Nitrogen (N) loading from domestic, agricultural and industrial sources can lead to excessive growth of macrophytes or phytoplankton in aquatic environment. Many studies have used nitrogen stable isotope ratios to identify anthropogenic nitrogen in aquatic systems as a useful method for studying nitrogen cycle. In this study to evaluate the precision and accuracy of Kjeldahl processes, two reference materials (IAEA-NO-3, N-1) were analyzed repeatedly. Measured the δ¹⁵N-NO₃and δ¹⁵N-NH₄values of IAEA-NO-3 and IAEA-N-1 were 4.7±0.2‰ and 0.4±0.3‰, respectively, which are within recommended values of analytical uncertainties. Also, we investigated spatial patterns of δ¹⁵N-NO₃and δ¹⁵N-NH₄in effluent plumes from a waste water treatment plant in Han River, Korea. δ¹⁵N-NO₃and δ¹⁵N-NH₄values are enriched at downstream areas of water treatment plant suggesting that dissolved nitrogen in effluent plumes should be one of the main N sources in those areas. The current study clarifies the reliability of Kjeldahl analytical method and the usefulness of stable isotopic techniques to trace the contamination source of dissolved nitrogen such as nitrate and ammonia.

수술이 불가능한 담관암에서 담관 내 고주파 열치료는 악성 담관 폐쇄를 호전시키는 실용적인 치료로 보고되고 있으나, 내시경적 역행성 담췌관조영술을 이용한 고주파 열치료는 투시조영을 통해 열을 적용하는 방법으로, 병변을 직접 시각화하지 못하는 단점이 있다. 반면에, 직접 경구 담관 내시경하 담관 내 고주파 열치료는 담관 내 병변을 시각화함으 로써 카테터의 삽입 등에 용이하며 시술로 인한 합병증을 감 소시킬 수 있을 것으로 기대되고 있다. 본 증례에서는 총담 관십이지장문합술을 시행 받은 담관암 환자에서 직접 경구 담관 내시경하 담관 내 고주파 열치료를 적용하여서 스텐트 시술 없이 담관 개존을 보존한 첫 번째 사례로서 직접 경구 담관 내시경하 담관 내 고주파 열치료의 효용성을 문헌 고찰과 함께 보고하는 바이다.

방선균증(actinomycosis)은 실 모양의 혐기성 세균인 방선 균에 의한 감염 질환으로, 유황과립이 특징적인 화농성 병변 을 초래한다. 방선균증은 종괴처럼 보이는 병변으로 발현할 수 있는데, 이런 이유로 방선균증은 종종 악성 종양으로 오인됐고, 많은 환자들이 정확한 진단이 내려지기 전에 수술적 절제를 받았다. 저자들은 만성췌장염 환자에게 발생한, 악성 종양과 감별이 어려웠던 췌장에 국한된 방선균증 증례를 보고하는 바이 다. 환자는 감염의 증상 및 징후를 전혀 보이지 않았고, 다른 장기의 동반 감염도 없었다. 모든 영상 소견은 염증성 종괴 보다는 췌장암을 더 시사했다. 그는 내시경초음파 유도 가는 바늘 생검을 통해서 수술 없이 방선균증을 진단 받았다. 한 달 동안의 항생제 치료 이후에 췌장의 종괴는 완전히 사라졌다.

개방형 도시정보모델은 3차원 가시성으로 인한 상황 이해도를 증진시키고, 의미정보 및 객체간 관계정보로의 접근으로 인한 효율적인 정보 재사용을 가능하게 하며, 다양한 외부 데이터와의 연계를 통해 구체적이고 신뢰도 높은 의사결정을 지원한다. 본 연구에서는 실제 데이터를 기반으로 지형 및 건물에 대한 개방형 도시정보모델 생성하였다. 또한 침수해 발생과 관련한 수리해석 데이터와 도시정보모델을 연계한 건물의 침수 시뮬레이션 프로세스를 개발하고 이를 적용하였으며, 인명 및 재산피해 예상값을 도출하였다. 마지막으로 정보모델이 포함하고 있는 모델 데이터와 침수 수리해석 결과 및 피해결과를 활용한 구체적인 질의를 통해 도시정보모델의 활용성을 검토하였다.

