불투수포장면적의 증가는 도심지 내 열환경 악화, 물순환체계 단절 등의 문제점과 더불어 인간의 여러 가지 신체적･정신적 질병에 원인이 되기도 한다. 이에 도시공원 내 거리에 따른 공기이온 실태와 거리별 기상요소 및 공기이온과의 상관성을 분석하여, 향후 도심지 내 대규모 도시공원 조성 혹은 리모델링에 있어서 기후적 측면의 건강성을 고려한 도시공원 조성의 기초자료로 제시하고자 하였다. 연구대상지는 서울시 송파구 올림픽공원을 대상으로 거리에 따라 4개 유형으로 구분한 뒤, 구간을 A, B로 분류하였다. 측정지점은 80지점을 선정한 후 토지피복 및 식생현황을 조사한 후 기상요소, 공기이온을 측정하 였다. 첫째, 구간별 녹지율은 A구간 Center(90%) > Inner(70%) > Outer-inner(10%) = Outer(10%), B구간 Center(100%) > Inner(60%) > Outer-inner(30%) > Outer(0%) 순이었다. 둘째, 기상요소의 경우 기온의 경우 Outer(24.18℃) > Outer-inner(22.90℃) > Inner(22.43℃) > Center(21.719℃)으로 분석되었으며, 상대습도의 경우 Center(46.49%) > Inner(43.36%) > Outer-inner(42.41%) > Outer(38.53%)으로 분석되었다. 셋째, 공기이온 중 양이온의 경우 Outer(435.71ea/㎤) > Outer-inner(415.16ea/㎤) > Inner(389.46ea/㎤) > Center(352.64ea/㎤)의 순이었으며, 음이온의 경우 Center(569.72ea/㎤) > Inner(499.83ea/㎤) > Outer-inner(410.58ea/㎤) > Outer(292.02ea/㎤) 순으로 Center로 갈수록 증가하는 것으로 분석되었으며, 도로와 가까워질수록 감소하는 것으로 분석되었다. 이온지수의 경우 Center(1.67) > Inner(1.31) > Outer-inner(1.08) > Outer(0.71)으로 분석되었다. 넷째, 상관성 분석결과 정(+)의 상관인 것은 음이온, 이온지수로 도로로부터 공원 Center로 갈수록 증가하는 것으로 분석되었으며, 부(-)의 상관인 것은 기온, 일사량, 양이온으로 도로와 가까워질수록 증가하는 것으로 분석되었다.

PURPOSES : In this experimental study, the resistance of blended cement concrete containing air-cooled slag (AS) and water-cooled slag (WS) to freeze–thaw action was investigated. For comparison, the durable performance of ordinary Portland cement (OPC) concrete exposed to a similar damage environment was also evaluated. METHODS : Based on the ASTM C 666 standard, the relative dynamic modulus of elasticity, mass ratio, surface electric resistivity, and compressive strength of blended cement concrete specimens were periodically measured and compared with those of OPC concrete to evaluate the durability of concrete exposed to the freezing-thawing environment. In addition, microstructural characteristics of deteriorated concrete parts were evaluated using scanning electron microscopy (SEM) and energy dispersive spectroscopy techniques to detect products formed by freeze–thaw action. RESULTS : It was found that the resistance of blended cement concrete containing AS and WS to freeze–thaw action was significantly better than that of OPC concrete. Furthermore, the SEM results revealed the frost damage of OPC concrete, owing to the formation of thaumasite. CONCLUSIONS : The application of AS in concrete can effectively improve the durability of concrete, particularly in freeze–thaw environments.

PURPOSES : This paper presents the experimental results of tests conducted on concrete produced with air-cooled (AS) and water-cooled (WS) ground blast-furnace slag exposed to multi-deterioration environments of carbonation and scaling. METHODS : Carbonated and uncarbonated concrete specimens were regularly monitored according to the ASTM C 672 standard to evaluate the durability of concrete exposed to both scaling and combined carbonation and scaling conditions. Additionally, mechanical properties, such as compressive strength, flexural strength, and surface electric resistivity, were analyzed. RESULTS : It was found that concrete specimens produced with AS and WS had a beneficial effect on the mechanical properties because of the latent hydraulic properties of the AS and WS mineral admixtures. Moreover, carbonated concrete showed good scaling resistance in comparison to uncarbonated concrete, particularly for concrete produced with AS and WS. CONCLUSIONS : The improved scaling resistance of carbonated concrete showed that AS is a suitable option for binders used in cement concrete pavements subjected to combined carbonation and scaling.

