1.5 μm-thick copper films deposited on silicon wafers were successfully bonded at 415˚C/25 kN for 40 minutes in a thermo-compression bonding method that did not involve a pre-cleaning or pre-annealing process. The original copper bonding interface disappeared and showed a homogeneous microstructure with few voids at the original bonding interface. Quantitative interfacial adhesion energies were greater than 10.4 J/m2 as measured via a four-point bending test. Post-bonding annealing at a temperature that was less than 300˚C had only a slight effect on the bonding energy, whereas an oxygen environment significantly deteriorated the bonding energy over 400˚C. This was most likely due to the fast growth of brittle interfacial oxides. Therefore, the annealing environment and temperature conditions greatly affect the interfacial bonding energy and reliability in Cu-Cu bonded wafer stacks.

The insecticidal potency of some essential oils have been suggested that they may find an application in the control of house dust mites. We compared the repellent effect of four essential oils ; lemon grass (Cymbopogon nardus), lavender(Lavandula vera), rosemary(Rosmarinus officinalis) and ylang ylang(Cananga odorata). The oils were exposed at different doses(0.1, 0.05, 0.025, 0.0125, and 0.00652 ㎕/㎠) and different times(1, 2, 3, 4, 5 hours) on house dust mites(Dermatophagoides farinae and D. pteronyssinus). The repellent effects(%) of essential oils that were exposed at 0.1 ㎕/㎠ and for 1 hours against house dust mites were lemon grass(63.3%) and rosemary(61%), lavender(40%), ylang ylang(40%) in the order named.

많은 계산량이 요구되는 삼차원 접촉 문제의 효율적인 유한요소 해석을 위하여 영역/경계 분할 기법을 적용하였다. 접촉 경계면의 부등식 적합 조건과 부영역, 공유면, 접촉 공유면의 등식 적합 조건을 모두 벌칙 함수로 처리하였다. 이에 따라 모든 유효 강성 행렬이 양 정치화되므로, 역행렬과 같은 각종 행렬 연산이 매우 간편해진다. 또한 전체 영역의 형상이 복잡하더라도, 임의의 부영역, 공유면, 접촉 공유면 단위로 쉽게 유한요소 모델링할 수 있다. 즉, 관련 지배 방정식은 물론 경계 조건도 독립적으로 이산화할 수 있으므로, 국부적인 비선형 접촉 조건에 대한 효율적인 해석이 가능하다. 간단한 수치 예제를 통하여 삼차원 접촉 해석의 효율성에 관한 기본적인 경향을 검토하였다.

The purpose of this study was to examine the effects of vi tamin D3 and 1'etinoic acid(RA) on the human mesenchymal stem ce!ls(MSC) g1'owth and osteogenic differentiations. Cell proliferation, mineralization, cell cycle, expression of cell cycle regu l atOJγ proteins and markers fo1' osteogenic differenatiaiton were determined by MTI assay, mineralization assay, flow cytomet1'Y‘ and Western blot analysis, respectively. Cell viability was dec1'ease by each vitamin D3 and RA added to MSC. it was more decrease by vitamin D3 and RA. Mineralized nodule formation revealed similar expression pattern with positive cont rol group at vitamin D3 and RA mixed add to MSC. At vitamin D3 and RA mixed add to MSC after 7 days of incubation was increase G1 s tage. after 21 days of incubation was inhibit cell cycle prog1'ess by inc1'ease of sub-G1 Treatment vitamin D3 to MSC inhibits p53 and p21, but inc1'ease pRb. RA inhibit p53, but increase p21 and pRb, vitamin D3 plus RA group was same as added RA group. so two vitamin was effect to inhibited cell growth each different mechanism. Expression of BMP-2 protein was prominent in osteogonic supplement treated g1'oup of MSC at 2 weeks cultivation days, but vi tamin D3 treatment decreased BMP-2 expression rather than in (+) control group. BSP protein was notably increased in the OS compa red to positive controls at 2 weeks cultivation, but similar to that of vitamin D3 group t1'eatment group and was least expressed in plus RA mixed group, at 3 weeks, BSP expression was similar to 1'esult of 2 weeks Collectively, these results shows that vitamin D3 and RA have diffe1'ential effects on the MSCs g1'owth and differ entia tion 211

나노 규모의 1차원 양자 구조물을 이용한 전자선 차폐 가능성에 관한 이론적 배경과 한계를 정리한다. 나노 구조물을 이용한 전자선 차폐는 차폐재의 경량화와 소형화에 크게 기여할 것으로 예상되나, 실용화를 위해서는 아직 연구되어야 할 분야가 많다. 임의의 1차원 포텐셜 장벽을 대상으로 양자투과계수 계산을 실행하여, 나노 구조물의 전자선 차폐와 관련된 문제점들을 살펴본다.