본 연구는 지진위험도 산출에서 불확실성을 줄이는 한 방법으로서 지진위험도 계산에 입력되는 파라미터들(a, b값, Mmax, 감쇠식 및 지진지체구조)이 지진위험도 값에 어느 정도로 영향을 미치는지 민감도를 분석하고자 하였다. 이를 위해 지진 전문가 10명이 제시한 입력자료를 사용하였다. 그 결과 a값, Mmax값이 커질수록 PGA값이 증가하였으며, b값은 작아질수록 PGA값이 커졌다. 가장 큰 영향을 미치는 파라메타는 감쇄식, b값 및 a값이며, Mmax와 지진지체구조구 모델의 영향은 상당히 적었다. 따라서 영향이 큰 파라메타에 대해서는 한반도의 지진학적 특성에 적합한 값의 산출이 요구된다.

This study describes the effects of canola oil biodiesel (BD) blended fuel on the combustion performance and emission characteristics in a 4-cylinder common-rail direct injection diesel engine. In this study, with the increasing of engine loads, the biodiesel blend fuels(100 vol.% ULSD and 0 vol.% biodiesel blend, BD0; 80 vol.% ULSD and 20 vol.% biodiesel blend, BD20; 0 vol.% ULSD and 100 vol.% biodiesel blend, BD100; ULSD: ultra low sulfur diesel) were used at an engine speed of 1,500rpm. The experimental results showed that with the increasing of biodiesel blend rate, the combustion pressure decreased slightly at engine load of 20~60Nm. However, the rate of heat release (ROHR) increased clearly and ignition delay time was shortened. With the increasing of biodiesel blend rate, the carbon monoxide (CO) and particulate matter (PM) emissions were more decreased at all of the engine loads.

This study was performed to determine the optimal month of harvest between May and July for wild peach (Prunus davidiana) by comparison of functional materials. The general composition, amino acid and vitamin (A, C, and E) content, and antioxidant activity were determined. With respect to the general composition of wild peach according to the month of harvest, wild peach harvested in May (HMP) and July (HJP) contained mostly carbohydrate, the contents of which amounted to 77.37 g/100 g and 77.92 g/100 g, respectively. The total amino acid content of HMP and HJP were 675.29 mg% and 573.25 mg%, respectively. Regarding the vitamin contents, vitamin A (retinol), E (α-tocopherol) and C in HMP were higher than those in HJP. The total polyphenol content of HMP (218.37 mg TAE/g) was higher than that of HJP (71.45 mg TAE/g). The total flavonoid content of HMP (64.95 mg RE/g) was also higher than that of HJP (32.67 mg RE/g). Moreover, the DPPH and ABTS radical scavenging activities (IC50) were higher in HMP (137.18 μg/mL and 157.15 μg/mL) than those in HJP (160.10 μg/mL and 186.01 μg/mL), meaning that the former produces better antioxidant effects. It can be concluded that wild peach harvested in May contained higher functional materials such as vitamins and amino acids and had a higher antioxidant effect, than wild peach harvested in july.

막대나 히스토그램과 같은 그래픽 요소는 통계자료의 탐색적 분석을 위한 정보 시각화 도구로 자주 활용되어왔다. 이에 비해단계구분도나 유선도와 같은 전통적 주제도는 지리참조된 통계자료의 공간 분포 및 패턴 분석을 위한 유용한 시각화 기법으로 인식되었다. 그러나 통계학 분야에서 최근 제안된 연결형 마이크로맵은 공간통계자료의 탐색적 분석을 위한 효과적인 시각화 도구로서 많은 관심을 받고 있다. 이에 본 연구는 서울특별시 자치구를 대상으로 생산된 공간통계자료를 시각화할 수 있는 연결형 마이크로맵을 R 프로그래밍 언어를 이용하여 구현하여 제시하였다. 그리고 본 연구는 기존 주제도와 차별적인 연결형 마이크로맵의 특징을 고찰하였다. 연결형 마이크로맵은 전통적 주제도의 한계를 해결하고 정보 손실을 최소화할 수 있는 효과적인 시각화 기법으로서 그 활용도가 높아질 것으로 기대된다.

