This study was conducted to estimate the effects of the forage process on rumen fermentation characteristics and greenhouse gas emissions of rye. Rye was grown at the Taeyoung Livestock farm and harvested at the heading stage. The harvested rye (5 kg) was sub-sampled for fresh forage, hay, and silage in triplicates. The sub-sampled rye was freeze-dried or air-dried for fresh forage or rye hay, respectively. For rye silage, the sub-sampled rye forage was ensiled into a 10 L mini bucket silo and stored for 90 days. For 72 h rumen incubation, each forage (0.3 g) was placed into the incubation bottle with the rumen mixture (30 mL) in quadruplicates. After the incubation, total gas was measured and sub-sampled for CO2 and CH4 analyses, and the bottle content was centrifuged for in vitro digestibilities of dry matter (IVDMD) and neutral detergent fiber (IVNDFD), and rumen fermentation characteristics. Silage had higher crude protein, crude ash, and acid detergent fiber concentrations than fresh forage and hay but lower non-fiber carbohydrates and relative feed value (p<0.05). And, silage had higher lactic acid bacteria than the other forages but lower pH (p<0.05). After 72 h incubation in the rumen, fresh forage had higher IVDMD and butyrate content than the other forages (p<0.05). However, silage had higher rumen pH and propionate content than the other forages but lower A:P ratio (p<0.05). Regarding greenhouse gases, silage had lowest total gas (mL/g DMD and NDFD) and CH4 (mL/g DMD and NDFD) emissions, while fresh forage had lowest CO2 (mL/g DMD) emission (p<0.05). Therefore, this study concluded that the ensiling process of rye can effectively mitigate greenhouse gas emissions of Hanwoo.

Black soldier fly (BSF, Hermetia illucens) has been noted as an excellent feed ingredient. However, there is limited information on rearing and processing technology. Thus, this study was conducted to evaluate the substrates for rearing BSF and the optimal processing method for BSF performance. Study separated as 2 experiment, BSF rearing and drying method(Exp 1.) and EP-processing method(exp 2.). During the study, 30 clutches were reared, with 10 per substrate. Three substrates, namely food waste (FW), tofu by-product (TF), and vegetable waste with two drying methods, namely hot air dry (AD) and microwave dry (MW) at expanding (EP) ratios of 5:5 and 7:3, were examined by evaluating their rearing performance, nutrient contents, in vitro digestibility and lipid oxidation stability during storage (0, 14 and 28 days). In experiment 1, the rearing substrates and drying methods were evaluated. Compared with that of conventional methods (FW, AD), the TF substrates and MW method showed higher dry matter contents (3.43%) and in vitro digestibility (1.62%) but lower ether extract contents(3.53%; p<0.05). However, the malondialdehyde (MDA) concentration under MW treatments decreased during storage (5.77%, 4.69% and 3.24%; p<0.05). In experiment 2, compared with that of the 7:3 EP-BSF ratio, the 5:5 EP-BSF ratio showed higher in vitro digestibility (2.70%) and lower MDA concentration during storage (19.19%, 7.96% and 6.42%; p<0.05). In conclusion, the optimal conditions for BSF rearing and ensuring product quality were TF substrates, MW methods and a 5:5 corn:BSF ratio. Therefore, the optimal conditions for producing EP-BSF can present an excellent feed ingredient alternative for swine feed.

ICT 산업의 글로벌 시장을 선점할 수 있는 다음 세대의 개발이 필요한 상황이 일어남에 따라 웨어러블 디바이스 의 생체 신호 모니터링에 대한 관심이 크게 증가하고 있다. 이에 따라 본 연구에서는 히스테리시스가 적은 E-Band를 사용하여 단일벽 탄소나노튜브(SWCNT) 분산 용액에 함침 공정을 통해서 저항형 직물 인장 센서(Resistive textile strain sensor)를 개발하였다. 전기전도성이 부여된 e-band에 저항 신호를 측정하기 위해 만능재료시험기(UTM)과 Microcontroller unit인 아두이노와 LCR 미터를 이용해서 인장의 변화에 따른 저항 변화를 측정하였다. 원단으로 이 루어진 텍스타일 스트레인 센서의 특성상 발생하는 다양한 노이즈들을 효과적으로 처리하기 위하여 신호처리 과정 (Signal processing)의 노이즈 필터링의 이동평균 필터, 사비츠키-골레이 필터, 중앙값 필터들을 사용하여 센서의 필 터 성능을 평가하였다. 그 결과 이동평균 필터의 필터링 결과의 신뢰도가 최소 89.82%, 최대 97.87%으로 이동평균 필터링이 텍스타일 스트레인 센서의 노이즈 필터링 방식으로 적합하였다.

