There has been a tectonic shift in the trade relationship between the United States (US) and China. This can be seen in the passage of new US legislation, recent US trade restrictions on exports and investment transactions with China, and worsening US relations with the World Trade Organization (WTO), particularly with its dispute resolution system. The Trump administration initiated a haphazard tariff and trade war with China, reversing decades of US trade policy pursuant to its long-standing stances of supporting free trade. To the dismay of many in the trade community within the US and globally, the trade actions by President Trump have been significantly extended and broadened by the Biden administration in its first two years, despite the expectation that it would reverse many of Trump’s policies. In this article, I present seven observations concerning President Trump’s and President Biden’s trade policies.

For licensees who face the decommissioning project for the first time, even if they can utilize their experience in operation, they should be well prepared and assessed for the risks of dismantling activities reflecting the characteristics of decommissioning. This can be included in the risk management of the decommissioning project, but what we want to discuss in this study is the evaluation of the industrial risk of the actual work before the dismantling work is carried out. We would like to focus more on the review of dismantling activities subject to industrial risk assessment and a series of processes for risk assessment. The dismantling work plan will need to obtain approval from the supervisory department before work on the Systems, Structures, and Components (SSCs) can be carried out. At this time, risk assessment may be included among many safety-related required documents, which are divided into radiological and non-radiological risks. The target activities at Level 1 level can include preparation for dismantling and maintenance of facilities, dismantling big components, removing the contamination of concrete structures, managing radioactive waste, etc. In addition, it can be composed of preparation work, removal of connections, lifting/installation, cutting, radiation/radioactivity measurement, and withdrawal as detailed work stages of each item’s activities. For domestic nuclear decommissioning projects, two major performance organizations, licensees and contractors, must be considered. Regarding risk assessment, the licensee will have a supervisory department controlling decommissioning activities and an HSE department at the site, and a process will need to be established in consideration of the contractor’s work organization. Therefore, activities in the risk assessment process may be established. In this study, risk assessment was reviewed as safety-related matters to be considered when carrying out the dismantling work. Safety-related risk assessment is a necessary procedure for performing practical dismantling activities, and this should be considered well in advance. Therefore, work activities and criteria were established for risk assessment, and the performance process was assumed to apply them. In terms of the performance organization and the responsibilities and roles of the processes to be performed by each organization were constructed, and this can be referred to in the process of preparing for the decommissioning project.

The rate of industrial accident reduction is slowing down as the attention of the Ministry of Employment and Labor and related agencies on risk assessment systems decreased. this paper focuses on weakness of legal system for the risk assessment in recent years. A survey was conducted to identify the status and condition of the risk assessment system applying on small and medium-sized manufacturing companies. A set of questionnaires is designed to reflect various perspectives of the companies regarding the problems and solutions of the system. The results refer that differentiated instructions and support systems in response to the actual conditions of the companies are mandatory to reinforce the efficiency of risk assessment system.

In general, companies operate systematically in response to financial risks such as exchange rates and liquidity, while they are vulnerable to risks in the manufacturing and sales processes. In particular, logistics refers to the activities for planning, managing and implementing efficient flows from the starting point of goods and products to the point of consumption, The purpose of this study was to develop key risks and key risk management indicators (KRIs) for risks that undermine logistics efficiency so that logistics risks can be effectively prevented and managed. As a result, 40 risk management indicators (KRIs) were developed in a total of six categories in the logistics sector, and the definition, calculation method and early warning grade of each KRI were presented so that companies could prevent risks in advance in logistics activities and contribute to enhancing efficiency of their work.

In this study, 40 residents of the Gwangyang and Yeosu areas were assessed for their level of exposure to heavy metals (As, Cd, Ni) from April 2017 to June 2018. The aim was to understand the differences in levels of indoor exposure to heavy metals (As, Cd, Ni), and a health risk assessment was conducted to determine whether there was any fatal cause from carcinogenic elements. The mean concentrations of PM10 particles indoors were As 0.24 μg/m3, Cd 0.07 μg/m3, and Ni 0.89 μg/m3. The health risk assessment for the arsenic, cadmium, and nickel in indoor air confirmed that the mean values exceeded the cancer risk tolerances specified by the U.S. EPA, for As (males 3.07 × 10−4, females 3.35 × 10−4), Cd (males 3.83 × 10−5, females 4.18 × 10−5), and Ni (males 6.36 × 10−5, females 6.95 × 10−5).

