In the mid-eastern part of the Yellow Sea, large-scale shelf ridges originated from erosion on sand-mud successions that have been presently eroded by strong tidal currents. A three-layered in situ geoacoustic model is provided down to 50 m for the subbottom sedimentary succession of a 45 m water depth using the Hamilton method. The succession is divisible into two-type units of Type-A and Type-B using high-resolution seismic profiles with a deep-drilled YSDP-104 core of 44.0 m in depth below the seafloor. Type-A unit mainly comprises sandy or gravelly sediments, whereas Type-B unit mostly consists of tidal muddy sediments with some thinner sand beds. P-wave speed values are positively compatible with the mean grain size and sediment type of the core sediments. For actual modeling, the geoacoustic property values of the models were compensated to in situ depth values below the seafloor. The detailed geoacoustic model contributes to simulating sound transmission through the sedimentary successions in erosional shelf ridges of variable geoacoustic properties distributed in shallow-water environments of the mid-eastern Yellow Sea.

한강 3개 보 구간 수변부 11개 지점을 대상으로 2023년 총 2회 채집된 저서성 대형무척추동물은 총 100종 평균 426.0 개체/m2였다. 여주보에서 64종으로 가장 많이 출현하였고, 강천보에서 59종, 이포보에서 54종, 한강보상류 에서 41종, 한강보하류에서 32종이 확인되었다. 전체 평균 개체밀도는 강천보에서 944.1 개체/m2로 가장 많았고, 한강보상류에서 282.7 개체/m2, 여주보에서 251.9 개체/m2, 이포보에서 180.6 개체/m2, 한강보하류에서 172.9 개체 /m2 순으로 확인되었다. 한강 보 구간에서는 플라나리아류, 실지렁이, 깔따구류 등이 우점함. 보구간의 특성상 상대적으로 단순한 하상 및 깊은 수심에 적응성이 높은 실지렁이, 깔따구류의 우점은 일반적인 특성으로 볼 수 있으며 일시적으로 수변부에서 밀집된 플라나리아류의 채집이 이뤄져 우점된 결과를 보인 것으로 보임. 한강 보 구간 수변부 및 중앙부 조사지점별 군집분석을 실시한 결과 한강보 하류는 3개 보에 비해 우점도가 높고 다양도 와 풍부도가 낮았으며 전반적으로 상류부에 위치한 한강보상류 등의 지점에서 군집안정성이 확보되고 있는 것으로 보이며 이러한 점은 상대적으로 다양한 미소서식환경에 기인한 것으로 판단된다.

Abstract Purpose : This study investigated the impact of knowledge and awareness of perception of harmful rays on the use of blue light blocking lenses among university students majoring in optometry. Methods : This study targeted 65 optometry students who responded to an online survey from September 2023 to October 2023. The survey used a survey tool with a total of 15 questions, including knowledge and awareness of perception of harmful rays and demands for guidelines. Statistical analysis was performed using SPSS 19.0. Results : The overall knowledge score about UV rays and blue light was 14.00±3.10 for optometry students and 12.30±3.50 for general university students, showing that the optometry students had higher knowledge (p<0.001). In the case of use of UV-blocking lenses, 70.8% of optometry students were found to be using them, which was higher than 51.5% of general university students. The use of glasses to block blue light was found to be 41.5% of optometry students and 36.9% of general university students. The correlation between perception of the importance of blocking harmful rays and the need for guidelines for the correct selection of blue light blocking lenses was r=0.528 (p<0.001). Conclusion : Optometry students' knowledge and perception of harmful rays were found to be higher than those of general university students, and it appears to have an impact on the use of harmful ray-blocking lenses. Therefore, it is necessary to strengthen education and establish guidelines for the correct selection of harmful ray blocking lenses.

