Yangjindang house, which is located in Sang-ju province of South Korea, is one of the special Hanok structures dated back to Joseon dynasty. This study aims to examine structural safety of the Yangjindang wood frame building considering dynamic parameters such as the natural frequency and damping ratio. The numerical model of the wood frame building is implemented using Midas Gen, especially the wood joint where column and beam were connected. The behavior of the actual frame building was compared with the modeling results. In addition, structure responses such as shear force, axial force, flexural moment and deflections were calculated and compared with the allowable limits. Numerical results show that, generally, despite of some local members shear failure, Yangjindang’s structural response does not exceed the limitation according to current standards.

Mechanical components are to be produced with accurate dimensions in order to function properly in assemblies of a machine. Once designs of mechanical components are created, designers examine the designs by adopting many known experimental methods. A primary test method includes stress and strain evaluation of structural parts. In addition, fatigue test and vibration analysis are an important test method for mechanical components. Real experiments at a laboratory are established when products are manufactured. Since design changes should be done before producing the designs in factories, rapid modifications for new designs are required in production industries. FEM simulation is a proper choice for a design evaluation with speed at a detail stage in design process. This research focuses modeling and mechanical simulation of a mechanical component in order to ensure structural safety. In this paper, a universal joint, being used in driving axels of vehicles, is studied as a target component. A design model is created and tested in some ways by using commercial software of FEM. The designed component is being twisted to transmit heavy power and thus, torsional stress should be under strengths of the component’s material. The next is fatigue analysis to convince fatigue cycles to be within the endurance limit of the material. Another test is a vibration analysis for rotational components. This research draws final conclusions from these test analyses and recommends whether the designed model is under safety condition in terms of mechanical structure.

Among the soft ground improvement methods, PBD is the most common construction method because it is cheap and construction is fast. However, if the ground is rigid, additional work is required. In this study, the structural safety, natural vibration, and safety angle of the steel vertical tower structure were evaluated in the development of the PBD composite perforator which can be combined with drilling work and PBD construction. Structural safety was assessed when the wind load of 20 m/s was simultaneously applied to the PBD construction load of 20 tons, the perforating operation of 25 tons, and the wind speed of 50 m/s was applied only to the wind load. The natural frequencies were evaluated up to the sixth mode, and the safety angle was evaluated for static and dynamic safety angles.

The purpose of this study is to evaluate the structural safety of cultural altar since its bearing capacity has been questioned due to weathering damages and sectional defections. This evaluation process consists two stages; which the first is field investigation and the second is structural modeling and analysis. Based on field investigation, all of the structural members supporting the altar were carefully examined and all the findings were accounted for the development of the structural modeling using the Midas computer program. Using a 3D scanner, the weight of the Buddha statue was applied to the structural modeling. Then, according to the allowable stress design method of KBC2016, the structural safety was evaluated. Based on this result, replacements of several structural members were recommended to increase the structural safety and value of cultural property.

Rotor disc (로터 디스크)는 중대형 유조선에서 유류를 하역하는 장치인 COPT (Cargo Oil Pump Turbine)의 터빈을 고속으로 회전시키는 핵심 부품이다. 이 rotor disc는 중심 shaft에 여러 개의 turbine을 원주상으로 배열하고 체결하여 제작한다. 현재의 제작 방법으로는 turbine blade를 배열하고 shroud 덮개로 연결하여 riveting 방식으로 체결한다. 이런 고전적인 방법은 blade pitch의 불균일은 물론 작업 시 오류로 인해 blade에 손상이 가는 경우가 있다. 이러한 단점을 해결하기 위해서는 조립식의 rotor disc를 설계하여 제작방식을 변경해야 한다. 설계뿐만 아니라 조립식의 disc가 구조적으로 안정한지를 평가해야 한다. 본 논문은 blade의 설계와 이를 조립하였을 때에 구조안전성을 평가하기 위해 구조 해석하여 그 안전성을 검증 한다.

