본 연구는 토양 용토, 호르몬 종류 및 농도, 잎의 모양 차이 에 따른 넓은산꼬리풀의 삽목 발근을 확인하기 위하여 수행되 었다. 토양 용토는 단일 원예용상토와 녹소토 그리고 원예용 상토:녹소토(1:1) 혼합용토를 사용하였다. 호르몬 종류는 IBA 와 NAA를 사용했으며 각각 무처리, 100, 500, 1000㎎·L-1를 처리했다. 잎의 모양은 잎 두매가 온전하게 달린 삽수, 잎 두 매를 반으로 자른 삽수 그리고 잎 한매를 반으로 자른 삽수를 조제하여 사용했다. 용토에 따른 발근은 녹소토를 단일로 사 용한 처리에서 가장 우수하게 나타났으며 원예용상토를 단일 로 사용한 처리에서 발근이 저조하였다. 호르몬에 따른 발근 은 IBA와 NAA에 따라 큰 차이가 나타나지 않았으나, 생물의 biomass를 나타내는 건물중이 NAA 보다 IBA에서 높게 나 타난 것으로 보아 IBA가 더 효과적인 것으로 판단된다. 잎 모 양에 따른 발근은 잎 한장을 반으로 자른 삽수가 가장 높은 생육이 나타났으며 온전한 잎 두장이 붙어있는 처리는 생육이 가장 낮게 나타난 것을 확인할 수 있었다. 따라서 넓은산꼬리 풀은 삽목시 반으로 잘린 잎이 한장만 붙어있는 삽수를 저농 도의 IBA에 침지 후 녹소토에 꽂는 것이 삽목에 효과적일 것 으로 보여 진다.

The optimization of a prevention program utilizing a novel trivalent inactivated Salmonella bacterial vaccine to protect poultry from Salmonella infections was evaluated in this study. A total of 50 brown nick layers were divided into 5 groups, A to E, each containing 10 hens. Group B hens were immunized with the SG9R vaccine, group C chickens were immunized with the trivalent inactivated Salmonella bacterial vaccine, and group D hens were primed with SG9R and boosted with the trivalent inactivated Salmonella bacterial vaccine. Group E hens were injected with sterile PBS. All hens in groups B to E were orally challenged with a mixture of wild-type S. Enteritidis, S. Typhimurium, and S. Gallinarum (approximately 6×10⁹ CFU/ 0.2 ml/bird). Serum IgG titers, CD3+CD4+ T-cell levels, and CD3+CD8+ T-cell levels in group D were significantly higher than those in group A. Additionally, all animals in groups A to D showed no clinical symptoms and survived after the virulent challenges, whereas all chickens in group E died following the challenge. The challenge strains of S. Enteritidis, S. Typhimurium, and S. Gallinarum were not isolated from the liver, spleen, cecum, and cloaca of group D chickens. These findings indicate that priming with SG9R and boosting with a trivalent inactivated Salmonella bacterial vaccine can be an effective approach for preventing Salmonella infections by inducing robust protective humoral and cellular immune responses in chickens.

This study was conducted to develop a seed propagation protocol of Hemerocallis taxa native to the Korean Peninsula. In this study, the seed dormancy types were classified. The germination traits of H. thunbergii, H. dumortieri, H. hakuunensis, and H. hongdoensis were also characterized. The initial embryo to seed length ratio (E:S ratio) in seeds of the four Hemerocallis species was between 0.80 and 0.90 at harvest, however, the E:S ratio did not increase until just before germination. Thus, seeds of the four Hemerocallis species had no morphological dormancy (MD), and at least 84% of seeds of all tested species germinated at 25/15℃ under light within 30 days. The lower the incubation temperature, the lower the germination rate of seeds of the four Hemerocallis species. However, the temperature range for germination was expanded due to old stratification. Gibberellin treatment increased the germination rate or germination speed at a relatively low temperature of 15/6℃. However, this treatment did not improve the germination rate as much as the temperature at 25/15℃. Under 15/5℃ of incubation, cold stratification increased the final germination percentage and rate/speed and expanded the temperature range for germination from high to low (25/15℃ → 15/6℃). This indicates that the seeds have a conditional dormancy (CD) that germinates in a narrow temperature range. In conclusions, the four Hemerocallis seeds exhibited nondeep physiological dormancy.