This study was performed to investigate the effect of fuel combustion enhancing apparatus(FCEA) for ionization of intaking air into cylinder combustion chamber on the combustion performance and emissions characteristics in a 4-cylinder common-rail direct injection diesel engine. The experiments were applied to the engine at an engine speed of 1,500rpm under 20Nm, 40Nm, 60Nm and 80Nm conditions. The test results were compared to each other with or without the FCEA. In the case of the FCEA, the combustion pressure, peak combustion pressure and rate of heat release were increased slightly and the brake specific fuel consumption(BSFC) was decreased slightly when compared to that without the FCEA under all loads at an engine speed of 1,500rpm. However, in the case of the FCEA, the nitrogen oxide(NOx) were increased slightly, the carbon monoxide(CO) and particulate matter(PM) were decreased slightly when compared to that without the FCEA under all loads at an engine speed of 1,500rpm.

Corporate association—which refers to consumers’ beliefs, knowledge, perceptions, and evaluations of a corporation—can affect consumers’ purchasing intentions. Corporate association consists of corporate ability association and corporate social responsibility association. Corporate ability association refers to a company’s product quality, corporate innovation, productivity, consumer orientation, and after service. Corporate social responsibility association, which refers to the social perspective a company has of its responsibility to society, can affect corporate image and consumers’ purchasing intentions. Eco-labeling for protecting and sustaining the environment is one of the important green marketing strategies in the fashion business that can influence corporate association and consumers’ purchasing intentions. The purpose of this study was to investigate the effect of consumers’ eco-label recognition on their corporate association and intentions to purchase eco-friendly fashion products. Questionnaires were distributed to consumers. The 263 usable questionnaires that were returned were analyzed by descriptive statistics, Cronbach’s alpha, factor analysis, regression analysis, and t-test. The results were as follows: There was a significant effect of eco-label recognition on corporate association (ability association and social responsibility association). Eco-label recognition and corporate association were found to significantly affect consumers’ purchasing intentions. Regarding the eco-friendly fashion product buying experience, there was no significant difference on corporate association and buying intention, but there was significant difference on eco-label recognition.

The several experiments of Diesel vehicles using EFT were completed. The experiments were performed on chassis dynamometer and road driving test using test mode such as FTP-75 and LA-4. The experiments were employed to measure the effect eco-friendly EFT additives on exhaust emissions and fuel consumption efficiency. In this experiment, the following results are obtained by analyzing the data relativity between exhaust emissions and EFT additives. The value of exhaust emissions such as NOX, SOX, CO2 and PM were improved as Diesel mixed EFT additives at th ratio of 200:1. The improvement of resulting data value was best PM, NOX, SOX, CO₂and fuel consumption rate in the order named.

This study investigated the quality characteristics and antioxidant activities of wet noodles as well as their cooking properties following the addition of peanut sprout extract (PSE) and powder (PSP), which are known to contain a significant level of resveratrol. Wet noodles were prepared with 0, 2.5, 5, 7.5 and 10% PSE and PSP. Quality characteristics such as increasing volume of noodle, water ratio, turbidity of cooking water and color, texture, and sensory evaluation were then assessed. Additionally, the total resveratrol content in the cooked noodles was analyzed by HPLC and DPPH free radical scavenging capacity. As the amount of PSE and PSP increased, the L value of wet and cooked noodles significantly decreased, whereas the a and b values increased (p<0.001). The L value of cooked noodles was significantly lower compared to wet noodles (p<0.001) whereas the a and b values were higher. For the cutting intensity properties of the cooked noodles, hardness was reduced with increasing amounts of PSE (p<0.001), and was significantly increased in proportion to the amount of PSP (p<0.05). Meanwhile, springiness was not significantly different in all groups. Total resveratrol content and free radical scavenging activity significantly increased in proportion to the amounts of PSE and PSP (p<0.001), especially in noodles containing 5%, 7.5% and 10% PSE and PSP. Finally, sensory evaluation of PSE noodle revealed that color, flavour, taste were significantly decreased (p<0.05). But there was no difference in overall acceptance among cooked noodles with 2.5% to 5% PSE comparison to the control. Sensory characteristics in the PSP noodle showed similar results. In conclusion, these findings suggest that peanut sprout extract and powder could be potentially used as functional food ingredients. In addition, up to 5% PSE and PSP can be substituted for wheat flour.

