검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 379

        43.
        2019.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        기존 내진보강시스템의 문제점을 개선하기 위한 듀얼프레임형 내진보강시스템은 기존구조체, 외부보강체, 댐퍼로 구성된다. 듀얼시스템은 지진발생시 주기차이로 인하여 기존구조체와 외부보강체 사이에서 상대변형이 발생되고 이를 댐퍼가 대응하여 안정적으로 지진에너지를 흡수하여 내진성능을 확보한다. 본 논문에서는 듀얼시스템의 구조성능을 분석하기 위하여 정적반복가력실험을 수행한다. 실험결과, 듀얼시스템 실험체는 비보강 실험체와 유사한 손상상태를 나타내었다. 이와 같이 나타난 이유는 정적실험 시 기존구조체를 강제 이력 시켰기 때문이다. 하지만 하중-변형관계곡선에서 핀칭현상이 완화되는 것으로 나타났고, 안정적인 이력거동을 통하여 비보강 실험체에 비해 5.3배 더 많은 에너지를 흡수하였다. 또한 동일한 층간변형각 및 누적 변형에 대해서도 더 많은 에너지를 흡수할 수 있음에 따라 듀얼시스템을 적용할 경우 내진성능을 향상시킬 것으로 판단된다. 또한 듀얼시스템을 실무에 적용하기 위해서는 설계프로세스 등에 대한 연구가 필요하며, 본 논문을 추후 연구의 기초자료로 제시하고자 한다.
        4,000원
        46.
        2019.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        기존 콘크리트 구조물에 대한 효과적인 내진보강 개발을 위하여 아라미드 FRP 보강 기둥 및 SRF 공법을 사용한 폴리에스테르 보강 RC기둥의 구조실험을 수행하였다. 실험 변수는 아라미드 시트의 두께와 스트립 보강 유무, 그리고 SRF공법 폴리에스테르 벨트의 두께이다. 실험결과는 무보강 실험체와 보강 실험체의 강도와 에너지 소산능력을 비교하여 평가하였다. 실험 결과 아라미드 섬유 보강과 SRF공법 보강이 RC기둥의 내진성능 향상에 효과적임을 확인하였다.
        4,000원
        47.
        2018.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        배양액의 종류 및 LED를 이용한 다양한 광질 조건이 물냉이의 생장과 glucosinolates 함량에 미치는 영향을 3주간의 수경재배를 통하여 살펴보았다. 물냉이 종자를 암면배지에 파종 후 발아시켜, 2주간 육묘하였다. 유묘들은 semi-DFT 시스템에 이식하였다. 환경조절실은 주간온도 20±1℃와 야간온도 16±1℃, 주간습도 65±10%와 야간습도 75±10%의 범위에서 조절되었으며 16/8h 조건의 광주기와 180±10μmol·m-2·s-1 광강도를 유지하였다. 배양액은 오오츠카 하우스 1A(OTS), 한국원시(HES)과 화란온실작물연구소(PBG) 배양액을 초기 EC 1.0-1.3, pH 6.2와 형광등을 광원으로 실험하였다(실험-1). 광질에 대한 생육과 glucosinolates 함량을 분석하기 위하여 단색광(적색: R10, 백색: W10) 처리구와 혼합광(적청녹색: R2B1G1, 백청녹색: W2B1G1, 적색: R10, 적청색: R5B1, 적청색: R3B1)처리구를 두었다. 물냉이 지상부의 생육은 3개의 배양액 처리구에서 유의적인 차이가 발견되지 않았지만, 뿌리의 생체중은 HES와 비교하여 PBG와 OTS에서 13.7%와 55.1% 증가하였다. OTS 처리는 PBG와 HES 처리구에 비해 gluconasturtiin 함량이 96%, 65% 증가하였다. 백색광조건(W10)과 비교하여 적색광(R10) 처리는 초장이 101.3% 증가하였다. 청색광 비율의 증가는 지상부 생육에 긍정적인 영향을 주었다. 물냉이의 건물중 당 glucosinolates 함량은 R2B1G1 처리구와 비교하여 R3B1 처리구에서 144.5% 증가하였으며, W10 처리구와 비교 시, 약 70% 증가하는 경향을 보였다. R3B1 처리구에서 물냉이의 생육과 총 glucosinolates의 함량이 가장 높게 나타났다.
        4,000원
        49.
