The aim of this study was to compare the appearance rate of vaginal cytology during estrous cycle in small pet bitches. A characteristic features of vaginal cytology during the estrous cycle were the high proportion of superficial cell in proestrus, anuclear cell in estrus, small intermediate cell in diestrus, and small intermediate cell in anestrus, respectively. There were no statistically significant differences of appearance rate of vaginal cytology among small pet bitches in the each phase of estrous cycle. These results indicated that the vaginal cytology was useful method for estimating estrous cycle and optimal breeding time in small pet bitches.

본 연구는 세계적으로 점점 애완 식품 시장이 발달하고 있음에 따라 천연물을 소재로 하여 치석, 치태를 감소시킬 수 있는 기능성 수제 간식을 개발하고 그것을 통하여 구강의 건강을 개선하고자 진행하였다. 연구에 사용된 개들은 주변 학우들에게 연구에 대하여 설명을 해주고 동의한 학우들의 개들에 통하여 진행하였다. 간식 급여 기간은 2016년 5월 11일 ~ 25일까지 2주간 급여를 진행하였고, 체중을 기준으로 급여하였다. 지표를 이용하여 치석, 치태의 축적도를 관능검사로 평가하였다. 상이한 대상을 통한 연구로 인하여 정확하지 못한 실험 결과를 초래 하였다. 이를 확인하기 위한 적절한 동물들의 사용과 재료에 대한 연구와 실험방법, 실험기간을 제대로 확립한다면 치석, 치태 감소에 좋은 새로운 소재라 생각한다.

우리나라에서 동물등록제 의무화가 실시된 이래 유기동물 발생에 대한 감소가 뚜렷하게 나타나고 있지 않으며 동물등록제에 대한 정보가 충분하지 않고 동물등록제에 대한 부정적인 인식을 가지고 있다는 문제점을 인지되어 현황 및 인식조사를 실시하게 되었다. 설문조사는 온라인으로 진행되었으며 약 400여 명의 성인남녀를 대상으로 하여 설문조사의 정확성을 높였다. 또한 동물등록제의 현황을 조사하기 위해 관련 단체 ‘한국동물구조협회’와 인터뷰를 하였으며 외국과 비교하여 우리나라의 문제점을 개선하기 위한 방안을 모색하고 동물 등록제를 장려하기 위해 홍보 캠페인을 진행하였다. 연구결과, 반려동물등록제에 대해 과반수이상이 알고 있다고 응답하였지만, 등록제 시행은 절반도 이루어지지 않았다. 그 이유는 반려동물등록제에 대해 알지 못할뿐더러 내장형 식별장치(마이크로 칩)에 대한 부정적인 인식이 큰 부분을 차지하는 것으로 드러났다. 따라서 반려동물등록제에 대한 보다 적극적인 홍보와 인식개선이 필요한 것으로 생각된다.

본 연구의 목적은 임상의 핵의학, PET 진단 분야에서 진단 시에 사용되는 방사성 동위원소 중 18F를 이용하여 납가운의 두께 별 에너지스펙트럼을 측정하고 납가운 0.3, 0.5mmPb에 대한 차폐율을 측정하고자 하였다. 에너지 스펙트럼 측정의 경우 자체 제작한 방법으로 측정하였고 차폐율 및 선량 측정의 경우 납가운과 선원의 거리에 대 해 선원과 측정기에 대해 납 가운의 위치를 달리 하여 3가지 조건으로 나누어 각각 20회씩 측정을 하여 평균값을 산출하였다. 에너지 스펙트럼 상에서는 납가운을 위치하 였을 때 본래 방사성 동위원소로부터 방출되는 에너지 외의 에너지 피크영역이 측정 되었고 차폐율 및 선량측정에서는 방사성동위원소 18F은 납가운을 이용하여 차폐를 할 경우 차폐율이 매우 미비하거나 음수의 값이 측정되었다.

