In this study, in order to develop an foaming tablet product using yuzu powder, yuzu powder was manufactured using different drying methods such as freeze-drying, 60℃ drying, and 40℃ drying, and then quality characteristics and functionality were analyzed. The naringin content per g of yuzu powder was 8.9 mg for freeze-drying and 8.8 mg for 60℃ drying, and the hesperidin content per g of yuzu powder was highest at 53.6 mg for freeze-drying and 46.2 mg for 60℃ drying. followed by 40℃ drying (41.7 mg). The tyrosinase inhibitory activity of 60℃ dried powder was found to be twice as high as that of freeze dried powder. Accordingly, in order to develop an inner beauty product, foaming tablets were manufactured using hot air dried powder, and the quality characteristics and functional ingredients of the final foaming tablets were investigated. The foaming tablet prepared with yuzu powder content of 10 and 15% showed an inhibitory activity of tyrosinase of 73.7 %, which was 1.6 times higher than that of ascorbic acid (1 mM), which was a positive control, confirming its melanin production inhibition effect.

Black Soldier Fly Larvae (Hermetia illucens, BSFL) is an environmental purification insect utilized as an animal feed source due to its high protein content. BSFL need to be dried to preserve quality, and the optimal drying method should be cost-effective. In this study, various drying methods (hot air (HD), freeze (FD), vacuum (VD), and combined-drying (CD)) were applied to BSFL, and then BSFL powders were characterized. Crude protein content was highest in HD and lowest in CD, and there was no significant difference in crude fat content (p>0.05). In the measurement of the total amino acid content of BSFL, glutamic acid and aspartic acid were the highest regardless of the drying method. The total amino acid content was the highest in HD and the lowest in CD. Total polyphenol content was higher in VD and FD than in HD and CD. Also, hydrogen peroxide and DPPH radical scavenging showed similar results. In the antioxidant measurement results, VD and FD showed higher antioxidant capacity, but considering cost-effectiveness, HD was the most available method for drying BSFL.

해저 파이프라인 예비커미셔닝(Pre-commissioning) 단계는 입수(Flooding), 배수(Venting), 하이드로테스팅(Hydrotesting), 탈수 (Dewatering), 건조(Drying), 질소충진(N2 Purging)의 공정과정으로 구성된다. 이 중 건조와 질소충진 과정은 운용 중 파이프라인 내부에 하이 드레이트(Hydrate)의 발생과 가스 폭발의 위험을 방지하기 위해 상대습도를 이슬점 아래로 감소 및 유지되도록 규정되어 있다. 본 연구의 목적은 해저 파이프라인 예비커미셔닝 중, 공기건조(Air Drying)와 질소충진 공정과정에 대한 해석법을 개발하고 현장계측 결과와의 상호 비교를 통해 해석법의 활용가능성을 평가하는 데 있다. 해저 파이프라인 내부 상대습도 평가를 위한 방법으로 전산열유체(CFD)를 활용한 해석기법을 도입·적용하였고 해양공사 해저 파이프라인 공기건조와 질소충진 공정과정에 대한 현장계측 결과와 잘 일치함을 확인하였다. 개발된 공기건조와 질소충진 해석법 및 평가방법을 향후 해저 파이프라인 예비커미셔닝 작업의 사전 엔지니어링 도구로 활용할 경우, 작 업생산성 향상에 크게 기여할 것으로 사료된다.

Centella asiatica (CA) has been used as a nutritional plant as well as a traditional herbal medicine around the world. This study, quality component (proximate composition, total polyphenol, and triterpenoid compound), and antioxidant and anti-inflammatory activities of CA dried using various methods were investigated. Proximate compositions of CA with different drying methods included a large amount of carbohydrates, crude protein, crude ash, and crude fiber. Among the drying methods, cold drying provided the highest total polyphenol content and antioxidant activity, while hot-air drying at 75℃ provided the lowest total polyphenol content and antioxidant activity. In addition, when the major triterpenoid compounds of CA were analyzed, the highest content of asiaticoside of triterpenoid glycoside was obtained with all drying methods. With respect to the total triterpenoid, the highest content was obtained with cold drying (68.8 mg/g) whereas natural drying (31.4 mg/g) provided the lowest content. In anti-inflammatory activity of LPS-stimulated RAW 264.7 cells, EtOH extract of cold drying showed a significantly higher inhibitory activity in comparison to the other drying methods. In conclusion, it is considered that the cold drying method is suitable for industrial preparation of functional materials with high physiological ingredients, and antioxidant and anti-inflammatory activities from CA.

