Recently, Introduced the study of fire resistance design. This paper has been written about the cross-sectional temperature distribution in the square CFT columns are painted in Intumescent paint. Study on the thermal properties Intumescent paint is not yet clear. Thus, the finite element analysis was performed by reference to the properties of other materials. FEM results Were compared with the experimental results. It offer a range of thermal properties considering the thermal mechanism of the fire-resistant paint as a result.

Through Estimation of stress distribution, both value and location of the maximum stress can be found. and the maximum stress is very important indicator for structural safety evaluation. In this connection, a lot of studies to estimate stress distributions are conducted. But studies on the optimal number and location of measurement points are few. So, In this study, the effects of the number and location of measurement points on the estimation stress distribution for the steel beam structure using motion capture system and cubic smoothing spline interpolation are researched.

In order to ensure the high carbon conversion in a short residence time in a coal slurry entrained gasifier, the objectiveof this study lies in to investigate the effect of important variables to influence on the complex reacting flow and therebyto clarify the physical feature occurring inside the gasifier using a comprehensive gasifier computer program. To this end,the gasification process of a 1.0ton/day gasifier is numerically modeled using the code of Fluent and systematicallyinvestigated with the change of major design and operation parameters. Special emphasis is given on the effect of theparticle size distribution on the gasification process, since it is associated with various length and time scales via multi-phase and with complex reacting flows. Three different particle sizes are tested for a given coal mass flow rate, the firstis 70µm mean diameter with Rosin-Rammler distribution based on the actual measurement. But in the other two casestwo uniform mean particle diameters are employed, that is, very fine 1µm and 70µm with mean diameter itself. Thecalculation results of these three cases show quite different flow pattern, temperature and reacting flows probably causedby the different particle trajectory as well as reaction rate. However, the results obtained can be explained in a consistentmanner with particle size. Especially, it is noted that the presence of coal particle, the diameter of which is larger thanthat of mean diameter of Rosin-Rammler distribution, shows a significantly retarded gasification reaction in a gasifier,even if its mass fraction is less than 50%.

본 연구에서는 합천댐, 회천 유역에 대하여 비슬산 이중편파 레이더를 이용하여 유역평균강우량을 각각 추정하여 지상 우량계의 강우량과 비교한 후 분포형 유출모형인 Vflo 모형을 사용하여 유출을 모의하였다. 유역평균 강우량 분석 결과 이중편파 레이더 변수를 사용한 결과 첨두우량 및 전체 강우량 값이 지상우량계 값과 근접하게 산정되었고, Vflo 분포형 모형을 사용한 유출모의 분석 결과 또한 이중편파 레이더 변수를 사용한 유출모의가 실제 유출량에 근접하였다. 이는 이중편파 레이더를 사용한 강우추정 및 유출모의가 기존의 수평반사도만을 사용한 단일편파 레이더보다 정확성을 높일 수 있는 방법이라고 판단된다.

최근 기후변화에 의한 기상이변이 발생하고 국지적 집중호우로 인한 홍수피해가 심각하게 증가하고 있다. 이러한 피해를 경감하기 위한 방법으로 정확한 홍수유출량 예측을 통한 홍수예경보 구축이 필요시 된다. 정확한 홍수유출량 예측을 위해 수문기상학적 요소와 특성인자들의 정확한 상호 연관성 규명과 공간적 변동성 해석은 강우-유출 모형에서 발생하는 불확실성을 감소시키는데 중요한 요소로 작용하게 된다. 본 연구에서는 정확한 홍수유출량을 산정하기 위한 강우-유출모형을 이용한 입력자료의 해상도에 따른 불확실성을 감소시키기 위해 강우격자 해상도와 지형인자 격자 해상도에 따라 강우-유출모형이 어떻게 반응하는지 분석하였다. 분포형 강우-유출 모형인 GRM 모형을 이용하여 내성천 및 감천 유역을 대상으로 이벤트를 산정하여 홍수유출 모의 및 검증을 실시하였다. GRM 모형 구성을 위한 입력자료(강우, DEM, 토지이용도, 토양도)의 해상도 격자크기는 500m 격자크기를 기본으로 각각 1 km, 2 km, 5 km, 10 km, 12 km 격자크기의 지형자료를 사용하여 유출모의를 실시하고 유출량 변화를 모의하였다. 입력자료별 모의결과로 DEM의 분석결과는 모든 시험유역에서 공통적으로 DEM의 격자크기가 증가할수록 첨두유량과 총유출량이 일정하게 감소하는 경향을 나타내고 있다. 나머지 입력자료로 토지이용 및 토양도에 격자크기에 따른 모의결과는 DEM과는 상반되게 일정한 경향성을 나타나지 않는 것으로 분석되었다. 특히 일정한 경향성이 나타나는 DEM의 분석결과는 DEM의 격자크기가 증가할수록 수평거리가 증가하여 경사도는 감소하는 특징으로 인해 나타나는 결과인 것으로 판단된다.

