This experiment was conducted to comparison study on the productivity for certified varieties of import adaptability of silage corn in Pyeongchang area. Total eight varieties (Gangpyeongok, 31N27, 32P75, 32W86, P3156, P3394, DK 689 및 DK 729) were evaluated. The experimental design was 8 treatment of randomized block with three replications. Corn varieties were cultivated in experimental field of Pyeongchang campus, SNU from 1 May to 2 September, 2015 and plot size was 15㎡. Plant height of 32W86 and ear height of Gwanpyeongok was the highest (p<0.05). Tasseling and silking date was 27 July-3 August and silking occurred after 1-3 day of tasseling. Average day to silking was 92 days and that of 31N27 variety was short (p<0.05). The varieties of DeKalbo Company (DK 689 and DK 729) required more times to silking. Average GDD (growth degree day) of eight varieties was 1,023℃ and P3352 was the lowest GDD. In the trials of resistance evaluation, P3394 was strong in disease, P3156 was the highest in insect. All varieties did not show the lodging and variety of DK 729 showed the highest stay green score (p<0.05). Average dry matter content was 30.77%, it showed higher trend in DM. 32W86 was the highest DM content among the varieties, but there was no significant difference among varieties (p>0.05). The weight per ear was the highest in 32W86 and the lowest in Gwanpyeongok. The ration of ear to whole plant was higher in 32W86 and P3394, but it was not found the significant difference (p>0.05). Average yield of fresh and DM was 59,017 and 13,476 kg/ha, respectively. DK 689 showed higher DM and TDN yield than others, but there was not significant difference (p>0.05). According to results, the difference of productivity was not found among certified variety of import adaptability of silage corn. The varieties Gwanpyeongok, 32W86 and 32P75 would be recommendable in Pyeongchang area for stable cultivation.

This study was conducted to find out the effects of over seeding using new grass varieties orchardgrass ‘Kordione’ and ‘Onnuri’, and tall fescue ‘Greenmaster’ on botanical composition and dry matter productivity from 2013 to 2016 in low productivity hilly pasture, middle area of Korea. There were used 3 grass seed mixture types made of different compositions and amounts {T1: control - no over seeding, T2: tall fescue (TF) ‘Greenmaster’ 18 kg ha-1, orchardgrass (OG) ‘Kordione’ 9 kg ha-1, Perennial ryegrass (PRG) ‘Linn’ 5 kg ha-1, and Kentucky bluegrass (KBG) ‘Kenblue’ 2 kg ha-1, T3: TF ‘Greenmaster’ 9 kg ha-1, OG ‘Kordione’ 18 kg ha-1, PRG ‘Linn’ 5 kg ha-1, and KBG ‘ Kenblue’ 2 kg ha-1, T4: TF ‘Greenmaster’ 9 kg ha-1, OG ‘Onnuri’ 18 kg ha-1, PRG ‘Linn’ 5 kg ha-1, and KBG ‘Kenblue’ 2 kg ha-1}. In the botanical composition of grassland, T1 nearly remained constant in other seasons while ratio of weeds were increased in summer season. T2 was better than control (T1) in portion of grass ratio, which has increased by 80%. In the early time of establishment, the portions of OG were increased in T2, but TF rate was increased after 3 years later when grass was established. T3 and T4 showed a very similar patterns, grass ratio had increased by 80% and the portion of KBG had increased as time passed. T2 (129,763 kg ha-1) was showed the highest dry matter yield than other treatments (T1: 6,756 kg ha-1, T3: 9641, and T4: 10,738) in 2016.

