This study was carried out to investigate milling's effect on the pasting properties and storage stability of dry-milled rice flour. Rice flour's moisture content was increased from 9.48% to 9.80% after going through a rice polisher, and the crude fat content of rice flour was decreased from 0.91% to 0.62% after going through a rice polisher. In the color index of rice flour, the rice polisher was only affected by yellowness. The pasting properties were verified through RVA, and it was confirmed that the use of a rice polisher had no significant effect on the pasting properties. As a result of observing the changes in fatty acid value, it was ascertained that the storage period could be increased using the rice polisher. These results suggest that the rice polisher can increase the storage period without changing the pasting properties.

This study was conducted to compare the quality characteristics of firm tofu (coagulant calcium chloride, CaCl2 used) made from eight imported and four domestic soybeans selling in Korean markets. The 100-seed weight of soybeans imported from China and Seonpung cultivated in Korea was the highest at 33.23 g and 32.51 g, respectively. Soybeans imported from the USA (bulk type) showed the lowest at 16.12 g, followed by Ukraine at 16.94 g, and Brazil at 18.51 g. The range of protein and fat in the 12 soybeans was 37.08~41.36% and 18.35~22.17%, respectively. The isoflavone contents were the highest in Daepung2 cultivated in Korea at 3,764.10 μg/g and the lowest in soybeans imported from Brazil at 1,439.85 μg/g. Tofu yield among the samples was in the following order: Seonpung (235.2%), China (232.0%) Daepung2 (228.7%), Daechan (225.7%), and Brazil (208%). Tofu made with soybeans cultivated in Korea (including from China) showed a higher yield compared to that made from soybeans from seven other countries. In the analysis of the correlation of quality factors of tofu, the hardness of the tofu was correlated with 100-seed weight (r=0.676*) and protein content of the soybeans (r=0.837**). Tofu yield was correlated with 100-seed weight (r=0.748**) and protein content of the soybeans (r=0.583*).

This study analyzed the nutritional composition properties of soybeans and the antioxidants, isoflavones, organic acids, and volatile flavor compounds of fermented black soybean products (FBSP). After 24 hours of fermentation, the range of water uptake ratio was 129.00-131.30%, respectively. Total polyphenols content and DPPH and ABTS radical scavenging activity were higher in Cheongja-3 FBSP, flavonoids in Socheongja, while DPPH and ABTS radical scavenging activities were similar in Cheongja-3 FBSP. Isoflavone contents of aglycones (daidzein, genistein, and glycitein) in Cheongja-4 FBSP increased up to 41.97 μg/g. The rank order of primary organic acids was citric acid > fumaric acid > acetic acid > lactic acid, with Cheongja-3 FBSP being the highest. This study identified a total of 34 volatile aroma-compounds, including seven alcohols, seven acids, seven ketones, five phenols, two esters, one furan, four pyrazines, and one miscellaneous. The result could be applied to determine the suitability of cultivars and the quality of the process used for fermented soybean products.

This study was conducted to secure basic information for corn processing by comparing the quality characteristics according to maize cultivars and kernel types (dent, intermediate, flint-like). As a result of analyzing 15 cultivars, a range of measurements were observed: 100-kernel weight, 22.89~35.63 g; moisture, 7.57~8.42%; crude protein, 8.46~11.45%; crude lipids, 3.26~4.83%; Hunter’s L-value, 83.70~86.79; a-value, 2.61~5.49; b-value, 22.01~28.15; and total carotenoids, 6.74~17.07 μg/g. Significance among the cultivars was shown in all quality characteristics (p<0.001), but the significance among the kernel types was found only in crude protein (p<0.005), crude fat (p<0.001), and Hunter’s L-value (p<0.05). The hardness of maize was decreased proportionally to the soaking time for all maize cultivars (p<0.001). In particular, with the same soaking time for different kernel types, the hardness difference was shown in the order of flint-like > dent ≒ intermediate. It was confirmed that the decrease in the hardness of flint-like kernel of close to that of hard-type starch was slowed compare dent and intermediate kernels. So it is expected the some characteristic of kernel types will contribute to the appropriate customized use of the developed cultivars.

The purpose of this study was to compare the quality characteristics of silken tofu products from the commercial market in Korea. Seven types of commercial silken tofu were sampled and their physicochemical properties, including soluble solid contents, salinity, pH, total acidity, moisture contents (total solid contents), crude protein and fat contents were evaluated. The TPA results suggest that the texture of silken tofu was very different from one another according to the type of and the amount of coagulant. The commercial silken tofu showed a range of pH 5.53~6.48, total acidity of 0.12~0.32%, soluble solid contents of 2.62~5.07 °Brix, salinity of 2.28~4.30%, and moisture contents of 87.10~92.24%, respectively. In terms of the coagulant of tofu, besides the GDL (glucono-δ- lactone), other coagulants such as MgCl2 for making ‘silken tofu’ in the Korean tofu market. The quality characteristics differed depending on the constituents of sample and the coagulants of tofu used. These results are expected to be useful in identifying new trends in the domestic silken tofu industry.