우엉을 9번 찌고 9번 말려서 차를 제조한 다음 M사의 우엉차와 성분 및 기능성을 비교 분석하였다. 개발한 우엉차는 칼로리 346.48kcal, 탄수화물 72.75g/100g, 단백질 11.98g/100g, 회분 5.01g/100g이었다. 무기물 함량은 칼륨 1,476.21 mg/100g, 칼슘 255.96 mg/100g, 마그네슘 311.41mg/100g 이었다. 유리당 총량은 31.93 mg/100g이었고 그중 fructose 26.27mg/100g , glucose 4.39 mg/100g, sucrose 1.27 mg/100g이었다. 포화지방산은 40.73 mg/100g, 불포화지방산은 59.28 ㎎ /100g이고 그 중 linoleic acid 41.28 mg/100g, palmitic acid 33.11 mg/100g, oleic acid 10.07 mg/100g , linolenic acid 7.92 ㎎/100g이었다. DPPH 라디컬 소거력은 개발한 차 33.9%, 비교용 M사 차 2.3%, 지표물질 37.2%였다. ABTS 라디컬 소거력은 개발한 차 90.7%, M사차 85.9%, 지표물질 47.6%였다. SOD 유사활성은 개발한 차 11.3%, 비교용차 50.5%였다. 플라보노이드 함량은 개발한 차 2.6 fold, M사차 2.9 fold, 지표물질 1.7 fold였다. 폴리페놀 함량은 개발한 차 33.8 fold, M사차 38.9 fold, 지표물질 13.4 fold였다. 기호도는 1회 우린 것과 5회 우린 것을 비교하였다. 1회 우린 것을 기준으로 할 때 5회 우린 것의 기호도 중 색은 개발한 차 65.9%, M사차 12.8%, 향기는 개발한 차 78.0%, M사차 33.3%, 맛은 개발한 차 71.4%, M사차 20.7%, 나타났다. 이같이 비교용 M사차는 우릴수록 추출 성분이 감소하여 5회 후에 종합적인 기호도는 21.4%로 감소한 반면 개발한 차는 감소폭이 적어서 72.1%를 나타냈다. 이같이 개발한 우엉차는 비교용 M사차 및 지표물질보다 항산화 작용이 강하고 유효 물질 함량도 더 많고, 기호성도 높으므로 질병 예방 및 개선 효과가 클 것으로 생각한다.

돼지감자를 9번 찌고 9번 말려서 차를 제조한 다음 M사의 돼지감자차와 성분 및 기능성을 비교 분석하였다. 개발한 돼지감자차는 칼로리 342.27kcal, 탄수화물 73.87g/100g, 유리당 32.66mg/100g, 회분 6.80g/100g, 단백질 8.21g/100g이었고 무기물 총량은 2,785.67mg/100g, 칼륨 2,563.93mg/g, 칼슘 97.52mg/g, 마그네슘 88.78mg/g 등이었다. 돼지감자차의 유리당 총량은 32.66mg/100g이고 그중 fructose 17.40mg/100g, sucrose 9.03mg/100g, glucose 6.05mg/100g이었다. 돼지감자차의 포화지방산은 30.34mg/100g, 4 불포화지방산은 69.66㎎/100g이었고 그 중 linoleic acid 47.00mg/100g, palmitic acid 25.31mg/100g, linolenic acid 8.61㎎/100g이었다. DPPH 라디컬 소거력은 개발한 차 34.2%, 비교용 M사차 5.2%, 지표물질 44.0%였다. ABTS 라디컬 소거력은 개발한 차 93.0%, M사차 61.9%, 지표물질 47.6%였다. SOD 유사활성은 개발한 차 2.7%, M사차 1.6%였다. 플라 보노이드 함량은 개발한 차 2.8 fold, M사차 2.0 fold, 지표물질 1.7 fold 였다. 폴리페놀 함량은 개발한 차 38.2 fold, M사차 8.92 fold, 지표물질 14.0 fold였다. α-Glucosidase 저해율은 개발한 차 9.83%, M사차 8.92%였다. 기호도는 1회 우린 것과 5회 우린 것을 비교하였다. 1회 우린 것을 기준으로 할 때 5회 우린 것의 기호도 중 색은 개발한 차 83.7%, 비교용 차 50.0%, 향기는 개발한 차 78.0%, 비교용 차 42.5%, 맛은 개발한 차 66.7%, 비교용 차 37.5%, 종합적인 기호도는 개발한 차 73.3%, 비교용 차 47.5%로 나타났다. 이같이 비교용 M사차는 우릴수록 추출 성분이 감소하여 5회 후에 종합적인 기호도는 46.3%로 감소한 반면 개발한 차는 감소폭이 적어서 73.3%를 나타냈다. 이같이 개발한 돼지감자차는 비교용 M사차 및 지표물질보다 항산화 작용이 강하고 유효 물질 함량도 더 많고, 기호성도 높으므로 질병 예방 및 개선 효과가 클 것으로 생각한다.