The effect of the change in air inflow velocity has been investigated at the opening of the malodor emission source to determine its influence on the Complex odor concentration. Both the Complex odor collection efficiency and concentrations were measured according to the change in airflow velocity. When the air inflow velocity was 0.1 m/s, it was observed that some of the generated gas streams were diffused to the outside due to low collection efficiency. In contrast, only the increased gas collection volume up to 0.5 m/s showed no substantial reduction of the Complex odor concentration, which indicates an increase in the size of the local exhaust system as well as the operation cost for the Complex odor control device. When the air inflow velocity reached 0.3 m/s, the Complex odor concentrations not only were the lowest, but the odorous gas could also be collected efficiently. The air inflow velocity at the opening of the malodor emission source was considered the key factor in determining the gas collection volume. Therefore, based on the results of this study, an optimal air inflow velocity might be suggestive to be 0.3 m/s.

This study was performed to investigate the characteristics of VOCs and carbonyl compounds emitted by smallscale master, offset, and screen printing facilities. During the printing process, concentration measurements of indoor samples were made at each on the printer equipment and the indoor center of the facility. In each case, the window or door served as natural ventilation, and concentration measurements of outdoor samples were made at each air exit point. The results showed that in all printing facilities, the levels of VOCs and carbonyl compounds were much higher in printer equipment compared to indoor levels. Comparative examination of VOCs between printer equipment and the indoors of the facility, the main species of master and offset printer equipment were Methyl isocyanide, 2,2,6-Trimethyloctane, 2,2-Dimethyldecane, 3,7-Dimethyldecane, Toluene, Acetonitrile, and 3- Methoxy-3-methylbutanol. The main species of the indoors of master and offset facilities were Toluene, 2,2,6- Trimethyl-octane, Isopropyl alcohol, 3-Methoxy–3- methylbutanol, Nonane, and Acetone. However, in the screen printing facility, the printer and indoor emission compounds were the same such as 2-Methyl-cyclopentanone, Cyclohexanone, Ethylbenzene, and p-Xylene. Among the compounds released to the outside, Toluene and Acetone were the most abundant species of VOCs and carbonyl compounds, respectively.

High concentrations of PM2.5 were generated in new apartments before moving in, and PM2.5 reduction efficiencies using air cleaners and ventilation systems were evaluated. The experimental results for different air cleaner capacities showed that the PM2.5 reduction efficiencies for 46.2 m2, 66 m2, and 105.6 m2 areas were 81.7%, 92.9%, and 92.5%, respectively. Thus, the larger the air cleaning application area, the higher the PM2.5 reduction efficiency. However, there was no difference in the efficiency of overcapacity air cleaners above a certain capacity. The efficiencies of air cleaners located at the living room center, interior wall, and edge were 81.7%, 79.2%, and 75.8%, respectively. There was, therefore, no significant difference in the PM2.5 reduction efficiencies of air cleaners in different locations. Furthermore, the PM2.5 reduction efficiencies at distances of 1 m, 2 m, and 3 m were 81.7%, 81.3%, and 81.7%, respectively. Therefore, there was also no significant difference in efficiency with distance. The PM2.5 concentration decreases rapidly during natural ventilation. Therefore, when the indoor PM2.5 is higher than the outdoor PM2.5, the air cleaner should be used after natural ventilation. The efficiency of PM2.5 reduction using an air supply-type ventilation system in apartments was 35%, which is not high. The simultaneous operation of the ventilation system and kitchen range hood was effective, showing a PM2.5 reduction efficiency of 69.1%. However, a water sprayer was not effective, showing a PM2.5 reduction efficiency of 24.3%. The results of this study suggest that PM2.5 reduction performance should be standardized by evaluating the efficiency of different ventilation systems. Effective usage and maintenance standards for ventilation systems need to be disseminated, and ventilation systems and air cleaners should be used effectively.

본 연구는 학습자 요구를 바탕으로, 개설을 희망하는 교과목을 분류하면서 진로방 향과 관련된 특수 목적 중국어 교육의 필요성에서 출발하였다. 수업 설계를 위하여 취업환경을 먼저 살펴보고, 선행연구를 통해 좀 더 특수 목적에 맞춘 수업을 설계하 고자 하였다. 본고에서는 부산 B대학의 학생들이 가장 많이 선택한 항공 분야를 선정하여, 지역 대학 인문계열의 중국어 전공자들에게 부합하는 항공서비스 목적 중국어 교육과정의 기본적 틀을 마련하고자 하였다. 또한 특수 목적 중국어 교육과정에 필요한 직무와 학습의 복합형 수업 설계를 위하여 NCS를 활용한 강의계획서도 함께 제시하였다.

