Fish resource surveys were conducted near Jeju Island in June, August and October 2021 using an underwater camera monitoring system, fish pots, and SCUBA diving methods. The efficiency of the methods used to survey fish resources was compared using the number of individuals compared to area per unit time (inds/m3/h) and the number of species compared to area per unit time (spp./m3/h). As a result of comparing the number of individuals compared to the area per unit time (inds/m3/h), the order was underwater camera 214.69, SCUBA diving 124.62, and fish pots 0.57 inds/m3/h. The number of species compared to area per unit time (spp./m3/h) is in the following order: SCUBA diving 0.85, underwater camera 0.38, and fish pots 0.01 spp./m3/h. The fish resource monitoring method using underwater cameras was found to be more efficient in individual counts, and the SCUBA diving method was found to be more efficient in species counts. When considering cost and survey efficiency, the fish resource survey method using underwater cameras was judged to be more effective. The results of this study are expected to be widely used in estimating the population density of fish, which is the core of future fisheries resource surveys.

This study examines the correlation between livestock odor civil petitions and the establishment of malodor control areas in Jeju Special Self-Governing Province, focusing on swine farms where numerous civil petitions regarding malodors have been received. After the designation of the malodor control areas, high odor concentrations occurred in Aewoleup and Jocheon-eup, and the odor concentration decreased in other areas. The number of civil petitions shows a consistent annual trend, with increased petitions from March, peaking during summer (July and August), and decreasing from September into winter. In Jeju-si, there were many civil petitions in Hallim-eup and Aewol-eup where there were many malodor control areas. However, in Seogwipo-si, there were also many civil petitions in Pyoseonmyeon, where there is no malodor control area. Additionally, we compared the average multiple of compound malodors and the rate of exceeding the maximum allowable emission level for compound malodors with the number of livestock malodor civil petitions to assess the actual state of malodors. The results reveal a stronger correlation between the number of civil petitions and the rate of exceeding the compound malodors allowable emission level than the average multiple for compound malodors. These findings provide valuable insights into addressing livestock odor concerns and enhancing malodor control measures in Jeju Island.

In this study, the thermal equilibrium of a motor operated in the sea and the temperature in the equilibrium were studied. To predict the equilibrium temperature in the sea, the cooling performance of the motor was studied by comparing results of analysis and experimental results in the air condition. By this study, the method of prediction of the cooling performance of a motor in various environments could be useful.

본고는 인지언어학의 이론 중 하나인 영상도식과 그릇도식을 통해 한·중 차등 비 교문 속 비교결과인 중국어 ‘小’에 해당하는 한국어의 다양한 표현을 연구하고자 한 다. AI 허브라는 인공지능 학습용 병렬 데이터에서 한·중 차등 비교문의 용례들을 내려받고, 그 중 비교결과 중국어 ‘小’에 해당하는 한국어의 원형 표현인 ‘작다’ 외의 확장 의미 표현을 정리하며 언어의 다의성을 역동성과 유연성으로 자연스럽게 설명 되는 영상도식으로 먼저 살펴보고자 한다. 또한 이러한 영상도식의 논리를 분리하여 생각할 수 없는 그릇도식을 통해 중국어 ‘小’와 한국어 원형의미인 ‘작다’ 외의 확장 의미 표현 들을 도식화로 살펴봄으로써 한·중 차등 비교문의 의미관계를 좀더 자세히 고찰하고자 한다.

In this study, the seismic safety of nuclear power plant structures is evaluated and verified by performing a vibration test on a relatively simple shear wall structure. The shear walls are the prominent members of nuclear power plants and resist the seismic load. The shear wall structure is designed and manufactured to perform shaking table tests and is used to increase the accuracy of the analytical method by comparing them with the numerical analysis results. Different results will be checked and more efficient application methods will be studied depending on the method of designing reinforced concrete structures.