Modern manufacturing industries is to produce both precise and robust mechanical parts without failure while they are in service. In order to prevent a part failure for its lifetime, a mechanical design for a part should be examined on a basis of mechanical simulation. A nozzle plate, being a key part in steam engines, changes flow directions of steam in a turbine used in power plant. This paper is to the design and test for part safety and durability. Currently, nozzle plates are fabricated by welding nozzles to their plates. Welding causes some defects on the used materials while they are being manufactured. Another major defect is un-even pitches between welded nozzles. Welding causes phase changes because of high melting temperature of metal. This leads to decay on the welding spots, which weakens their structural strength and then, may lead to early damages on mechanical structures. This research proposes assembly-typed nozzle plate without welding. From the beginning, nozzle and plate are designed for insertion-typed assembly. Nozzle head and foot are designed in accordance with the grooves on outer ring and inner ring of a plate to make mating surfaces. Then the nozzle plate should be proved for structural and fatigue safety before they are put in manufacturing. This research adopts commercial softwares for modeling and mechanical simulation. The test result shows that the design with smaller mating area and deeper insertion produces higher safety in terms of structure and durability. From the conclusion, this paper proposes the assembly-typed nozzle plate to replace the welding typed.

최근, 레저활동 인구 및 산업의 비약적인 발전으로 인하여 소규모 부잔교 및 계류형 폰툰 플랫폼의 수요가 급증하고 있으며, 연안에서 주로 사용되는 구조물에 대한 설계 및 구조안전성 평가에 관련한 표준 규칙 및 상세 규칙에 대한 제정이 시급하다. 이러한 문제 점들에 대한 기본적인 해결책으로 본 논문에서는 설계 시 참고할 수 있는 설계 기준을 제시하고, 설계안에 대한 구조안전성 평가 절차에 대해서도 소개한다. 본 연구논문에서는 전장 15 m 폰툰형 플랫폼의 구조설계 과정 및 유한요소해석을 통한 구조 안전성을 검토하였다. 일 반적인 10 m 이하 플랫폼의 경우, 간략한 구조계산서만으로도 검토가 가능하나, 10 m 이상의 플랫폼의 경우 상세 구조강도 검토가 뒷받침 되어야만 기준에서 제시하는 안전성 확보를 위한 지침에 부합할 수 있다. 유한요소해석을 통하여 설계안에 대한 구조강도 검토를 수행하 였으며, 그 안전성을 확인하였다. 추후 연구로서는 다양한 하중조건을 동시에 검토할 수 있는 시스템개발이다.

As the demand for high-speed and high-precision machining increases, the need for cooling and filtering of cutting oil is high. A new concept of coolant heat exchange filter is developed by installing cooling coil through which refrigerant(R410-a) passes through the coolant filtering device. For structural safety evaluation of the heat exchanger filter for cutting oil suppling device of machine tool, thermal stress and vibration analysis were performed using ANSYS program. The results of structural and thermal stress analyses have led to the conclusion that the cooling system has structural stability. From modal analysis, first natural frequency is 12.37 hz and deformation is 22.041 mm. Sixth natural frequency is 26.887 hz and deformation is 25.563 mm.

The aim of this paper is to clarify the structural stability of 30m fly(maximum working radius of 30m) and telescopic boom with composition. In order to reduce the weight and insulate, the boom of special vehicle has a 3-stage telescopic boom of DOMEX960, pocket part of acetal, 2-stage refracting boom of ATOS80, insulation boom of glass fiber composition and effector. In this process, CATIA is applied to create 3D modeling, then ANSYS are performed the structural analysis. The structural analysis is performed for a case where the thickness of the insulating boom of the ATOS 80 is 7[㎜] and the thickness of the insulating boom of the FRP material is 15[㎜] and 16[㎜].

This study highlights the theme of safety leadership in railway organization, conducting empirical analysis on the relationship between safety climates, safety leadership, safety behavior, and accident. The empirical test results based on questionnaires received from 223 train drivers working at A subway firm indicated that relationship between CEO's safety philosophy, and safety communication showed a significant positive effect on boss's safety leadership. And boss's safety leadership showed a positive influence on observation belonging to safety behavior, which in turn showed a significant negative relationship with mistake. However, mistake, observation and violation were shown that there are no relationship with accidents.