In this study, the effects of heat-moisture treatment (boiling or steaming for 45 min) prior to hot air drying (70 o C for 8 h) on water activity (Aw), moisture (MC), Brix, color, and texture of dried sweet potato slices were investigated to identify the best pretreatment condition for producing dried sweet potato with the best eating quality. Dried sweet potato slices pretreated by boiling (BL) showed significantly lower Aw, MC, and hardness while Brix was significantly higher than with steaming (ST) treatment. There were no significant differences for the color, springiness, cohesiveness, gumminess, and brittleness indexes. At 8 h drying, the Aw, MC, Brix, and hardness of the BL and ST samples were 0.81 and 0.82, 19.71% and 25.53%, 53.80% and 49.40%, and 20.49 kg/cm 2 and 31.98 kg/ cm 2 , respectively. This information will be useful for manufacturers in the production of dried sweet potato slices. These findings provide evidence of the feasibility of heat-moisture treatments in the production of dried sweet potato.

해양항공드론은 해양사고의 예방과 대응에 이용할 수 있는 새로운 장비이다. 이러한 해양항공드론을 배치하기 위한 관할구역을 결정하는 것은 정부 의사결정자가 효과적인 정책을 마련하도록 도움을 줄 수 있다. 이 연구의 목적은 F-AHP법과 ARAS법을 이용하여 해양항공드론을 배치하기 위한 적절한 구역을 평가하는 모델을 개발하기 위한 것이다. 그리고 이 제안된 모델의 적용가능성을 확인하기 위해 우리나라 해양경찰청의 관할구역에 적용하였다. 해양항공드론의 배치는 평가요소 사이에 중복이 높은 특징이 있기 때문에 식별된 평가항목의 중요도를 결정하기 위해서 F-AHP법을 이용하였다. 그 결과 해양드론의 배치에 있어서 연안에서의 실종자 항목이 가장 중요 한 평가항목으로 나타났다. 또한 이 연구에서 지역 해양경찰서의 우선순위는 하나의 목표(해양사고 50 % 저감)를 고려할 수 있는 ARAS법을 이용하였다. 그 결과로서 목포 해양경찰서 관할구역의 우선순위가 가장 높게 나타났고, 인천, 서귀포, 태안, 완도, 여수, 포항, 통영, 군산, 보령, 제주, 부안, 동해, 속초, 울산, 울진, 부산, 창원, 평택 해양경찰서 관할구역 순으로 나타났다.

Recently, a study of prognosis and health management (PHM) was conducted to diagnose failure and predict the life of air craft engine parts using sensor data. PHM is a framework that provides individualized solutions for managing system health. This study predicted the remaining useful life (RUL) of aeroengine using degradation data collected by sensors provided by the IEEE 2008 PHM Conference Challenge. There are 218 engine sensor data that has initial wear and production deviations. It was difficult to determine the characteristics of the engine parts since the system and domain-specific information was not provided. Each engine has a different cycle, making it difficult to use time series models. Therefore, this analysis was performed using machine learning algorithms rather than statistical time series models. The machine learning algorithms used were a random forest, gradient boost tree analysis and XG boost. A sliding window was applied to develop RUL predictions. We compared model performance before and after applying the sliding window, and proposed a data preprocessing method to develop RUL predictions. The model was evaluated by R-square scores and root mean squares error (RMSE). It was shown that the XG boost model of the random split method using the sliding window preprocessing approach has the best predictive performance.

Statistical analysis for the 703 air purifiers certified by Korea Air Cleaning Association from 2003 to 2019 was performed. Sixty-one percent of the products had an area coverage of 15 m2~30 m2 and the median value of the total products was 37.6 m2. The number of certified products by the top five manufacturers was 325, which corresponds to 46.2% of the total products. The median value of the clean air delivery rate (CADR) of the 703 products was 4.8 m3/min but the number of air purifiers over the value increased to 62.5%~66.3% since 2018. The odor removal ratio showed a median of 86.0% which was higher than the certification criteria but had large differences in efficacy in the five test compounds. Removal efficiencies of each compound in terms of the median and ratio to the average value showed acetate > formaldehyde > toluene > ammonia > acetaldehyde in descending order with large variances. The median noise level average value from five positions of air purifiers was 47.7 dB(A). However the medians of the top position and the front, where purified air was vented out, were relatively higher in 49.8 dB(A) and 48.2 dB(A), respectively. Noise level ratio to noise criteria had a median value of 96.4%, which showed that most of the noise levels were distributed near the criteria limit. The probability of the noise level at 100% of the criteria was calculated ton 0.232, which indicated excess noise levels.