Since the implementation of the Odor Prevention Act in 2005, the number of odor complaints has continuously increased due to the increased interest in the living environment. The current odor control means is a concentrationbased method for the source of odor. That is why there is a difference between the odor sensitivity and the result of the odor measurement in the odor damage area. The government is considering the introduction of the grid method, which is the odor management method of Germany, as the method of odor investigation in the odor damage area in the second comprehensive Odor Prevention Policy (2019-2028). The grid method is receptor-based odor measurement method that investigators use to judge odors in the field, task that expensive and requires substantial manpower and time. To study an odor measurement method that is suitable for domestic conditions, this study compared the correlation between results based on the odor frequency concept grid method around the livestock facilities and the result of ammonia concentration measured by passive air sampler. The correlation coefficient (R) that is between the frequency of odor per spot for the entire odor and the ammonia concentration that was measured by passive air sampler was 0.65 which is relatively good. Among the entire odor detected by the grid method, the correlation coefficient (R) between the odor frequency selected only for livestock odor and the ammonia concentration was significantly increased to 0.80. In addition, the correlation between odor exposure (ECPexist) and the ammonia concentration for the overall odor was 0.81 (linear) and 0.86 (index). If only the livestock odors were selected, the correlation between odor exposure and the ammonia concentration was very high at 0.96 (linear) and 0.95 (index).

In this study, we conducted the hot box tests to compare the changes in thermal insulation for the four types of multi-layer thermal screens by the used period after collecting them from the greenhouses in the field when they were replaced at the end of their usage. The main materials for these four types of multi-layer thermal screens were matt georgette, non-woven fabrics, polyethylene (PE) foam, chemical cotton, etc. These materials were differently combined for each multi-layer thermal screen. We built specimens (70×70 cm) for each of these multi-layer thermal screens and measured the temperature descending rate, heat transmission coefficient, and thermal resistance for each specimen through the hot box tests. With regard to the material combinations of multi-layer thermal screens, thermal insulation can be increased by applying a multi-layered PE foam. However, it is considered that the multilayered PE foam significantly less contributes to heat-retaining than chemical wool that forms an air-insulating layer inside multi-layer thermal screens. For the suitable heat-retaining performance of multi-layer thermal screens, basically, materials with the function of forming an air-insulating layer such as chemical cotton should be contained in multi-layer thermal screens. The temperature descending rate, heat transmission coefficient, and thermal resistance of multi-layer thermal screens were appropriately measured through the hot box tests designed in this study. However, in this study, we took into consideration only the four kinds of multi-layer thermal screens due to difficulties in collecting used multi-layer thermal screens. This is the results obtained with relatively few examples and it is the limit of this study. In the future, more cases should be investigated and supplemented through related research.

본 연구에서는 수집영상의 매 프레임 MPC(mm/pixel coefficient) 업데이팅을 통해 축 방향과 상관없이 왜곡영상에 따른 변위를 보정하는 기법에 관해 다루고자 한다. 영상의 강제적 왜곡을 위해 다양한 촬영 각도를 설정하여 실험을 진행하였으며, 캠코더의 설치 위치를 통해 0°~55°까지 5° 단위로 12가지 촬영 각도를 조정해가며 영상을 수집·분석하였다. 본 실험에 앞서 영상기반 변위계측의 유효성 평가를 위한 예비실험을 수행하였으며, GPS 및 가속도계와 계측결과를 비교해보았을 때, 영상기반 변위계측 시스템은 충분한 유효성을 갖는다고 판단된다. 촬영 각도 별로 수집된 영상을 분석하여 구조물의 최대 진폭 및 추정 진동수를 검출하였으며, 검출결과 비교를 통해 촬영 각도에 의한 영향을 판단하고자 하였다. 또한 계측된 자유 진동으로부터 감쇠비를 추정하여 추가적인 비교를 수행 하였다. 분석 결과 최대 진폭 기준 0.325mm, 오차율 기준 5.72%의 미소한 오차를 나타냈다. 진동수 추정에서도 촬영 각도 50°를 제외 하고 전체적으로 1% 미만의 오차율을 보이며 매우 유사한 추정 결과를 나타냈으며, 촬영 각도가 변화에 따른 감쇠비는 최소 1.025% 에서 최대 1.189%의 추정결과를 보이며 촬영 각도와 상관없이 전체적으로 유사한 감쇠비를 나타냈다.

