In this research article, scheduling a casting sequence in a job-shop type foundry involving a variety of casts made of an identical alloy but with different shapes and weights, has been investigated. The objective is to produce the assigned mixed order

The Fagus Factory at Alfeld on the Leine in Germany, which was built in 1911 and 1914, is a well-known and very important object in the history of modern architecture. Alan Colquhoun mentioned that it is "prophetic of the 'objective' (sachlich) Modern Movement of the 1920s". Vittrio M. Lampugnani evaluated it as "a Pioneer building of the architectural Realism". Most of historian of architecture explain that these achievements were accomplished mainly by the master architect Walter Gropius and sometimes by his co-worker Adolf Meyer. Through investigating the background in the planning stage and the process of design it is to try to find out what is truly happened during the project time. Furthermore, historical meanings of the building in the modern architecture is reinterpreted in the following aspects; who or which elements have influence on the Fagus Factory? and what kind of problems can be caused by the digested architectural history?

공장의 생산력을 향상하기 위하여, 현재 많은 공장에서는 동시에 TPM & TQM을 진행하고 있다. 이러한 활동을 통하여 제품의 품질을 향상하고, 원가를 절감하고, 납기를 단축하며, 생산의 유연성을 확보한다. 본 논문은 한국의 제조업에 대한 설문조사를 통하여 TPM 및 TQM과 생산 실행 요인 사이의 관계를 분석함으로써, 적극적으로 제조업에서 생산력을 향상하고 촉진할 수 있는 요인을 얻는 것이다.

We investigated dilution ratio values of the threshold limit (DRVTL) and 12 odorous compounds from a number of emission points (stack and process) and boundary areas of 10 chemical industries in the Ban-Woll and Shi-Wha Industrial Complex in Gyeonggi Province. The results of our study suggest that differences in odor emission concentrations are caused by such as factors as : suitability and operational conditions of prevention equipment, suitability hood of process and exhaust ventilation system, differences of raw materials of chemical industry. It was found that trimethylamine and hydrogen sulfide recorded the highest contribution from two types of emission points (stack and process), respectively. Show some actual concentration values here, hydrogen sulfide recorded its maximum values from leather industry, while trimethylamine for hexamine production industry. On the other hand, the results of dimethyl sulfide, dimethyl disulfide and methyl mercaptan were not useful, as their concentrations were not significantly high enough to judge from such respect. In the view-point of dilution ratio values of the threshold limit, the average emission ratio of stack and process from 10 chemical industries was 57, 43%, respectively. Therefore, it is important that the odor emission value from process and stack have to minimize and regulate for management of industrial odor.

In this report, we provide the focus on suggesting a method of estimating and measurement of CBM(Customer Behavior Model). Through the use of internet, a new trend of business for e-CRM on B2C Web Site known as EC has emerged. The purpose of this study is to identify the relationship between the customers of a shopping mall and CBM characteristics. It can be used to gain a better understanding of customers. From this we can determine trends, and so refine business toward customer's needs and target new products to particular customer groups. Result shows that there is a significant relationship between the customers pattern of shopping mall and CBM, CVM(Customer Visit Model).

This research analyzes clean room major fire prevention standard of clean Room(FM, IRI, and NFPA Code), the structure of Performance-Based Fire Safety Design(PBD) applied the korean fire industry situation. Performance-Based Fire Safety can operate effectively the performance of fire protection equipment & building design, so the fitness of fire safety system can be embodied by operating this. moreover, cost to be consume fire safety of real building can reduce and Performance-Based Fire Safety is considered to important technique in fire protection field. A fire in a clean room may cause a serious loss by spreading smoke particles. We will be investigated by using a computational fluid dynamics, for loss prevention by smoke spreading from one fire area to another for clean room and compared the Performance-Based Fire Safety Design with the prescriptive code design. The methodology of fire safety performance-based fire safety design and guarantee of many kinds design skill of fire system and developing design procedure will be very serious one in order to improve efficiency of domestic system. Therefore, This research will be contributing to secure safety of clean room and to set up the performance-based fire safety design in Korea by regulation for the performance-based fire safety design effectively.