Throughfall (TF)—as a diffusive hydrological water flux—significantly affects ecohydrological and biogeochemical processes within forest ecosystems. Recent investigations have revealed the impact on TF generation processes within unmanaged coniferous plantations of under-canopy structures, particularly those laden with dead branches, as well as upper-canopy structures. However, spatiotemporal variations in TF in such plantations remain unexplored. We investigated these variations in TF in a 33-year-old unmanaged Japanese cypress (Chamaecyparis obtusa Endl.) plantation, laden with dead branches, with a high stand density (SD) of 2,500 stems ha−1. Over a two-year period (May 2017 to May 2019), we conducted weekly TF measurements using 28 manual-type TF collectors. We compared the present TF ratio and canopy water storage capacity (S) with those of previous investigations conducted on Japanese cypress plantations. Moreover, we assessed key indices contributing to spatiotemporal TF variations (canopy cover: CC and distance to the nearest stem: TFd) and potentially influential dead branch indices (number of dead branches: TFdb and vertical spacing length on a stem: TFs) to elucidate TF spatial patterns. The results showed that the TF ratio was notably lower than that in previous studies (n = 13), with SD (r = –0.92, p < 0.001) and S (r = –0.87, p < 0.001) emerging as key influential factors among other stand-structure parameters. Spatial TF patterns exhibited a decreasing trend as the gross rainfall (GR) increased. Temporal stability was not significantly associated with CC (r = 0.120, p = 0.544), TFd (r = 0.068, p = 0.731), TFdb (r = 0.211, p = 0.281), or TFs (r = 0.206, p = 0.292) for any of the TF collectors. These findings underscore the important role of GR in determining the spatial variation of TF. Collectively, our results contribute to an enhanced understanding of TF spatiotemporal heterogeneity in unmanaged Japanese cypress plantations with dead branches.

Domestic commercial low- and intermediate-level radioactive waste storage containers are manufactured using 1.2 mm thick cold-rolled steel sheets, and the outer surface is coated with a thin layer of primer of 10~36 μm. However, the outer surface of the primer of the container may be damaged due to physical friction, such as acceleration, resonance, and vibration during transportation. As a result, exposed steel surfaces undergo accelerated corrosion, reducing the overall durability of the container. The integrity of storage containers is directly related to the safety of workers. Therefore, the development of storage containers with enhanced durability is necessary. This paper provides an analysis of mechanical properties related to the durability of WC (tungsten carbide)-based coating materials for developing low- and intermediate-level radioactive waste storage containers. Three different WC-based coating specimens with varied composition ratios were prepared using HVOF (high-velocity oxy-fuel) technique. These different specimens (namely WC-85, WC-73, and WC-66) were uniformly deposited on cold-rolled steel surfaces ensuring a constant thickness of 250 μm. In this work, the mechanical properties of the three different WCbased coaitng materials evaluated from the viewpoints of microstructure, hardness, adheision force between substrate and coating material, and wear resistance. The cross-sectional SEM-EDS (Scanning Electron Microscope-Energy Dispersive X-ray Spectroscopy) images revealed that elements W (tungsten), C (carbon), Ni (nickel), and Cr (chromium) were uniformly distributed within the each coating layers which was approximately 250 μm thick. The average hardness values of HWC-85 and HWC-73 were found to be 1,091 Hv (Vickers Hardness) and 1,083 Hv, respectively, while the HWC-66 exhibited relatively lower hardness value of 883 Hv. This indicates that a higher WC content results in increased hardness. Adhesion force between and substrates and coating materials exceeded 60 MPa for all specimens, however, there were no significant differences observed based on the tungsten carbide content. Furthermore, a taber-type abrasion tester was used for conducting abrasion resistance tests under specific conditions including an H-18 load weight at 1,000 g with rotational speed set at 60 RPM. The abrasion resistance tests were performed under ambient temperatures (RT: 23±2°C) as well as relative humidity levels (RH: 50±10%). Currently, the ongoing abrasion resistance tests will include some results in this study.

This study focuses on the development of coatings designed for storage containers used in the management of radioactive waste. The primary objective is to enhance the shielding performance of these containers against either gamma or neutron radiation. Shielding against these types of radiation is essential to ensure the safety of personnel and the environment. In this study, tungsten and boron cabide coating specimens were manufactured using the HVOF (High-Velocity Oxy Fuel) technuqe. These coatings act as an additional layer of protection for the storage containers, effectively absorbing and attenuating gamma and neutron radiation. The fabricated tungsten and boron carbide coating specimens were evaluated using two different testing methods. The first experiment evaluates the effectiveness of a radiation shielding coating on cold-rolled steel surfaces, achieved by applying a mixture of WC (Tungsten Carbide) powders. WC-based coating specimens, featuring different ratios, were prepared and preliminarily assessed for their radiation shielding capabilities. In the gamma-ray shielding test, Cs-137 was utilized as the radiation source. The coating thickness remained constant at 250 μm. Based on the test results, the attenuation ratio and shielding rate for each coated specimen were calculated. It was observed that the gammaray shielding rate exhibited relatively higher shielding performance as the WC content increased. This observation aligns with our findings from the gamma-ray shielding test and underscores the potential benefits of increasing the tungsten content in the coating. In the second experiment, a neutron shielding material was created by applying a 100 μm-thick layer of B4C (Boron Carbide) onto 316SS. The thermal neutron (AmBe) shielding test results demonstrated an approximate shielding rate of 27%. The thermal neutron shielding rate was confirmed to exceed 99.9% in the 1.5 cm thick SiC+B4C bulk plate. This indicates a significant reduction in required volume. This study establishes that these coatings enhance the gamma-ray and neutron shielding effectiveness of storage containers designed for managing radioactive waste. In the future, we plan to conduct a comparative evaluation of the radiation shielding properties to optimize the coating conditions and ensure optimal shielding effectiveness.

