Recently, Product-Service System(PSS) is a rising paradigm that enables integration between products and services offering. Also, academic interests for product-service design using the house of quality (HOQ) have been emerged. the engineering characteristics of the HOQ are usually extracted by experts. However, as the new technologies were merged, it was difficult to find the optimum expert for extracting the engineering characteristics in the fusion technology. Therefore, this paper applies the topic modeling technique using patent data to extract the engineering characteristics which considers not only products features but also services characteristics. Also, a case study demonstrates the usefulness of our approach with augmented reality-head mounted display. It was conducted to make the HOQ with distinct four steps. First, the customer needs were collected through the latest device review from website and grouped into the representative customer needs. Second, the engineering characteristics of the augmented reality-head mounted display were extracted by using the US patent data of augmented reality head mounted display through the topic modeling technique. Third, the correlation degree of product - service characteristics was drawn by using the extracted topic’s cosine similarity. Finally, the relationship matrix of customer needs and engineering characteristics was filled with experts. After which we suggest product-service business concepts from HOQ. Main advantage is appeared from the result of this research paper is that it can provide the business concepts of the integrated product-services to reflect the customer requirements. This business concepts are utilized for the early phase in R&D planning.

The purpose of this study was to investigate the effects of strengthening and stretching exercises on forward head angle and static·dynamic balance ability. 21 adults with the forward head posture were participated in this study. Subjects were randomly assigned to strengthening exercise group I(n=11) and stretching exercise group II (n=10) respectively. Each group were underwent six intervention over the period of 2 weeks, each session lasting 30 minutes. During a preliminary examination, forward head angle and static∙dynamic balance were measured, and a post examination was conducted that involved same procedure as preliminary examination. There were significant differences in forward head angle after exercise in both groups. In the strengthening group, center of gravity total sway distances was significantly changed under all conditions. In the stretching group, center of gravity total sway distances was significantly changed when subjects had their eyes open while standing on an foam surface. There were significant changes in center of gravity sway velocities in the strengthening group under all conditions, and the same was true in the stretching group only when the subjects had their eyes open while standing on an foam surface. In the comparison between groups, eyes closed while standing on a firm surface was significantly different. There was a significant difference in dynamic balance of the stretching group when the subjects tilted their bodies forward, and there was a statistically significant difference between groups under the same condition. The results of this study suggest that forward head posture can be corrected through therapeutic exercise, and muscle strengthening exercise more effective in improving static balance of forward head posture more than stretching exercise.

The purpose of this study was to identify the effects of cervical alignment, pain, and physique to apply proprioceptive neuromuscular facilitation( PNF) techniques in patients with forward head posture (FHP). The subjects of this study were 24 patients diagnosed with FHP. They were randomly divided into two groups: a PNF group(n=12) and a control group(n=12). The intervention was performed a total of 24 times, 30 min a day, six times a week for four weeks. Data on cervical alignment(forward head displacement, FHD), pain(visual analog scale, VAS), and physique(height, weight, and body mass index) were obtained pre- and post-intervention. Two-way repeated measures ANOVA was used to compare the groups and time. For FHD, the VAS, and physique(height and BMI), there was an interaction effect for the groups and time(p<.001, BMI: p<.05) and main effects for time(p<.001, BMI: p<.05). For weight, there were main effects of time(p<.01). For FHD(p<.01) and the VAS(p<.05), there were main effects for the groups. In the PNF group, there were significant improvements in FHD, VAS, and physique. In the control group, there was a significant increase in FHD. The results of this study indicated that PNF intervention using scapular and upper extremity patterns effective in FHP positively. The use of a therapeutic intervention on physique changes may also be effective in improving poor posture and help to better patients’ quality of life.

