검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 5,647

        181.
        2022.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study aimed to investigate pesticide residues in 160 stalk and stem vegetables marketed in Northern Gyeonggi-do. The QuEChERS method using GC-MS/MS and LC-MS/MS was employed to analyze the residues of 341 pesticides in the samples. The maximum or lower than the residue limit was recorded in 75 samples (46.9%), while 4 samples (2.5%) exceeded the maximum residue limit (MRL). Thirty-nine kinds of residual pesticides were detected including fungicides (14), insecticides (22), herbicides (2), and plant growth regulator (1). Carbendazim and pendimethalin were the most frequelntly detected pesticides. Fenitrothion, procymidone, and diazinon exceeded MRL in garlic chives, and Welsh onion. This indicated that these vegetables along with water celery should be constantly monitored.
        4,000원
        182.
        2022.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The official analytical method for the analysis of harmful heavy metals in Meju, distributed in Korea, employs a strong acid to decompose the organic components. This analysis is time consuming and harmful to the users and/or the environment. This study aimed to develop a new pre-treatment technology using laser ablation, to rapidly analyze harmful heavy metals without using strong acids. The results obtained from this method were validated by the National Institute of Food and Drug Safety Evaluation guideline (NIFDS, 2016). Moreover, a comparison of the two methods showed that the analytical time for 55 Meju samples was shortened by 96% or more in the new method. The results showed no significant difference in the recovery ranging from 90–120%. The proposed method proved suitable for detecting harmful heavy metals in Meju.
        4,000원
        183.
        2022.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study was conducted to estimate the damage of Whole Crop Maize (WCM) according to abnormal climate using machine learning and present the damage through mapping. The collected WCM data was 3,232. The climate data was collected from the Korea Meteorological Administration's meteorological data open portal. Deep Crossing is used for the machine learning model. The damage was calculated using climate data from the Automated Synoptic Observing System (95 sites) by machine learning. The damage was calculated by difference between the Dry matter yield (DMY)normal and DMYabnormal. The normal climate was set as the 40-year of climate data according to the year of WCM data (1978~2017). The level of abnormal climate was set as a multiple of the standard deviation applying the World Meteorological Organization(WMO) standard. The DMYnormal was ranged from 13,845~19,347 kg/ha. The damage of WCM was differed according to region and level of abnormal climate and ranged from -305 to 310, -54 to 89, and -610 to 813 kg/ha bnormal temperature, precipitation, and wind speed, respectively. The maximum damage was 310 kg/ha when the abnormal temperature was +2 level (+1.42 ℃), 89 kg/ha when the abnormal precipitation was -2 level (-0.12 mm) and 813 kg/ha when the abnormal wind speed was -2 level (-1.60 ㎧). The damage calculated through the WMO method was presented as an mapping using QGIS. When calculating the damage of WCM due to abnormal climate, there was some blank area because there was no data. In order to calculate the damage of blank area, it would be possible to use the automatic weather system (AWS), which provides data from more sites than the automated synoptic observing system (ASOS).
        4,000원
        184.
        2022.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The present study investigated effects of microbial additives and silo density on chemical compositions, fermentation indices, and aerobic stability of whole crop rice (WCR) silage. The WCR (“Youngwoo”) was harvested at 49.7% dry matter (DM), and ensiled into 500 kg bale silo with two different compaction pressures at 430 kgf (kilogram-force)/cm2 (LOW) and 760 kgf/cm2 (HIGH) densities. All WCR forage were applied distilled water (CON) or mixed inoculants (Lactobacillus brevis 5M2 and Lactobacillus buchneri 6M1) with 1:1 ratio at 1x105 colony forming unit/g (INO). The concentrations of DM, crude protein, ether extract, crude ash, neutral detergent fiber, and acid detergent fiber of whole crop rice before ensiling were 49.7, 9.59, 2.85, 6.74, 39.7, and 21.9%, respectively. Microbial additives and silo density did not affect the chemical compositions of WCR silage (p>0.05). The INO silages had lower lactate (p<0.001), but higher propionate (p<0.001). The LOW silages had higher lactate (p=0.004). The INO silages had higher yeast count (p<0.001) and aerobic stability (p<0.001). However, microbial counts and aerobic stability were not affected by silo density. Therefore, this study concluded that fermentation quality of WCR silage improved by microbial additives, but no effects by silo density.