Spray freeze-drying (SFD) is a comparatively new method of producing biopharmaceutical powder preparations. In this study, Lactobacillus casei (IFO 15883)was spray freeze-dried to obtain a fine probiotic powder. The survival rate of L. casei in the powder after the SFD process was measured using plate agar counting. To improve the survival rate of L. casei during the SFD process, various experimental conditions were carried out. Among five growth media compositions, in Lactobacilli MRS broth with 1% mannose and 0.1% CaCO3, the viability of the freeze-dried powder was not significantly different from that of the initial powder (p>0.05). The most effective air pressure and protective agentduring SFD were 20 kPa and buffered peptone water (BPW), respectively. Scanning electron microscopy (SEM) was applied to estimate the physical structure and properties of the particles. SFD probiotic particles were of various shapes and sizes with porous structures under different SFD conditions. The average diameter of optimized probiotic powder particles with annealing was 24.8 μm. The survival rate of the final SFD probiotic powder under conditions was 97.7%.

In this study, a method to produce a fine volatile powder extracted from shiitake mushrooms using spray freeze-drying (SFD) was investigated. The analysis of the water-soluble aromatic compounds was carried out by headspace solid phase micro-extraction (HS-SPME) coupled withgas chromatography-mass spectrometry (GC-MS). Scanning electron microscopy (SEM) and laser particle size analysis were applied to characterizethe physical structure and size distribution of the SFD-derivedparticles. Eleven key volatile compounds were identified in the extracts of shiitake mushroomspre- and post-SFD. Recoveries of aromatic volatiles ranging from 30.9 - 82.9% were observed in the overall flavor profile results from the powder obtained with SFD. SEM analysis demonstrated that the particles of the aromatic powderwere spherical in nature, having highly porous surfaces andmean diameters of 19.3 μm.

The total polyphenol and physiological activities of Pleurotus ostreatus 30% fermented ethanol using different drying methods and extraction periods were investigated. Based on the observed polyphenol content and physiological activity, freezedrying showed better results than hot air-drying method for P. ostreatus extracted with 30% fermented ethanol for more than 15 days. The total phenolic compound content of ‘Gosol’ following thefreeze-drying method for 15 days showed the highest value of 0.49±0.02 mg/mL. Freeze-drying with extraction for 30 days for ASI 2344 showed the highest antioxidant activity based on the DPPH radical scavenging rate of 35.50±3.29%. Freeze-drying ‘Gosol’ for 30 days resulted inthe highest anti-inflammatory and nitrite scavenging activity of 48.40±3.38%. Our results showed that P. ostreatus is a functional food.

