Carbon-based magnetic nanostructures in several instances have resulted in improved physicochemical and catalytic properties when compared to multi-wall carbon nanotubes (MWCNTs) and magnetic nanoparticles. In this study, magnetic MWCNTs with a structure of NixZnxFe2O4/MWCNT as peroxidase mimics were fabricated by the one-pot hydrothermal method. The structure, composition and morphology of the nanocomposites were characterized with X-ray diffraction (XRD), Fourier transform infrared spectroscopy and transmission electron microscopy. The magnetic properties were investigated with a vibrating sample magnetometer. The peroxidase-like catalytic activity of the nanocomposites was investigated by colorimetric and electrochemical tests with 3,3´,5,5´-tetramethylbenzidine (TMB) and H2O2 as the substrates. The results show that the synthesis of the nanocomposites was successfully performed. XRD analysis confirmed the crystalline structures of the NixZnxFe2O4/ MWCNT nanohybrids and MWCNTs. The main peaks of the NixZnxFe2O4/MWCNTs crystals were presented. The Ni0.25Zn0.25Fe2O4/MWCNT and Ni0.5Zn0.5Fe2O4/MWCNT nanocatalysts showed nearly similar physicochemical properties, but the Ni0.5Zn0.5Fe2O4/MWCNT nanocatalyst was more appropriate than the Ni0.25Zn0.25Fe2O4/MWCNT nanocatalyst in terms of the magnetic properties and catalytic activity. The optimum peroxidase-like activity of the nanocatalysts was obtained at pH 3.0. The Ni0.5Zn0.5Fe2O4/MWCNT nanocatalyst exhibited a good peroxidase-like activity. These magnetic nanocatalysts can be suitable candidates for future enzyme-based applications such as the detection of glucose and H2O2.

In this study, composite PAN-based ACNFs embedded with MgO and MnO2 were prepared by the electrospinning method. The resultant pristine ACNFs, ACNF/MgO and ACNF/MnO2 were characterized in terms of their morphological changes, SSA, crystallinity and functional group with FESEM-EDX, the BET method, XRD and FTIR analysis, respectively. Results from this study showed that the SSA of the ACNF/MgO composite (1893 m2 g–1) is significantly higher than that of the pristine ACNFs and ACNF/MnO2 which is 478 and 430 m2 g–1, respectively. FTIR analysis showed peaks of 476 and 547 cm–1, indicating the presence of MgO and MnO2, respectively. The FESEM micrographs analysis showed a smooth but coarser structure in all the ACNFs. Meanwhile, the ACNF/MgO has the smallest fiber diameter (314.38±62.42 nm) compared to other ACNFs. The presence of MgO and MnO2 inside the ACNFs was also confirmed with EDX analysis as well as XRD. The adsorption capacities of each ACNF toward CH4 were tested with the volumetric adsorption method in which the ACNF/MgO exhibited the highest CH4 adsorption up to 2.39 mmol g–1. Meanwhile, all the ACNF samples followed the pseudo-second order kinetic model with a R2 up to 0.9996.

Fermented sausages prepared by inoculation with different starter cultures were analyzed for their physicochemical characteristics. Three types of fermented sausages were processed separately, without starter culture (control), with a commercial culture mix, and culture mix plus Lactobacillus plantarum (LP). On proximate analysis, two inoculated sausages showed an increase in moisture and fat contents (p<0.05). The inoculated sausages showed lower hardness and gumminess values (p<0.05) than control. The combination of starter culture with LP displayed the lowest chewiness and cohesiveness values and showed a more intensive red color (p<0.05). Two inoculated batches showed significantly lower pH values and water activity than control, in accordance with the increase in lactic acid bacteria (p<0.05). The inoculated sausages reduced the extent of lipid oxidation (p<0.05) and induced an increase in lauric acid, linoleic acid, eicosadienoic acid, and arachidonic acid, as well as they had a higher polyunsaturated fatty acid content and ratio of n-6 and n-3 fatty acids (p<0.05). The addition of LP to the starter culture in a suitable combination resulted in a positive effect on the physicochemical and microbiological attributes of fermented sausages.