Foot-and-mouth disease (FMD), which affects cloven-hoofed animals, is economically important because of its highly contagious nature. FMD virus (FMDV), the causative agent of FMD, involves seven serotypes (O, A, Asia1, C, and SAT 1-3). Serotype Asia1 is unique to the Asian territory and is subdivided into nine genetic groups (G-I-IX) based on nucleotide variations in the VP1 sequence. Asia1 Shamir, the most representative Asia1 vaccine, is not highly protective against the Asia1/MOG/05 (G-V) lineage found in North Korea in 2007. Therefore, we investigated whether a chimeric virus strain (Asia1/MOG/Shamir), in which the VP4, VP2, and VP3 sequences of Asia1/MOG/05 were combined with the VP1 sequence of Asia1 Shamir, can simultaneously protect against both viruses. We determined the optimal viral growth conditions for the commercial utilization of this chimeric virus strain. Of the three types of cell culture media, the Cellvento medium resulted in the highest amount of antigen in the samples. The chimeric strain was proliferated in a small bioreactor to produce a test vaccine, and its immunogenicity was evaluated in pigs. The virus neutralization (VN) titer against the Asia1 Shamir virus was > 1/100 after the second immunization with the chimeric vaccine in pigs. In addition, a single dose of the test vaccine resulted in a VN titer of > 1/100 against the Asia1/MOG/05 strain. Taken together, our chimeric vaccine strain provided sufficient protection against the Asia1/MOG/05 and Asia1 Shamir viruses, suggesting its potential as a novel vaccine for both these strains.

나노에멀젼이란 20 ~ 200㎚ 정도의 입자 크기를 갖는 에멀젼으로 투명하거나 반투명한 외 관을 가지며, 작은 입자 사이즈로 유효물질의 피부 투과율을 향상시킬 수 있다는 장점이 있어 다양한 분야에서 응용되고 있다. 본 연구에서는 오일의 required HLB와 종류가 나노에멀젼 형성에 미치는 영향 에 대하여 알아보기 위해 required HLB가 다른 오일 8가지, 종류가 다른 16가지의 오일을 선정하여 연 구를 진행하였다. 이때 사용한 계면활성제로는 Polysorbate 60 (HLB 14.9), Sorbitan stearate (HLB 4.7), PEG-60 hydrogenated castor oil (HLB 14.0)이며 Polysorbate 60과 Sorbitan stearate를 혼합하여 HLB 14.0으로 고정한 것과 Polysorbate 60, PEG-60 hydrogenated castor oil을 각각 사용하여 제조하 였다. 오일의 종류에 따라 나노에멀젼 형성이 다르게 나타났으며 에스터계 구조를 가지는 오일이 비교적 우수한 나노에멀젼 형성 능력을 보여주었는데, 특히 Cetyl ethylhexanoin이 평균 40㎚ 이하의 작은 사이 즈로 생성된 후 큰 변화없이 안정한 나노에멀젼이 형성된 것을 확인할 수 있었다. 또한, Polysorbate 60 과 Sorbitan stearate를 혼합하여 사용하는 것이 PEG-60 hydrogenated castor oil 혹은 Polysorbate 60 각각 단독으로 사용하는 것보다 우수한 나노에멀젼 형성 능력을 가지는 것으로 나타났다.

This study investigates the enhancement of surface precision and dimensional accuracy in STS 316L oval pipes through the application of magnetic abrasive finishing. The experiment involves the modification magnetic pole shapes(A, B, C, D) and a comprehensive analysis of their impact on surface quality. Key parameters include magnetic abrasive KX#320, iron powder, aluminum oxide, light oil, a test specimen rotating at 600rpm, and periodic injection of polishing liquid, a permanent magnet Nd-Fe-B, and magnetic pole steel 1018, reciprocating distance 20mm, and a feed rate 1mm/sec over a 32minutes duration with measurements every 4minutes. The results demonstrate significant variations in surface quality based on magnetic pole shape, with specific configurations demonstrating superior precision and smoothness from the initial surface 0.32μm to 0.06μm.