전 세계 화석 연료 사용이 지속적으로 증가함에 따라 공기 중 이산화탄소(CO2) 농도가 수 세기에 걸쳐 증가하고 있다. 대기로의 CO2 배출을 줄이기 위한 방법으로, 주요 배출원인 발전소와 공장에 적용할 수 있는 이산화탄소 포집 및 저장 (carbon capture and sequestration, CCS) 기술이 개발되고 있다. 기후 변화 완화 정책에 따라 negative emission 기술로 언급 되는 공기 중 CO2 직접 포집 기술(direct air capture, DAC)은 CO2 농도가 0.04%로 매우 낮기 때문에 기존의 CCS 기술에 적 용된 기술과 달리 흡착제를 이용한 저농도 CO2 포집 연구에 집중되어 있다. DAC 분야는 주로 CO2의 흡착을 이용한 습식 흡 착제, 건식 흡착제, 아민 기능화된 소재, 이온교환 수지 등이 연구되었다. 흡착제 기반 기술은 흡착제 재생에 따른 고온 열처 리 공정이 필요하기 때문에 추가적인 에너지 소모가 없는 분리막 기반의 공기 중 CO2 포집 기술의 잠재력이 크다. 분리막은 특히 실내 공기 CO2 저감 환기 시스템 및 실내용 스마트팜(smart farm) 시스템의 연속적인 CO2 공급에 사용될 수 있을 것으 로 기대된다. CO2 처리 기술은 기후 변화를 완화하기 위한 수단으로 개발이 지속되어야 하며 효율적인 공정 설계와 소재 성 능 향상을 통해 공기 중 CO2 포집의 효율을 높일 수 있을 것이다.

The cooking-generated particles are major indoor sources of air pollution. Recently, the performance of the range hood is focused on particle removal performance. Range hood with an auxiliary air supply system can improve the fine and ultrafine particles removal efficiency by making a supply air during cooking activities. The particles were measured in the experimental building by varying ventilation types. Only operating range hood during the cooking activities was not enough to reduce the cooking-generated particles. Despite operating range hood systems, fine and ultrafine particle concentrations were maintained when cooking was finished. The range hood with a make-up air supply system can reduce the indoor particle concentration below background conditions when those systems were operated after cooking. In this study, the assessment of cooking-generated particle removal efficiency of the range hood with an auxiliary air supply system was conducted. The removal efficiency of ultrafine particles showed trends similar to the removal efficiency of fine particles.

The urban expressway is widely used to avoid traffic jams in highly-populated urban areas. However, vehicle exhaust can be easily transported to the neighboring area including residential buildings. In this study, we investigated the transport and penetration of vehicle exhaust into the nearby high-story residential building. Black carbon (BC) and lung deposited surface area (LDSA) concentrations were monitored every 1 min using an aethalometer (AE51, Magee) and a nanoparticle aerosol monitor (AeroTrak 9000, TSI), respectively. For comparison, the measurement was carried out in both the living room and balcony of the apartment from January 18 to January 25, 2016. The CO2 concentration indicated the presence of residents in the living room and transport of vehicle exhaust from the roadway in the balcony. Its diurnal variation showed a significant difference between weekdays and the weekend, implying the different time activity of residents and traffic volume. BC and LDSA concentrations were 1.4±1.5 μg/m3 and 53.9±45.0 μm2/cm3 indoors, and 1.9±1.0 μg/m3, 76.2±34.5 μm2/cm3 outdoors, respectively. The indoor to outdoor concentration ratios range from 0.6 to 0.8, indicating the significant influence of outdoor vehicle exhaust. The highest concentrations of BC and LDSA were observed in the morning rush hours, except for those indoors during the weekend. In particular, the outdoor effect is significant during the morning rush hours. Indoor air quality management is urgently needed for residents living near the urban expressway.

The topic of indoor air quality has attracted great interest since urban dwellers spend over 90% of their time indoors, such as public facilities, public transport and homes. In this study, the changes and current status of indoor air quality management and improvement policies for public facilities in Korea were discussed. Furthermore, we investigated the concentration and contamination status of indoor air pollutants based on the indoor air quality guidance and inspection report from 2007-2017 published by the Ministry of Environment, Korea. As a result, we found that while the PM10 concentration in public facilities decreased consistently, there was no clear change in the CO2 concentration. The HCHO concentrations were high in museums, art galleries, and postpartum centers, etc. The child care centers showed a high concentration of TCB. In conclusion, we suggested that it is necessary to focus on target substances according to the type of facility to manage indoor air quality efficiently. Intensive management and monitoring are particularly needed in child care centers to improve the indoor air quality.