        4,000원
        185.
        2022.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Seoul has installed mechanical air filters in the heating, ventilation, and air conditioning (HVAC) systems of city buses to improve their indoor air quality since late 2019. We evaluated particle removal efficiencies of the filter in a wind tunnel, and clean air delivery rates (CADRs) of the systems and a household air purifier in the buses, following the test standards. The filter showed the efficiencies of 91% and 97.6%, 88% and 97.9%, and 78% and 95.2% for 0.35 μm particles and PM2.5 at 1.0m/s, 1.5m/s, and 2.0m/s, respectively. The efficiencies rose with an increase in the particle size and the filters had a minimum efficiency reporting value (MERV) rating of 15. The CADRs for PM2.5 and flow rate of the systems were 12.7m3/min and 17.9m3/min, 16.6m3/min and 25.4m3/min, 18.7m3/min and 33.6m3/min, and 23.3m3/min and 47.1m3/min on the operation mode of 1, 2, 3, and 4, respectively. The CADRs of the systems were 3.8-7.1 times higher than those of the air purifier, but single-pass removal efficiencies of the former were 0.56-0.81 lower than those of the latter.
        4,000원
        186.
        2022.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        최근 경주, 포항에 연이은 지진 발생으로 인하여 내진설계에 관심이 높아지고 있다. 다가구주택 필로티기둥은 수직 비정형 시스템으로 상,하부층의 강성 차이로 인하여 지진 발생 시 막대한 피해가 예상되기 때문에 다가구주택 필로티기둥의 내 진보강이 필요하다. 그러나 민간 소유인 다가구주택의 경우 막대한 비용과 시간으로 인하여 보강이 어려운 실정이다. 이에 따 라, 복합섬유패널로 에폭시 접착제 미사용으로 건식시공이 가능한 전단보강공법을 제안하고자 한다. 본 연구에서는 복합섬유패 널 보강 유무에 따른 내진보강공법의 전단내력을 실험을 통하여 검증하였고, 에폭시를 사용하지 않아 일체화 거동을 하지는 않 지만 복합섬유패널의 영향으로 전단내력은 1.46∼1.49배 증가하는 것으로 평가되었다. 따라서 다가구주택 필로티기둥의 내진보 강효과가 있을 것으로 판단된다.
        4,000원
        187.
        2022.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        콘크리트 경화 시 발생하는 수분증발로 인한 건조수축은 콘크리트의 균열을 발생시킨다. 콘크리트에 발생하는 균열 은 콘크리트의 내구성을 저하하여 안정성과 사용성에 문제를 발생시킨다. 이러한 문제점을 보안하기 위해 콘크리트에 강섬유를 혼입하여 건조수축으로 인한 균열을 방지하는 강섬유 보강 콘크리트 (SFRC)에 관한 연구가 진행되고 있다. 강섬유는 콘크리트 의 균열단면에서 가교역할, 부착작용을 통해 건조수축으로 인한 균열발생을 억제하고 균열 폭을 감소시키는 효과가 있다. 본 논 문에서는 강섬유의 인장강도에 따른 강섬유 보강 콘크리트의 건조수축 제어성능을 평가하였다. 자유건조수축 실험과 구속건조 수축 실험을 진행하였으며 실험 결과를 콘크리트의 인장응력으로 변환하여 콘크리트 직접인장실험 결과와 비교하였다. 강섬유 의 자유건조수축 저감 효과는 미미하지만 강섬유의 인장강도가 증가할수록 구속건조수축으로 인한 균열제어에 효과적임을 확인 하였다. 또한 강섬유의 인장강도가 증가할수록 콘크리트의 인장응력이 증가함을 확인하였다.
        4,000원
        195.