본 연구에서는 버섯의 건조 및 로스팅 처리의 가공방법에 따른 생리활성 성분과 영양성분의 변화에 대하여 알아보기 위해서 실험을 수행하였다. 항산화 등의 생리활성 성분의 변화를 분석한 결과, DPPH 라디컬 소거능은 잎새 버섯의 열풍건조 시료에서 가장 높았으며, 팽이와 꽃송이 버섯은 가공방법별 유의적인 차이는 없었다. 아질산염 소거능은 꽃송이버섯의 로스팅 시료에서 증가하는 것으로 나타났으며, 팽이와 잎새버섯은 유의적 차이가 없거나 생 시료에 비하여 낮았다. 총 폴리페놀 함량은 팽이와 꽃송이버섯 로스팅 시료가 생버섯(fresh) 시료에 비하여 증가 하는 것으로 나타났다. 아미노산 분석결과, 잎새버섯은 로스팅 처리로 인하여 아미노산 성분들 중 단맛을 담당하는 세린(Ser), 알라닌(Ala)성분들이 증가함과 동시에 쓴맛을 나타내는 류신(Leu), 이소류신(Ile) 성분들은 감소하는 것으로 나타났으며, 팽이와 꽃송이버섯은 필수 아미노산 성분을 포함하여 대부분의 아미노산 성분 함량이 로스팅 처리로 인하여 생시료에 비하여 증가하고 있는 것으로 나타나 로스팅 처리가 버섯내의 영양성분 향상에 효과가 있는 것으로 확인되었다.

하수오(Polygonum multiflorum Thunb)는 다년생 덩굴성 식물로, 지하부인 뿌리(tuber)는 한의학에서 약재로 다양한 질병의 치료에 사용되고 있다. 하수오를 한약재로 사용하기 위하여 약용물질의 증진 또는 식물의 독성을 줄이기 위해 1차 가공 및 포제를 한다. 본 연구에서는 하수오 포제에 있어 다양한 보료처리를 통해 주요물질의 유효성분 함량을 확인 해 보고, 하수오 포제에 적합한 보료를 검증하는 실험을 진행하였다. 또한, 실험에 두 가지 타입의 하수오를 활용하여 기존 유통품 하수오와 조직배양 연구를 통해 개발된 KIOM 특허 기반 하수오를 비교하는 실험을 진행하였다. 하수오의 주요 지표물질인 emodin의 함량이 참깨추출물을 보료로 사용한 처리구를 제외한 나머지 보료 처리구(흑두즙, 쌀뜨물, 감두즙, 로즈마리추출물)에서 KIOM품이 유통품보다 높게 측정되는 것을 확인하였다. 특히 KIOM품은 기존에 알려진 하수오 보료인 흑두즙보다 감두즙을 보료로 사용해 포제 하였을 때 0.29 ug/mg 더 높은 emodin의 함량이 확인 되었다. 본 연구결과를 통해 하수오의 약용자원으로 사용함에 있어 앞으로 KIOM하수오의 생산과 포제에 관련된 연구가 더 이루어 져야 할 것이며, 연구 결과는 하수오의 포제에 있어 표준화와 현대화를 위한 기초 지식 및 결과로 사용 될 것이라고 사료된다.