본 연구는 만성질환으로 외래서비스를 이용하는 환자를 대상으로 의 료기관 유형별 의료서비스 이용 경험을 조사하고, 만성질환자의 건강 결과를 실증적으로 비교 분석하여, 만성질환 관리의 효과적인 중재방안 마련에 기초자료를 제공하고자 시도되었다. 본 연구의 자료수집은 2023년 7월 1일부터 7월 31일까지 고혈압과 당뇨병 진단으로 보건소 와 의원, 종합병원의 외래서비스를 이용하고 있는 대상자 167명에게 면담을 통한 구조화된 설문지를 작성하여 자료를 수집하였고, 수집된 자료는 SPSS 통계프로그램을 이용하여 분석하였다. 연구 결과 고령의 취약계층은 의료기관 중 의원을 가장 많이 이용하고 있었고, 의료기관 유형별 이용경험의 결과는 의원이 가장 부정적이었다. 그러나 만성질환 관련 건강 결과는 의료기관 유형별로 유의한 차이가 없었다. 그러므로 보건소는 특히 취약계층 환자들의 보건의료 요구를 중시하고 공공보건 서비스를 효율적으로 제공해야 하며, 의원의 만성질환 관리 역량의 강 화를 위한 다양한 중재 방안 마련과 함께 국가 시범사업의 적극적 참 여를 유도할 수 있는 정책이 수립되어야 할 것이다.

본 연구에서는 운전 시뮬레이션을 사용하여 자율주행 환경을 구현한 후 3-수준 자율주행 조건에서 자율주행 차량 (automated vehicle: AV)으로부터 운전자에게 전달되는 제어권 인수 요구(takeover request: TOR) 정보의 양상(시각, 청각 및 시각+청각) 및 도로 형태(직선도로와 곡선도로)에 따라 운전자의 제어권 인수 시간(takeover time: TOT) 및 정신적 작업부하(제어권 인수 이후에 운전자들이 경험한 주관적 작업부하와 심장박동수에서의 변화)가 어떻게 차별 화되는지 분석하였다. 본 연구의 결과를 요약하면 다음과 같다. 먼저, AV로부터 TOR이 제시된 이후 실험참가자들 이 보인 TOT에 대한 분석 결과, TOR 정보양상의 측면에서는 시각 정보가 가장 빠른 TOT를 이끌어 낸 반면 청각 정보 조건에서 가장 느렸고, 도로 형태 측면에서는 직선도로 조건에 비해 곡선도로 조건에서의 TOT가 유의하게 더 느렸으며, 특히 청각 정보 조건에서 도로 형태에 따른 TOT에서의 차이가 가장 컸다. 둘째, 정신적 작업부하에 대한 분석 결과, TOR 정보가 시각 혹은 시각+청각적으로 제시된 조건에 비해 청각적으로 제시된 조건에서 주관적 작업부 하 측정치와 심장박동수 변화 크기 모두 전반적으로 더 낮았고 특히, 심장박동수 변화의 경우 이러한 경향은 곡선도 로 조건에서만 관찰되었다. 이러한 결과는 TOR 정보의 양상과 도로 형태에 따라 운전자의 TOT와 정신적 작업부하 수준이 달라질 수 있고, 특히 TOT가 빠를수록 정신적 작업부하 수준은 상대적으로 더 높아질 수 있음을 시사한다.

This study evaluated the consumers’ demands and points of improvement for restaurant meal replacement through importance–performance analysis by the restaurant meal replacement segment market using food involvement. The results were as follows. First, after segmenting the restaurant meal replacement market using food involvement, it was classified into three markets (multiple involvements, exploration-oriented, and product quality-oriented). Second, an analysis of the importance of restaurant meal replacement selection attributes revealed taste, sanitation, quality, freshness, price, saving time, texture, ingredients, preparation process, and quantity to be highly important. An analysis of the differences according to the market type revealed the multiple involvement type to be more important than other groups, considering the restaurant meal replacement selection attribute element. Third, an analysis of the importance-performance analysis of restaurant meal replacement selection attributes revealed that quantity and price as the selection attributes that needed to be improved first in all three markets. In addition, in the multiple involvement type, food additives appeared as a selection attribute requiring priority improvement, revealing the characteristics of a market that cares about diet and health.

PURPOSES : Evaluation of the effectiveness of changing the form of yellow carpet installation as a way to reduce child pedestrian traffic accidents. METHODS : Through expert opinion, two improvement plans for yellow carpet installation (oblique type, extended type) were derived. The improvement paln was built in virtual reality, and a virtual driving experiment was performed using a driving simulator and eye-trakcing device. The improvement effects of the two alternatives were evaluated by analyzing eye-tracking data and driving behavior. RESULTS : In the case of the oblique type, it was analyzed that it was effective in improving the total gaze time and first gaze position compared to the normal type. In the case of the extended type, it was analyzed that the workload during operation can be reduced. However, neither of them had a significant effect on driving behavior. CONCLUSIONS : Although the change in the yellow carpet installation type did not affect the driver's driving behavior, it had advantages in terms of visual behavior and workload while driving, so it can be considered as an alternative among measures to improve traffic accidents involving children and pedestrians.