콩나물과 같은 고섬유질 야채류의 동결건조 후 조직감 개선을 위한 전처리 방법을 연구한 결과 예비 열처리와 하 이드로콜로이드 및 당 용액 침지를 조합, 적용시 건조 후 조직수축이 개선되고 복원력이 향상 되었다. 100oC의 0.5%(w/w) 염화나트륨 용액에서 2분간 예비열처리한 다음 0.5% 알긴산나트륨과 1.0% 슈크로오스을 첨가한 상온의 용액에서 60분 교반 침지시 열수 복원 후 전반맛, 식감, 외관 등의 관능 품질이 100oC 물에서 1분간 예비 열처리 한 시료 보다 1.6점이나 더 우수하여 큰 개선 효과를 나타 내었으며, 기계적 측정치에서는 전처리 콩나물 줄기의 경 도값이 0.27 kgf로 가정 조리식의 0.26 kgf와 거의 근접한 수치를 보였다. 이러한 전처리 공정을 대파, 쑥갓, 고사리 등의 다양한 고섬유질 동결건조 야채류에 적용시 관능품질 및 복원력이 향상될 것으로 기대되므로 산업화에서 적용 가능성이 높다고 할 수 있다.

This research is a basic researching process for producing solid fuel that mixing paper sludge and Heat Transfer Medium Oil. Under the presence of Heat Transfer Medium Oil, paper sludge is heated and dried with home appliance microwave for comparing drying efficiency and energy efficiency of different types of drying method. As a result, Heat Transfer Medium Oil and paper mixing case of drying method, OMD, is the most efficient way to shorten the time for evaporating moisture in the paper sludge. In addition, heat transfer effect and density is increased with adding Heat Transfer Medium Oil by microwave. Future more, OMD's energy cost for evaporating whole moisture is 78% cheaper than MD. Also, OMD process shows the best energy efficiency with comparing other process. Evaporation rate of paper sludge evaporation process with microwave is 11.66% increased by adding Heat Transfer Medium Oil 150g. Preheating Heat Transfer Medium Oil or improving different ways injecting Heat Transfer Medium Oil is a good way to increase a rate of initiative moisture evaporation process.

In order to fabricate the porous metal with controlled pore characteristics, unique processing by using metal oxide powder as the source and camphene as the sublimable material is introduced. CuO powder was selected as the source for the formation of Cu metal via hydrogen reduction. Camphene-based CuO slurry, prepared by milling at with a small amount of dispersant, was frozen at . Pores were generated subsequently by sublimation of the camphene. The green body was hydrogen-reduced at for 30 min, and sintered at for 1 h. Microstructural analysis revealed that the sintered Cu showed aligned large pore channels parallel to the camphene growth direction, and fine pores are formed around the large pore. Also, it showed that the pore size was controllable by the slurry concentration.

This study was conducted to confirm the effect of drying method on quality of popped rice for making salyeotgangjung(popped rice lump with malt syrup) in process of drying gelatinized rice. The drying were performed at dry oven or convection oven, at 30℃, 50℃ and 105℃, respectively. There were not significant differences in the hardness of popped rice among the drying methods. The dry at 30℃ constant in dry oven showed higher popping rate, good external surface, uniformed and well developed internal cell size. The dry at 30℃ in convection oven and 50℃ constant temperature in dry oven showed low expansion and poor external surface, respectively. In conclusion, the drying at 30℃ in non-convection oven had the highest quality of popped rice for salyeotgangjung.

분무건조법으로 용사용 원적외선 세라믹/알루미늄 복합분말을 제조하여 플라즈마 용사법으로 알루미늄 모재에 용사한 후, 미세구조, 결정상, 열충격저항성 그리고 분광복사율을 조사하였다. 분무건조된 복합분말의 입형은 구형으로 34~105μm . 영역에서 높은 복사율을 보였다. 그러나 알루미늄 첨가량이 증가할수록 원적외선 방사특성은 감소하였다. 결과적으로 용사법으로 원적외선 방사특성의 큰 손실 없이 방사체를 제조하기 위해서는 20~30%wt%Al를 첨가하여 복합분말을 제조하는 것이 가장 효율적이라고 판단된다.

