Wide-area surface decontamination is essential during the sudden release of radioisotopes to the public, such as nuclear accidents or terrorist attacks. A spray coating composed of a reversible complex between poly (vinyl alcohol) (PVA) and phenylboronic acid-grafted poly (methyl vinyl ether-alt-mono-sodium maleate) (PBA–g–PMVE–SM) was developed to remove radioactive cesium from surfaces. The simultaneous spay of PVA and PBA–g–PMVE–SM aqueous polymer solutions containing Cs adsorbent to contaminated surfaces resulted in the spontaneous formation of a PBA–diol ester bond-based gel-like coating. The Cs adsorbent suspended in the gel-like coating selectively removed Cs-137 from the Cs-contaminated surface. The used gel-like coating were removed from surfaces by simple water rinsing. This recovery way has advantages compared with costly incineration to remove the organic materials for final disposal/storage of the radioactive waste. Thus, our spray coating is suitable for practical wide-area surface decontamination. In radioactive tests, the hydrogel containing Cs-adsorbent showed substantial Cs-137 removal efficiencies of 96.996% for painted cement and 63.404% for cement, which are 2.33 times better than the values for the commercial surface decontamination coating agent DeconGel.

Background: Choosing to perform squats on an unstable surface potentially offers advantages surpassing those of their stable counterpart. Objectives: The purpose of this study was to compare muscle activation during squats on stable and unstable surfaces and investigate the relationship among thigh muscles. Design: Observational study. Methods: Nineteen adults participated in this study. The stable surface consisted of a flat floor. The unstable surface involved the use of an air cushion. An air cushion was positioned beneath each foot of the study participants. Surface electromyography was employed to measure muscle activation. %MVC was calculated by measuring muscle activation during squat execution and manual muscle testing. Results: The comparison of muscle activation during squats between stable and unstable surfaces revealed a significant difference in the rectus femoris and biceps femoris (P<.05). On stable surfaces, positive correlations were observed in the rectus femoris, vastus lateralis, and vastus medialis (P<.05). On unstable surfaces, positive correlations were found between the rectus femoris and vastus medialis (P<.05). Conclusion: This study observed an increase in muscle activation of the rectus femoris and biceps femoris during squats on an unstable support surface compared to a stable support surface.

ATP luminescence measurements (using Relative Light Units, RLU) has been used to assess the levels of bacterial contamination on the surfaces of various materials. However, not much is known about their suitability in assessing bacterial contamination on paper surfaces. This study was conducted to evaluate the feasibility of using ATP luminometers in measuring levels of bacteria contamination on paper surfaces. The three ATP luminometers studied were Clean-Q, smart PD-30, and 3M™ Clean-Trace™ LM1 manufactured by different companies. There were some differences in RLU results among the three ATP luminometers when they were tested with different concentrations of Micrococcus luteus cell suspension. 106 - 107 cells were required in order to effectively detect Bacillus subtilis, Escherichia coli, and Micrococcus luteus on the surfaces of A4 printing sheets (100 cm2) when using the three ATP luminometers. The sizes and physical properties of surface areas varied slightly among the swabs used for the three ATP luminometers. Concentration-specific measurements (RLU) of M. luteus taken from the surfaces of six kinds of paper (fine print paper, medium print paper, ground paper, newsprint paper, practice paper, tracing paper) were possible using the smart PD-30 and LM1 ATP luminometers. ATP detection values of M. luteus varied among the six types of paper. The highest ATP detection values were found on the surfaces of tracing paper. If the RLU value is recorded at the level of 1000, this could indicate a very high bacterial contamination level of 105 to 106 CFU/4 cm2.

Peanut is a well-known food allergen that causes adverse reactions ranging from mild urticaria to life-threatening anaphylaxis. Consumers suffering from peanut allergies should thus avoid consuming undeclared peanuts in processed foods. Therefore, effective cleaning methods are needed to remove food allergens from manufacturing facilities. To address this, wet cleaning methods with washing water at different temperatures, abstergents (peracetic acid, sodium bicarbonate, dilute sodium hypochlorite, detergent), and cleaning tools (brush, sponge, paper towel, and cotton) were investigated to remove peanuts from materials used in food manufacture, including plastics, wood, glass, and stainless steel. Peanut butter was coated on the surface of the glass, wood, stainless steel, and plastic for 30 min and cleaned using wet cleaning. The peanut residue on the cleaned surfaces was swabbed and determined using an optimized enzyme-linked immunosorbent assay (ELISA). Cleaning using a brush and hot water above 50oC showed an effective reduction of peanut residue from the surface. However, removing peanuts from wooden surfaces was complicated. These results provide information for selecting appropriate materials in food manufacturing facilities and cleaning methods to remove food allergens. Additionally, the cleaning methods developed in this study can be applied to further research on removing other food allergens.