        2022.05 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        Porous ceramics have the advantages of low density, low thermal conductivity, and excellent mechanical properties. Among porous ceramic manufacturing methods, the replica template method allows the easy manufacturing of porous filters with the highest porosity and pores of the desired size, but it also has the disadvantage that the resulting filters have low mechanical strength. To overcome this shortcoming, mullite (3Al2O3·2SiO2) whiskers, which have excellent thermal stability and high mechanical strength, were introduced in porous ceramic structure. The mullite whiskers were synthesized using a composition of Al2O3, flyash and MoO3. The morphologies and crystal structures of the mullite whiskers with MoO3 contents were investigated in detail. When the porous ceramic with mullite whiskers was fabricated using 20 wt% MoO3 catalyst the most uniform microstructure was obtained, and the mullite whiskers showed the highest aspect ratio of 47.03. The porosity and compressive strength of the fabricated porous ceramic were 82.12% and 0.83 MPa, respectively.
        4,000원
        197.
        2022.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 논문은 CFD 해석법을 이용한 단일선체 및 이중선체 선박의 손상에 따른 기름 유출량 추정 결과를 소개한다. 수치해석 기법 으로 다상유동 해석법을 사용하고 기름 유출 유동에 대한 다양한 수치해석적 조건의 변화에 대한 영향을 조사하였다. 좌초 또는 충돌에 의한 다양한 손상 조건에서의 기름 유출량의 변화를 해석하였으며 실험 결과를 통해 검증하였다. 본 논문의 수치해석 결과는 단일선체와 이중선체의 기하학적 특성을 따라 실험 결과와 잘 일치하였다. 특별히 물과 기름의 복잡한 상호작용이 나타나는 이중선체의 기름 유출 상황도 실험과 동일하게 타당하게 예측하였다. 본 연구를 통해 사고 선박의 기름 유출량 추정에 필요한 CFD기법을 정립할 수 있었다.
        4,300원
        198.
        2022.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This research studied faults that may occur during slow charging using the J1772 adapter of Tesla Model-3 electric vehicles. When the AC terminal was instantaneously disconnected, charging was performed normally when an AC circuit with disconnection up to three disconnection times was connected. Charging control was suspended when the number of disconnection reached four times. However, if the AC disconnection time exceeded 22 seconds, the charging control was stopped regardless of the number of disconnection. When a contact failure occurred at the AC terminal, high surge current and noise occurred. However, when the contact improved, the charging control continued. In terms of safety, it seems necessary to take measures such as stopping charging control when detecting noise.
        4,000원
        199.
        2022.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In the event of an defective wire in the low-speed CAN communication of vehicle, the problem had to be solved by relying on fault codes or using expensive measuring equipment. An experiment was conducted to analyze waveforms of communication circuits with wire conditions such as normal, short circuits in the main body, and mutual short circuits. When the controller drives the CAN transceiver and transmits a message, the voltage and current waveforms were measured using an OEM oscilloscope to check for abnormalities in the circuit. As a result, it was confirmed that when a defective wire occurs in low-speed CAN communication, the CAN driver can switch to the fail-safe mode to exchange normal messages.
        4,000원
        200.
        2022.04 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        In this study, defects generated in the YSZ coating layer of the IN738LC turbine blade are investigated using an optical microscope and SEM/EDS. The blade YSZ coating layer is composed of a Y-Zr component top coat layer and a Co component bond coat layer. A large amount of Cr/Ni component that diffused from the base is also measured in the bond coat. The blade hot corrosion is concentrated on the surface of the concave part, accompanied by separation of the coating layer due to the concentration of combustion gas collisions here. In the top coating layer of the blade, cracks occur in the vertical and horizontal directions, along with pits in the top coating layer. Combustion gas components such as Na and S are contained inside the pits and cracks, so it is considered that the pits/cracks are caused by the corrosion of the combustion gases. Also, a thermally grown oxide (TGO) layer of several μm thick composed of Al oxide is observed between the top coat and the bond coat, and a similar inner TGO with a thickness of several μm is also observed between the bond coat and the matrix. A PFZ (precipitate free zone) deficient in γ' (Ni3Al) forms as a band around the TGO, in which the Al component is integrated. Although TGO can resist high temperature corrosion of the top coat, it should also be considered that if its shape is irregular and contains pore defects, it may degrade the blade high temperature creep properties. Compositional and microstructural analysis results for hightemperature corrosion and TGO defects in the blade coating layer used at high temperatures are expected to be applied to sound YSZ coating and blade design technology.
        4,000원