Currently, the budget for vocational competency development training has been expanded, but the number of participants has decreased. As the budget for the Vocational Competency Development Project increases, the participation of a large number of people becomes necessary. This study aims to derive factors that affect satisfaction by selecting factors related to respondent characteristics, training institutions, training types, and job performance for satisfaction with vocational competency development training, and to study ways to improve satisfaction. Data were collected through focus group interviews (FGI), and logistic regression analysis was conducted through feasibility review and reliability analysis. As a result, in the case of the model, it was confirmed that the degree of agreement between the case actually measured and the case predicted by the model was low in the Hosmer and Lemeshow test, but the overall classification accuracy was classified as 96.0% in the classification accuracy table. As for the influence of the factors, the result was derived that the application of knowledge technology, training institution facility equipment, Business Collaboration, long-term work plan, and satisfaction with work performed have an influence in the order.

In the case of incumbent training, unlike training for the unemployed, it is difficult to show the results of training. In this study, factors affecting the performance of vocational competency development training were selected and the main factors were derived. Data were collected through Focus Group Interview(FGI), and regression analysis was performed through factor analysis and reliability analysis. As a result, empathy, training participation type, reliability, working experience, and training operation type were derived as factors affecting job satisfaction. did. Confidence and training participation patterns were derived as factors affecting training satisfaction, and the results showed that the larger the variable, the more positive it was. Therefore, as factors affecting the vocational competency development training performance, there are empathy, training participation type, reliability, work experience, training operation type, certainty, and training participation type. It was confirmed that the results had an effect.

Purpose: This study aims to investigate the effect of a simulation-based patient safety performance improvement education program on caregivers’ knowledge, attitude, and performance toward safety. Methods: This study adopted a quasi-experimental design that applied before-and-after designs for the test and control groups. It was configured focusing on “infectious disease,” “fires,” “falls,” and “drug abuse.” Results: There was a significant difference in knowledge and patient safety performance between the experimental group and the control group. However, there was no significant difference in attitudes toward safety. Conclusion: The results of this study showed that the simulation-based patient safety performance improvement education program is effective in improving patient safety performance. Therefore, it is necessary to continuously apply and evaluate the simulation-based patient safety performance training program to enable caregivers to develop professional prevention and management capabilities within elderly care facilities

목적 : 본 연구는 최저임금적용제외인가 작업능력평가를 위한 역량지표를 개발하여 생산성과 함께 장애인 근로자의 직무수행능력을 평가하는 데 활용하고자 한다. 연구방법 : 선행연구를 통해 장애인근로자의 작업능력평가 관련 지표를 도출한 후, 3명의 전문가의 검증을 거쳐 델파이 조사지 초안을 제작하였다. 그 후 20명의 전문가에게 델파이 연구를 통해 장애인근로자의 최저임금적용제외인가 작업능력평가를 위한 역량지표를 도출하고자 하였다. 결과 : 총 2회의 델파이 연구 결과, 인지기능, 사회기능, 작업기능, 안전보건활동 등 4개의 역량군과 숫자 처리능력, 정보활용능력 등 20개의 역량지표가 도출되었다. 결론 : 도출된 역량군 및 역량지표는 장애인근로자의 직무수행능력을 평가하는데 활용하여 최저임금적용제 외인가 작업능력평가의 타당성을 높일 수 있을 것이다. 향후 연구에서는 각 역량군과 역량지표에 대한 척도를 개발하고, 현장에 적용하여 타당도를 검증해야 할 것이다.

As interest in vocational competency development projects increases, support is increasing. In this study, in order to study ways to improve participation in vocational competency development training, related factors are selected and the main factors influencing them are derived. The main factors were influencing factors were identified and ways to improve participation rate of vocational competency development were studied. Variables were selected through prior research, and data were collected and analyzed through in-depth group interviews. Based on factor analysis and reliability analysis, as a result of confirming the factors that influence the plan for improving participation in vocational competency development training by applying the backward stage selection (condition) method of logistic regression analysis, the case of respect for minorities in the 7-point Likert scale The closer to 7 was, the higher the probability of being classified as having never participated, and the other factors except minority respect, Likert scale closer to 7 indicates higher probability of bening classified as having never participated, except for the minority respect factor. Therefore, it was confirmed that lowering the scale of the factor of respect for minority, which is job satisfaction, and increasing the factors of individual characteristics such as annual salary and organizational commitment, training system for job satisfaction, and quality assurance have effects on improving participation rates in vocational competency development training.