This study was conducted with two ruminally cannulated Holstein steers to examine the effect of micronized and steam flaked corn on ruminal fermentation characteristics. The in situ dry matter degradability after 48 h incubation was the highest (P<0.05) at micronized corn (2.5 mm thickness) compared with steam flaked corn treatments. The steam flacked corn (3.3 mm thickness) was degraded lower (P<0.05) than the 2.9 and 3.1 mm thickness of steam flacked corn. Effective dry matter degradability and the rate of constant were the highest (P<0.05) at micronized corn (2.5 mm thickness) compared with steam flaked corns as well. The in vitro dry matter degradability after 48 h incubation was tended to higher (P=0.088) at micronized corn (2.5 mm thickness) than steam flaked corns, whereas there is no significantly difference between steam flaked corn treatments. Total volatile fatty acid concentration was higher at steam flaked corn (2.9 mm thickness) than micronized corn (2.5 mm thickness) and steam flaked corn (3.1 and 3.3 mm thickness). The acetate : propionate ratio was the highest (P=0.008) at steam flaked corn (2.9 mm thickness) and the lowest (P=0.008) at micronized corn (2.5 mm thickness). Total gas and methane production after 48h ruminal incubation was the highest (P=0.001) at micronized corn (2.5 mm thickness) compared with steam flaked corns. According to these results, the thickness of steam flaked corn as resulted corn processing is believed to do not affect methane production. However, further study is needed to better understand the present results to verify the correlation between corn processing method and their thickness on methane production using the same thickness corns by difference processing methods.

This study was performed to determine the effects of different processing methods (AD: drying at 50°C for 15 h; ADR: roasting after drying; SAD: drying after steaming; SADR: roasting after steaming and drying) on the quality characteristics, total phenolic content, anthocyanin content, DPPH radical scavenging activity, and reducing powder of red radish (Bordeaux and watermelon radish) tea. The pH of red radish tea was the highest with SAD. In terms of the total sugar content, Bordeaux radish tea showed the highest level with AD, ADR, and SAD, and watermelon radish tea showed the highest level with SADR. The a value of Bordeaux radish tea was higher with AD and ADR. The b value of Bordeaux radish tea was increased with steaming and roasting treatment. In terms of measuring the colors of watermelon radish tea, the L value was decreased while the b value was increased with roasting treatment. The total phenolic content, DPPH radical scavenging activity, and reducing powder with ADR and SADR were higher than those in samples prepared by different processing methods. AD and SAD resulted in higher anthocyanin contents than ADR and SADR. In terms of sensory evaluation, the appearance and color were rated higher with AD and SAD, whereas the flavor and taste were ranked higher with ADR and SADR than in the other samples. The results suggest that red radish (Bordeaux and watermelon radish) tea prepared by ADR and SADR processing methods can be utilized as health functional tea material with antioxidant activity.

Ptaquiloside는 고사리에 들어 있는 발암성 물질이다. 본 연구는 다양한 조리법에 따라 고사리에 함유된 ptaquiloside 을 측정해 보고자 하였다. 조리법은 가열, 물에 침지, 물 교환 횟수 등이었다. 알칼리 가수분해와 용매분획은 ptaquiloside를 화학적으로 안정한 물질인 pterosin B로 전환시켜 주었다. Pterosin B 함량은 이동상용매로 3 mM ammonium과 메탄올 용매를 사용하여 UPLC-MS/MS로 분 석하였다. 조리과정이 없는 생고사리의 H2O추출물에 함유 된 pterosin B함량은 81 mg/kg으로 검출되어 독성물질 ptaquiloside는 46.4 mg/kg이었다. 5분의 가열 시간 후 고사리의 pterosin B 함량은 약 60%정도 제거시켜주며, 이 중 2/3는 ptaquiloside에서 전환된 pterosin B가 아닌 고사리 고유의 ptersoin B 함량이었다. 12시간 침지를 추가한 고사리는 처리하지 않은 고사리에 비해 약 88%, 또한 매 시간 물교환 작업을 추가시 99.5%까지 제거됨을 알 수 있 었다. 따라서 독성물질 ptaquiloside의 제거는 가열시간과 더불어 침지와 물 교환 횟수도 동시에 이루어져야 함을 알 수 있었다.

The physiochemical properties of dried yam (Dioscorea batatas) by freeze dryer, cold-air dryer or hot-air dryer were examined for chromaticity, water absorption index (WAI), water soluble index (WSI), rehydration, viscosity properties and pasting properties. Freeze dried yam was maintained higher degree of lightness and higher WAI and WSI than those of cold-air or hot air dried one. In the case of rehydration, freeze dried yam was restored within one hour. The viscosity properties of freeze dried yam were the highest viscosity in all shear rates. Freeze dried yam was milled by roll mill (RM), pin mill (PM) or jet mill (JM) to evaluate for particle size, starch damage, pasting property and microstructure. Particle size was JM < PM < RM as 13.85~112.50 μm. In the result of starch damage, it was the highest value as 8.83 in JM, was the lowest value as 7.47 in RM. In pasting property, JM had relatively low viscosity at all shear rates. In the Microstructure by measuring scanning electron microscope, JM particle surfaces were rough with high starch damage, and particle size was confirmed fine particles in JM.