목적: 본 연구는 COVID-19의 대유행 동안 20~30대 성인을 대상으로 컴퓨터시각증후군 (CVS, computer vision syndrome) 관련 눈의 자각증상과 시력 관련 불편감을 파악하고, 눈 건강을 위해 사용하는 예방법을 알아보고자 하였다. 방법 : 2021년 12월부터 2022년 2월까지 안경 또는 콘택트렌즈 처방과 상담을 위해 일개 안경원에 내원 했던 20~30대 성인 중에서 전신질환 및 안질환, 안과적 수술 경험이 없는 150명을 대상으로 하였다. 연구도구는 대상자의 일반적인 특성(3문항), CVS 자각증상(16문항), 시력 관리(2문항), 눈의 조절기능 이상(2문항), 청색광 차단 안경사용(2문항), 근거리교정(1문항)으로 총 26문항으로 구성된 설문지를 이용하였다. 결과 : 전체 대상자들의 CVS 자각증상은 “눈물이 많이 발생한다”가 109명(72.7%)으로 가장 높은 빈도를 보였 고, 그다음은 “눈이 아프다”가 104명(69.3%)으로 나타났다. CVS 자각증상 중 시력 관련 자각증상은 “사물이 흐 려보인다”가 106명(70.7%)으로 가장 많았다. 시력 관리방법으로는 “시력의 저하를 느껴서”가 105명(70.0%)으로 가장 많았고, 청색광 차단 안경 사용하는 대상자는 150명(84.7%)으로 80% 이상의 대상자들이 기능을 넣어서 사 용하고 있다. 결론 : CVS 자각증상 16문항 중 14문항에서 50% 이상으로 나타났다. 청색광 차단 안경을 사용하지 않는 대상 자는 CVS 자각증상 중 시력과 관련된 “시력이 나빠지는 것 같다”가 69.6%로 가장 높게 나타났다. COVID-19 대 유행 동안 자각적인 불편증상과 시력저하를 호소하는 대상자가 높게 나타나고 있다. 따라서 안경처방 시 생활환 경, 사용시간 및 자각적 증상에 대하여 문진이 필요하다고 생각된다.

At a time when the demand for drones is increasing, a plan to utilize drone images was sought for efficient promotion of cadastral resurvey. To achieve the purpose of this study, the technical and legal status of drone images was reviewed, and through this, the possibility of using it for cadastral resurvey was primarily reviewed. subsequently, an experiment was conducted targeting the project district to examine whether drone images were applied to boundary extraction, which is the primary process of cadastral resurvey. As a result of the experiment, it was found that boundary extraction from images is possible. However, in some cases, it is impossible due to field conditions or image quality. Therefore, it is necessary first to apply cases where boundary extraction is possible to cadastral resurvey and seek solutions for some impossible cases. In particular, the image quality problem may have problems with the current technology, but it will also have problems with the existing drone equipment. So, standard for drone calibration should also be established. Finally, the cadastral resurvey surveying procedure using drones was also presented.

There are many types of foam molding methods. The most commonly used methods are the pressure foaming method, in which foam resin is mixed with a foaming agent at high temperature and high pressure, and the normal pressure foaming method, which foams at high temperature without pressure. The polymer resins used for foaming have different viscosities. For foaming under normal pressure, they need to be designed and analyzed for optimal foaming conditions, to obtain resins with low melt-viscosity or a narrow optimal viscosity range. This study investigated how changes in viscosity, molding temperature, and cross-link foaming conditions affected the characteristics of the molded foam, prepared by blending rubber polymer with biodegradable resin. The morphologies of cross sections and the cell structures of the normal pressure foam were investigated by SEM analysis. Properties were also studied according to cross-link/foaming conditions and torque. Also, the correlation between foaming characteristics was studied by analyzing tensile strength and elongation, which are mechanical properties of foaming composites.

