 케이스를 제외한 2,438명(남=1,327명, 여=1,111명)의 자료가 분석에 활용되었다. 각 변인의 변화량 간의 관계를 검증하기 위해 1차년도 측정값과 2차년도 측정값의 회귀분석에서 생성된 표준화잔차점수를 변화량 변수로 활용하였다. 상관관계 분석 결과, 운동시간의 변화량과 자아존중감의 변화량, 그릿의 변화량은 모두 서로 유의한 정적상관이 있는 것으로 나타났다. 위계적 회귀분석을 통한 매개효과 검증 결과, 운동 시간의 변화가 그릿의 변화를 통해 자아존중감의 변화에 직·간접적으로 영향을 미치는 부분매개효과가 유의한 것으로 확인되었다. 이러한 결과는 운동시간의 감소가 청소년의 그릿과 자아존중감의 감소에 영향을 미친다는 것을 의미한다.

The sampling bag is used as a storage container for odor gas samples. It is known that the substances recovery rate of odor bags decreases during storage time, and the degree of recovery varies depending on the characteristics of the gas sample and the material of the bag. This study investigated the recovery rate of VFA (ACA, PPA, BTA, VLA) in PEA bags during storage time. In addition, a model was developed to estimate the recovery rate of each substance as a function of time. Standard gas (ACA, PPA, BTA, VLA mixed) recovery rate was used for the model development. The concentration of the compound in the bag was measured by SIFT-MS at intervals of 1 to 2 hours. The recovery rate according to the storage time was calculated as the ratio to the initial concentration. The recovery rate of each substance according to the storage period (12h, 24h, 36h, 48h) was ACA (66.2%, 62.8%, 55.6%, 52.0%), PPA (77.6%, 72.1%, 63.0%, 58.1%, 86.6%), BTA (86.6%, 81.3%, 71.6%, 66.9%), VLA (94.8%, 89.0%, 76.6%, 71.7%). The recovery rate continued to decrease over the course of 48 hours of storage time. ACA, PPA, and BTA showed the greatest decrease within the initial 12 hours, which is form of exponential decrease. Therefore, we considered a 1~3 degree polynomial regression model and a 1~2 degree exponential decay model. Each developed model was evaluated by r², RMSE, MAPE, AIC, and then a model for each substance was selected. Selected models were tested with recovery rate data from swine farm odor samples. Only the ACA model exhibited a good performance (r² = 0.76).

대부분의 연구자들은 반응시간기반 숨긴정보검사(RT CIT)의 탐지 효율성을 평가하기 위하여 실험연구를 수행한다. 실험연구에서 거짓말하는 상황을 만들기 위하여 주로 두 가지 실험 패러다임이 사용된다. 한 가지는 모의 범죄 패러다임이며, 다른 한 가지는 개인적 항목 패러다임이다. 본 연구의 목적은 실험 패러다임에 관계없이 RT CIT의 탐지 효율성이 동일하게 추정되는지 검증하는 것이다. 연구 1에서는 선행 연구들에 대한 메타분석을 통하여 두 가지 실험 패러다임 간에 RT CIT의 효과크기가 다른지 검증하였다. 39개 연구에 대한 메타분석 결과, 모의 범죄 패러다임 의 효과크기(Hedges의 g=1.330)가 개인적 항목 패러다임의 효과크기(g=1.145) 보다 약간 컸지만, 통계적으로 유의한 차이는 아니었다. 연구 2에서는 모의 범죄 패러다임 조건과 개인적 항목 패러다임 조건을 포함하는 실험연구를 수행하여, 실험 패러다임에 따라 RT CIT의 탐지 효율성이 다른지 검증하였다. 변량분석 결과, 관련자극과 무관련자극 간의 반응시간 차이가 실험 패러다임에 따라 통계적으로 유의하게 다르지 않은 것으로 나타났다. 실험연구에서 모의 범죄 패러다임의 효과크기(Cohen의 d)는 1.638이었으며, 개인적 항목 패러다임의 효과크기는 1.535였다. RT CIT의 탐지 효율성이 실험 패러다임에 영향을 받지 않는 이유에 대하여 논의하였다.

KAERI has planned to carry out a series of dynamic tests using a shaking table and time-history analyses for a channel-type concrete shear wall to investigate its seismic performance because of the recently frequent occurrence of earthquakes in the south-eastern parts of Korea. The overall size of a test specimen is ×× 2500 mm×3500 mm×4500 mm, and it consists of three stories having slabs and walls with thicknesses of 140 mm and 150 mm, respectively. The system identification, FE model updating, and time-history analysis results for a test shear wall are presented herein. By applying the advanced system identification, so-called pLSCF, the improved modal parameters are extracted in the lower modes. Using three FE in-house packages, such as FEMtools, Ruaumoko, and VecTor4, the eigenanalyses are made for an initial FE model, resulting in consistency in eigenvalues. However, they exhibit relatively stiffer behavior, as much as 30 to 50% compared with those extracted from the test in the 1st and 2nd modes. The FE model updating is carried out to consider the 6-dofs spring stiffnesses at the wall base as major parameters by adopting a Bayesian type automatic updating algorithm to minimize the residuals in modal parameters. The updating results indicate that the highest sensitivity is apparent in the vertical translational springs at few locations ranging from 300 to 500% in variation. However, their changes seem to have no physical meaning because of the numerical values. Finally, using the updated FE model, the time-history responses are predicted by Ruaumoko at each floor where accelerometers are located. The accelerograms between test and analysis show an acceptable match in terms of maximum and minimum values. However, the magnitudes and patterns of floor response spectra seem somewhat different because of the slightly different input accelerograms and damping ratios involved.