This research was performed with the subject of 111 offices in a chemical plant of Korea. Airborne concentration level of carbon dioxide, carbon monoxide, formaldehyde and total suspended particulates in the office rooms were measured along with temperature and relative humidity. Simultaneously, general characteristics and subjective health symptoms of 500 office workers were investigated through a questionnaire consisting of the five point weighting method : 0 = not at all, 1 = a little bit, 2 = moderately, 3 = quite a bit and 4 = extremely. Results showed that the mean values for temperature and relative humidity in investigated office rooms were 22.2℃ and 34.3%, respectively. The concentrations of formaldehyde, PM10, carbon dioxide and carbon monoxide were 0.17 ppb, 28.8 ㎍/㎥, 0.95 ppm and 424 ppm, respectively. 56.4% of all the workers investigated replied with a sense of fatigue or weariness (mean=2.23), drowsiness or languidness (mean=2.22), sneezing (mean=2.11) and ophthalmia oreye fatigue (mean=2.07). Female workers, non-smokers, non-drinkers, workers who do shift more than nine hours a day, and workers in poor health experienced more subjective symptoms than other workers (p<0.05). Subjective symptoms of office workers were significantly associated with the following items of office characteristics: the purchase date of office equipment, the change of office furniture, the use of paint, smoking in the office, ventilation condition, the use of an individual air-conditioner, the use of a fax machine, the degree of office repair, the proportion of workers per office, the degree of satisfaction in office environment, and the operation hours of the air-conditioner. Also, subjective symptoms were positively correlated with indoor environmental factors such as relative humidity, carbon dioxide level, level of PM10, and formaldehyde (p<0.05). In conclusion, office characteristics and air quality in a chemical plant affected subjective health symptoms of office workers. Thus, in order to improve the health of workers, to enhance work efficiency, and to establish a better office environment, air quality control in office rooms by optimal ventilation, adequately occupied number of workers in one office, and maintenance of office equipment should be fulfilled thoroughly. keywords：Air quality, Subjective health symptom, Formaldehyde, PM10, Carbon monoxide, Carbon dioxide

This study was conducted to develop a system and an control algorithm for control the environment of a plant factory. The greenhouse control system for environmental control was largely composed of a computer and a PLC. The screen of control program was composed of a greenhouse figure which was included machinery and equipments for greenhouse, the graph of environmental factors of inside greenhouse and the image of greenhouse. In order to reduce temperature change, the operation time of ventilation window was changed by 3 stage according to difference between a target and present temperature. When is heating, a temperature variation was shown to be 16.7±0.8℃. When is cooling, a temperature variation was shown to be 23.1±0.6℃. When is humidifing, a humidity variation was shown to be 39.3±1.6℃ %RH. An environmental control system and a control algorithm were proved that it was shown a good performance in a control accuracy. So a computer control system should be adapted to a control system of a greenhouse and a plant factory.

When air with high humidity is stagnant in a huge hot-rolling building, condensation occasionally occurs on the surface of hot-rolling steel coils, degrading quality of the products. To resolve this problem, we tried to utilize the natural ventilation effectively by modifying the location and size of opening vents based on quantitative visualization of ventilation flow inside the factory building. The 1/850 scale-down building model was embedded inside an atmospheric boundary layer simulated in a wind tunnel. The effects of wind direction and location of opening vents on the ventilation flow inside the factory building were investigated experimentally. Instantaneous velocity fields inside the building model were measured using a 2-frame PIV system. Among four dominant wind directions for the building tested, the condensation phenomena occurred monthly for the case of south wind. The addition of a vent on the southern wall of the factory building improved the natural ventilation effectively.

In this paper, we propose a systematic procedure to determine standard time and cycle time in a TFT-LCD factory. The proposed procedure mainly consists of data preprocessing, hypothesis testing and Group technology. Data preprocessing extracts relevant da

본 연구는 식물공장용 체인컨베이어식 조간조절장치를 개발하기 위해 수행하였다. 개발 시스템을 재배작물에 실제로 적용하기 위해 평가 시험하였다. 실험결과, 식물공장에서 수경재배되는 채소의 주간을 조절하는 기술을 제공하였다 작물조간조절단계는 매주 수확하는 것으로 하여 4단으로 설정하였고, 단계별 이송속도는 각각 6.4, 9.6, 12.3, 15.8cm·s-1이었고, 조간조절량은 각각 101.6, 152.4, 203.2, 254.0mm로 나타났다. 1단계에서 4단계로 작물이 이송되는 동안 작물과 재배 홈통의 무게가 17N에서 935N으로 증가함에 따라 구동축토오크도 11.7~33.3N·m범위에서 증가하여 이론토크 값보다 5.9~9.8N·m 더 소요되었으며, 이때의 진행 저하율은 1.6~2.1%이었다. 재배홈통의 이동소요 시간의 설계 값이 2.26초이고 실측값이 2.24초로 잘 일치한 것으로 나타났다. 조간조절장치는 조간조절량이 설계된 값의 5%이내 범주에서 잘 조절되고, 시스템으로도 안정적으로 나타나 식물공장용 조간조절장치로 체인컨베이어식 조간조절장치가 활용될 수 있을 것으로 판단되었다.