        2018.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Potato cultivation area in Kazakhstan has been steadily increasing for ten years from 154,000 ha in 2006 to 186,000 ha in 2016. The production amounts are also increasing from 2,360,000 tons in 2006 to 3,550,000 tons in 2016. The average yield(/ha) was 19.0 ton in 2016 while 15.4 tons in 2006. The import volume increased by about 3.2 folds for seven years from 34,874 tons in 2006 to 112,323 tons in 2013. The import price(/ton) has been also showing steady increasing from $180(USD) in 2006 to $202(USD) in 2013. The export volume dramatically increased from 73 tons in 2006 to 8,455 tons in 2013. It shows that the potato trade with neighboring countries is very active recently. Kazakhstan need seed potato of around 700,000 tons each year, which is more than the total production yield (600,000 tons/ year) of Korean potato. Seed potatoes are imported from Europe by the private seed companies and then distributed to farmers after multiplications for two or three years. Potatoes are sown in May and harvested in September or October, which is similar to the summer cropping in Korean potato. The European cultivars such as ‘Sante’ and ‘Rodeo’ are preferred broadly due to their high temperature resistance, salt tolerance, long dormancy period, and yellow flesh color. Meanwhile, Early blight and Colorado potato beetle are known as the main problems at Kazakhstan potato fields. The big yield loss by insects or diseases during storage is one of the severe problems too. Considering the internal and external circumstances of Kazakhstan potato, it is expected that the Korea's high-quality seed potatoes and the post-harvest management technologies could be helpful to enter the Kazakhstan potato market effectively as well as to increase the market competitiveness.
        4,000원
        51.
        2018.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This review summarizes the history of freshwater zooplankton research in Korean Society of Limnology and necessary future topics that are remain poorly investigated in South Korea based on main research topics of published articles focusing on lakes, reservoirs, rivers and wetland ecosystems. In Korea, a total 450 freshwater zooplankton species have been reported (85 species of cladocera, ca. 230 species of rotifera since 1939, and 138 species of copepoda), and they cover 10% of total zooplankton species list. In the present paper, we provide recent species list of zooplankton found in Korea and their taxonomic keys. Over periods of 45 years, there are 25 published papers for zooplankton biota in lentic ecosystems in Korean Journal of Ecology and Environment (KJEE). The ecology of zooplankton communities in rivers has focused on the mechanisms involved in regulating their abundance, diversity and spatio-temporal patterns of genus Bosmina and rotifers (genus Brachionus and Keratella) that are most frequently found from Korea. On the other hand, the studies on zooplankton in wetland has focused on Alona, Chydorus and Ceriodaphnia with special emphasis on their relationships with aquatic macrophytes. Even though studies on the freshwater ecosystem in Korea have a long history, a few of studies on zooplankton biota were conducted at rice paddy, Dumbeong and wetlands. During the last two decades, experimental advances in freshwater zooplankton ecology and understanding of structure and function of this biota were made from a series of articles mainly in journal of KJEE. For future studies, quantitative, experimental and interdisciplinary approaches would be key words to understand zooplankton ecology and their roles in aquatic ecosystems under changing environments, and we have suggested necessary zooplankton research fields and future directions.
        5,500원
        52.
        2017.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The objective of this experiment was to determine the effect of supplementation of hot melt extrusion (HME) processed Zn sulfate on growth performance, nutrients digestibility, small intestinal morphology and excretion of Zn in weanling pigs. A total of 200 piglets of mixed sex randomly allotted to four treatments on the basis of initial BW (7.15±0.81 kg). There were five replicates in each treatment with 10 pigs per replicate. The experimental treatments consisted of: 1) basal diet containing ZnSO4; 2) basal diet containing Zn-Methionine (ZnMet); 3) basal diet containing low level of nano-Zn as HME (ZnHME50); 4) basal diet containing medium level of nano-Zn as HME ZnSO4 (Zn-HME75). The average daily gain was improved by the ZnMet and ZnHME75 compared with the pigs fed ZnSO4 supplemented diets (p=0.009). Moreover, ZnHME75 and ZnMet affected on the ATTD of CP during phase 2 (p=0.014). The villus height (VH) was affected by increasing when pigs fed diets supplemented the ZnHME75 (P=0.044). The pigs fed diets supplemented ZnHME50 had significantly the lowest (p=0.037) Zn content in liver compared with other treatments. The Zn content in the feces was significantly higher (p<0.001) in ZnSO4 and ZnMet compared with ZnHME50 or ZnHME75. In conclusion, it could be concluded that dietary Zn can be reduced by 25% with ZnHME without any detrimental effect on performance of weanling pigs.