The findings were summarized as follows. The safety check by manufacturer showed that 6 of 13 companies are over the average occurrence of defects. It was expected that there would be a difference between manufacturing technology capability and production system of each manufacturer. Consequently, manufacturers should institutionally improve and strengthen certification items for the upward standardization of safety certification before factory. Second, the safety check by year showed that the results of this study accord with those of previous studies on defect time. Consequently, manufacturers should classify the 3-year-old equipment for vehicle-mounted MEWP into a special check subject to do a nondestructive test according to proven results, and also reflect the test in a safety test system to do regular preventive activities of equipment defects. Third, the safety check by part showed that the boom and outrigger parts of vehicle-mounted MEWP have the most defects. Stress concentration resulted in defects as the boom part was most frequently operated in the structural parts for a real work. To prevent this, it is suitable to improve the hardness of boom materials. The outrigger part needs improvement in safety devices with materials. As an outrigger supports the overturning moment of equipment, it is most affected by its load based on the operating radius, resulting in fatigue crack.

The objective of this study is to evaluate the structural safety of the spherical-helical turbine for hydro-power. We analyze fluid-structure interaction of the spherical-helical turbine for hydro-power using ANSYS-CFX and Mechanical. The maximum combined stress, deformation and safety factor of the spherical-helical turbine in cases of three types of materials were obtained by fluid-structural analysis. From structural analysis, the maximum value of the equivalent stress occurred at the shaft of the turbine for three material types. In case of a polyethylene turbine blades, the maximum equivalent stress and safety factor were 3.46 MPa and 7.23. Polyethylene turbine blades were evaluated to be safe except of the turbine shaft. Several researches will be performed based on the results of this study and more research and development of technologies are needed in this field.

CFRP hardened by carbon fiber and resin has the property of high strength and low weight. Specifically, the strong feature against the external vibration environment is shown as CFRP is designed with the structure of multi-axes. So, CFRP in place of metal has been used at the various fields. CFRP specimens for mode Ⅱ are applied with the repetitive fatigue load in this study. These specimens have the fiber layer angles of 30°, 45° and 60°. The material properties of specimens are investigated with the result of fatigue fracture due to this load. As the study result, the smallest and largest reaction forces of 500 N and 540 N are shown at the layer angle of 30° and 60° respectively among these specimens. The separation of adhesive interface at 4000 fatigue cycles is happened earliest in case of the layer angle of 60°. But the separation of adhesive interface at 11000 fatigue cycles is happened latest in case of the layer angle of 45°. Through the result of fatigue property, it is thought that the basis data can be applied to evaluate the safety at CFRP structure applied with fatigue.

본 논문에서는 원심식 대형 압축기 구동용 모터 베이스 프레임의 구조해석 및 콘크리트 타설에 따른 구조안전성 평가를 수행하였다. 먼저 모터 베이스 프레임에 적용되는 네 가지 하중조건에 따른 구조해석을 진행하고 최대 비틀림 에너지 이론 및 Mohr-Coulomb 이론을 통하여 구조안전성을 평가하였다. 구조해석 결과에서 취약한 구조안전성을 나타낸 연결부 등의 불연속적인 부분에서 발생하는 국부응력에 대하여 ASME VIII Div. 2에 따른 구조안전성 평가를 적용함으로써 좀 더 합리적으로 구조안전성 평가를 수행할 수 있었다. 또한, 모터 베이스 프레임 내부에 콘크리트 타설 및 미타설에 따른 구조해석 및 ASME 구조안전성 평가를 통하여 모터 베이스 프레임의 구조안전성을 정량적으로 비교하여 콘크리트 타설로 인한 구조 안전성의 향상을 확인하였다.

This study on Structural analysis of kickboard used two types suspension systems. Kickboard is very dangerous in rider because of unstable in diving conditions. Thus suspension system of kickboard are very important component parts. This study focus on two suspensions for stability in kickboard which coil spring and aluminium leaf spring.