The mortality rate in industrial accidents in South Korea was 11 per 100,000 workers in 2015. It’s five times higher than the OECD average. Economic losses due to industrial accidents continue to grow, reaching 19 trillion won much more than natural disaster losses equivalent to 1.1 trillion won. It requires fundamental changes according to industrial safety management. In this study, We classified the risk of accidents in industrial complex of Ulju-gun using spatial analytics and data mining. We collected 119 data on accident data, factory characteristics data, company information such as sales amount, capital stock, building information, weather information, official land price, etc. Through the pre-processing and data convergence process, the analysis dataset was constructed. Then we conducted geographically weighted regression with spatial factors affecting fire incidents and calculated the risk of fire accidents with analytical model for combining Boosting and CART (Classification and Regression Tree). We drew the main factors that affect the fire accident. The drawn main factors are deterioration of buildings, capital stock, employee number, officially assessed land price and height of building. Finally the predicted accident rates were divided into four class (risk category-alert, hazard, caution, and attention) with Jenks Natural Breaks Classification. It is divided by seeking to minimize each class’s average deviation from the class mean, while maximizing each class’s deviation from the means of the other groups. As the analysis results were also visualized on maps, the danger zone can be intuitively checked. It is judged to be available in different policy decisions for different types, such as those used by different types of risk ratings.

Korea`s industrial death rate is 13 percent in 2015. It’s five times higher than the OECD average. Economic losses due to industrial accidents continue to grow, reaching 19 trillion won in natural disaster losses equivalent to 1.1 trillion won, requiring fundamental changes in industrial safety levels. In this study, We classified the risk of accidents in industrial complex of Ulju-gun using spacial analysis and decision tree methodologies. We draw the main factors that affect the accident and developed the four risk category(alert, hazard, caution, and attention). It is judged to be available in different policy decisions for different types, such as those used by different types of risk ratings, targeted education, and technical support.

Precautionary measures are cost-effective for the introduction and management of industrial insects. However, the Influx of exotic pests has not been managed very well in Korea, because of the system problems such as the lack of quarantine facilities. Additionally, there is no managing facilities or regulations for their installation according to the categories about industrial insects in Korea. Firstly, we studied the foreign guidelines for arthropod containment system such as ACLs(Arthropod Containment Levels) and the applicable guidelines for insect quarantine facilities in Korea. Secondly, we classified the types of industrial insects by their characteristics and considered the practicable guidelines for installation of quarantine facilities according to the industrial insect types. Lastly, with the related references including the details about installation and management for LMO(Living genetically Modified Organism) research facilities, we discussed appropriate guidelines for installation and management of pest quarantine system in Korea.

Currently, honeybee colonies are not stable and suffer from the infection of pathogens, affecting the pollination. For the alternatives to this difficulty, Bombus terrestris has been imported and used for pollination in agricultural fields. Although imported insects for pollination are very useful, the potential risk exposing to novel pathogens has been raised. To assess the risk primarily, we designed and synthesized PCR primers for detection of pathogens and parasites in B. terrestris. The samples were obtained from companies importing B. terrestris or field collections and genomic DNAs not showing physical shearing were purified. PCR for detection of pathogen- or parasite-specific gene revealed several DNA fragments were amplified in expected molecular size including Kashmir Bee Virus, Varroa jacobsoni, V. rindereri, Acarapis woodi and Aspergillus flavus. These amplified DNA fragments are in the process of cloning for DNA sequencing to confirm the target gene amplification. We also have plans to optimize the PCR conditions for each amplified target gene and try to develop biomarkers for diagnosis.