Productivity improvement is one of the important goals which firms’ technology developments aim at. Firms’ improved productivity from technology development means that their inputs can produce more outputs through technology development, which makes firms’ productivity improvement from technology development more and more important in the age of technology advance and convergence like today. This research empirically analyzes the influence of the external technology collaboration network diversity on the productivity improvement of the small and medium-sized enterprises (SMEs) from technology development and the moderating effect of the chief technology officer (CTO)-driven technology development on this influence. This study constructs the research model reflecting the moderating impact of the CTO-driven technology development and tests it with the ordinary least squares regression through the IBM SPSS version 23 by using the 2,000 data about South Korean SMEs. This research empirically reveals two points. One is that SMEs’ external technology collaboration network diversity has a positive influence on their productivity improvement from technology development. The other is that the positive effect of SMEs’ external technology collaboration network diversity on their productivity improvement from technology development is moderated by the CTO-driven technology development. The two points revealed in this study present two meaningful implications in not only the practical but also academic point of view. The practical implication is that it is effective for SMEs to use CTOs in increasing their productivity improvement from technology development. The academic implication is that making technology collaboration with more diverse external partners can increase SMEs’ productivity improvement from technology development.

봄철 건조기후로 인해 봄철 표고버섯 생산량이 감소하므로서 표고 원목재배임가에서는 어려움을 호소하고 있다. 이에 표고 원목재배에서 봄철 건조시기에 표고버섯의 생산성을 높이기 위한 시험을 실시하였다. 표고 원목재배 재배하우스 내에서 2014년 ‘산조502호’ 품종을 접종하여 배양중인 버섯목에 대하여 건표고용 봄버섯이 발생되는 시기인 2016년 3월 중순에서 4월초까지 비닐피복(0.05mm) 시험구와 비닐피복하지 않은 시험 구(각 처리구별 22본)를 처리하여 자실체 발생량, 버섯품질, 온습도 등을 조사하였다. 피복내외의 온습도 환경 조사를 위해 표고 재배사 내에 피복 처리구와 무피복 처리구구에 온습도기록기를 설치하고 2016년 봄철에 접어들어 처음으로 표고가 발이 되기 시작한 3월 21일부터 버섯수확을 마치고 피복을 제거한 4월 12일까 지 온도(최고, 최저)와 습도(최고, 최저)를 시험구별로 분석한 결과, 최고온도는 무피복 처리구가 0.7°C 높은 반면 최저온도는 피복처리구가 1.2°C가 높아 피복효과가 나타났다. 습도를 보면 최고습도는 피복 처리구가 2.6% 높아 많은 차이를 보이지 않았으나 최저습도의 경우는 피복처리구가 10.3% 높아 버섯 생산량과 버섯품 질을 결정하는 결정적인 요인으로 작용하는 것으로 보였다. 처리구별 버섯 발생량 및 발생 수량을 살펴보면, 각 시험구에서 처리 8일후(3월 29일)부터 버섯이 발생되기 시작하여 4월 10일에 모든 버섯 수확이 완료되었다. 총 버섯수확량은 피복 처리구에서 11,145g의 버섯이 수확되어 무피복 처리구에서 발생한 5,330g에 비하여 두배 이상의 월등히 많은 양의 버섯이 수확되었을 뿐 아니라 버섯 발생 개수도 무피복 처리구가 208개에 비해 348개로 많이 발생되었으며 개체중량 또한 25.6g에 비하여 32.0g으로 6.4g 중량이 높게 나타났다.

This study is intended to look into the effects of employee's working environment on work loss and productivity in overseas construction sites of Korean construction companies. To achieve this, a survey was empirically carried out to overseas construction site experts. The results were as follows. The weight by 5 loss factors of overseas construction projects showed that project management environment was the highest, followed by construction company environment, owner environment, government support environment and entry country environment, which the biggest work loss factor was the project management section. The weight by loss factors of entry country environment showed that local environment was highest, followed by social environment, economical environment, political environment and cultural environment. In other words, awareness and management of weak social bases, which are not well-institutionalized as properties of most preferred loss, are important in that local environment of new entry countries is the most important thing. As for the above-mentioned findings, the most important project management of overseas construction projects will need to take advantage and have know-how for construction companies' ability to cope with a crisis or the most preferred management and loss prevention of owner environment, government support environment and entry country environment.