배경/목적: 담도암에서 플라스틱 스텐트 너비에 따른 스텐트 생존 차이에 대한 데이터는 부족하다. 이번 연구의 목적은 담도암에서 7-프렌치와 10-프렌치 플라스틱 스텐트의 생존 차이를 보고 어떤 인자가 개방성에 영향을 미치는지 확인하고자 한다. 방법: 2010년 1월부터 2014년 10월까지 연세대학교 원주세 브란스기독병원에서 담도암으로 담도가 막힌 환자들을 등록 하였다. 결과: 총 215명(7-프렌치:10-프렌치 = 89명:126명)의 환자 를 후향적으로 등록하였다. 암의 위치는 총담관(111명), 간문 부 담관(45명), 바터팽대부(59명)였다. 스텐트 이동이나 폐쇄는 두 군 간에 통계적 차이가 없었다. 중앙 스텐트 생존은 7-프렌치의 경우 3.3개월이었고 10-프렌치의 경우 5.9개월이었다 (p = 0.543). 플라스틱 스텐트 너비는 스텐트 생존에 영향을 미치지 않았다(Hazard Ratio: 1.11, 95% CI 0.71-1.73, p = 0.649). 결론: 담도암 치료에 있어 7-프렌치와 10-프렌치 플라스틱 스텐트는 스텐트 이동이나 폐쇄 차이가 없었고 스텐트 생존에 있어 7-프렌치 플라스틱 스텐트가 10-프렌치에 비해 열등하지 않았다

The purpose of this study is to analyze the distribution of Candida species in patients with oral disease and clarify the distinction of Candida culture test according to its isolation technique. 75 samples was isolated from 42 patients who visited Chonnam National University Dental Hospital due to oral disease from December 2015 to August 2016. For isolating the candida sampling, saliva sampling and oral swabbing were used. Acquired sampling was cultured in CHROMagar Candida Culture Medium, which indicates the candida species as color. Of the 42 patients, C. albicans was the most frequently isolated species in 39 patients. For 17 patients out of 21 who underwent saliva sampling and oral swabbing simultaneously, oral swabbing was quantitatively underestimated comparing to saliva sampling. 12 samples in 21 samples having particular Candida species were not isolated by oral swabbing. Considering the possibility of fungal infection in various oral disease, it is recommended to perform not only oral swabbing but saliva sampling when isolating Candida.

All measurements include uncertain factors affecting the result in accordance with environment and conditions. In order to guarantee right decision making and quality improvement, these factors must be found and appropriate actions should be taken. This paper aims to estimate and analyze variabilities found in set-up and as well as measurement uncertainty when using CMM(Coordinate Measuring Machine). Two skilled operators were selected to individually measure a product which was a kind of main part of an engine called connecting rod cap. The results showed that at the least, 10 % was stable while at the most, 30 % was somewhat unstable regarding P, percentage of measuring errors. There was little difference between the two operators on measurement uncertainty expecially considering their degree of freedom based on their objective and subjective judgement of type B uncertainty despite the significant difference between them. Through this research, I have come to a conclusion that a much more detailed analysis on variation factors can be identified in general measurement by using CMM and the result of set-up variability demands specific investigation and efforts to improve operators’ skill or thorough examination on the method of setting product to minimize set-up variability later.