Beam hardening artifact can be caused by metal material when performing PET exam. Therefore, we studied a solution decreasing artifact caused by metallic dental implant. The higher voltage, the lesser artifact in CT exam. But Higher voltage dosen't affect PET exam. The thicker silicon the lesser artifact in CT and PET exam. Both methods make less artifact in CT and PET exam. But considering safety of patient, the way of using silicon is better.

This study is to investigate the effect of the pet insect therapy. The pet insect program was provided with 7session from May 2014 to July 2014. The measures used in this study includes self-esteem scale, social competence scale and stress scale. For analyses, t-tests with pre-test and post-test scores of experimental group and control group by SPSS 18.0. Regarding the results insect group who participated in the pet insect program showed higher mean scores in Self-Esteem scale, Social Competence Scale and stress Scale than those of control group. Mean score differences were statistically significant in at least p<0.01 level. The study results means that the pet insect program had effects on the improvement of Self-Esteem, Social Competence and reduce stress for elementary school children.

A many researcher suggest that children exhibit a natural interest towards insects, and different intervention programs have shown the presence of an insect being able to increase children’s attentiveness and motivation levels. Nonetheless, few research effort have been devoted to the identification of specific insect characteristics able to attract and engage children. This study was aimed at assessing children’s preference for insect species. Children aged 12 years participated in the study and were tested on a choice task, using pet insect program. Children’s preferences for different species and for effects of sex analyzed. Overall, girls showed a preference for more lepidoptera species like cabbage butterfly and swallowtail butterfly. On the other hand, boys showed a preference for coleoptera insect. Results and their implications for the child-insect bond are discussed.

Beam hardening artifact can be caused by metal material when performing PET exam. Therefore, we studied a solution decreasing artifact caused by metallic dental implant. The higher voltage, the lesser artifact in CT exam. But Higher voltage dosen't affect PET exam. The thicker silicon the lesser artifact in CT&PET exam. Both methods make less artifact in CT&PET exam. But considering safety of patient, the way of using Silicon is better.

‘Well-being’ is an important trend and issue that requires consumers to be satisfied with various functional fabrics; subsequently, functional fabrics that are highly sensible, functional, and environmentally friendly have a competitive edge (O’Mahony & Braddock, 2002; Hui, Lau & Ng, 2004). Recent interest in environmental protection due to global warming has led to various energy reduction campaigns. Fabric research has focused on developing cool summer fabrics and warm winter fabrics. The selection of a correct textile material is important to form a pleasant clothing climate. New fabric development requires new measurement methods. Warm/cool touch is a major factor that influences thermal clothing comfort. Current measurements of warm/cool touch is mainly assessed by Q-max using Thermo-LaboⅡ. The potential of using an infrared thermography camera (widely used because of its relatively cheap price) on warm/cool touch research has increased because it can visually show changes in clothing surface temperature. Skin temperature is a factor that influences heat exchange between the body and environment. It also indicates the effectiveness of the heat transfer process. It is an important standard to evaluate thermal comfort in thermal physiology. The techniques to measure skin temperature have been investigated to find more accurate data (Min, Chung, Sung, Jeon, & Kim, 2001). A thermometer is generally used to measure body temperature; however, there are some difficulties to accurately measure skin temperature using a thermometer. First, skin temperature was determined by only a few points on the body. Second, heat occurs during exercising due to fabric and thermometer friction that creates difficulties for the accurate measurement of skin temperature. A previous study by Choi & Lee (2008) indicated that it would be possible to evaluate the thermal properties of clothing using infrared thermal images. This study used a garment with different triacetate and PET high absorbance quick dry filament blending ratios and chose three healthy female subjects in their twenties to evaluate wear comfort sensations. They walked at 3.3 km/h for 20 minutes under conditions of 29±2℃ and 75±5% R.H. Subjective assessments of wear coolness, microclimate, and the thermogram image under the clothing were measured before and after exercising. We compared the results of the microclimate and subjective assessments with the results of the thermogram analyses. Clothing, high blended with triacetate, had a small average temperature difference as indicated by infrared thermal image. This result corresponded to subjective thermal sensation, microclimate humidity, and subjective wear comfort.