In order to understand the relation between the distribution of sea surface temperature and heavy snowfall over western coast of the Korean peninsula, several numerical assessments were carried out. Numerical model used in this study is WRF, and sea surface temperature data were FNL(National Center for Environment Prediction-Final operational global analysis), RTG(Real Time Global analysis), and OSTIA(Operational Sea Surface Temperature and Sea Ice Analysis). There were produced on the basis of remote sensing data, such as a variety of satellite and in situ observation. The analysis focused on the heavy snowfall over Honam districts for 2 days from 29 December 2010. In comparison with RTG and OSTIA SST data, sensible and latent heat fluexes estimated by numerical simulation with FNL data were higher than those with RTG and OSTIA SST data, due to higher sea surface temperature of FNL. General distribution of RTG and OSTIA SST showed similar, however, fine spatial differences appear in near western coast of the peninsula. Estimated snow fall amount with OSTIA SST was occurred far from the western coast because of higher SST over sea far from coast than that near coast. On the other hand, snowfall amount near coast is larger than that over distance sea in simulation with RTG SST. The difference of snowfall amount between numerical assessment with RTG and OSTIA is induced from the fine difference of SST spatial distributions over the Yellow sea. So, the prediction accuracy of snowfall amount is strongly associated with the SST distribution not only over near coast but also over far from the western coast of the Korean peninsula.

An exotic parasitic wasp Anisopteromalus apiovorus of Pteromalidae was newly recorded in Korea. Specimens of this species have been collected in Gimhae of Korea since 2012. External morphology of this species was described in detail and diagnostic differences of this species from the related species and the host insect were also given. The funicle segments of female antennae are 1.2 to 1.5 times longer than those of Anisopteromalus calandrae, an sister species. Body color is gold-glossy black and with dense creamy-white hairs on the surface. This exotic species has been originated from the African continent including Democratic Republic of Congo and Cote d'Ivoire, and then intruded into other countries, for instance, Korea. This is the first distribution record of this species except the country of origin after original description as a new species. Although little is known about the life history or ecology of this species, we found that a new host of this small parasitic wasp is Lasioderma serricorne of coleoptera through present study. And this species possibly be a new agent of biological control for economic pests. It was presumed that the invasion of Anisopteromalus apiovorus into Korea was prior to November of 2012.

Metcalfa pruinosa was considered to be a very harmful invasive species, due to its high species density in nature and wide range of its host plants. M. pruinosa was distributed in 28 sites among 143 sites. M. pruinosa has wide range and diverse host plants of 52 families 110 species including crop, fruits and forest trees. At present, the identified host plant of M. pruinosa are composed of 62 families and 145 species in total since their first appearance was reported. M. pruinosa was found in roadside 46.7%, followed by forests 33.3% and orchard 20%. Nymphs and adults cause damage to crop and orchard by sucking juice, outbreak of fungi through secretion of wax, and reduction of plant assimilation due to the nectar of nymphs. Also, it reduces the merchantable quality of fruits and thus causes economic damage. It is judged that M. pruinosa has been moved along major road via the traffic vehicles.

본 연구에서는 유입유사에 따른 저수지 내 퇴사 분포를 정량적으로 분석하고 효율적인 저수지 관리를 위하여 2차원 수리 유동 모형인 RMA-2와 유사이송 모형 SED2D를 사용하여 76년 장기 퇴사분포를 예측하였다. 모형의 입력 자료인 수위-유량자료는 한국수자원공사에서 관측한 실시간 자료를 활용하였으며, 유사량 자료는 한국수자원공사에서 개발한 K-DRUM 모형을 사용하여 대상영역의 유사량 값을 산정하여 적용하였다. 또한 갈수기시 저수지내 단면 코어채취를 수행하여 퇴적깊이를 모형 결과와 비교하였다. 검증결과 저수지 내 퇴적깊이는 비교적 실측값과 유사하게 나타났다. 장기 퇴사분포예측은 2012년 실측한 지형자료를 시작단면으로 하여 2088년까지 76년간 모의를 수행하였다. 모의결과 합천댐 상류구간에서 1.63~1.26m, 하류구간에서 1.45~0.007m의 퇴적층이 형성되었으며, 전체적으로 침식보다 퇴적이 우세한 결과를 보였다.