2017년 지진에서 다수의 필로티형 건물에 손상이 발생함에 따라 필로티형 건물의 내진성능 평가의 중요성이 대두되 었다. BST면의 활용과 검증은 여러 연구자들에 의해 이미 수행되었다. BST면을 활용하여 필로티형 건물의 횡저항성능을 파악 할 수 있다면, 필로티형 건물의 초기 계획 또는 내진보강 계획 시 횡력저항 시스템을 배치하는데 도움이 될 것이다. 이에 본 연 구에서는 필로티형 건물에 BST면의 적용가능성을 파악한 후, 실제 지진피해를 입은 필로티형 건물의 보강 전과 후의 BST면을 비교하여 횡저항성능을 파악하였다. 그 결과 손상된 필로티형 건물을 보강함에 있어 보강된 평면의 BST면과 밑면 전단력에 대 한 비틀림 모멘트의 비를 기울기로 하는 거동 분석을 통해 필로티형 건물의 횡저항성능을 파악함으로써 보다 효과적인 보강방 안을 제시할 수 있었다.

An hydrogen adsorption study on graphene-based surfaces consisting of nitrogen-doped graphene and core–shell type catalysts of initially Pd13 , Pt13 , PdPt12 and PtPd12 core–shells, is presented in this work. Density functional theory results indicate correlation between charge transfer and structural properties, hydrogen adsorption energies, magnetic behavior and electronic properties. Reduction of hydrogen, together with higher values of charge transfer was observed for high hydrogen dissociation, compared to the case of non-hydrogen dissociation. In some cases, these values may be almost an order of magnitude larger than that of non-hydrogen dissociation. Hydrogen dissociation is also related to oxidation of the surface and correlates with a non-core shell-type structure, high adsorption energies and low magnetic moments, in general. Besides, core shell-type structure dramatically changes the magnetic and electronic properties of charge transfer. The results obtained in this work may provide important information for storing hydrogen.

Carbon steel pipes, which are essentially used in the manufacturing industry, are used in various fields due to the advancement of the industry, and a cutting process is essentially applied to pipes manufactured in a nominal size. The cutting process is the most basic and first process used to obtain a material in a desired shape, and it can affect the quality of subsequent processes such as welding or painting, so high-quality cutting surfaces are essential. Therefore, due to the advantage of improving productivity, it is essential to study to secure the appropriate quality of the cutting surface of the plasma cutting process, which is widely used in the industrial field. In this study, the effect of cut surface quality according to process parameters in the plasma cutting process for carbon steel pipe materials was analyzed. The surface roughness was measured to determine the quality of the cut surface, and the relationship between the surface roughness and the process variables was confirmed by selecting the arc current and cutting speed, which are identified as the main factors forming the surface roughness, as process variables.

Background: Changes in foot sole shape can result in plantar muscle weakness, lack of proprioception, increased ankle instability, and an inability to balance. Objectives: To investigated whether different floor surfaces influenced the effect that short-foot exercises have on the foot core system of healthy individuals. Design: Pretest-posttest control group experimental design. Methods: This exercise shortens the length of the foot by raising the medial longitudinal arch, strengthening the intrinsic muscle of the sole, and maintaining the shape of the medial longitudinal arch. Results: There was a significant difference in the angle of the medial longitudinal arch in the mat exercise group (MEG) and vibration exercise group (VEG) before and after the intervention (P<.05). As the arch angle decreased, the arch height increased. Post hoc analysis showed that there was no difference between the floor exercise group (FEG) and MEG or between the MEG and VEG (P>.05). In terms of the weight distribution index (WDI, there was a significant difference in the MEG and VEG (P<.05) but not in the FEG before and after the intervention (P>.05). The post hoc analysis results showed that there was no difference between the FEG and MEG (P>.05). Conclusion: Various methods to improve the strength of intrinsic muscles of the sole are more effective than no stimulation, and that short-foot exercise combined with sensory stimulation can be recommended for maintaining and increasing the medial longitudinal arch.