Photovoltaic (PV) modules are environmentally energy conversion devices to generate electricity via photovoltaic effect of semiconductor from solar energy. One of key elements in PV modules is “backsheet,” a multilayered barrier film. A desirable backsheet should exhibit barrier properties. A representative backsheet materials is composed of polyvinyl fluoride (PVF) and poly(ethylene terephthalate) (PET). In this study, we utilize PET films with high crystallinity, instead of PVF. Since it is well known that PET is suffering from hydrolysis, it is needed to understand PET decomposition behavior. To evaluate their hydrolysis behavior, accelerated PET decomposition test protocols are used. Electro chemical PV module performances are investigated to prove the efficacy of hydrolyticall durable PET films selected via the screening process.

When scanning PET/CT, dose not unwrinkle gastric folds can be difficult to diagnose gastric cancer. In this study, we use an blowing agent to evaluate the extension the stomach and usefulness of it. The study enrolled 30 patients who patient with uptake in stomach between January and February 2013. Stomach extension was described as the vertical length of the Water drink group was 61.7±9.7 mm, horizontal length was 102.5±17.6 mm and the vertical length of the Blowing agent group was 74.1±10.7 mm, horizontal length was 101.5±14.8 mm in transverse section. Stomach extension was described as the vertical length of the Water drink group was 109.3±18.8 mm, horizontal length was 62.7±18.4 mm and the vertical length of the Blowing agent group was 123.1±23.1 mm, horizontal length was 87.6±14.9 mm in coronal section. Water drink group SUV decreased 35% and Blowing agent group SUV decreased 56%. Blowing agent group extension was similar or superior than water drink group. Therefore, when using a blowing agent will be able to help clinical.

고분자 필름의 표면에 친수성의 증가시키는 것은 그 자기 세정 및/또는 방담 특성을 가지게 하는데 중요한 접근 방법이다. 일반적으로 친수성 표면은 비이온 계면활성제를 코팅하거나 표면에너지를 증가시킴으로써 제조할 수 있다. 본 연구에서는 가격이 저렴하고 톨루엔 용제에 잘 용해될 뿐 만아니라 커플링제와 반응할 수 잇는 하이드록시기를 가지고 있는 Tween, Span 및 PEG-PPG 블록공중합체를 선택하여 실험을 수행하였다. 배합 조건에 따라 PET 필름 표면의 친수도에 큰 영향을 미침을 확인하였다. 그러나, PET 필름의 표면상에 단순히 이들 계면활성제의 도입은 수세 후에는 높은 내구성을 보여주지 않았다. 내구성을 높이기 위해 에폭시 및 이소시아네이트와 같은 두 종류의 커플링제를 사용하였다. 코팅액에 6 중량 %isophrone 디이소시아네이트 (IPDI)를 함유한 코팅액으로 코팅된 PET 필름 표면의 물에 대한 접촉각은 8.7˚까지 낮아졌으며, 이는 매우 높은 친수성에 대한 간접적인 증거이다. 또한, 코팅된 PET 필름의 광 (파장 500 nm) 투과율 값은 높은 투명 특성을 유지하면서 87%에서 85%로 약간 감소하였다. 이 PET 필름은 자기 세정 특성이 필요한 필름산업에 적합한 소제로 사용될 수 있다.