목적: 대학생을 대상으로 자외선을 포함한 청색광과 같은 유해광선에 대한 지식과 인식도를 알아보고자 하였다. 방법 : 2023년 4월부터 5월까지 온라인 설문 조사에 응답한 충남지역 대학생 103명을 대상으로 하였다. 설문 은 대상자의 일반적 특성에 관한 문항, 자외선과 청색광 차단렌즈의 착용실태에 대한 문항, 자외선과 청색광에 대 한 지식도 및 인식도 문항, 그리고 차단렌즈 선택을 위한 가이드라인의 요구도 문항으로 구성된 총 15문항의 설문 도구를 사용하였다. 통계분석은 SPSS 18.0을 사용하였다. 결과 : 자외선 차단을 위해 안경이나 콘택트렌즈를 착용하는 비율은 56.3%로 나타났으나 청색광 차단 안경이 나 콘택트렌즈를 사용하는 경우는 35.9%로 상대적으로 낮은 비율로 나타났다. 자외선과 청색광의 유해성에 관한 지식도는 각각 2.58±0.91, 2.44±0.98로 조사되었으며, 자외선과 청색광으로부터 눈 보호가 중요하다고 생각하 는 항목의 평균 점수는 각각 3.49±0.61, 3.35±0.68점으로 조사되어 자외선과 청색광 차단의 중요성에 대한 인 식도는 높은 것으로 나타났다. 결론 : 대학생들의 자외선과 청색광에 대한 지식도와 인식도는 높은 수준이었으나 청색광 차단렌즈에 올바른 선택법에 대한 지식은 낮은 수준을 나타냈다. 이에 청색광 차단렌즈의 올바른 선택을 위한 교육 강화와 가이드라 인의 구축이 필요할 것으로 판단된다.

Governments around the world are enacting laws mandating explainable traceability when using AI(Artificial Intelligence) to solve real-world problems. HAI(Human-Centric Artificial Intelligence) is an approach that induces human decision-making through Human-AI collaboration. This research presents a case study that implements the Human-AI collaboration to achieve explainable traceability in governmental data analysis. The Human-AI collaboration explored in this study performs AI inferences for generating labels, followed by AI interpretation to make results more explainable and traceable. The study utilized an example dataset from the Ministry of Oceans and Fisheries to reproduce the Human-AI collaboration process used in actual policy-making, in which the Ministry of Science and ICT utilized R&D PIE(R&D Platform for Investment and Evaluation) to build a government investment portfolio.

Natural radionuclides-containing substances (NORM) contain natural radionuclides and cause radiation exposure. In Korea, safety management measures were needed to deal with and dispose of radon mattresses containing monazite in relation to such NORM. However, there is no clear safety management system related to NORM waste in Korea. In order to manage this reasonably and systematically, it is necessary to investigate and analyze standards and management measures related to the treatment and disposal of NORM waste. Therefore, this study investigated and analyzed the exemption and clearance level of NORM waste regulations in international organizations and foreign countries. IAEA GSR Part 3, 2013/59/Euratom, ANSI/HPS N13.53, CRCPD SSRCR Part N, and ARPANSA Publications 15 safety management regulations were analyzed to investigate safety management standards for NORM waste. The exemption and clearance level in international organizations and foreign countries were compared and analyzed based on radioactive concentration and dose. In addition, the management measures proposed for each literature were also investigated. As a result of the analysis, IAEA GSR Part 3 applied 1 mSv as a regulatory exemption level, 1 Bq/g for uranium and thorium series as a clearance level, and 10 Bq/g for K-40 nuclides. The IAEA recommends a differential approach to the potential and scale of exposure. The EU applied 1 Bq/g to uranium and thorium families and 10 Bq/g to K-40 nuclides for both regulatory exemption and clearance levels. The EU recommended that it be managed in proportion to the scale and likelihood of exposure as a result of the action. It is analyzed that this is similar to the IAEA’s management plan. In the United States, there was no single federal government radioactive concentration and dose for NORM management. The management plan differed in management status and level from state to state, and K-40 was excluded from regulation unless it was intentionally enriched. In the case of Australia, the radioactive concentration of uranium and thorium was 1 Bq/g as a standard for regulatory exemption and 1 mSv as a dose. As a management plan, it was suggested to dispose of waste by means of accumulation, dilution/dispersion, and reclamation. It was also suggested that the scale of exposure, like international organizations, take into account the possibility. The results of this study are believed to be used as basic data for presenting domestic NORM waste treatment and disposal methods in the future.