본 논문에서는 한국어 쓰기 교육을 위한 교육용 게임으로서 text-to-scene 모델을 제안한다. 사용자 입력 문장에 대해 즉각적인 피드백을 제공하기 위해서, 제안하는 text-to-scene 모델은 사용자 입력 문장의 의미구조를 분석하여 장면을 자동으로 생성한다. 사용자가 문장을 교정하면서 자연스럽게 한국어 쓰기 능력이 향상될 수 있도록, 제안하는 text-to-scene 모델은 정답 장면과 사용자 입력 문장에 대한 장면을 함께 제공하므로, 사용자는 입력 문장의 어느 부분이 잘못되었는지 쉽게 파악하고 문장을 수정할 수 있다. 기존의 text-to-scene 연구에서 정교하게 장면을 생성하기 위해서는 필요한 자원 구축이 어렵고 처리 과정이 매우 복잡하다는 점을 고려하여, 제안하는 text-to-scene 모델은 외국인이 쉽게 이해할 수 있는 수준으로 장면을 단순하게 표현한다. 실험결과 격조사나 문장 요소 생략 등을 고려하여 15개의 단어를 임의로 조합하여 5개 어절 이내의 문장 1,048,576개 문장을 만들어 실험한 결과 제안하는 모델은 한 문장당 평균 14.94ms가 소요하면서 안정적으로 장면을 생성하였다. 외국인을 대상으로 한 작문 시험 결과, 종이를 이용한 작문 결과에서는 10개 문항 중 오답 문장이 평균 4.7개 나왔는데, 제안하는 text-to-scene 모델을 이용한 작문 결과에서는 한 문장 당 평균 1.56회의 미리보기를 하고 문장을 수정하여 0.87개가 나왔다.

한문과와 같이 학습자에 따라 또는 한문 교과 이수 정도에 따라 학업 성취 수준이 크게 차이가 나는 특수한 경우에는 학생 개개인의 특성 및 차이, 숙달 및 미숙 등에 따라 개별적으로 평가 결과 를 분석하거나 보고(reporting)한다면, 이러한 자료들을 통해서 학생들은 더 나은 학습을 수행 (performance)할 수 있고 교사들은 더욱 효율적인 교수 ‒ 학습을 진행할 수 있다. 이러한 관점 하에 서 최근 교육 평가 분야에서 새롭게 주목하고 있는 인지진단모형(cognitive diagnostic model)을 소 개하고 한문과 평가에 적용해 볼 필요가 있을 것으로 판단하였다. 따라서 이번 연구에서는 최근에 새롭게 주목받고 있는 인지진단모형을 한문과 평가 연구자들에게 간단히 소개하고, 한문과 수능 문 항과 문항의 특정 속성과의 관계를 규명하여 Q행렬을 구성해봄으로써 인지진단모형의 한문과 적용 에 대한 적절성과 적용 가능성을 탐색해보고자 한다.

Process quality control, which prevents problems and risks that may occur in products and processes, has been recognized as an important issue, and SPC techniques have been used for this purpose. Process Capability Index (PCI) is useful Statistical Process Control (SPC) tool that is measure of process diagnostic and assessment tools widely use in industrial field. It has advantage of easy to calculate and easy to use in the field. Cp and Cpk are traditional PCIs. These traditional Cp and Cpk were used only as a measure of process capability, taking into account the quality variance or the bias of the process mean. These are not given information about the characteristic value does not match the target value of the process and this has the disadvantage that it is difficult to assess the economic losses that may arise in the enterprise. Studies of this process capability index by many scholars actively for supplement of its disadvantage. These studies to evaluate the capability of situation of various field has presented a new process capability index. Cpm is considers both the process variation and the process deviation from target value. And Cpm + is considers economic loss for the process deviation from target value. In this paper we developed an improved Expected Loss Capability Index using Reflected Normal Loss Function of Spring. This has the advantage that it is easy to realistically reflect the loss when the specification is asymmetric around the target value. And check the correlation between existing traditional process capability index (Cpk) and new one. Finally, we propose the criteria for classification about developed process capability index.

Since the conventional methods of physical therapy may decrease the motivation of a patient for rehabilitation due to repetitive, monotonous movement, a new physical therapy system inducing a motivation from the patient is needed. The present study is intended to develop a physical therapy serious game for enhancement of dynamic balance control. The balance control therapy game was developed by the following steps: (1) survey of existing balance control therapy systems, (2) analysis of balance control literature, (3) ideation and architecture planning of the balance control therapy game, and (4) implementation of the balance control therapy game. The proposed physical therapy serious game can provide better usability, satisfaction, clinical effectiveness for balance control than the conventional methods.