High voltage impulse (HVI) has been gained attention as an alternative technique that could control the CaCO3 scale problems encountered in water main, pipe, cooling tower and heat exchanger vessels. The aim of this study was to investigate the effect of electric field (E) and contact time (t) of HVI on reduction of Ca2+ concentration at two different temperatures of 25℃ and 60℃. A kinetic model on the effect of E and t was investigated too. As the E and t increased, the Ca2+ concentration decreased more than that of the control (= no HVI). The Ca2+ concentration decreased up to 81% at 15 kV/cm at 60℃, which was nearly 2 times greater than the control. With these experimental data-set of reduction of Ca2+ concentration under different E and t, the kinetic model was developed. The relationship between E and t required to reduce the concentration of Ca2+ by 30% was modeled at each temperature. The empirical model equations were; E0.83· t = 60.3 at 25℃ and E0.08· t = 1.1 at 60℃. These equations state the products of En and t is always constant, which means that the required contact time can be reduced in accordance with the increment of E and vice versa.

PURPOSES : The purpose of this study was to evaluate the newly developed Guss mastic asphalt mixtures, called EQ-mastic asphalt mixtures, which contain melted additives for decreasing cooking time. METHODS : A series of experiments were performed to investigate the effectiveness of the melted additives in EQ-mastic asphalt mixtures. Both the existing Guss mastic asphalt mixture and the EQ-mastic asphalt mixture were produced with the same amounts of asphalt binders, aggregates, and fillers, but the existing Guss mastic asphalt mixture contained 3% Trinidad lake asphalt (TLA). The EQ-mastic asphalt mixture contained 3% of additives, including TLA and polyolefin. The physical material performances of both mastic asphalt mixtures were obtained by conducting the Luer fluidity test, penetration test, dynamic stability test, and low-temperature bending test. The results of the tests for the existing Guss mastic and EQ-mastic asphalt mixtures were compared. RESULTS : The fluidity, penetration, dynamic stability, and low-temperature bending strains of both the existing Guss mastic and EQmastic asphalt mixtures all satisfied the standard values provided in the production and construction guides of the Guss mastic asphalt pavement. CONCLUSIONS : When melted additives containing polyolefin are used in the production of Guss mastic asphalt mixtures, the cooking time decreases, so that the corresponding energy consumption and asphalt fume amount can be reduced. Therefore, an EQ-mastic asphalt mixture is proposed for use as an eco-friendly pavement material.

PURPOSES : This study defines travel time reliability as a concept that explains the change in travel time that passengers can hardly predict and calculates the value of travel time reliability based on travel objectives. METHODS : Because the reliability of passage time is difficult to estimate from actual passenger data, standard quantification measures have not been established despite various interests. In this study, the reliability of transit time was defined as the expense that passengers did not recognize in advance, such as an accidental delay caused by unforeseen circumstances. For analysis based on the individual behavior of users, the data were constructed using the optional experiment method (marginal rate of substitution method) of the stated preference survey, which has the advantage of controlling the correlation between attribute variables and maintaining the independence of the data of the study. RESULTS : Consequently, the reliability value of travel time in mandatory-purposed traffic was almost identical to the value of travel time, and the reliability value of travel time in return and shopping/leisure, which is not mandatory during non-business-purpose traffic, is lower than the value of travel time. Comparing and analyzing with existing studies on estimating the reliability value of transit time, both work/ non-work purposes are in line with the overall research results. CONCLUSIONS : Estimating the reliability value of transit time for each purpose of passage was the first attempt, and it is meaningful to suggest a direction for quantifying and applying the reliability value of transit time along with the passage time value of this study.

머신러닝 기법의 발달과 함께 기계에서 발생하는 다양한 종류(진동, 온도, 유량 등)의 데이터를 활용하여 기계의 상태를 진단하고 이상 탐지 및 비정상 분류 연구도 활발히 진행되고 있다. 특히 진동 데이터를 활용한 회전 기계의 상태 진단은 전통적인 기계 상태 모니터링 분야로 오랜 기간 동안 연구가 진행되었고, 연구 방법 또한 매우 다양하다. 본 연구에서는 가정용 에어컨에 사용되는 로터리 압축기에 가속도계를 직접 설치하여 진동 데이터를 수집하는 실험을 진행하였다. 데이터 부족 문제를 해결하기 위해 데이터 분할을 수행하였으며, 시간 영역에서의 진동 데이터로부터 통계적, 물리적 특징들을 추출한 후, Chi-square 검증을 통해 고장 분류 모델의 주요 특징을 추출하였다. SVM(Support Vector Machine) 모델은 압축기의 정상 혹은 이상 유무를 분류하기 위해 개발되었으며, 파라미터 최적화를 통해 분류 정확도를 개선하였다.