The purpose of this study is, by recognizing that recently, as crimes using information and various adverse-effect phenomena such as hacking and virus occur frequently with rapid development of information network such as Internet in every field of industry, the range of security is widening to the field of industrial areas for preventing the leaking of industrial technology and protecting that technology as well as information security only limited to IT area, and by establishing common concept about industrial security through education on the industrial security at the point of increasing importance of industrial security, to prepare the base of comprehensive risk management system for protecting company's assets (physical factor, technical factor and managerial factor) safely from the random threats or attacks inside and outside the company through assessment of important assets of the company, evaluation of threats and weak points, and risk assessment by building industrial security management system in order to protect company's information assets and resources which are connected to the existence of the company safely from the threats or attacks from inside or outside the company and to spread stable business activities.

In this paper the lifetime risk assessment of exposure to airborne volatile organic compounds (VOCs) in environmental atmosphere was carried out in one of the Korean industrial city, Gumi based on their measurements of VOCs at five representative outdoor monitoring sites. According to this study toluene, trichloroethylene, and dichloromethane are three main VOCs in Gumi. The carcinogenic risks 5the carcinogenic VOC are greater than the benchmark concentration (1.0E-6) in all five designated sites. Particularly, the Lifetime Cancer Risk in industrial complex 1 and 2 reached 9.64E-5 and 1.32E-4, respectively, both of which are far higher than the benchmark risks. The components of predominant risk in industrial areas are found as chloroform, benzene and trichloroethylene, while those of other sites are benzene and chloroform. It was estimated that the contributions of those componentsto cancer risk are not less than 90%. For non carcinogenic VOCs, the total hazard indices in 5 monitored sites are less than 1. The hazard index in industry complex No. 2 recorded the highest among 5 sites up to 0.663 due to the dominant contribution of 1, 2-dichloropropane by up to 50% (0.335). Based on this analysis, effective emission reduction for chloroform, benzene, trichloroethylene, and 1,2-dichloropropane will rapidly I the cancer risks and hazard indices in Gumi.

This research had been conducted from May to October 2007, studying 110 residents of G, Y, H industrial area in Jun-nam province. It is designed to understand the difference in levels of indoor, outdoor and personal exposure to VOCs(benzene, toluene, Ethylbenzene) and a health risk assessment was conducted to see if there was any fatal cause from carcinogenic or non - carcinogenic elements from a case group and a control group in all areas as well as each different area. In the case of benzene in the air, the geometric levels for the case group are indoor, outdoor and personal exposure; a higher than for the control group. As a results of the Monte - Carlo study about benzene, it shows that the case group’s carcinogenicity is higher than that of the control group and it also shows that, on the CTE, RME condition and Monte - Carlo analysis, all subjects are seen to exceed the carcinogenicity tolerance 10-6 of US EPA. In the case of toluene, ethylbenzene on the CTE, RME condition and Monte - Carlo analysis, these do not exceed the non - carcinogenic standard of 1, but toluene in RME condition for both groups’ personal exposure and the indoor and personal exposure of ethylbenzene in Monte - Carlo show that these seem to exceed the standard.

The present study evaluated residential exposure to atmospheric formaldehyde and acetaldehyde according to distance from the a dyeing industry complex (DIC). This purpose was achieved by measuring concurrently the outdoor air concentrations in residences near the DIC and a certain distance away, plus the outdoor air concentrations at two industrial areas within the DIC boundary. Formaldehyde concentrations (median values of 24.3 and 22.5 μg/㎥ in IS1 and IS2, respectively) were higher than acetaldehyde concentrations (median values of 7.4 and 7.3 μg/㎥ in IS1 and IS2, respectively) at both sites. However, there was no significant difference in the industrial outdoor air concentrations of both formaldehyde and acetaldehyde between the two sites. In addition, the median formaldehyde concentration from the residential site near the DIC (RS1) was about 1.5 times higher than that from the residential site far away from the DIC(RS2), and the median acetaldehyde concentration from RS1 was about 1.3 times higher than that from RS2. It is noteworthy that the mean or median risk as well as these maximum risks are well above the USEPA's permissible risk level of 10 -6 from environmental exposure. This suggests that appropriate management for formaldehyde and acetaldehyde is necessary in order to decrease risk of the residents of study areas, regardless of the distance from the DIC.