This study investigates application cases of facility management system model for enhancing facility productivity of industry filed around medium and small facility processing companies and finds the inefficiency of the existing management model. Following items are researched to seek out methods and measures to maximize facility productivity through empirical analysis by exploring and establishing a new management model. First, the empirical analysis, it is found that the overall equipment efficiency index used for facility productivity management in the companies has a difficulty being used as the index for it in actual medium-small processing companies. Second, a new facility management system model applying standard cycle time is suggested among facility management index system to measure facility productivity. Third, the empirical analysis is used to verify that developed facility management system model is a useful method to manage the facility productivity by applying the model to actual medium-small processing companies. Finally, it is necessary to implement comparison analysis on whether actual productivity enhancement induces a distinctly different result by using a new facility management index system model to be inhibited in this study.

This study empirically analyzes the effect of IT SME ventures’ external information network diversity on their production period reduction and productivity improvement generated from technology development. This research constructs a mediating model based on the open innovation perspective and tests it with the 138 samples of South Korean IT SME ventures based on the ordinary least squares regression. This research is expected to make a good contribution by shedding a new light on the following three points about the critical role of IT SME ventures’ external information network diversity in increasing their production period reduction and productivity improvement generated from technology development which has scarcely been illuminated in the extant studies in the field of the management of technology for SMEs. First, IT SME ventures’ external information network diversity positively influences their production period reduction. Second, the external information network diversity positively influences IT SMEs’ ventures’ productivity improvement. Third, IT SME ventures’ production period reduction partially mediates the influence of IT SME ventures’ external network diversity on their productivity improvement. These three fresh points are expected to provide useful theoretical and practical implications. Related to the theoretical implication, this research provides a fresh implication that IT SME ventures’ external information network diversity positively influences not only their production period reduction but also productivity improvement generated from technology development. Concerning the practical implication, this study suggests that the CEOs in IT SME ventures make strategic efforts to use more diverse external information sources in order to increase their production period reduction and productivity improvement generated from technology development.

This paper provides a basic organizational commitment research for the study was conducted academic research, especially acidic improvements in the construction industry for a job commitment on organizational commitment. In this paper, first results are derived for literature to study and improve productivity and derive a major cause of job involvement of construction companies based on it for critical that the rationale organization.

This experiment was carried out to study the effect of rice black-streaked dwarf virus(RBSDV) infection rate on forage productivity of corn varieties in Cheonan of chungcheongnamdo from 2006 to 2008. Forage corn varieties of 10 were cultivated with first cropping(seeding in the last ten days of April) and second cropping(seeding in the last ten days of May) system in field and tested the infection rates of RBSDV and productivity of forage. The Infection rate of RBSDV was significant difference between corn varieties in middle district of Korea. Resistant corn varieties for RBSDV were ‘Kwanganok’, ‘P3156’, ‘Kwangpeyongok’ and ‘P3394’ but susceptible varieties were ‘Suwon19’, ‘DK697’, ‘GW6959’ and NC+7117. Dry matter(DM) yield of forage corn according with infection rates of RBSDV in field was significant difference between varieties(p<0.05). DM yield of susceptible varieties, ‘Suwon 19’, ‘DK697’ and ‘GW6959’ was lower about 20% than that of resistant varieties, ‘Kwangpeyongok’ and ‘P3156’. For increasing the productivity of forage corn, recommend of resistant varieties for RBSDV and control of seeding time are very important in middle district of Korea.