When scanning PET/CT, dose not unwrinkle gastric folds can be difficult to diagnose gastric cancer. In this study, we use an blowing agent to evaluate the extension the stomach and usefulness of it. The record of 30 patients with local or total uptake of stomach between January and February 2013. Stomach extension was described as the vertical length of the Water drink group was 61.7±9.7 mm, horizontal length was 102.5±17.6 mm, the vertical length of the Blowing agent group was 74.1±10.7 mm, horizontal length was 101.5±14.8 mm in transverse section. Stomach extension was described as the vertical length of the Water drink group was 109.3±18.8 mm, horizontal length was 62.7±18.4 mm, the vertical length of the Blowing agent group was 123.1±23.1 mm, horizontal length was 87.6±14.9 mm in coronal section. SUV results in decrease 35% for water drink group, decrease 56% for blowing agent. When the use blowing agent group extension of stomach was similar or superior than water drink group. Therefore, when using a blowing agent will be able to help clinical.

Recently, 18F-FDG PET based CT scan was a critical examination that the after, before plan diagnosis and treatment of tumors. But, due to the distortion of SUV that should be proportional to the metabolic rate of glucose in the tumor, the other measurement methods are being on study. In this study, compared the degree of distortion of SUV that according to the volume of the tumor analysis ROI and VOI using the NEMA IEC Phantom. The results, the SUVmax, mean value are rapidly decreased with threshold value 500 mm2 interval of the ROI analysis, 1500 mm3 interval of the VOI analysis. When compared SUVmax value SUVmean, ROI and VOI analysis VOI measurements was 1.077 times higher SUVmax was 0.981 times highe compared to the value of the ROI measurement. Compare MTV, SUV 2.0 as measured by the volume of the VOI to Volume showed a slightly higher results(Volume / MTV = 93.4 % ±14.8 %). Considering the above results, Tumor evaluation by 18F-FDG PET / CT scan Consider each threshold value should be analyzed due to larger SUV's Distortion depending on the size of the tumor. VOI analysis is recommended. because it showed the VOI analysis is higher than the ROI analysis SUVmax and lower SUVmean due to VOI analysis than once as a measure of the wider area as measured ROI analysis. MTV (R2 = 0.999), a result close to the actual size of the tumor. but, more research is needed in this regard, because SUV according to the standards of value are affected.

In this work, electroless Ni-plating on polyethylene terephthalate (PET) ultra-fine fibers surfaces was carried out to improve the electric conductivity of the fiber. The surface properties of PET ultra-fine fibers were characterized using scanning electron microscopy, X-ray diffraction, and contact angle analyses. The electric conductivity of the fibers was measured using a 4-point testing method. The experimental results revealed the presence of island-like nickel clusters on the PET ultra-fine fibers surfaces in the initial plating state, and the electric conductivity of the Ni-plated fibers was enhanced with increasing plating time and thickness of the Ni-layers on the PET ultra-fine fibers.

본 연구에서는 점차 확대되고 있는 애완학습곤충 시장을 올바르게 이해하고 적절한 대응을 하기 위해 실제 소비자들의 이용행태를 모니터링 함으로써 소비자의 욕구를 파악하고자 하였다. 이를 위해 곤충 관련 박물관, 체험관, 곤충농장 등을 방문한 적이 있거나 곤충을 구매한 경험이 있는 소비자가 자신의 블로그에 올린 게시물들을 대상으로 자료를 수집하였으며, 게시물의 사진 및 텍스트를 중심으로 내용분석을 실시하였다. 분석결과 애완학습곤충 시장은 자녀의 교육목적을 위한 초등학교 저학년 이하의 자녀를 동반한 가족형 방문형태인 것으로 나타났다. 방문 목적지는 주로 서울, 경기의 수도권에 집중되어있으며, 자녀의 방학기간을 이용한 방문이 가장 많았다. 사진 분석 결과 체험활동에 대한 높은 관심도를 확인할 수 있었으며, 만족한 내용도 체험거리가 많고 다양하다는 것이었기 때문에 앞으로도 직접 체험할 수 있는 다양한 형태의 수준별 체험 프로그램을 개발하여 제공해야 할 것이다. 또한 불만족한 내용은 곤충에 대한 거부감인 것으로 나타나 곤충에 대한 친근한 이미지를 형성할 수 있도록 다른 동물이나 식물과 연계한 프로그램의 개발 등 노력이 필요할 것이다. 또한 애완학습곤충 시장이 계속 성장하고 발전하기 위해서는 곤충종의 다양화 및 곤충을 활용한 체계화된 체험프로그램의 개발이 필요할 것으로 보인다.