Настоящая работа посвящена особенностям результативных конс трукций русского и корейского языков в сравнении с английс кимязыком. Так как морфологические и синтаксические свойств а результативных конструкций отличаются друг от друга в раз личных языках, то важным для перевода данных конструкций с одного языка на другой является правильное и точное их по нимание. Так, например, в русском языке не существует так наз ываемойвторичнойпредикации, которая возможна в корейском и английском языках. Вместо этого в русском языке существуе т множество глаголов с приставками и глаголов с приставками и возвратным суффиксом(-ся), имеющих ту же самую семантиче скую структуру, что и в результативных конструкциях. Корейс кие результативные конструкции тесно связаны с морфологией, в корейском языке есть результативные морфемы ‘-게, -도록’, к оторые так же употребляются в других значениях помимо резул ьтативного. В статье подробно описываются способы перевода р езультативных конструций русского и корейского языков в соо тветствии с типами глаголов.

In this study, the RDII predictions were compared using two methodologies, i.e., the RTK-based and regression methods. Long-term (1/1/2011~12/31/2011) monitoring data, which consists of 10-min interval streamflow and the amount of precipitation, were collected at the domestic study area (1.36 km2 located in H county), and used for the construction of the RDII prediction models. The RTK method employs super position of tri-triangles, and each triangle (called, unit hydrograph) is defined by three parameters (i.e., R, T and K) determined/optimized using Genetic Algorithm (GA). In regression method, the MovingAverage (MA) filtering was used for data processing. Accuracies of RDII predictions from these two approaches were evaluated by comparing the root mean square error (RMSE) values from each model, in which the values were calculated to 320.613 (RTK method) and 420.653 (regression method), respectively. As a results, the RTK method was found to be more suitable for RDII prediction during extreme rainfall event, than the regression method.

항공기는 목적에 따라서 민간 항공기, 무인항공기, 전투기, 헬리콥터 등 다양한 항공기가 존재한다. 이 각각의 항공기는 특정한 목적에 맞게 형상 및 설계가 된다. 특히 항공기 개발과정에서 중요한 해석과정 중 하나가 구조해석이다. 하지만 항공기 구조가 복잡해지고 3차원 모델로 구조해석을 하게 되면 시간과 비용이 크게 증가하게 된다. 따라서 해석 효율성을 위해서 1차원 등가 보나 2차원 평면 응력 조건을 이용하여 실제 구조를 보다 간단하게 모델링한다. 하지만 이런 모델링은 실제 구조와 차이가 있으므로 실제 구조를 잘 반영할 수 있는 적절한 모델링이 필요하다. 따라서 구조형태에 따라서 1차원 등가 보와 2차원 평면응력 조건을 적절하게 선택하여야 한다. 본 논문에서는 EDISON에 업로드 된 구조해석 프로그램을 이용하여 1차원 구조해석과 2차원 구조해석을 검증하고 구조형태에 따라서 1차원 해석과 2차원 해석을 각각 3차원 MSC NASTRAN 구조해석과 비교하여 적절한 해석방법을 찾고자 한다. 비교결과 길이 대 높이 비가 증가할수록 1차원 해석과 3차원 해석의 오차가 급격히 줄어들었으며 이 비율이 18보다 증가하였을 때는 1차원 해석이 2차원 해석보다 3차원 해석의 결과와 일치하였다.

This study is done as a comparison analysis on existing studies on analysis and interpretations of solenoids. When there is no power in a solenoid valve, a flow passage is formed from a pressurized ports, Pc, to Ps, which are connected to a crankcase of a pressurizer. An inlet to Pc port is varied in three different sizes: 3.8 ㎜(Type-1), 4.0 ㎜(Type-2) and 4.2 ㎜(Type-3). It is determined that there will be changes in coolant flow into the solenoid valve and the flow properties from Pc port to Ps port are compared and analyzed. As the results, the flow demonstrates the maximum speed of 500 ㎧, 46 ㎧ and 433 ㎧ with 0.2 ㎫ for the inflow pressure and the maximum speed of 1400 ㎧, 129 ㎧ and 1200 ㎧ with 1.5 ㎫ for the inflow pressure.