The purpose of this study was to evaluate the quality properties of Meju prepared by inoculating two strains of Bacillus amyloliquefaciens HJ5-2, and Aspergillus oryzae PS03. The three soybean varieties that include Daewonkong, Daechan, and Saedanbaek were used in this experiment. The fermentation temperature during the Meju aging varied at 20℃, 30℃, and 40℃, respectively. The physicochemical analysis of the soybeans, showed that the cured protein and fat contents were 34.83~43.49% and 12.91~18.90%, respectively. The pH and total acidity were 6.47~6.93 and 0.11~1.22%, respectively. The change in appearance of the Meju was that the yellow-green mold was well formed on seven days at fermentation temperature of 20℃ and 30℃, but at 40℃, there was minimal mold formation and cracking of the surface. The amino nitrogen content was highest on the Daechan Meju at 621.83 mg% for seven days. The amylase increased as the fermentation period increased in all samples, and the protease increased rapidly until the first day of the fermentation, and then gradually increased thereafter. The total number of bacteria increased or decreased as the fermentation proceeded to 6.66~10.07 log CFU/g. The mold counts increased with increasing fermentation period in the range of 6.38~8.79 log CFU/g.

The purpose of this study was to derive the conditions for manufacturing rice porridge with optimum properties after reheating. The characteristics of rice porridge according to the soaking time, water addition rate, heating temperature, heating time, and cooling conditions were compared using the ‘Samkwang’ cultivar. In Step Ⅰ, as the heating temperature increased, the weight change decreased and the viscosity increased, and the temperature known as the main factor of the gelatinization also appeared to affect the viscosity increase. In Step Ⅱ, the viscosity and the texture properties was not significantly different as the soaking time was reduced, and 10 minutes was suitable because of due to the shortening effect of the total process time. In Step Ⅲ, the residual heat was lowered by cooling after the rice porridge production, so the viscosity could be greatly reduced. Also, it was confirmed that the water addition rate of 900% and the heating temperature of 15 minutes were optimal manufacturing conditions. The next study will investigate the porridge processability of rice cultivars using these results.

When producing rice products, it is very important to select suitable raw materials. Therefore, in this study, the quality characteristics of 16 rice cultivars were quantified to determine the criteria for evaluating the machinability of raw rice. The L value, which can affect the color of porridge prepared from rice, was the greatest for Hwaseonchalbyeo (84.17). The water-binding capacity, related to water interaction, was high in Hyangcheola (113.2%), and water solubility was high in Shingil (22.3%). Dodamssal (42.3%, 70.7 RVU) and Hwaseonchalbyeo (4.7%, 27.8 RVU) showed lower final viscosity compared to the cultivars in which the amylose content was medium groups (16.4~21.2%, 173.6~277.2 RVU). Specifically, cultivars with high or low amylose content had a low viscosity. The characteristics of the distribution of raw rice quality data were confirmed through 11 histograms. Furthermore, amylose content vs. water solubility, water solubility vs. peak viscosity, and peak viscosity vs. final viscosity showed high correlations (r=0.542, －0.569, and 0.836 respectively, p<0.01), and clear cultivar discrimination by the standard error of the mean (0.765~10.811). In conclusion, amylose content, water solubility, and peak viscosity were considered the most suitable characteristics for the quality evaluation of raw rice.

We investigated the physicochemical properties of brown rice by cultivar to select cultivar suitable for making brown rice porridge. The moisture content of the brown rice ranged from 8.79~11.78% with the highest varieties being ‘Geonyangmi’. The crude ash and crude lipid content ranged from 1.02~1.65% and 1.65~3.26%, while the rest were similar except for ‘Daebo’. Crude protein also had the lowest ‘Daebo’ and generally glutinous rice showed higher crude protein content than common rice. The hardness showed that ‘Seolgaeng’ and ‘Keunnun’ were the lowest, and ‘Haiami’ was the highest. In the RVA analysis, the setback was in the range －80.61~22.44 and was low in the order of ‘Wolbaek’, ‘Baekjinju'', and ‘Dongjinchal’. As a result of water binding capacity (WBC) measurement, ‘Sindongjin’, ‘Geonyang’ and ‘Samkwang’, were high in common rice, and ‘Dongjinchal’ and ‘Hwaseonchal’ were high in glutinous rice. Generally, solubility and swelling power in common rice was found to be lower than in glutinous rice. As a result, ‘Samkwang’ is considered suitable for brown rice porridge production because of high WBC, breakdown, and low setback.