Polygonum multiflorum (Polygonaceae family) is effective to cholesterol lowering effect, increased immunity effect and whitening effect. P. multiflorum root is used for medicinal herb that can be used as raw material for food. In this study, acetic acid fermentation was adding extracts of P. multiflorum root (0%, 1%, 3%, 5%) for the developing healthy beverage. In this study, we investigated the contents of free sugars, organic acids and inorganic components of P. multiflorum root. As a result of free sugars from P. multiflorum root analysis, three kind of free sugars were determined the glucose, sucrose and lactose by HPLC. Four kind of organic acids were found in lactic acid fermented P. multiflorum root. And oxalic acid, lactic acid and succinic acid were detected in organic acids. The content of lactose and lactic acid in lactic acid fermented P. multiflorum root was the highest among the free sugars and organic acids. The content of minerals were in high orders of sodium > calcium > magnesium in P. multiflorum by acetic acid fermentation. The content of inorganic components was highest in lactic acid fermented solution with 5% and proportional to the content of P. multiflorum

Polygonum multiflorum (Polygonaceae family) is effective to cholesterol lowering effect, increased immunity effect and whitening effect. P. multiflorum root is used for medicinal herb that can be used as raw material for food. In this study, acetic acid fermentation was adding extracts of P. multiflorum root(0%, 1%, 3%, 5%) for the developing healthy beverage. In this study, we investigated the contents of free sugars, organic acids and inorganic components of P. multiflorum root. As a result of free sugars from P. multiflorum root analysis, three kind of free sugars were determined the glucose, sucrose and lactose by HPLC. Four kind of organic acids were found in lactic acid fermented P. multiflorum root. And oxalic acid, lactic acid and succinic acid were detected in organic acids. The content of lactose and lactic acid in lactic acid fermented P. multiflorum root was the highest among the free sugars and organic acids. The content of minerals were in high orders of sodium> calcium> magnesium in P. multiflorum by acetic acid fermentation. The content of inorganic components was highest in lactic acid fermented solution with 5% and proportional to the content of P. multiflorum

The objective of this study was to increase the efficiency of starch extraction from potato sludge by different concentration of food-grade hemicellulase. The potato sludge, which is a by-product of potato processing industry, was treated with food-grade hemicellulase. Starch extraction efficiency displayed no significant difference in hemicellulase concentration. The purities of potato starch increased from 83.40 to 95.91, 97.44, 95.58, and 97.79%, with treated 0.5, 0.75, 1.0, and 1.5% hemicellulase, respectively. The physicochemical properties of the starches, such as granule structure, particle size, pasting, and thermal transition, were not affected by the concentration of hemicellulase. These results indicate that food-grade hemicellulase treatment is an efficient method for starch extraction from potato sludge.

Most of the red ginseng (RG) products contain active substances derived from hot water or alcohol extraction. Since active substances of RG are divided into two two types: water-soluble and liposoluble, water or alcohol is needed as an extraction solvent and this leads the different extraction yields and components of the active substances. To overcome the limit, whole red ginseng powder can be used and consumed by consumers. In this study, the physicochemical properties and extractable active substance contents of variable-sized RG powder (158.00 μm, 8.45 μm, and 6.33 μm) were analyzed, and dispersion stability was measured to investigate the suitable size of RG powder for industrial processing. In the results, no significant difference was found from the changes in color intensity and thiobarbutric acid tests at 4°C, 25°C, and 40°C for 4 weeks. There was no significant difference on the production of antioxidants and ginsenoside among the samples (p>0.05). In dispersion stability, RG-158.00 μm was precipitated immediately, and the dispersion stabilities between RG-8.45 μm and RG-6.33 μm showed no significant difference. It implies that fine RG is suitable for the production process. With further study, it seemed that the physicochemical effects of RG particle sizes can be clearly revealed.