This experiment was canied out to determine the effect of cultivar, harvest date and drying method on the changes of moisture content and quality of spring harvest oat(Avena sativa L.) hay. Disign of the experiment was a spilt-split-plot arrangement with

건시의 품질향상을 위하여 국내 유명산지의 건시를 시료로 하여 건시의 제조시험과 품질평가에 관한 기초자료로서 그 품질요소를 조사하였다. 건시의 수분함량은 30-36%였으며, 탄닌함량은 0-20%로 무처리구는 CO2와 alcohol 처리구보다 그 함량이 높게 나타났다. 전당함량은 55-60%였고 그 구성은 glucose와 fructose로 구성되어 있었다. 열풍건조에 의한 건시의 제조는 천일건조보다 그 품질이 전반적으로 우수하였으며 특히 slice 한 제품의 품질은 전과의 경우보다 비교적 우수하였다.

Background : Aralia cordata and Polygonum multiflorum GAP cultivation requires a stable drying and storage settings after harvesting. therefore, this experiment was performed in order to effectively manage the physical, chemical and biological hazards. Methods and Results : Test materials were used biennial Aralia cordata, Polygonum multiflorum harvested from the medicinal testing ground. The drying temperatures were treated with 40, 50, 6 0℃ and natural drying. Storage containers were stored in plastic boxes, styrofoam boxes and kraft paper containers, examined the color and quality changes for eight months. Aralia cordata and Polygonum multiflorum drying temperature is dry it took natural drying 720 hours, 40℃ hot air drying 180 hours, 50℃ hot air drying 168 hours and 60℃ hot air drying 108 hours. However, the difference chromaticity of the Lab value corresponding to the temperature does not appear, it was good to dry in a short time at 60℃. Aralia cordata and Polygonum multiflorum stored in a styrofoam box storage method but can be stored at room temperature for up to four months, began to decay caused by moisture content it continues to increase. In plastic box in case of Aralia cordata and kraft vessel in case of Polygonum multiflorum can be stored for eight months in room temperature without decay. Styrofoam boxes stored at 5℃ cold storage were higher water absorption such as room temperature, but decay did not occur. Plastic box and styrofoam box were a tendency such as room temperature. Conclusion : Aralia cordata and Polygonum multiflorum are thought that the color change is not large depending on the drying temperature the lower the water content. Styrofoam storage box, the air permeability is higher than plastic boxes and containers Kraft vessel, decay occurs expected increase.

아로니아의 활용성 제고를 위하여 건조방법에 따른 품질 특성을 비교한 결과, 건조과정 중 중량변화율은 진공동결 건조가 81.6%로 가장 많은 중량감소를 나타내었고, 수분함 량은 진공동결건조에서 가장 많은 수분이 감소하였으며, 건조 후 최종 수분함량은 진공동결건조에서 0.99%로 가장 낮은 함량을 나타내었다. 색도 측정결과, L*값은 건조방법 에 따른 큰 차이를 나타내지 않았으며, a*값과 b*값은 진공 동결건조와 냉풍건조에서 증가하였고, 열풍건조에서는 감 소하였다. 경도는 열풍건조에서는 건조 36시간 이후 급격 하게 증가하였고, 냉풍건조는 서서히 증가하다가 132시간 이후 급격하게 증가하는 모습을 보였다. 건조방법에 따른 품질특성으로 건조수율은 냉풍건조가 24.20%로 가장 높았 으며, 열풍건조 20.40%, 진공동결건조 19.41% 순으로 나타 났다. 일반성분은 생과에서 수분이 61.76%로 가장 높게 나타났으며, 조회분은 열풍건조에서 가장 높게 나타났고, 가용성무질소물, 조단백, 조지방은 진공동결건조에서 가장 높은 함량을 나타내었다. 건조방법에 따른 아로니아의 pH 는 3.84~3.92로 큰 차이가 없었으며, 당도는 동결건조 (6.57°Brix) > 열풍건조(5.37°Brix) > 냉풍건조(4.40°Brix) > 생과(1.07°Brix) 순으로 나타났다. 무기질 함량은 진공동 결건조에서 가장 높았으며, 주요 무기질은 K, Ca, Mg, Na인 것으로 나타났다. 아로니아에 함유된 당은 fructose, glucose 두 종류인 것으로 나타났으며, 진공동결건조가 20.59 g/100g으로 가장 높은 함량을 가진 것으로 나타났다.