은행 가공산업에서 부산물로 제거되는 은행 외종피의 활용성을 증대시키고자 다양한 생리활성에 미치는 열처리의 영향을 살펴보았다. 은행 외종피를 분리하여 130℃에서 2시간 열처리한 후 물, 70% 에탄올 및 80% 메탄올 추출물을 제조하여 생리활성변화를 살펴본 결과, ABTS와 DPPH 자유라디칼 소거활성은 80% 메탄올 추출물을 제외하고, 열처리 후 증가하는 경향을 보였으며, 물 추출물에서 각각 14.95 mg AAE/g과 7.36 mg TE/g으로 높게 나타났다. α-Glucosidase 저해 활성은 물 추출물을 제외하고 열처리 시 감소하는 경향을 보였으며, 열처리 전 80% 메탄올 추출물에서 98.66%로 가장 높게 나타났다. Angiotensin converting enzyme I 저해 활성은 추출물 간의 유의적인 차이가 없었으며(P>0.05), 열처리 후 모두 감소하였다. 산화질소 생성억제 활성은 열처리 시 증가하였으며, 물 추출물(200 μg/mL)이 12.33 μM로 LPS 처리구에 비해 산화질소 생성량을 72.39% 감소시켰다. 지방구 축적억제활성은 세포독성을 보이지 않는 농도에서 열처리 시 감소하였다. 유방암 세포주에 대한 항암 활성은 열처리 후 증가하는 경향을 보였다. 이상의 결과로부터 은행 외종피 추출물의 다양한 생리활성을 확인하였으며, 특히 열처리 후 항산화 활성과 유방암 세포주에 대한 증식억제 활성이 크게 증가하였으며, 추후 생리활성물질의 규명 연구가 필요하다고 판단된다.

본 연구에서는 저층 조적채움벽 철근콘크리트 골조 구조물의 내진보강 전과 후에 대하여 강제 진동 실험과 상시 진동 계측을 수행하였으며 시스템 식별과정을 통하여 구조물의 동특성을 구하고 해당 구조물과 유사한 동특성을 보이는 해석 모델을 만들었다. 시스템 식별 결과 댐퍼가 설치된 x방향의 감쇠비가 증가되었으며, 해석 모델과 비교한 결과 추가 설치된 부재들(전단벽과 댐퍼)의 유효 강성은 부재의 총단면 강성의 50%만이 발현되어 해당 부재들이 기존의 구조물이나 부재와 완전히 일체화되지는 않음을 알 수 있었다. 또한, 추가 설치된 기초의 y방향 구속조건을 핀으로 하여야 동특성을 일치시킬 수 있었는데, 이는 새로운 기초가 설치되며 해당 지질의 특성이 변화되었기 때문으로 보인다.

본 논문은 넓은 보의 전단강도를 대상으로 한 실험적 평가에 대해 기술하였다. 본 논문의 실험을 통해 넓은 보에 횡방향 단면에서 GFRP 판의 보강개수와 종방향 전단보강 간격, 그리고 유효깊이가 전단강도에 끼치는 영향에 관하여 연구하였다. 총 7개의 시험체에 유공형 GFRP 판 형태로 전단보강재를 보강하여 전단성능 실험을 실시하였다. 본 논문에 기재된 전단보강재는 유공형 판 형태로 제작되어 타설 시 콘크리트의 유동성을 증가시켜 보강재와 콘크리트의 부착력을 향상시켰다. 7개 시험체의 주 변수로는 전단보강재의 횡방향 단면에 대한 판의 보강개수와 종방향 전단보강 간격, 그리고 유효깊이로 정하였다. 시험체의 균열 및 파괴 양상, 변형률과 전단강도비를 분석하였다. GFRP판으로 전단보강된 넓은 보의 전단강도는 ACI 318-11 기준으로 산정되었다. 실험의 결과를 통해 유공형 GFRP 판이 전단보강재로서 넓은 보에 효과적으로 적용됨을 확인하였다.