The display technology on the retina is the key role in inspecting the condition of the patients. Especially, silt lamp biomicroscope is one of the important tools to inspect the patient's retina, because the slit lamp biomicroscope, the workhorse for ophthalmic diagnosis and treatment, is far more ubiquitous, and is now often equipped with video attachments to permit image capture for documentation, storage, and transmission. In many cases, image quality may be, in part, attributable to a narrow field of view and specular reflections arising from the cornea and sclera. In this paper, we have real time extraction of the feature of retina image portion and then edges of blood vessel in retina images are detected. Based on the edges of the retina images, every image is assembled for more wide image. The developed algorithms allowed for highly accurate alignment and blending of partially overlapping slit lamp biomicroscopic fundus images to generate a seamless, high quality and wide field image. Therefore we verified the possibility that video image were acquisition and processing algorithms for mosaicking and enhancement of slit lamp biomicroscopic fundus images. The improved quality and wide field of view may confer for inexpensive, real time photo-documentation of retina abnormalities.

Ödön Lechner has been known as an architect who incorporates Hungarian folk motifs in creating a highly original Hungarian national style. Nevertheless, his work has been surprisingly neither exposed nor familiar to Korean audiences. This article attempts to reveal the unique characteristics of Lechner’s architectural thought and ideas along with his buildings in Budapest. First of all, this article presents the evolution of Lechner’s architectural thought by dividing his career into four marking periods. They are in chronological order to serve as a record of his architectural career. The authors then discuss his concern on the Hungarian ethnography in architecture while turing away from orthodox classicism. Subsequently, this article analyzes Lechner’s three major buildings located at Budapest. By doing so, it attempts to expose his underlying design ideas and to shed light on the most elegant works of the architect. Finally, it marks out Lechner's influences on young Hungarian architects.

이 연구의 목적은 두 가지로 대별할 수 있다. 첫째는, 베리오그램 모델링에 기초를 둔 정규크리깅 보간법의 p-적응적 유한요소법으로의 적용성이다. 둘째는, 수정된 초수렴 팻취복구 기법을 사용한 사후오차평가기와 연계된 계층적 p-체눈 세분화의 적응적 유한요소 과정을 제시하는 것이다. 가중치를 부여한 보간기법중의 하나인 정규크리깅 방법은 가우스 적분점에서의 응력데이타로 부터 소위 준정해를 얻는데 적용된다. 가중치를 동일하게 가정하는 종래의 보간기법과는 달리 실험적 및 이론적 베리오그램을 작성한 후 보간을 위한 가중치를 결정하게 된다. 한편, 적응적 p-체눈 세분화는 해석영역의 각 체눈에서 p-차수를 만족할만한 정확도를 얻을 수 있도록 프로그램내에서 자동으로 사후오차평가를 통해 불균등 또는 선택적으로 증가시킨다. 수정된 초수렴 팻취복구기법을 검증하기 위해 극한치를 사용한 새로운 오차평가기가 제안된다. 제안된 알고리즘의 정당성은 선형탄성파괴역학의 대표적 문제들인 중앙균열판, 일변균열 및 양변균열 해석을 통해 테스트되었다.

The 21st Century Frontier Program, which is one of the R&D programs funded by Korean government, was launched in 1999 to elevate the status of Korean science and engineering capabilities to the advanced nation in the strategic fields. Currently, 23 different fields of science and engineering programs are carried out by researchers in institutes, universities and industries. Center for Advanced Materials Processing (CAMP) was formulated in 2001 to develop the advanced materials as well as to improve the parts manufacturing process. The main role of CAMP is proposing and forecasting the long term vision in Materials Processing Technology and also supporting the project teams for their best performance in R&D. The CAMP program consists of 5 research areas such as, Multi-layer Ceramic Electronic Parts, Powder Formed Precision Parts, 3 Dimensional Polymer Based Composites, Functional Metal Sheets, Parts Integration Technology. An introduction of R & D activities at CAMP, specially focusing on powder metallurgy, will be presented.

A survey was conducted to find out the major plant parasitic nematode in Chrysanthemum morifolium fields in Korea from May to June in 2005. A genus of Pratylenchus was determined as the most important plant parasitic nematode based on analysis of total 50 samples from 8 cities of chrysanthemum field. Pratylenchus showed 86% occurrence rate and average numbered 1,095 per 200㏄ soils and Ig root. Five Pratylenchus isolates, "Muan", "Masan", "Tean", "Gumi", "Jeongup", were selected for the molecular identification of the species of Pratylenchus, and ITS and D3-28S ribosomal DNA were amplified by PCR. For the ITS, only" Muan" isolate was differentiated by total 1 kb PCR amplification, which was 200 bp larger than all the other isolates. There was no size variation in amplified D3-28S rDNA and all isolate represented approximately 320 bp of PCR product. Sequence data of D3-28S rDNA were analysed by MegAlign program in DNASTAR software and phylogenetic tree was constructed. Sequence homology was 100% between "Gumi" isolate and "Tean" isolate and "Jeongup" isolate was also close to these isolates by 99.7% sequence homology. "Gumi", "Tean" group and "Jeongup" isolate were determined to be closely related to Pratylenchus vulnus by 96.7% and 96.3% similarity in respectively. D3 sequence of "Masan" isolate was 100% identical to P. penetrans, and "Muari" isolate showed 99.7% similarity to P. brachyurus. This result was congruent with the branch divergence pattern shown in phylogenetic tree.