장미 식물공장식 양액재배는 고품질의 절화를 대량으로 계획 생산할 수 있는 시스템으로 장미 수출증가에 따라 기존의 재배 방식에서 식물공장 형태로의 전환이 필수적이다. 또한 식물공장에서의 경제적이고, 효율적인 생산을 위한 지하부 환경의 최적 관리 기술 개발이 절실한 실정이다. 따라서 장미 식물공장에 적합한 single-stemmed rose 수경재배시 배양액의 온도과 같은 지하부 환경요인이 장미의 생육과 품질에 미치는 영향을 알아보고자 실험하였다. 배양액의 온도에 따른 'Red Velvet'의 광합성률, 증산량, 생육 및 수량이 15~20℃에서 높게 나타나 적정 배양액 온도임을 알 수 있었다. 반면에 'Vital'은 10~15℃에서 생육이 가장 왕성하고 30℃의 고온에서는 거의 생육이 이루어지지 않아 'Red Velvet'과는 달리 고온의 배양액에 대한 적응력이 낮은 것으로 나타났다.

<Objective> This study were carried out to study to assess the relationship between job characteristics, general characteristics,　health behaviors, and psychosocial distress and suggested the preventive oriental medicine approaches in occupational health area. <Methods> We measured job characteristics(job demand, job control, jop insecurity) by The Karasek's Job Content Questionnaire, health behaviors(smoking, drinking, exercise, coffee), general characteristics at work by a self-administered questionnaire. Psycho social distress was measured by PWI(Psychosocial Well-being Index), a 18-item selfadministered instrument. 370 data for research were collected through the process of oriental health examination with questionnaire in workplace. Statistical analysis was done by t test, oneway ANOVA, and hierarchical multiple regression analysis with SPSSWIN (version 10.0) <Results> Among the 152 respondents, the prevalence of high job strain was 27%(41 persons). The Odds ratio of high job strain was 3.11(95 2.12∼4.11), and those of passive group and active group were 2.01(95 0.83∼2.76) and 1.80(95 0.83∼2.76), respectively. Our results supported the association between psychosocial distress and job strain. <Conclusion> The odds ratio of high strain isolated group(high strain group+low social support) was 3.59(95 2.05 5.13), but the odds ratio of high strain collective group was 1.32(95 0.23 2.41). Social support at work was modifing factor of the association between psycho social distress and job strain. Therefore we reviewed the evidence that economic depression was associated with psycho social distress in this study, and that the strength of the social support was important in maintain health.

This paper considers the workforce assignment problem to minimize both the deviations of workloads assigned to workers and to maximize the total preference between each worker and each machine. Because of the high expense of technology education and the d

The chemical factory deals with dangerous element and more advance, human-error analyzes and becomes effective research for the country and region. This paper analysis the form of work-miss on human-error according to a safety accident for domestic chemical factory from 1999-2002. It include the present contents and raise issues human knowledge, behavior, judgment, sensibility as an important counter plan that makes the safety solution of work miss. For the point of view of human knowledge, it takes color standard for works to be effective in work place. For behavior, the test has been for risk Point of work place and infra worker movement, also the workers performed professional work as classify according to work. For judgement, the valuation sheet is reflected to minimize the human-error and the 3rd supervisor does a cross-check audit beforehand. For sensibility, it is applicable for human relations, information, communication by program to the consciousness and an attitude of worker-supervisor.

The chemical factory deals with dangerous element and more advance, human-error analyzes and becomes effective research for the country and region, this paper analyes the form of work-miss on human-error according to a safety accident for domestic chemical factory from 1999-2002. It include the present contents and raise issues human knowledge, behavior, judgment, sensibility as an important counterplan that makes the safety solution of work miss. For the point of view of human knowledge, it takes color standard for works to be effective in work place. for behavior, the test has been for risk point of work place and infra worker movement, also the workers performed professional work as classify according to work. for judgement, the valuation sheet is reflected to minimize the human -error and the 3rd supervisor does a cross-check audit beforehand. For sensibility, it is applicable for human relations, information, communication by program to the consciousness and an attitude of worker-supervisor.

This research is devoted to develop and evaluate the alternative plans of the Plants Within Plants (PWP) case for improving productivity. Three alternative plans were made for the productivity improvement of the existing system of the case. The first plan was designed on the base of reducing work stations and reducing balance delay. The second plan has used the group working concept. The third plan has also applied the group working with the allowance time for compensating workers movements. The computer simulation method has been used for comparing and evaluating the existing system with three alternative plans. The simulation results have shown that the second one is superior to the other three lines in terms of low Work-In-Process(WIP) level and the high production output. The third plan has also shown the higher production output and lower WIP level than the existing one. In conclusion, applying group working concept to the PWP production environment could be the solution for increasing productivity.

This study concerns with an ergonomic approach for improving the workplace of an air-conditioner factory. If work tasks and equipments do not include ergonomic principles in their design, workers may have exposure to undue physical stress, strain, and overexertion, including awkward postures, forceful exertions, repetitive motion, and heavy lifting. The purpose of this study is to improve the safety, comfort, and efficiency of the workplace. Adapting tasks, work stations, tools, and equipments to fit the worker can help reduce physical stress on a worker's body and enhance the effectiveness and efficiency of workplace.