Total organic carbon(TOC), Total nitrogen(TN), and carbon and nitrogen stable isotopes were measured in the sediment and suspended parties in fresh lake water and saline estuarine water to determine the sources of Particulate organic matter(POM) in the sediments of the Youngsan river estuary. POM in the freshwater discharge water was mostly phytoplankton origin with little trace of terrestrial plants. POM from phytoplankton blooms formed in estuarine water in response to the nutrient enriched freshwater discharges was the most important sources of POM in the sediment near the dike, comprising more than 40% of the total organic matter. POM from freshwater phytoplankton and oceanic phytoplankton were also important sources of the sediment POM, and their contributions varied with the distances from the dike. Contribution of freshwater phytoplankton to sediment POM decreased from the dike to the outside of the estuary.

홍수시 하천의 유속을 효율적이고 안전하게 측정할 수 있는 방법의 하나로 제시된 것이 표면 영상 유속 측정법이다. 일반적인 표면영상유속계(SIV)는 두장의 정지영상에서 영상 조각을 잘라낸 뒤 여기에 상호상관법을 적용하여 유속을 산정한다. 이 방법은 짧은 시간간격의 유속분포 측정에 매우 효율적이다. 그러나 장시간의 평균 유속장을 산정하는 데는 많은 시간이 소요되며, 순간 유속장을 산정하기 때문에 흐름 조건이나 촬영 조건에 따라 생기는 잡음이나 불확실성의 영향을 많이 받게 된다. 이를 개선하고자 개발된 방법이 시공간 영상을 이용하여 일정 시간동안의 유속의 평균을 한번에 산정하는 시공간영상유속계측법(STIV)이다. 시공간영상유속계측법 중의 하나인 휘도경사텐서법은 일정 시간동안의 시공간 영상을 한 번에 분석하기 때문에, 유속 산정 시간을 획기적으로 줄일 수 있는 장점이 있다. 그러나 이 방법은 하천의 일방향 유속만을 계산할 수 있기 때문에 구조물 주변이나 만곡이 있는 경우의 2차원 흐름 측정은 불가능하다는 한계가 있다. 이를 개선하기 위해서 본 연구에서는 상호상관법을 이용하여 2차원적으로 시공간 영상을 분석하는 방법(상호상관 시공간영상유속계측법)을 개발하였다. 이 방법은 시공간영상에서 시간축 방향으로 상관분석을 통해 영상변위를 산정하는 방법이다. 기존의 시공간영상분석기법 중 하나인 휘도경사텐서법이 주흐름 방향만 분석이 가능하였던 데 비하여, 상호상관 시공간 영상분석법은 2차원 유속분포 측정이 가능하고, 시간적인 평균을 취하기 때문에, 공간 해상도가 높으며, 전체적인 유속 분석시간이 매우 짧아지는 장점이 있다. 또한 공동 흐름에 대한 인공 영상을 이용한 오차 분석결과 최대 10% 이내, 평균적으로 5% 이하의 오차를 보여 상당히 정확하게 2차원 유속분포 측정이 가능한 것으로 나타났다.

Mercury distribution and hazardous characteristics of major components from SCFLs (Spent compact fluorescent lamps)for 3 lamp manufactures (A, B, C) are estimated by the analysis of mercury concentration and leaching tests such asKorean Extraction Test (KET) and Toxicity Characteristic Leaching Procedure (TCLP). SCFLs can be separated into glasstube, phosphor powder, metals, ballast, plastics, and binder. Through the analysis of mercury in major components forSCFL, mercury concentration in phosphor powder is much higher than that in other components regardless manufacturesof lamp. Also, mercury concentration in phosphor powder is dependent of the manufactures of lamp. From the leachingtests, all components except phosphor powder from 3 lamp manufactures are verified to be non-hazardous waste becauseall leaching concentrations are below the regulatory level. However, the leaching concentration of mercury in phosphorpowder of SCFLs is higher than the regulatory level in both KET and TCLP regardless manufactures of lamp. Hence,phosphor powder should be managed as a hazardous waste and should be separately managed to control mercury.