In this study, radioactivity of Cs-134, Cs-137, and Eu-154, which are gamma-emitting nuclides among fission products of spent fuel, was analyzed as a tool to measure the burnup of spent fuel nondestructively. This nuclide has a unique gamma-ray energy, allowing the amount of the isotope to be estimated based on the intensity of the gamma-ray at a specific energy. The SCALE 6.2 ORIGAMI (ORIGen AsseMbly Isotopics) module and the latest ORIGEN-arp library were used for computational analysis. The spent fuel samples were selected as WH14×14 with an enrichment of 1.5~5.0wt%, a burnup of 10~60 GWD/MTU, and a cooling time of 0~40 years. The analysis results were benchmarked using SFCOMPO experimental data provided by OECD/ NEA, including isotope inventory and uncertainty measured by destructive radiochemical analysis, fuel assembly design data required for benchmark model development, reactor design information, and operating history information. 16 similar spent fuels were selected from SFCOMPO data and the calculation results of Cs-134, Cs-137, and Eu-154 were compared. The average error of the Cs-134 radioactivity calculation result was 2.81%, and the maximum error was 6.70%. The average errors of Cs-137 and Eu-154 were 2.42% and 4.95%, respectively, and the maximum errors were 5.40% and 14.91%, respectively.

The inclusion of conductive carbon materials into lithium-ion batteries (LIBs) is essential for constructing an electrical network of electrodes. Considering the demand for cells in electric vehicles (e.g., higher energy density and lower cell cost), the replacement of the currently used carbon black with carbon nanotubes (CNTs) seems inevitable. This review discusses how CNTs can contribute to the development of advanced LIBs for EVs. First, the reason for choosing CNTs as a conducting agent for the cathode is discussed in terms of energy density. Second, the reinforcing effect of CNTs on the anode is described with respect to the choice of silicon as the active material. Third, the development of water-based cathode fabrication as well as dry electrode fabrication with aid of CNTs is discussed. Fourth, three technical hurdles, that is, the price, dispersion issue, and entrapped metal impurities, for widespread use of CNTs in LIBs are discussed.

The long-tailed goral (Naemorhedus caudatus) is classified as 'vulnerable' by the International Union for Conservation of Nature and has been designated an endangered species requiring conservation and management in Korea. The sex determination region of the Y (SRY) gene is a useful marker for the study of paternal lineages; however, the SRY gene of the goral has not yet been sequenced. In this study, the nucleotide sequence of the SRY gene of long-tailed gorals was determined based on the sequence of the SRY gene of goats (Capra hircus). The obtained sequences were aligned with those of other species in the Bovidae family. The long-tailed goral SRY gene comprised 720 base pairs, and its nucleotide and protein sequences were identical to those of goats, sheep (Ovis aries), and cattle (Bos taurus) by 96%, 97%, and 93%, respectively. The results of phylogenetic insights obtained from this study constitute important references for genetic diversity and pedigrees studies of male long-tailed gorals and closely related species.

본 논문은 칼 라너가 주장한 근본적 인간 경험의 개념이 인간 주체 안에서 이루어지는 초월적 경험을 이해하는데 있어서 매우 중요한 새로운 방법을 제시하고 있음을 연구하고자 한다. 계몽주의 시대 이후로 인간에 대한 새로운 이해의 시각이 대두되기 시작했으며, 특별히 인간이 주체적으로 의미를 형성하는데 중심적인 역할을 하기 시작했다. 신적 계시 보다는 사고하는 주체로서 인간의 내면적 자아가 어떤 측면에서 의미의 원천이 되는 경향을 보이기 시작했다. 라너의 사고의 중요성은 근본적 인간 경험에 대한 이해의 깊이를 심화 시켰다는 것과 초월의 개념을 초월의 유신론적 이해를 넘어서, 더 확장 시켰다는 것이다. 따라서 본 논문은 첫번째로 근본적 인간 경험이 모든 사람들에게 존재한다는 것과 동시에 신에 대한 경험을 피할 수 없다는 것을 보여 주고자 한다. 두번째로 인간은 질문이라는 역동성과 존재에 대한 선험적 인식을 통해서 초월 할 수 있다는 것을 도출할 것이다. 세번째로 에르네스트 블로흐와 발터 벤야민에서 드러나는 무신론적 초월의 개념이 초월의 유신론적 이해와 매우 연관이 깊다는 것을 연구 할 것이다.