If examining utilization by completion of National Competency Standards development, efforts are made so as to organize curriculum matched to education or training and perform subjects based on competence unit educationally in specialized high schools, colleges and university. However, National Competency Standards is insignificantly utilized in enterprises and on the spot due to characteristics of occupation type and diversity of process. This thesis intended to measures of safety efficiency improvement of final enterprise through the human resources assessment system of National Competency Standards based enterprise. Therefore, various methodologies were introduced and results of analysis by Balanced ScoreCard method were suggested for policy measures improving final safety efficiency. The results of this analysis are expected to make contribution to improving the effectiveness of the government's industrial safety and health policies through the establishment of systematic safety and health systems according to the risk level of individual business.

The present study is aimed at examining in multilateral ways the structural relationship among technological orientation, market orientation and product development performance of manufacturing companies, which are deemed to be key factors for them to increase absorptive capacities. From the study, it was revealed that: First, in terms of the relationship between market orientation and absorptive capacities, it was made clear by the analysis that the market orientation sought after by manufacturing companies has influence upon their absorptive capacities. Second, with regard to the relationship between technological orientation and absorptive capacities of manufacturing companies, the analysis found that the technological orientation pursued by them affects their absorptive capacities. Third, as for the relationship between absorptive capacities and product development performance, the analysis made it clear that the absorptive capacities of manufacturing companies exerts influence upon their product development performance. Fourth, in respect to the relationship between market orientation and product development performance, it was concluded from the analysis that market orientation produces effect upon product development performances like technological innovation and acquisition of new technologies needed for product development. Finally, regarding the relationship between technological orientation and product development performance of manufacturing companies, it became obvious from the analysis that the technological orientation affects the product development performance.

신제품 또는 신기술의 개발은 기업의 생존과 직결한 문제로써 급변하는 경영환 경과 심화하는 경쟁 속에서 성과 창출과 향상에 대한 관심이 증대하고 있다. 그러나 중소기 업은 국가 경제에서 차지하는 위상에 비해 규모와 보유자원 등의 한계를 가지므로 국가에서 는 다양한 정책적 지원을 제공한다. 조직수명주기에 관한 연구에 따르면 성장단계별로 기업 의 한계와 애로사항이 다르므로 차별적 지원이 이루어져야 할 필요가 있음을 알 수 있다. ‘2011년 중소기업기술통계’에 응답한 2,575개 기업 자료를 대상으로 기술개발공정의 기술 능력 수준과 편차가 R&D 매출성과에 어떤 영향을 끼치는지 검증하였다. 분석 결과, 기술능 력 수준은 R&D 매출성과에 정(+)의 영향을 끼쳤다. 또한, 기술능력의 편차와 R&D 매출성과 간에 관계를 정부지원이 조절하는 것을 알 수 있었다. 하지만, 정부지원이 기술수준이 R&D 매출성과에 미치는 영향을 성장단계별로 다르게 조절할 것이라는 가설에 대한 실증 분석 결 과 성장단계별로 조절효과가 유의적으로 각각 다르게 나타났다. 연구의 이론적인 시사점은 성장단계를 고려하지 않은 단순한 역학관계를 떠나 좀 더 실제 로 복잡한 중소기업 환경을 직시할 수 있는 현실적인 인과 모형을 제시하였고, 따라서 다양 성을 다각적인 방법으로 측정하여 연구변수로 활용해야하는 당위성을 마련하였다. 또한 실 무적 시사점은 성장단계별 정부지원에 대한 정책을 차별적으로 수립할 수 있고, 각자 다른 성장단계에 있는 중소기업으로 하여금 맞춤식의 정책을 순응하도록 하여 정부지원금의 효과 적으로 사용할 수 있는 가이드라인을 제시하였다는 것이다.

It developed 836 units on the classification of KECO. But. Actual companies do not take advantage of improvements in job competency and production processes. This study is improved manufacturing industry production process use to developed the national competency standards(NCS). After we finds process problems, develop production process improvement method.

Process Capability Index (PCI) is useful Statistical Process Control (SPC) tool that is measure of process diagnostic and assessment tools widely use in industrial field. It has advantage of easy to calculate and easy to use in the field. Cp and Cpk are traditional PCIs. These are only considers of process variation. These are not given information about the characteristic value does not match the target value of the process. Studies of this process capability index by many scholars actively for supplement of its disadvantage. These studies to evaluate the capability of situation of various field has presented a new process capability index. Cpm is considers both the process variation and the process deviation from target value. And Cpm + is considers economic loss for the process deviation from target value. In this paper development of new process capability index that is Taguchi's quadratic loss function by applying the expected loss. And check the correlation between existing traditional process capability index (Cpk) and new one. Finally, we propose the criteria for classification about developed process capability index.