This paper examined energy consumption distribution by process and energy production-effect of MBT facilities inKorea. Generally, facilities that use fossil fuels for drying consumed energy about 70~80% in drying and exhaust gasestreatment process and energy distribution was heavily affected a position of drying and a kind of fuel. Energy production-effect by the ratio of input-energy to output-energy ranged from 4.54 to 9.60, however, if generation efficiency is reflected,it was standardized to low levels from 3.10~3.77. So we were able to confirm that the superiority of energy production-effect between facilities is not considerable.

본 연구는 국내를 대표하는 모래하천 낙동강에서 하안식생의 분포와 환경요인의 상관관계를 규명하기 위하여 수행하였다. 경상북도 안동시의 낙동강 일대에서 자연제방 5곳을 실험구간으로 선정하고 84개의 방형구를 설치하여 식물상, 식생피도, 평수위기준상대고도, 토양의 수분함량, 유기물함량, pH, 전기전도도 및 토성분석을 실시하였다. 식생단면조사의 피도값과 환경자료를 바탕으로 정준대응분석(Canonical correspondence analysis)을 실시한 결과 각 식물종은 평수위기준상대고도, 유기물함량, 모래함량 등에 의하여 3개의 그룹으로 구분되었으며 하천의 식생분포에 가장 큰 영향력을 끼치는 환경인자는 평수위기준상대고도로 나타났다.

A composite precast slab will be an economical alternative in case of constructing on a extremely cold region like antarctic. Side ratio optimization of the slab should be performed to solve the difficulties of using construction equipments and moving materials. Optimized side ratios by FEM and orthotropic plate theory are calculated and the results can be used to design the composite precast slabs.

We plan to run the two-dimensional and three-dimensional finite element analysis to build a tunnel behavior DB along the fracture zone for making the development of behavior characterization method of construction of the destabilizing factors for each of the future.

Agreement in the vertical profiles of the temperature trends from radiosonde observation (HadAT) and four kinds of reanalysis dataset (ERA40, ERA-I, NCEP-DOE, and 20CR) are examined for the period of 1979-2000. There are noticeable spread among reanalysis and observation datasets in the temperature trend depending on region and vertical level. East Asia shows large discrepancy among datasets, while Europe shows relatively good agreement. Generally, biases in temperature trends are larger in the upper troposphere (above 300 hPa) than in the lower and middle troposphere. Comprehensive comparison of the long-term temperature trends among reanalyses is made for horizontal distributions with height, latitude-pressure cross-sectional distributions, zonally-averaged meridional distributions with height, and area-averaged vertical profiles in both DJF and JJA. Consequently, we find that the degree of agreement among reanalyses significantly varies with vertical level, region, and season. The highest discrepancy is found over southern high-latitudes and in the upper troposphere over southern tropics. In the tropical upper troposphere above 200 hPa, observation (HadAT) shows cooling trend increases with height, but three reanalyses show warming trends except NCEP-DOE reanalysis in which cooling trend is overestimated. In conclusion, discrepancies in the vertical profiles of long-term temperature trends among four kinds of reanalysis datasets are quite large, and then a scrupulous approach should be needed when reanalysis dataset is used for climate change study.

The brominated flame retardants (BFRs) have been used in many household products such as plastics of electronicequipment, furniture, textiles to increase their flame ignition resistance. Among the mixtures of BFRs, polybrominateddiphenyl ethers (PBDEs), tetrabromobisphenol A (TBBPA), hexabromocyclododecane (HBCD) have been widely usedas commercial additive during the last decade. This study has been performed to investigate the concentration of BFRsin waste electrical and electronic equipment which has potential threat on environment and human health. We analyzedPBDEs, TBBPA and HBCD in 18 products from 2 TV manufacturing companies, 19 parts from 3 refrigerators, shreddedplastic from recycling center, 3 other plastics from recovery process, and 43 small electronics using heating source. Theconcentration of PBDEs in TVs ranged from 306mg/kg (manufactured since the year of 2000) to 145,027mg/kg(manufactured in 1983~1997). The concentration range of PBDEs in rear housing is greater than those of front cover.The concentration of TBBPA were detected from 30 to 201mg/kg and HBCD was not detected (ND) in all samples ofTV. The PBDEs concentrations in plastics of refrigerator waste were detected from ND to 445mg/kg, the concentrationof PBDEs in upper housing cover is higher than those of other parts. The concentration of PBDEs in small electronicswas not detected in most products but HBCD and TBBPA were detected several hundred ppm in 1mixer and severaldozen of ppm in 1mixer, 1 coffee port and 2 electronic rice cookers, respectively. Based on the concentrationcharacteristics of BFRs in waste electrical and electronic equipment, we will be established the environmentally soundstrategies for the management policies of the waste containing BFRs.