Polarimetric measurements of the lunar surface from lunar orbit soon will be available via Wide-Field Polarimetric Camera (PolCam) onboard the Korea Pathfinder Lunar Orbiter (KPLO), which is planned to be launched in mid 2022. To provide calibration data for the PolCam, we are conducting speckle polarimetric measurements of the nearside of the Moon from the Earth’s ground. It appears that speckle imaging of the Moon for scientific purposes has not been attempted before, and there is need for a procedure to create a “lucky image” from a number of observed speckle images. As a first step of obtaining calibration data for the PolCam from the ground, we search for the best sharpness measure for lunar surfaces. We then calculate the minimum number of speckle images and the number of images to be shift-and-added for higher resolution (sharpness) and signal-to-noise ratio.

In this study, visualization of droplet impact on hydrophobic micro-, micro/nano-textured surfaces and lubricant infused surfaces was performed. Experimental specimens were fabricated using MEMS (micro- electromechanical systems) techniques and droplet impact with pure water was visualized at various Weber number range (2 < We < 200) using a high speed camera at 8000 frames per second. Through this study it was confirmed that, various droplet impact behaviors were appeared as the Weber number was increased and the Weber number at which droplet impact behavior changes was affected by surface characteristics. Particularly, on the lubricant infused surface (LIS) after droplet impact retraction velocity is reduced by the lubricant viscosity effect during contraction process of droplet to improve the droplet deposition behavior on the surface. It was confirmed that droplet break up phenomena caused interfacial instability was slightly delayed on LIS due to the viscous dissipation effect during droplet impact process.

Cerium oxide (ceria, CeO2) is one of the most wide-spread oxide supporting materials for the precious metal nanoparticle class of heterogeneous catalysts. Because ceria can store and release oxygen ions, it is an essential catalytic component for various oxidation reactions such as CO oxidation (2CO + O2 2CO2). Moreover, reduced ceria is known to be reactive for water activation, which is a critical step for activation of water-gas shift reaction (CO + H2O → H2 + CO2). Here, we apply van der Waals-corrected density functional theory (DFT) calculations combined with U correction to study the mechanism of water chemisorption on CeO2(111) surfaces. A stoichiometric CeO2(111) and a defected CeO2(111) surface showed different water adsorption chemistry, suggesting that defected CeO2 surfaces with oxygen vacancies are responsible for water binding and activation. An appropriate level of water-ceria chemisorption energy is deduced by vdW-corrected non-local correlation coupled with the optB86b exchange functional, whereas the conventional PBE functional describes weaker water-ceria interactions, which are insufficient to stabilize (chemisorb) water on the ceria surfaces.

식중독 미생물이 polyethylene과 stainless steel의 표면에서 biofilm을 형성하는 특성에 대하여 온도와 시간이 미치는 영향을 조사하였다. 식중독 미생물 6종(Bacillus cereus, Listeria monocytogenes, Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and Salmonella Typhimurium) 32균주를 대상으로 예비실험을 하여 각 종별로 biofilm 형 성능이 강한 1균주씩을 선발하였다. 시험한 식중독 미생물 6종 모두 온도가 증가함에 따라 biofilm 형성능이 증가하였으며, 식중독 미생물의 종류와 polyethylene 및 stainless steel의 표면에 따른 차이는 일관된 경향을 나타내지 않았다. E. coli와 P. aeruginosa가 polyethylene 표면 에서 biofilm을 형성하는 능력은 stainless steel 표면에서 보다 유의적으로 높았다. 식중독 미생물은 표면에 균을 접종했을 때 바로 biofilm을 형성하였으며, E. coli, P. aeruginosa 및 S. Typhimurium은 접종 1시간 후에 모든 표면에서 biofilm을 형성하였다. Biofilm 형성 7일 후, S. aureus를 제외한 나머지 균주는 polyethylene과 stainless steel 표면에서 생존률에 차이가 없었다. 시험한 6종의 식중독 미생물의 경우 biofilm을 형성하는 능력은 균의 종류 및 polyethylene과 stainless steel 표면에 따라 다르게 나타났다.