Macroporous ceramics with tailored pore size and shape could be used for well-established and emerging applications, such as molten metal filtration, biomaterial, catalysis, thermal insulation, hot gas filtration and diesel particulate filters. In these applications, unique properties of porous materials were required which could be achieved through the incorporation of macro-pores into ceramics. In this article, we reviewed the main processing techniques which can be used for the fabrication of macroporous ceramics with tailored microstructure. Partial sintering, replica templates, sacrificial fugutives, and direct foaming techniques was described here and compared in terms of microstructures and mechanical properties that could be achieved. The main focus was given to the direct foaming technique which was simple and versatile approach that allowed the fabrication of macro-porous ceramics with tailored features and properties.

People have been concerned about mercury emissions for decades because of the extreme toxicity, persistence, and bioaccumulation of methyl Hg transformed from emitted Hg. This paper presents an overview of research related to mercury control technology and identifies areas requiring additional research and development. It critically reviews measured mercury emissions progress in the development of promising control technologies. This review provides useful information to scientists and engineers in this field.

The objective of this research is to introduce key performance indicators (KPIs) measuring overall equipment effectiveness (OEE) or overall operation effectiveness (OOE) effectively. OEE is one of the most effective KPI to measure the productivity and quality levels of an equipment-centric manufacturing company and widely implemented with a spreaded TPM (total productive maintenance). OEE is the most representative time-related KPI. For ease of measurement, OEE is calculated on the basis of the quantity of the processing materials and theoretical cycle time instead of using time-related sub-indicators. Hence, setting up theoretical cycle times is the most important aspect of the OEE measurement. Increasing customer's demand and developed manufacturing technology, more products can be made in a machine. So there will be multiple theoretical cycle times in a machine, but they have not been extensively considered for setting up theoretical cycle times in previous research. Futhermore the limitation to measure a performance of an operation which is consists of multiple machines is often mentioned in previous research. This paper shows how to measure OOE based on multiple theoretical cycle time.

Muck (Korean traditional starch jelly) is very unique and the one of the oldest starch processing traditional food. The typical ingredients for making muck such as acorns, mungbean and buckwheat have been eaten since the new stone age or even before that era. This study was for investigation on the history of muck and its processing methods in the ancient and the modern culinary literatures from the 1400’s to 1900’s. The summary of the reviews was as follows. In the ages from the 1400’s to 1700’s, using starch powder, Se-myon and Chang-myon were made and their shape were like noodles instead of cubical shape. It was after the 1700’s that muck making methods were revealed in the literature, like 「Gyeong-do-jabji」 (1730) and「Go-sa-sib-e-jib」 (1737). The naming of muck might be from the time after 1800’s, in「Myoung-mul-kiryak 」 (around 1870) the basis of the names of Choeng-po (white mungbean jelly) and Whang-po (yellow mungbean jelly) could be found. One of the most well-known muck dish, Tang-pyeong-chae, was recorded many old literatures, so it was found that Tang-pyeong-chae was very popular and governmental policy of Tang-pyeong-chak influenced the food of the common people. In 「Shi-eui-jeon-seo」 (late 1800’s) there were records of several types of muck and starch powder making methods in detail which were handed down to the modern ages.

This study was conducted to establish traditional manufacturing process of Hongju, a traditional spirit by traditional Kokja and Koji method based on different materials. In the fermentation process, the changes of temperature, pH, total acid, alcohol, total sugar and microflora in mash were analyzed. During the whole fermentation period, the temperature in mash made by Kokja method was reached to 30℃, and that of Koji method was reached 33℃. There was no significant difference in pH by different treatments and the initial pH in Koji method was pH 6.0 and the final pH was 4.0. The content of total acid was higher in mash processed by Kokja method than that of Koji method. Alcohol content was higher in mash processed by Koji method. The content of total sugar in all samples were reduced gradually according to progress of fermentation. Yeast populations in all samples were increased up to 6 days of fermentation and then decreased gradually. Lactic acid bacteria were increased until 3 days of fermentation and then decreased until the fermentation completed.