        4,200원
        53.
        2017.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Nanosized Gd2O3:Eu3+ red phosphor is prepared using a template method from metal salt impregnated into a crystalline cellulose and is dispersed using a bead mill wet process. The driving force of the surface coating between Gd2O3:Eu3+ and mica is induced by the Coulomb force. The red phosphor nanosol is effectively coated on mica flakes by the electrostatic interaction between positively charged Gd2O3:Eu3+ and negatively charged mica above pH 6. To prepare Gd2O3:Eu3+-coated mica (Gd2O3:Eu/mica), the coating conditions are optimized, including the stirring temperature, pH, calcination temperature, and coating amount (wt%) of Gd2O3:Eu3+. In spite of the low luminescence of the Gd2O3:Eu/mica, the luminescent property is recovered after calcination above 600℃ and is enhanced by increasing the Gd2O3:Eu3+ coating amount. The Gd2O3:Eu/mica is characterized using X-ray diffraction, field emission scanning electron microscopy, zeta potential measurements, and fluorescence spectrometer analysis.
        4,000원
        54.
        2017.11 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The age and growth of pointhead flounder, Hippoglossoides pinetorum caught by gill nets was analyzed in this study from March 2015 to July 2017. New annuli were formed in H. pinetorum otoliths annually, and the boundary was set between the opaque and translucent zones from March and April. The relationships between total length (TL) and body weight (BW) were BW = 0.0025 TL3.409 (r2 = 0.9551) for females and BW = 0.0057 TL3.138 (r2 = 0.9163) for males. In this study, the ring of pointhead flounder, H. pinetorum was formed between 3 and 8 for females and between 3 and 6 for males. Total length (TL) and otolith radius (OR) were measured as follows: TL = 7.142 OR + 0.769 (r2 = 0.793) for females and TL = 6.498 OR + 1.706 (r2 = 0.652) for males. The mean distances of first ring (r1) were 0.92 mm and 0.91 mm for females and males respectively. The TLs at the time of annulus formation, back-calculated from the otolith-length relationship by reference to the von Bertalanffy growth curves, were Lt = 43.59 (1-e-0.15(t+0.007)) for females and Lt = 28.13 (1-e-0.26(t+0.006)) for males while the growth between female and male was different.
        4,500원
        56.
        2017.10 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        Gd2O3:Eu3+ red phosphors were prepared by template method from crystalline cellulose impregnated by metal salt. The crystallite size and photoluminescence(PL) property of Gd2O3:Eu3+ red phosphors were controlled by varying the calcination temperature and Eu3+ mol ratio. The nano dispersion of Gd2O3:Eu3+ was also conducted with a bead mill wet process. Dependent on the time of bead milling, Gd2O3:Eu3+ nanosol of around 100 nm (median particle size : D50) was produced. As the bead milling process proceeded, the luminescent efficiency decreased due to the low crystallinity of the Gd2O3:Eu3+ nanoparticles. In spite of the low PL property of Gd2O3:Eu3+ nanosol, it was observed that the photoluminescent property was recovered after re-calcination. In addition, in the dispersed nanosol treated at 85 oC, a self assembly phenomenon between particles appeared, and the particles changed from spherical to rod-shaped. These results indicate that particle growth occurs due to mutual assembly of Gd(OH)3 particles, which is the hydration of Gd2O3 particles, in aqueous solvent at 85 oC.
        4,000원
        57.
        2017.10 구독 인증기관·개인회원 무료
        아스팔트 혼합물이 운반·대기 중에 단기노화(short-term aging: STA)되는 것은 잘 알려진 사실이며 노화정도는 혼합물의 온도가 높음에 따라 그리고 시간이 길어짐에 따라 지수 함수적으로 증가되는 것으로 알려져 있다. 또한 같은 온도와 시간에 같은 바인더, 골재 및 입도를 사용한 같은 혼합물이라도 사용되는 첨가제의 종류에 따라 노화도에 차이가 난다. 그리고 혼합물의 종류에 따라서도 노화도에 차이가 큰 것으로 알려져 있다. 따라서 본 연구에서는 박리방지제(anti-stripping agent: ASA)의 종류와 혼합물의 종류에 따른 노화도의 차이를 비교분석 하였다. ASA로는 박리방지효과가 우수한 분말의 소석회와 액상 ASA를 비교하였다. 혼합물은 밀입도 아스팔트 (dense-graded asphalt: DGA) 표층용 혼합물과 쇄석 매스틱 아스팔트 (stone mastic asphalt: SMA) 혼합물을 비교하였다. 노화도는 아스팔트 노화의 척도로는 가장 많이 쓰이는 절대점도(absolute viscosity: AV)를 이용하였다. STA 온도와 시간에 따른 AV의 차이를 STA 처리된 혼합물로부터 추출·회수하여 60℃에서 측정하였다. 시험결과 같은 온도와 시간으로 STA 처리된 혼합물에서 소석회가 사용된 혼합물의 노화도가 월등히 낮았으며, 혼합물의 종류로는 SMA 혼합물의 노화도가 DGA 혼합물보다 낮게 나타났다. 이는 소석회가 박리방지효과 뿐만 아니라 노화억제 효과가 크기 때문이며, SMA는 바인더 함량이 높아 골재를 피복한 아스팔트 필름의 두께가 두꺼워 노화도가 적게 나타난 것으로 판단되었다.