This study was performed to have an effect on control the growth of algae such as "Actinastrum fluviatile" which occurs frequently in the aquaculture tank using by a cold plasma, and it also would be expected to promote the growth of water plants due to active element causing OH radicals in the water. In addition, it was verified on the death rate as 99.9% on the scale protrusion of "Aeromonas hydrophila" as well as E. coli, especially, under extreme conditions more than 100 million pathogenic bacterium in the aqua pet tank, the ornamental fish had to act in a safe and healthy environment at over 98% death rate within 48 hours. It has been proven to give no affect on aerobic bacteria that exist in the filter or soil because there was no residual toxicity in the water tank. As the results, it will help to develop and apply on the sterilization device in other industries as well as aquarium organisms due to adopted energy-saving algorithm and reliability in use.

TiO2 thin films for high energy density capacitors were prepared by r.f. magnetron sputtering at room temperature.Flexible PET (Polyethylene terephtalate) substrate was used to maintain the structure of the commercial film capacitors. Theeffects of deposition pressure on the crystallization and electrical properties of TiO2 films were investigated. The crystal structureof TiO2 films deposited on PET substrate at room temperature was unrelated to deposition pressure and showed an amorphousstructure unlike that of films on Si substrate. The grain size and surface roughness of films decreased with increasing depositionpressure due to the difference of mean free path. X-ray photoelectron spectroscopy (XPS) analysis revealed the formation ofchemically stable TiO2 films. The dielectric constant of TiO2 films was significantly changed with deposition pressure. TiO2films deposited at low pressure showed high dissipation factor due to the surface microstructure. The dielectric constant anddissipation factor of films deposited at 70mTorr were found to be 100~120 and 0.83 at 1kHz, respectively. The temperaturedependence of the capacitance of TiO2 films showed the properties of class I ceramic capacitors. TiO2 films deposited at10~30mTorr showed dielectric breakdown at applied voltage of 7V. However, the films of 500~300nm thickness depositedat 50 and 70mTorr showed a leakage current of ~10−8~10−9 A at 100 V.

This paper has relatively high technical standard and experimental skill. The fabrication of TCO film with hightransparency, low resistance and low chromaticity require exact control of several competing factors. This paper has resolvedthese problems reasonably well, thus recommended for publication. Indium tin oxide(ITO) thin films were by D.C. magnetronroll-to-roll sputter system utilizing ITO and SiO2 targets of ITO and SiO2. In this experiment, the effect of D.C. power, windingspeed, and oxygen flow rate on electrical and optical properties of ITO thin films were investigated from the view point ofsheet resistance, transmittance, and chromaticity(b*). The deposition of SiO2 was performed with RF power of 400W, Ar gasof 50sccm and the deposition of ITO, DC power of 600W, Ar gas of 50sccm, O2 gas of 0.2sccm, and winding speed of 0.56m/min. High quality ITO thin films without SiO2 layer had chromaticity of 2.87, sheet resistivity of 400ohm/square, and trans-mittance of 88% and SiO2-doped ITO Thin film with chromaticity of 2.01, sheet resistivity of 709ohm/square, and transmittanceof more than 90% were obtained. As a result, SiO2 was coated on PET before deposition of ITO, their chromaticity(b*) andtransmittance were better than previous results of ITO films. These results show that coating of SiO2 induced arisingchromaticity(b*) and transmittance. If the thickness of SiO2 is controlled, sheet resistance value of ITO film will be expected tobe better for touch screen. A four point probe and spectrophotometer are used to investigate the properties of ITO thin films.