In Korea, Kori Unit 1, a commercial pressurized water reactor (PWR), was permanently shut down in June 2017, and an immediate decommissioning strategy is underway. Therefore, it is essential to understand the characteristics of radioactive waste during the decommissioning process of nuclear power plants (NPP). Because radioactive waste must be handled with care, radioactive waste is treated in a hot cell facility. Hot cell facility handles radioactive waste, and worker safety is essential. In this study, it was dealt with whether or not the radiation safety regulations were satisfied when processing the core beltline metal of the dismantling waste treated at the post irradiation examination facility (PIEF) of the hot cell facility. Core beltline metal used for the pressure vessel in the reactor is carbon steel, and it is continuously irradiated by neutrons during the operation of the NPP. A radiological safety estimation of the behavior of radioactive aerosols during the cutting process within the PIEF was carried out to ensure the safety of the environment and workers. When processing the core beltline metal in PIEF, dominant six nuclides (60Co, 63Ni, 55Fe, 3H, 59Ni, 14C) of aerosol are generated. Accordingly each cutting device, amount of aerosol and value of dose is different. Using a 99.97% efficiency HEPA filter, the emission concentration of the dominant nuclides (60Co, 63Ni, 55Fe, 3H, 59Ni, 14C) in the air source term was satisfied with the emission control standard of Nuclear Safety Commission No. 2016-16. It was confirmed that the radioactivity concentration in the airborne source term inside the PIEF is in equilibrium state, when ventilation is considered. Also, the mass of aerosol and the concentration of airborne source term differed according to the thickness of the saw blade of the cutting tool, and the exposure dose of the worker was different through Monte Carlo N-Particle (MCNP). At that time, 60Co accounted for 95.4% of the exposure dose, showing that 60Co had the highest impact on workers, followed by 55Fe with 2.7%. The worker’s dose limit is satisfied in accordance with Article 2 of the Nuclear Safety Act and the dose limit of radiation-controlled area is found to be satisfied in accordance with Article 3 of the rules on technical standards for radiation safety management at this time.

Kori-1, the nuclear power plants in South Korea, first started operation in April 1978 and was suspended permanently in 2017. The saturation rate time of spent nuclear fuel generated by major nuclear power plants operating in Korea are getting closer. If we fail to dispose spent nuclear fuel, which is equivalent to high-level radioactive waste, the nuclear power plants will have to be shutdown. High-level radioactive waste is permanently disposed through a deep geological disposal system because it contains long-term half-life nuclides and emits high energy. To select the deep geological disposal site and construct the disposal facilities, it is necessary to establish appropriate regulatory policies accordingly. The status of database construction in OECD-NEA, NRC, SITEX, and IAEA, which provides safety regulations for deep geological disposal system, stipulates each requirement for dismantling nuclear power plants. However, details such as specific figures are not specified, and guidelines for the disposal of high-level radioactive wastes are not clearly distinguished. In Korea, the CYPRUS program, an integrated database system, has been developed to support comprehensive performance evaluation for high-level waste disposal. However, due to several difficult situations, maintenance and upgrades have not been performed, so the research results exist only in the form of raw data and the new research results have not been reflected. Other than that, there is no preemptive basis for regulating the deep geological disposal system. With real-time database, we can develop a regulatory system for the domestic deep disposal system by systematically analyzing the regulatory condition and regulatory case data of international organizations and foreign leading countries. The database system processed and stored primary data collected from nuclear safety reports and other related data. In addition, we used relational database and designed table to maximize time and space efficiency. It is provided in the form of a web service so that multiple users can easily find the data they want at the same time. Based on these technologies, this study established a database system by analyzing the legal systems, regulatory standards, and cases of major foreign leading countries such as Sweden, Finland, the United States, and Japan. This database aims to organize data for each safety case component and further prepare a safety regulatory framework for each stage of development of disposal facilities suitable for the domestic environment.