ZnO micro/nanocrystals at large scale were synthesized through the thermal evaporation of Al-Zn mixtures under air atmosphere. The effect of synthetic temperature and time on the morphology of the micro/nanocrystals was examined. It was found that the temperature and time affected the morphology of the ZnO crystals. At temperatures below 900 oC, no crystals were synthesized. At a temperature of 1000 oC, ZnO crystals with a rod shape were synthesized. With an increase in temperature from 1000 oC to 1100 oC, the morphology of the crystals changed from rod shape to wire and granular shapes. As the time increased from 2 h to 3 h at 1000 oC, tetrapod-shaped ZnO crystals started to form. XRD patterns showed that the ZnO crystals had a hexagonal wurtzite structure. EDX analysis revealed that the ZnO crystals had high purity. It is believed that the ZnO nanowires were grown via a vapor-solid mechanism because no catalyst particles were observed at the tips of the micro/nanocrystals in the SEM images.

본 논문에서는 유공형 강판의 횡방향 보강간격에 따른 넓은 보의 전단성능을 실험적으로 평가하기 위하여 횡방향 전단보강 간격과 넓은 보의 유효깊이를 변수로 고려하였다. 시험체는 총 8개로 유공형 강판으로 전단보강한 시험체가 5개, 무보강 시험체가 3개이다. 균열 및 파괴유형, 변형률과 하중-변위 곡선을 분석하였다. 유공형 전단보강재의 전단강도 기여분을 분석하고, 횡방향 전단보강의 최대간격을 제안하였다. 횡방향 전단보강 개수가 2개인 시험체에 비해 3개인 시험체에서 전단강도가 크게 나타났으며 유효깊이가 증가할수록 전단강도가 크게 나타났다.

In this study, material tests were performed on the masonry specimens constructed with bricks and mortar used in Korea. The specimens included two types of thickness(0.5B and 1.0B) and physical conditions (good and poor). It was shown that 1.0B specimens have 3.2~1.8 times larger shear strength than 0.5B specimens and shear strength of specimens in poor condition was 66%~38% of those in good condition. Average shear stress of masonry-infills was calculated from previous experimental studies, and relationships with failure mode, material strength of masonry, aspect ratio, and frame-to-infill strength ratio were investigated. In addition, the effects of masonry strength on the seismic performance of a masonry-infilled frame was studied using a simple example building. It can be seen that the obtained average shear stress were considerably higher than the default masonry shear strength recommended by the ASCE 41, and low values the strength of masonry does not guarantee conservative evaluation results due to the early shear failure of frame members.

The study aims at quantifying the effect of nano technology in the fields of economics and social aspects by using the methodology of system dynamics. A case study which using selenium oxide nanoparticles as additive agent in order to enhance fuel efficiency was selected as an example of nano technology in economic and societal benefits. Additionally, models for exhaust gas from combustion of fuel (diesel) and related issues are developed to evaluate real-time assessment of the effect of nano technology. It was found that the selenium oxide nanoparticles increase fuel efficiency, and it also affects on the amount of exhaust gas and the respiratory disease related issues. The results of this study which give quantitative value for the effect of nano technology can be used as objective references in development of national policy.

It is well known that smoking generates harmful air pollutants. With smoking in buildings as well as in the streets prohibited, the need for smoking rooms has emerged. In this study, particle and CO contamination in a 63.6 m3 smoking room was experimentally investigated using Korean tobacco. Tobacco smoking was artificially simulated using a smoking machine. The number and size distribution of particles ranging from 10-420 nm and 0.25-32 μm were measured using a Nanoscan (TSI model 3910) and a portable aerosol spectrometer (Grimm model 1.109), respectively. CO concentration was also monitored using an IAQ monitor (Graywolf IAQ-Xtra 610). Four tobaccos were simultaneously smoked in each experiment, and the experiment was repeated four times. Maximum CO concentrations of 7-10 ppm were observed and high concentrations of particles (176,000-1,115,000 particles/cm3 for 10-420 nm, 3,700-5,200 particles/cm3 for 0.25-32 μm) were also monitored. The dominant size of tobacco particles was about 100 nm in diameter.