        58.
        2017.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        대마[Cannabis sativa L.]는 오랫동안 섬유작물로 재배되었지만 종실의 기름 함량이 많고 불포 화지방산 비율이 높아 식용유 원료작물로 유망하다. 오랫동안 대마 종실유를 이용해온 유럽의 여러 나라에 서는 압출식으로 착유하는데, 이용 역사가 짧은 우리나라에서는 대마 종실유에 대한 정보 부족으로 소비자 기호도가 낮은 편이다. 본 연구는 압착식과 압출식으로 착유한 대마 종실유의 성분을 분석하여 소비자들에 게 올바른 정보를 제공하기 위해 수행하였다. 압출식 착유기로 착유하면 착유량이 압착식에 비해 많았다. 착유 부산물인 유박은 압출식에서는 으깨어져 얇고 납작하게 배출되지만, 압착식은 종실이 다소 납작해졌 으나 종실의 형상을 유지하였다. 압출식 착유 종실유는 압착식에 비해 Chlorophyll A, B 및 Carotenoid 함 량이 높아 명도(L)는 낮고 녹색과 황색은 진하였다. 지방산 조성에서 Palmitic acid, Stearic acid, Oleic aicid, γ-Linolenic acid 비율은 압출식 착유 종실유가 압착식에 비해 다소 높았으나, Linoleic acid와 α -Linolenic acid는 낮았다. 대마 종실유는 총 토코페롤 함량이 많고 그 중 γ-Tocopherol 함량이 많은 것 이 특징이었는데 압출식 착유 종실유가 압착식에 비해 다소 적었다.
        4,000원
        59.
        2017.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The purpose of this study was to optimize dough properties using response surface methodology (RSM) and to demonstrate the performances of dough prepared under optimized conditions. Dough mixed with yeast, margarine, salt, sugar and wheat flour was prepared by fermentation process. Hardness, cohesiveness and springiness of dough were selected as critical quality attributes. The critical formulations (yeast and water) and process (fermentation time) variables were selected as critical input variables based on preliminary experiment. Box-Behnken design (BBD) was used as RSM. As a result, the quardratic, the squared and the linear model respectively provided the most appropriate fit (R2>90) and had no significant lack of fit (p>0.05) on critical quality attributes (hardness, cohesiveness and springiness). The accurate prediction of dough characteristics was possible from the selected models. It was confirmed by validation that a good correlation was obtained between the actual and predicted values. In conclusion, the methodologies using RSM in this study might be applicable to the optimization of fermented foods containing various wheat flour and yeast.
        4,000원
        60.
        2017.05 구독 인증기관·개인회원 무료
        증류에 의한 올레핀/파라핀 분리는 끓는점이 유사하여 에너지 소모가 높기 때문에, 분리막을 이용한 연구가 많이 진행 중이다. 특히 CMS 분리막은 sieving separation에 의한 투과/분리 성능이 우수하다. 따라서 본 연구에서는 중공사형 α-alumina 지지체에 γ-alumina 중간층을 형성한 후 Matrimid로 코팅하여 열분해함으로써 높은 기계적 강도와 충진 밀도를 갖는 중공사형 CMS 복합막을 제조하였다. 제조된 CMS 분리막은 20 - 35 GPU 프로필렌 투과도와 10 이상의 프로필렌/프로판 분리도를 보였다. 이 연구는 2014년 정부(미래창조과학부)의 재원으로 국가과학 기술연구회 융합연구단 사업(No. CRC-14-01-KRICT)의 지원을 받아 수행된 연구입니다.
        1 2 3 4 5