본 연구는 키토산 및 생균제를 급여한 한우의 채끝등심의 품질 및 화학적 특성에 미치는 영향에 대해 조사하기 위해 실시 하였다. 거세한우(n=20)를 시험구별 완전 임의 배치한 뒤 대조구(n=10)는 일반 배합 사료를 급여하고, 처리구(n=10)는 키토산 및 생균제 배합사료(생균제 1%, 키토산 0.1%)를 4개월 동안 급 여하였다. 각 처리구는 1등급을 받은 채끝등심을 이용하였다. 일반성분 결과 수분(64.13~65.00%), 조회 분(1.47~1.69%), 조단백질(19.56~20.25%), 조지방(15.69~15.88%)은 처리구간 유의적인 차이가 없었다. pH, 가열감량, 전단력, 육색 모두 처리구간의 유의적인 차이는 없었으며, 보수력의 경우 대조구(69.60%) 보다 처리구(74.29%)가 유의적으로 높았다(p<0.05). 지방산패도는 처리구간의 유의적인 차이는 없었으 나 휘발성염기태질소 함량은 처리구에서 유의적으로 낮은 함량을 나타내었다(p<0.05). Collagen함량과 anserine 함량은 처리구간의 유의적인 차이는 없었으나, carnosine은 처리구(51.22mg/dry base)가 대 조구(47.08mg/dry base) 보다 유의적으로 높은 함량을 나타내었다(p<0.05). Palmitoleic acid와 다가 불포화지방산 함량은 대조구보다 처리구에서 유의적으로 높았으며, 키토산과 생균제 급여는 한우 채끝 등심의 아미노산과 무기질 함량에는 영향을 미치지 않았다. 따라서 거세 한우에 1% 생균제 및 0.1% 키 토산 배합사료 급여는 한우 채끝등심의 보수력 향상 및 단백질 변패 억제, 기능성 성분인 carnosine 함 량과 다가 불포화 지방산의 함량을 높이는 효과를 보여 추후 이들 성분이 기능성 사료 첨가제로서 사용 가능성이 있을 것으로 사료된다.

The objective of this study was to determine the effect of moisture contents (40, 50, 60%) and CO2 gas injection (0 and 800 mL/min) on physicochemical properties of extruded soy protein isolate (SPI). The expansion ratio and the specific length increased, but piece density decreased with the increase in CO2 gas injection from 0 to 800 mL/ min at both 40 and 50% moisture contents. On the contrary, the expansion ratio and the specific length decreased, but piece density increased with the increase in CO2 gas injection from 0 to 800 mL/min at 60% moisture content. Extruded SPI with CO2 gas injection at 800 mL/min had small cell size and higher amount of cell than extruded SPI without CO2 gas injection. The water holding capacity and nitrogen solubility index increased, and the integrity index and the texture decreased with the increase in CO2 gas injection from 0 to 800 mL/min. In conclusion, extruded SPI with the CO2 gas injection at 800 mL/min showed better expansion properties and cell formation than extruded SPI without the CO2 gas injection.

The objective of this study was to determine the effect of moisture contents (40, 50, 60%) and CO2 gas injection (0 and 800 mL/min) on physicochemical properties of extruded soy protein isolate (SPI). The expansion ratio and the specific length increased, but piece density decreased with the increase in CO2 gas injection from 0 to 800 mL/ min at both 40 and 50% moisture contents. On the contrary, the expansion ratio and the specific length decreased, but piece density increased with the increase in CO2 gas injection from 0 to 800 mL/min at 60% moisture content. Extruded SPI with CO2 gas injection at 800 mL/min had small cell size and higher amount of cell than extruded SPI without CO2 gas injection. The water holding capacity and nitrogen solubility index increased, and the integrity index and the texture decreased with the increase in CO2 gas injection from 0 to 800 mL/min. In conclusion, extruded SPI with the CO2 gas injection at 800 mL/min showed better expansion properties and cell formation than extruded SPI without the CO2 gas injection.