The purpose of this study was to investigate antioxidant characteristics and anti-adipogenic effects of colored rice and brown rice extracts in 3T3-L1 adipocyte depending on cultivar (Josaengheugchal, Heugjinmi, Hongjinju, Geongganghongmi, Seolgaeng, Milyang 320, Sindongjin, Baegjinju). Colored rice and brown rice was extracted with 100% ethanol, followed by the analysis of polyphenol, flavonoid, anthocyanin, antioxidant, and anti-adipogenic activity. Total polyphenol and flavonoid content ranged from 6.86~314.08 mg GAE/g and 1.47~56.88 mg CE/g the highest total polyphenol and flavonoid content was observed in Heugjinmi cultivar. Anthocyanin composition was analyzed by HPLC, cyanidin-3-gluoside and peonidin-3-glucoside was found in black rice including Josaengheugchal and Heugjinmi. Also, the ABTS and DPPH radical scavenging activity of colored rice cultivars was higher than that of brown rice cultivars, the highest ABTS radical scavenging activity also was observed in Heugjinmi (128.20 mg TE/g). The anti-adipogenic effects of colored rice and brown rice extracts on differentiation of 3T3-L1 preadipocytes evaluated that extracts of Heugjinmi cultivar significantly reduced intracellular lipid accumulation. These results provide valuable information for the use of Korean colored rice cultivar as a functional food materials relative to anti-obesity.

In this study, the physicochemical traits of soybean (100-seed weight, seed coat rate, protein content, composition, and amino acid content) and the quality of tofu (texture and sensory characteristics) were evaluated in order to determine the features of six varieties (Saedanbaek, Daechan, Daepung2, Seonpung, Miso, Saegeum) in terms of textural and sensory characteristics of tofu. Regardless of cultivar, the order of amino acid composition rate was as follows: Glutamic acid > Aspartic acid > Arginine > Leucine > Lysine. Approximately 50-60% of tofu (dry weight) consisted of protein, and among the cultivars, Tofu made from Saedanbaek showed the highest amount of protein at 59%. It was followed by tofu made from Miso at 54%. The rest contained about 50% protein. According to the result of correlation, crude lipid (-0.933**), crude protein (0.961**), and total phosphorus (0.924**) were strongly correlated with tofu hardness, and such factors could be utilized as an indicator of tofu quality.

Sikhye is a traditional rice beverage, produced from steamed rice, barley or wheat malt and water. Nine varieties of barley and seven varieties of wheat cultivars were investigated and compared quality characteristics, diastatic power, and activities of α- and β-Amylase. For barley malt, the crude lipid and protein content of malt 1.74~2.42% and 10.71~14.36%, respectively. Also, the crude lipid and protein content for wheat malt 1.57~1.71% and 10.07~13.59%, respectively. The ‘Dahyang’ barley showed the highest diastatic power with 117.61 °L, while for wheat, ‘Baegjoong’ produced the highest diastatic power with 85.25 °L. The enzymatic activities, α- and β-Amylase for barley cultivar was 110.17~214.70 μnit/g and 869.73~1,638.43 μnit/g, respectively. Likewise, α- and β-Amylase for wheat cultivar was 73.19~132.23 μnit/g and 726.70~ 889.30 μnit/g, respectively. The highest sugar content of Sikhye from barley was 11.10 °Bx (‘Hyeda’), while from wheat, was 10.20 °Bx (‘Baegjoong’). Among the four free sugar components analyzed from Sikhye, maltose was the highest in all cultivars. The highest maltose content was produced in ‘Dahyang’ Sikhye at 6.91%. There was significant positivecorrelation among the diastatic power and enzymatic activities of malt and free sugar components in Sikhye.

This study was conducted to explore the quality characteristics of colored rice depending on the cultivars (Jeogjinu, Josaengheugchal, Joeunheukmi, Heukjinjubyeo, Hongjinju, Heukjinmi, Geongganghongmi) for porridge. The moisture, crude protein, lipid, ash, amylose and damaged starch contents of colored rice ranged from 10.05~11.23%, 7.72~8.69%, 2.68~3.26%, 1.62~1.88%, 6.29~20.31% and 5.06~8.26%, respectively. The highest moisture (11.23%), crude protein (8.69%), lipid (3.26%) and ash (1.88%) contents of colored rice were detected in Heukjinjubyeo, Joeunheukmi, Josaengheugchal and Heukjinmi, respectively. The lowest amylose and damaged starch contents of colored rice were detected in Josaengheugchal and Joeunheukmi, respectively. In general, the water binding capacity, water solubility and swelling power of Heukjinmi were greater than those of the other cultivars. The investigation of the pasting properties (peak, trough, break down, final and setback viscosity, peak time, pasting temperature) of colored rice indicated a low value in Josaengheugchal. The lowest hardness (13,673.25 g) of colored rice was observed in Heukjinjubyeo while the highest digestibility (5.44 glucose mg/g) of colored rice was observed in Josaengheugchal. These results indicated that Josaengheugchal are suitable cultivars for porridge.