A new naked oat cultivar, ‘Jungmo2005’(Avena nuda L.), was developed for food and forage use by National Institute of Crop Science, RDA in 2010. It was derived from a cross between F1[‘Early80’/‘Gwiri33’] and F1[‘Early80’/‘Gwiri23’]. ‘Early80’, a covered oats, has early heading and high yielding, while ‘Gwiri23’ of covered type and ‘Gwiri33’ of naked type has early heading with large-size grain. ‘Jungmo2005’ has the characteristics of narrow and long leaves of pale green color, middle diameter culm of yellow color and medium grain of whitish yellow color. Cultivar ‘Jungmo2005’ had 2 days earlier heading date (May 9) than the check cultivar ‘Seonyang’ (May 11) in field condition. The ‘Jungmo2005’ showed better winter hardiness than that of the check cultivar, and similar to the check cultivar in respect to lodging resistance. The ‘Jungmo2005’ had 105 cm of culm length, 21.5 cm of spike length, 658 spikes per m2, 82 grains per spike, 23.3 g of 1,000-grain weight, and 622 g of test weight. The grain yield of ‘Jungmo2005’ was averaged 3.38 MT ha-1, which was 6% higher than that of the check. Average forage fresh and dry matter yield of ‘Jungmo2005’ harvested at milk-ripe stage were 44.8 and 12.6 tone ha-1, respectively, compared with 47.5 and 12.5 tone ha-1 of the check. The protein content of the ‘Jungmo2005’ was similar to the check (7.6% and 7.5%, respectively), while ADF (28.6%) and NDF (51.5%) were lower than the check (31.4% and 57.0%, respectively). TDN content and RFV were higher than those of the check (66.3%, 120.3 and 64.1, 105.2, respectively). ‘Jungmo2005’ is recommended for fall sowing cropping only in the south area where daily minimum mean temperatures are averaged higher than -4 ℃ in January, and it should not be cultivated in mountain areas, where frost damages is likely to occur. The areas would do better only to sow in spring season.

This experiment was carried out in experiment field at Hoengseong from March to July 2015 to evaluate the seed productivity and feed value of oats (Avena sativa L.) according to the difference of seeding date. The experiment was arranged randomized complete design with three replications. The treatments were consisted of three seeding dates (12, 22 March and 2 April). The emergence and heading of oat showed a tendency to accelerate as the seeding date was delayed while the number of days taken for the flowering after the heading remained unchanged. The plant height, panicle length, number of culm, and number of panicle all tended to decrease with the delay of seeding date. The seed yield showed a significant difference with 3.55 ton/ha in 12 March and 2.38 ton/ha in 2 April (p<0.05). The dry matter yield also showed significantly different in 12 March and 2 April which were 6.57 ton/ha and 4.56 ton/ha, respectively (p<0.05). The feed value measured as CP (crude pretein), NDF (neutral detergent fiber), ADF (acid detergent fiber) and DMD (dry matter digestibility) showed no difference according to the seeding date. In the case of RFV (relative feed value), a decrease with the delay of seeding date was observed but only an insignificant difference (p>0.05). As the purpose of this study was not production of roughage but that of the seed, cultivation was in the full-ripe period, hence a relatively low feed value. In conclusion, it is considered that the appropriate seeding date for a spring cultivation of oats for the purpose of seed production in Hoengseong is in early March regarding growth characteristics, seed yield, and feed value.

The objective of this study was to determine the growth characteristics of cool (C1) and warm season grasses (C2) in pastures mixed with C1 and C2 at an altitude of 400 m in Jeju island to establishing pasture suitable for grazing horses and to evaluate the effect of pastures mixed with tall and short type grasses on the intake characteristics of horses. C1 used in this study was Kentucky bluegrass, redtop (short type grass) and tall type grasses were orchardgrass and tall fescue, respectively. Treatments of this study were consisted of four groups and the short type grass used in pastures mixed with C1 and C2 was mainly bermudagrass. Four treatment groups were follow as; Treatment 1 (bermudagrass + Kentucky bluegrass + redtop) 2) Treatment 2 (bermudagrass + tall fescue + orchardgrass) 3) Treatment 3 (Kentucky bluegrass + redtop) 4) Treatment 4 (tall fescue + orchardgrass). Bermudagrass was a little winter killing and inhibition of plant growth at an altitude of 400 m. Plant heights in pastures mixed with C1 and C2 were grown better than that in pastures mixed with C1. Especially, plant height in Treatment 4 was higher than other treatments. Dry matter yield was in the following order: Treatment 4> Treatment 3> Treatment 2> Treatment 1. Dry matter yield in pastures mixed with C1 increased as compared with pastures mixed with C1 and C2. Dry matter yield in Treatment 3 was higher than other treatments. In the first investigation regarding vegetation distribution, bermudagrass ratios among grasses in Treatment 1 and Treatment 2 were 11.7 and 13.3%, respectively. The growth of bermudagrass in winter was low due to the cold damage. However the growth of Kentucky bluegrass, redtop, tall fescue and orchardgrass was good. In the second investigation, bermudagrass ratios among grasses in Treatment 1 and Treatment 2 were 5.0 and 11.7%, respectively. Growth of forage in the second investigation was poor as compared to the first investigation. nutritive values(crude protein content, neutral detergent fiber content, acid detergent fiber content, digestibility) were good in pastures mixed with C1 Especially, nutritive values in pastures mixed with tall was higher than those of pastures mixed short grasses. P content among minerals in Treatment 1 was higher than other groups. However, the content of Ca, Mg and Mn were lower. The contents of Ca, K, Mg, Na, Cu, Zn and Fe in Treatment 2 were higher. However, the contents of K, Mg, Na, Cu, Zn and Fe in Treatment 3 were lower. Therefore, we suggest that cool season grasses with short grasses were sowed to establishing pasture suitable for grazing horses at an altitude of 400 m in Jeju island.