The effects of high hydrostatic pressure (HHP) or concentration treatment or sodium hydrogen carbonate addition on microbial and quality properties of cold drip liquid coffee were investigated during storage at room temperature. Cold drip liquid coffee was determined to pH, acidity, general bacteria, and Y&M (Yeast and Molds) according to HHP treatment or adding 0.2% sodium hydrogen carbonate for 40 days storage at 20°C. Also, an equivalent mixture of concentrated coffee and cold drip liquid coffee or liquid coffee with 0.2% sodium hydrogen carbonate was used for determining the sensory evaluation, due-trio and preference test. The cold drip liquid coffee with 0.2% sodium hydrogen carbonate had higher pH and lower titratable acidity than the control during 40 days storage at 20°C. Total viable cell and Y&M counts of cold drip liquid coffee added with 0.2% sodium hydrogen carbonate or treated by HHP at 300 MPa for 25 min were lower than the control during storage at 20°C. The result of the due-trio and preference tests shows that there was no significant difference between cold drip liquid coffee added to 0.2% sodium hydrogen carbonate and the control or between the equivalent mixture of concentrated coffee with cold drip liquid coffee and the control. As a results, Cold drip liquid coffee treated by HHP, concentrated by evaporation, and added to sodium hydrogen carbonate has a potential to extend a shelf life at ambient temperature storage.

The physicochemical and sensorial properties of fibrous tofu with the addition of different sized defatted soybean flour (DSF) were investigated. Coarse DSF (DSF-150; D50 = 279 μm), fine DSF (DSF-63; D50 = 105 μm), and super-fine DSF (DSF-JM; D50 = 5.0 μm) were prepared via conventional sifting followed by jet-milling with the milling pressure of 7 bars. Tofu was made with the 5% addition of coarse DSF (TDSF-63), fine DSF (TDSF-150), superfine DSF (TDSF-JM), and without DSF (TC). The yields of tofu were slightly decreased as coarse and fine DSF were incorporated while the yield of tofu with super-fine DSF was statistically identical with that of control tofu (p<0.05). Tofu with larger DSF (TDSF-63 and TDSF-150) showed less smoother texture and less pure in color, while tofu with superfine DSF (TDSF-JM) resulted in little changes in physical and organoleptic qualities, which were verified by quantitative descriptive analysis (QDA), texture profile analysis (TPA), and color measurements. Each fibrous tofu samples were prepared by mixing soymilk with 5% of DSF from sifting (150 μm, 63 μm sieve) and jet milling process which mentioned as TDSF-150 (DSF average particle size), TDSF-63 (D50 = 105 μm) and TDSF-JM (D50 = 5 μm), respectively. The fibrous tofus were compared to the normal tofu (TC). TDSF-JM has higher yielded (50.98%) among tofu samples. The moisture content of TC, TDSF-JM, TDSF-150 and TDF-63 were 75.81%, 75.47%, 69.89% and 69.80%, respectively. TDSF-JM and TC were having similar L-a-b index. Texture properties of TDSF-JM were similar with TC. On the other hand, TDSF-150 and TDSF-63 has statistically significant higher hardness value and lower point on springiness and cohesiveness compared with TC. Sensory evaluation with quantitative descriptive analysis (QDA) method shown that hardness, mouth feel and beany flavor intensity were decreased with the decreasing of particle size of DSF.

The physicochemical properties of dry wine produced from domestic kiwifruit according to production year from 2008 to 2012 were studied. pHs of wine were from 4.02(F wine, production year 2009, sterilized) to 4.11(D wine, production year 2012, non-sterilized) and their acidities were lowest in D wine(0.79%) and highest in F wine(1.18%). All the wines have the same soluble solids of 8 °brix and 12% of alcohol, respectively. The reducing sugar was lowest in A wine(production year 2008, non-sterilized) and highest in D wine. The lactic acid was detected as a main organic acid and the free sugar was detected only fructose. As main flavor components, ethyl acetate and 1-pentanol were detected and their sum of 80~90% and a small amount of phenylethyl alcohol which providing rose-like aroma was also detected. The contents of soluble phenolics were highest in D wine(1.07 g/L) and lowest in C wine(0.80 g/L), corresponding to the antioxidant activity was highest found in D wine according to their soluble phenolic contents.