Process Capability Index(PCI) is useful Statistical Process Control(SPC) tool that is measure of process diagnostic and assessment tools widely use in industrial field. It has advantage of easy to calculate and easy to use in the field. Cp and Cpk are traditional PCIs. These are only considers of process variation. These are not given information about the characteristic value does not match the target value of the process. Studies of this process capability index by many scholars actively for supplement of its disadvantage. These studies to evaluate the capability of situation of various field has presented a new process capability index. Cpm is considers both the process variation and the process deviation from target value. And Cpm+ is considers economic loss for the process deviation from target value. In this paper development of new process capability index that is Taguchi's quadratic loss function by applying the expected loss. And check the correlation between existing traditional process capability index(Cpk) and new one. Finally, we propose the criteria for classification about developed process capability index.

The objective of this study was to develop of semen transport system for cryopreservation and fertility in bull sperm. The ejaculated semen were diluted with Triladyl containing 20% egg-yolk for transportation. Diluted semen was transported by three methods that there were wrapping tissue (Tissue), sinking under 30℃ water (Water) and sinking between warm water and air (Air) methods. Semen was transported within 2 hours in 0.3℃. For this study, the freezing of diluted semen were added with Triladyl containing 20% egg-yolk. And frozen-thawed sperm were estimated with SYBR14/PI double stain for viability, FITC-PNA/PI double stain for acrosome reaction analysis and Rhodamine123 double stain for mitochondrial intact assessment. In results, live sperm (SYBR+/PI-) in Air treatment group (43.3±4.7%) was significantly (p<0.05) higher than other treatment groups (Tissue: 16.3±2.7% and Water: 27.5± 3.1%), dying sperm (SYBR+/PI+) in Air treatment group (55.6±4.7%) was significantly lower than other treatment groups (Tissue: 77.6±3.2% and Water: 67.6±3.3%) (p<0.05). Acrosome reaction in Air treatment group (0.2±0.1%) within live sperm (PI negative region) was significantly (p<0.05) lower than other treatment groups (Tissue: 0.7±0.2% and Water: 0.5±0.1%), the acrosome reaction in Air treatment group (28.6±2.8%) within all sperm also was significantly lower than other treatment groups (Tissue: 44.2±1.8% and Water: 36.2±2.0%) (p<0.05). And mitochondrial intact in Air treatment group within live (97.1±0.4%) and all (61.9±3.3%) sperm were significantly higher than other treatment groups (Tissue: 85.2±3.3%, Water: 87.8±2.9% within live sperm and Tissue: 49.28±3.7%, Water: 42.0±3.1% within all sperm) (p<0.05). Therefore, we suggest that transportation by sinking method between warm water and air was beneficial to improvement of fertility in frozen-thawed in bull semen.

목적 : 본 연구의 목적은 장애인 직업재활 훈련 실무자를 대상으로 훈련생들의 직업 수행을 돕기 위한 인지재활 프로그램의 필요성에 대한 인식을 알아보고 인지훈련 영역 중 가장 필요한 인지요소를 조사하기 위함이었다. 또한 향후 장애인 직업능력 강화를 위한 인지재활 프로그램 개발에 기초자료를 제공하고자 하였다. 연구방법 : 국내 장애인 직업훈련 및 지원 사업을 담당하는 전문가들 98명을 대상으로 인지재활 프로그램의 필요성 인식과 직업재활에서 집중적으로 훈련이 필요한 인지 요소를 조사하고 인지재활이 필요한 장애유형을 알아보고자 설문 조사지 방식으로 진행하였다. 결과 : 설문응답자의 83.7%가 인지재활을 들어보았고 50.0% 정도가 인지재활을 시도해 보았으며 필요성에 대한 인식도는 5점 척도 중 평균 3.61점으로 나타났다. 또한 다양한 인지 요소 중 훈련생들에게 더 집중적으로 제공해야 할 인지 훈련요소는‘주의집중’‘, 상황인식과상황판단’‘, 문제해결능력’‘, 지시에따라수행하기’순으로조사되었다. 결론 : 국내 직업재활 훈련 현장에서 인지재활에 대한 실제적인 필요성을 알 수 있었다. 본 연구는 직업재활을 지지하는 인지재활 프로그램 개발의 필요성을 위한 기초자료 조사와 이를 담당하는 작업치료사의 필요성을 인식시키는데 의의가 있다.