PURPOSES : The wedge-type anchorage system requires a complex analysis of not only the tensile stress of the CFRP plate, but also the compressive stress and shear stress generated by the wedge action. The purpose of this study is to find a composite material failure theory that is suitable for analyzing the behavior of wedge-type anchorage system among various failure theories. METHODS : In this study, numerical analysis of various composite material failure theories was performed to analyze the anchorage strength and failure mode of the wedge-type anchorage system according to each failure theory, and compared with actual test results to determine the composite material failure theory most suitable for analyzing the behavior of a wedge-type anchorage system. RESULTS : Since the Maximum Stress failure theory shows similar results to the actual test in terms of failure mode and anchorage strength, there is no significant problem in applying it to the wedge-type anchorage system. However, it is judged to be difficult to apply under property conditions where interactions between stresses are highlighted. The Tsai-Hill and Tsai-Wu failure theories are considered unsuitable for application to wedge-type anchorage systems because the wedge angle conditions at which the most advantageous anchorage strength occurs are significantly different from other theories and the fracture type cannot be predicted. The Hashin-Rotem failure theory is considered to be the most appropriate to apply as a failure theory for the wedge-shaped anchorage system because the anchorage strength was slightly lower than the actual test results, but there was no significant difference, and the failure mode was consistent with the test results. The Hashin failure theory is judged to be unsuitable for application as a failure theory for the wedge-type anchorage system because the anchorage strength and failure mode were interpreted differently from the actual test results. CONCLUSIONS : The Hashin-Rotem failure theory was presented as the composite material failure theory most suitable for analyzing the behavior of wedge-type anchorage system.

본 연구의 목적은 노인장기요양보험법 관련 시설에 종사하는 요양보호사의 직무만족도와 자기효능감, 그리고 근무안정성과 의 관계를 고찰하는 것이며 특히 관련 시설 중 노인요양시설과 재가노인복지시설을 대표하는 주야간보호센터를 비교 분석하고 자 한다. 노인장기요양보험법 관련 시설 요양보호사의 근무안 정성을 제고하기 위하여 요양보호사의 전문성 향상 및 고용에 대한 안정성을 확보하기 위한 방안을 마련할 수 있는 구체적인 운영전략을 제시하고자 한다. 이를 위해 노인장기요양보험 관 련 시설별 요양보호사의 직무만족도와 근무안정성과의 관계에 서 자기효능감의 조절효과를 분석하기 위해 서울시 소재 노인 요양시설과 재가노인복지시설에서 근무하는 요양보호사 810명 을 대상으로 자기 기입식 설문조사를 실시하였다. 수집된 자료 를 기술통계, 상관관계분석 및 위계적 회귀분석을 실시한 결과 다음과 같은 결론이 도출되었다. 첫째, 노인요양시설의 경우 학 력, 직무만족도가 근무안정성에 영향을 미친 것으로 나타났으 므로, 학력별 근무안정성을 높이기 위한 노력과 직무만족도가 낮은 요양보호사들을 대상으로 근무안정성을 향상시키기 위한 개입 노력이 필요하다. 둘째, 재가노인복지시설과 노인요양시설 모두 직무만족도는 근무안정성에 정적인 영향을 미친 것으로 나타났으므로, 요양보호사의 근무안정성을 높이기 위해서는 직 무만족도를 향상시켜야 한다. 셋째, 시설 유형별 요양보호사의 직무만족도와 근무안정성과의 관계에서 자기효능감의 조절효과 가 나타났으므로 자기효능감을 향상시키기 위한 프로그램이 필 요하다. 본 연구의 결론을 토대로 노인장기요양 관련 시설별 요양보 호사들의 근무안정성을 높이기 위해 직무만족도 수준의 향상과 자기효능감을 증진하기 위한 실천적방안을 제언하였다.

Asphalt concrete, which is used as a road base material, accounts for >90% of a road pavement. A huge amount of waste concrete and waste asphalt concrete aggregates are generated. Recently, carbon neutrality is promoted across all industries for sustainability. Therefore, to achieve carbon neutrality in the asphalt concrete industry, waste asphalt concrete aggregates should be recycled. Additionally, road base materials are prepared using additives to ensure structural stability, durability, and economic efficiency. In this study, recycled asphalt concrete aggregates were used to evaluate the physical properties of road base materials according to the type of polymer additive and mixing method, and the applicability of road base each material was evaluated. Results showed that when the acrylate-based polymer additive was mixed, the uniaxial compressive strength was 30% higher. Furthermore, the compressive strength of the split mix was improved by ~29% compared to the total mix.