Physicochemical properties of water quality were analyzed to understand the long-term variations in Lake Youngrang from 1998 to 2015. Nonparametric statistical methods were applied to deduct correlation among water quality parameters and water quality trend. In total observations (N=64), the Secchi depth (SD) transparency showed significant positive correlation with salinity (r=0.458) and highly significant negative correlation with chlorophyll-a (r= - 0.649) for p<0.0001 in two-tailed test of Spearman’s rank correlation. Significant negative correlations of SD were observed with chemical oxygen demand (COD), total phosphorus (TP) and total nitrogen (TN). These correlation patterns were very similar in rainy (N=25) and non-rainy (N= 39) periods too. Chlorophyll-a (Chl-a) had significant correlation with COD. Sen’s slope test was performed along with Mann-Kendall trend test (significance α=0.05, two-tailed) to find water quality trend. Positive trends were observed for SD and salinity with Sen’s slopes 0.012 and 0.385, respectively (p<0.0001). Negative significant trends were observed for total nitrogen (TN) and Chl-a with Sen’s slopes - 0.02 (p<0.0001) and - 0.346 (p=0.0010), respectively. Temperature, COD and phosphorus components had no trends. Carlson’s trophic state index (TSI) for SD, TP and Chl-a were obtained in the ranges of 46~80, 37~82 and 39~82, respectively. Trophic index values suggest that Lake Youngrang was mesoeutrophic to eutrophic and there could be possibility of anoxia during the summer and dominance of blue-green algae. Excess nutrient inputs from external and internal sources were the causes of eutrophication in this lake. The findings of this study would be helpful to recognize water quality variables to manage the water body.

We investigated the changes in the physicochemical properties of wheat grains during ripening stage to determine the effect of the rise in average temperature on that of wheat grains. The treated average temperatures were 18.3°C(control), 19.9°C(1.6°C increase), 21.5°C(3.2°C increase) in artificial climate room from heading time to harvest. Results showed that the ripening period from heading to maturity tended to be shorter during higher temperature treatment condition. The 1,000-grain weight, grain width, number of florets per spike, and number of grains per spike decreased as the ripening period was shortened. Gelatinization properties were affected by high temperature due to the reduction of starch and amylose contents. As the grain filling period was shortened by high temperature treatments, the crude protein content increased. As the grain filling period was shortened by 6 days, the starch and amylose contents decreased by 10.8% and 5.4%, respectively. However, the crude protein content increased by 1.7% in such a condition. Starch content showed positive correlations between amylose and breakdown. Meanwhile, it showed negative correlations between electric conductivity of leaching water from seeds, crude protein content, peak viscosity, trough viscosity, final viscosity, and setback.

Ginger was steamed at 121 o C and 1.5 lb/in 2 for 30 min, dried at 60 o C for 12 h, and each step was repeated nine times. During processing, the lightness (L* value) and yellowness (b* value) decreased from 85.65±0.33 and 26.99±0.20 in the non-treated ginger to 56.91±0.25 and 16.69±0.06 in ginger treated for the ninth treatment. On the other hand, redness (a* value) increased from -1.51±0.03 to 7.34±0.08 on the eight treatment and then decreased to 7.21±0.04 on the ninth theatment. The contents of 6-gingerol decreased from 3.257±0.067 mg/g in the non-treated ginger to 0.567±0.036 mg/g on the theatment, whereas the contents of 6-shogaol increased from 1.299±0.050 mg/g to 2.999±0.089 mg/g on the sixth treatment and decreased to 2.099±0.039 on the ninth treatment. The contents of 10-gingerol decreased slightly from 1.106±0.125 mg/g to 0.806±0.026 mg/g. Unlike the 6- and 10-gingerol, the contents of 8-gingerol did not change greatly, with values between 0.916±0.005 mg/g and 1.106±0.005 mg/g being observed during processing. The tyrosinase inhibitory activities were increased from 43.42±11.45% in the non-treated ginger to 100% on the sixth treatment and then decreased to 51.98±7.36% on the theatment. The antioxidative activity was retained during processing.