본 연구는 기구등에 오염된 E. coli와 S. aureus를 제어 하기 위해 이산화염소의 농도별 접촉시간에 따른 살균소 독력을 평가하여 살균예측모델을 개발하였다. E. coli의 경우 초기균수가 9.13 log CFU/mL이었고, 청정조건에서 5 ppm으로 1분, 3분, 5분 처리한 결과 각각 0.04, 0.07, 0.10 log CFU/mL의 감소값을 나타내었다. 20 ppm을 처리한 결 과 각각 0.74, 0.79, 0.84 log CFU/mL의 감소값을 나타내었다. 또한 CCD에 의한 최대농도 35 ppm으로 처리한 결과 각각 2.49, 2.70, 3.65 log CFU/mL의 감소값을 나타내었다. S. aureus의 경우 초기균수가 8.70 log CFU/mL이었고, 청정조건에서 5 ppm으로 1분, 3분, 5분 처리한 결과 각각 0.14, 0.28, 0.36 log CFU/mL의 감소값을 나타내었다. 20 ppm을 처리한 결과 각각 0.66, 0.79, 0.90 log CFU/mL의 감소값을 나타내었다. 또한 CCD에 의한 최대농도 35 ppm 으로 처리한 결과 각각 4.59, 5.25, 5.81 log CFU/mL의 감소값을 나타내었다. 따라서 이산화염소의 살균소독력 평 가결과는 E. coli와 S. aureus에 대하여 식품의약품안전처 살균소독력 기준에 모두 만족하는 것으로 나타났다. 살균 예측모델의 경우, R2값이 모두 0.98 이상으로 두 균주에 대해 모두 높은 적합성을 보였다. 본 연구에서 개발된 이산화염소의 살균예측모델을 식품산업 적용을 위한 기초자 료로 활용함으로써 E. coli와 S. aureus를 적절한 농도와 접촉시간으로 제어할 수 있을 것으로 사료된다.

본 연구에서는 소수성 다공성 막의 투과 성능을 향상시키기 위하여 친수성 고분자를 염석법으로 코팅하였다. 코팅된 소수성 막의 코팅유무는 접촉각과 SEM을 이용하여 확인하였다. 막의 내구성을 향상시키기 위하여 Glutaric aldehyde(GA)를 이용하여 코팅용액과 함께 가교하였다. 가장 좋은 친수성 고분자로는 poly(styrere-sulfonic acid-co-maleic acid) (PSSA_MA)이었으며, 이를 이 용하여 코팅하였을 때 투과도 측면에서 80% 향상된 결과를 나타내었다. 또한 가장 좋은 코팅 조건은 코팅용액의 농도 150-300ppm, 이온세기는 0.15, 코팅시 간은 20분으로 도출되었다.

Biofouling is about of how marine organisms attach to marine substrata at different length and time scales. Anti-fouling is the process of removing the accumulation, or preventing their accumulation. Recently, many research groups in the world try to invent an anti-fouling agent via biomimicking processes. Naturally occurred antifouling materials and processes (i.e. calcareous algae that cause barren ground phenomenon, and periostracum of bivalves ) give us some insights to design novel anti-fouling agent via biomimicking. Here, I will present bio-inspired and environmentally friendly anti-fouling agents based on understanding marine fouling mechanisms.

본 연구에서는 다공성 소수성 막의 수투과도를 향상시키기 위해 다공성 소수성 막의 물 흐름을 향상시키기 위해 다양한 수용성 폴리머를 염석법을 이용하여 흡착시켰다. 막의 표면의 흡착 유무를 알기 위해 접촉각을 측정하였고 주사 전자 현미경(SEM) 사진을 이용하였다. PSSA_MA가 접촉각과 수투과도에서 가장 좋은 결과를 보였고 수투과도는 약 80% 향상된 것을 확인할 수 있었다. 코팅액이 저농도일 때 고농도일 때보다 더 친수화가 잘 되었는데 이는 코팅액이 고농도일 때 막 표면의 기공을 차단하기 때문이라고 사료된다. 최고의 코팅조건은 150ppm~300ppm의 농도일 때였으며, 이온세기는 0.15, 코팅시간은 20분 일 때였다.