본 연구는 2014년 7월부터 2015년 9월까지 제주 한국마 사회 제주육성목장(해발 450m) 시험포장에서 여름 동안 생산성이 유지될 수 있는 남방형 목초를 도입하여 재배에 이용하기 위하여 Bermudagrass 품종(Cynodon dactylon (L.) Pers. : Giant, Cheyene, Mohawk, Panchero Frio, Common) 과 Bahiagrass 품종(Paspalum notatum : TifQuik, Tifton 9, Argentine), 그리고 Teff grass(Eragrostis tef : Tiffany) 품종 의 생육특성 및 건물 수량을 평가하기 위하여 실시하였다. 실험설계는 품종을 처리로 10처리 3반복 난괴법으로 배치 하였다. 1차년도 1차 수확은 8월 31일, 2차 수확은 9월 21일이며 2차년도 1차 수확은 7월 22일, 2차 수확은 8월 14 일, 3차 수확은 9월 11일로 성장단계를 고려하여 수확하였 다. 1차년도 남방형 품종의 건물 수량은 Teff grass의 Tiffany가 산파와 조파 각각에서 2.59와 2.00Ton/ha로 가 장 높은 건물수량을 나타내었으며, Bermudagrass의 Common이 산파에서 1.21Ton/ha로 다년생 남방형 목초 중 가장 높은 수량을 나타내었다. 2차년도 남방형 품종의 건물 수량은 Bahiagrass의 Tifton9이 산파에서 15.06Ton/ ha로 가장 높은 수량을 나타내었으며 Bahiagrass의 Tifquik이 산파에서 14.68Ton/ha로 두 번째로 높은 수량을 나타내었다. 조단백질 함량은 Bahiagrass의 Argentine이 19.75%로 가장 높게 나타났으며 NDF 함량은 Bermudagrass 의 common이 61.69%로 가장 높은 것으로 나타났다. 한해 에 의한 피해의 경우 대부분의 Bermudagrass 품종의 경우 에 동절기 적응성이 떨어졌으나 Bahiagrass의 Tifton 9 품 종의 경우 한해에 대한 피해를 거의 받지 않았으며 출현, 내병성, 내습성, 도복성은 품종 간 차이가 거의 없었으며 Teff grass의 Tiffany이 도복과 습해에 의한 피해가 나타났다. 이상의 결과를 종합해 볼 때 제주지역에서 Bermudagrass와 Bahiagrass의 일부 품종은 월동할 수 있어 여름철 조사료자 원으로 활용이 가능하지만, 품종 간 내한성 능력과 재생능 력이 다르므로 이를 고려하여 품종을 선택할 필요가 있다.

This study was conducted to ameliorate the productive performance of Hanwoo cow using hill pasture grazing system. Twenty seven animals aged 9 were designed to divide with 3 groups which were Control (restricted concentrate and hay for 5 months), T1 (restricted concentrate and pasture grazing ad libitum for 5 months) and T2 (restricted concentrate, 30 g/head of mineral nutrients and pasture grazing ad libitum for 5 months). Average daily gains increased higher in the order of T2, Control and T1. The conception rate of Control, T1 and T2 after artificial insemination during post-grazing period were 88.9%, 100%, 100%, respectively. In conclusion, the results indicated that hill pasture grazing system might enhance not only the productive performance of Hanwoo cow but also profit for conventional feeding system.