As the demand for p-type semiconductors increases, much effort is being put into developing new p-type materials. This demand has led to the development of novel new p-type semiconductors that go beyond existing p-type semiconductors. Copper iodide (CuI) has recently received much attention due to its wide band gap, excellent optical and electrical properties, and low temperature synthesis. However, there are limits to its use as a semiconductor material for thin film transistor devices due to the uncontrolled generation of copper vacancies and excessive hole doping. In this work, p-type CuI semiconductors were fabricated using the chemical vapor deposition (CVD) process for thin-film transistor (TFT) applications. The vacuum process has advantages over conventional solution processes, including conformal coating, large area uniformity, easy thickness control and so on. CuI thin films were fabricated at various deposition temperatures from 150 to 250 °C The surface roughness root mean square (RMS) value, which is related to carrier transport, decreases with increasing deposition temperature. Hall effect measurements showed that all fabricated CuI films had p-type behavior and that the Hall mobility decreased with increasing deposition temperature. The CuI TFTs showed no clear on/off because of the high concentration of carriers. By adopting a Zn capping layer, carrier concentrations decreased, leading to clear on and off behavior. Finally, stability tests of the PBS and NBS showed a threshold voltage shift within ±1 V.

본 연구의 목적은 비만 남자고등학생의 교복바지에 대한 착용만족도를 높이고 맞음새가 좋은 교복바지의 패턴개발을 위한 자료를 제공하는 데 있다. 이 연구는 사이즈코리아(2015)의 직접 측정 데이터 중 BMI 지수가 18.5이상인 17~19세 남자 745명의 데이터를 분석 자료로 활용하였다. 비만 남자고등학생의 체형분류를 위하여 표준체형과의 신체치수 비교를 위해 기술통계를 실시하였으며, 비만 남자고등학생의 체형분류를 위한 요인분석, 군집분석, 분산분석 등의 통계방법이 사용되었다. 그 결과, 비 만 남자고등학생의 체형분류 요인으로는 하반신 부피요인, 하반신 길이 요인, 복부 부피요인, 밑위 길이요인의 4개 요인이 도출되었다. 또 군집 분석의 결과로 4가지의 비만체형 유형이 분류되었다. 유형1은 분류된 비만체형 유형 중 하반신의 길이가 가장 짧고 왜소한 비만체형이며 유 형2는 비만 유형 중 허리둘레가 가늘고 복부의 부피가 작아 약간 왜소 한 비만체형이다. 유형3은 하반신 길이는 보통 이상이며, 하지와 하반 신 둘레, 복부의 부피 등의 모든 항목에서 가장 큰 값을 보여 부피가 큰 고도 비만체형이다. 유형4는 4가지 비만 유형 중 하반신 길이는 가 장 길고, 복부의 비만 정도가 유독 큰 복부 비만체형으로 정의할 수 있으며, 비만 체형의 특징을 반영한 교복바지의 설계방법에 대한 후속 연구가 진행될 예정이다.

The radioactive waste generated within radiation-controlled areas is classified and processed according to relevant laws and regulations based on contamination levels. In cases where such radioactive waste complies with the legally defined clearance concentration or dose criteria, it is disposed of as non-radioactive waste by means of incineration, reclamation, recycling, etc. Within radiation controlled areas, various consumables are periodically replaced to ensure the proper operation of the area. It is necessary to have appropriate disposal methods for these consumables. In particular, waste items such as fire extinguishers, fluorescent lamps, batteries, and pressure vessels (hereinafter referred to as “Special Waste Type”), which may contain hazardous substances within their internal components and contents, should be considered for appropriate disposal methods that comply with nuclear safety and environmental laws. In the present case, the specified special waste type do not come into direct contact with radiation sources, and they have impermeable surfaces, which significantly reduces the risk of external contamination infiltrating the interior. However, the current method of clearance is not suitable for these items (Typically, nuclear energy-related business operators are required to classify clearance target waste based on internal and external components and demonstrate compliance with the criteria. Nevertheless, for special waste type, it is difficult to separate and measure internal and external components within the radiation-controlled area). In this case, the Clearance Procedure for special waste type applied to Korea Atomic Energy Research Institute was introduced. Additionally, we have extracted considerations for future domestic clearance of the type.