The objective of this study was to determine the growth characteristics of cool (C1) and warm season grasses (C2) in pastures mixed with C1 and C2 suitable for grazing horses and effect of pastures mixed with tall and short grasses on the intake characteristics of horses. C1 used in this study was Kentucky bluegrass, Redtop (short type grass) and tall type grasses were orchardgrass and tall fescue, respectively. The short type grass used as C2 was Bermudagrass. This study had the following four treatment groups: 1) Treatment 1 (Bermudagrass + Kentucky bluegrass + Redtop) 2) Treatment 2 (Bermudagrass + tall fescue + orchardgrass) 3) Treatment 3 (Kentucky bluegrass + Redtop) 4) Treatment 4 (tall fescue + orchardgrass). There was no winterkilling or lodging problem at an altitude of 200 m. Plant heights in mixed pasture of Treatment 1, 2, 3, and 4 were 53.9, 58.2, 57.5, and 78.1 cm, respectively. Plant height was the highest in Treatment 4. Dry matter yield was in the following order : Treatment 4 > Treatment 3 > Treatment 2 > Treatment 1. In the first investigation regarding vegetation distribution, Bermudagrass ratios among grasses in Treatment 1 and Treatment 2 were 70% and 66.7%, respectively. Overall, other grasses showed poor growth. In the second investigation of vegetation distribution, Bermudagrass ratios among grasses in Treatment 1 and Treatment 2 were 80% and 60.7%, respectively. Crude protein content, neutral detergent fiber content, acid detergent fiber content, digestibility value, and nutritive values were the lowest in Treatment 4, followed by those in Treatment 1, Treatment 2 and Treatment 3.

This study was carried out to determine the effects of application levels of fertilizer and sowing methods on yields and nutritive values of Italian ryegrass (IRG) in early spring. Five fertilizer levels were used: Treatment 1, 100-80-80 kg/ha; Treatment 2, 120-100-100 kg/ha; Treatment 3, 140-120-120 kg/ha; Treatment 4, 160-140-140 kg/ha; Treatment 5, 140-120-120 kg/ha of N-P2O5-K2O with silicate fertilizer 200 kg/ha. Dry matter (DM) yield was 8,330 kg/ha in Treatment 5, 7,686 kg/ha in Treatment 4, and 7,347 kg/ha in Treatment 3. There was no significant difference in total digestible nutrients (TDN) content. The content of crude protein was the highest in Treatment 5. Dry matter ratio was the lowest in Treatment 5. In Treatment 3, DM yield was 7,347 kg/ha, when total amounts of fertilizers were applied at one time. However, DM yield was 7,405 kg/ha, when 50% of pre-planting fertilizer and 50% of supplementary fertilizer were applied at different time. There was no significant difference between total application and split application of fertilizers. However, DM yield was 9,469 kg/ha in application treatment with 100 kg/ha of additional urea at three to four leaf stages of IRG. Regarding DM yield by sowing methods of IRG, the following order was found: drill seeding (8,176 kg/ha) > rotary-broadcast seeding-stamping (7,957 kg/ha) > rotary-broadcast seeding (7,810 kg/ha) > broadcast seeding (7,347 kg/ha) > broadcast seeding-rotary (7,034 kg/ha). DM yield (59.57%) was the lowest in broadcast seedingrotary. Crude protein content was the highest with rotary work but the lowest with broadcast seeding.

The goals of enterprises are to use resources efficiently, minimize the costs or reduce unsuitable products with efficient process or production environment and take competitive advantages through efforts such as proper supply of good products, etc. so as to satisfy diversified customers and survive in rough competition. To reduce production costs, it’s inevitable to make unsuitable products during the production in manufacturing process. Therefore, this researcher grasped LED assembly process and drew the results of productivity improvement through process analysis so as to improve productivity by process anlaysis.