The purpose of this study was to investigate the effects of occipital bone stimulation by cervical stabilizing exercise on the muscle tone, stiffness, ROM, and cervical lordosis in patient with forward head posture( FHP). This study was a case study of a single patient with forward head posture. This study used a ABA' design, A and A' were the baseline phases and B was the intervention phase. The intervention was occipital bone stimulation by cervical stabilization exercise. It was administered once daily for 7 days. The therapist kept hands together, and placed the two index fingers under the subject's occipital bone. The subject performed the chin-in exercise with a maximum isometric contraction for 20 sec.The exercise was implemented by performing the movements 10 times as a set and repeating the set three times. The muscle tone was not significantly changed after intervention. However, the stiffness was decreased and lasted the effect lasted without intervention. The cervical flexion angle was increased, but the cervical extension angle was not significantly changed after the intervention. The left and right lateral flexion angles were increased and the effect lasted without any intervention. However, the left and right rotation angles were significantly changed after the intervention. Cervical lordosis increased not from 37° to 41° after the intervention. These results suggest that occipital bone stimulation by cervical stabilizing exercise had a positive effect on cervical stiffness, flexion and lateral flexion ROM, and lordosis in a patient with forward head posture.

The purpose of this study was to examine the effects of display on time on tasks and virtual presence in the immersive virtual reality. Head mounted display (HMD) and monitor conditions were compared when the participants were asked to complete navigation tasks in a virtual classroom. Time on tasks and virtual presence were measured. Three factors of the virtual presence were applied as dependent variables such as 1) spatial presence, 2) involvement, and 3) realness. The results showed that HMD condition took longer time to finish tasks than monitor conditions. HMD condition showed significantly higher perception from all of the virtual presence factors. Interestingly, there was a significant interaction effect between the display conditions and presence factors. The relationship between display types and virtual presence factors were discussed for future study.

Background: A forward head posture (FHP) is one of the most common types of poor head posture in patients with neck disorder. A prolonged FHP might increase pressure on the posterior cranio-cervical structure and exhibit reduced performance on a cranio-cervical flexion test (CCFT). CCFT is included to activate deep cervical flexor muscles and inhibit excessive activation of superficial cervical flexor muscles. Therefore, the selective activation of deep cervical flexors is needed for effective exercise for FHP. Objects: The purpose of this study was to compare muscle thickness between longus colli (Lco) and sternocleidomastoid (SCM) using ultrasonography in subjects with FHP depending on head support. Methods: This was a cross-sectional, case-control research design study. The ultrasonographic images of Lco and SCM were taken in 17 subjects with FHP during the 5 phases of the CCFT with and without a head support. Towel was used for supporting head to make the neutral head position in supine. Changes in muscle thickness during the test were calculated to infer muscle activation. Data were analyzed using repeated measures of two-way analysis of variance with the significance level of .05. Results: When subjects performed the CCFT with head support, there was a significant difference in muscle thickness of Lco and SCM (p<.05). According to a post hoc paired t-test, change of thickness of Lco was greater at all phases, and change of thickness of SCM muscle was less at phase 4 and 5 in condition with head support (p<.01) compared to condition without head support (p<.01). Conclusion: The result of this study suggest that applying head support for neutral head position during CCFT could be a useful method for activating Lco muscle without excessive activation of SCM muscle.

The characteristics of stress distribution and fatigue life have been investigated in the road mower head system using FEM(Finite Element Method). There is high stress distribution around the coupling part with non-uniform load from the irregular road surface. Maximum equivalent stress especially occurs in the fixed plate and the pillar of the head device with maximum deformation at the rotation axis frame of the mower system. Fatigue life tests were also performed with SAE bracket history, SAE transmission, and sample history conditions. SAE bracket history and SAE transmission predicted the possibility of high damage while Sample history showed a stable trend. These results will be applicable in optimal design for various systems equipped with mower head system.

The objective of this study was to review Dasik’s recipe of Jong-Ga in the Gyeongbuk area. Main methods of this study were literature review and in-depth interview. To study the historical transition of traditional Dasik, analysis of 11 cooking books from the 1400’s to 1800’s was carried out. Jong-Ga was made using Dasik and main ingredients were Songhwa, Kka and Kong Dasik. Special Dasik was in nine of Jong-Ga (Ipjae’s head family of Pungyang Jo’s clan, Sojea head family Gwangju No’s clan, Sawoodang head family Uiseong Kim’s clan, Heobaekdang’s head family of Bukye Hong’s clan, Taechon’s head family of Gyeseong Go’s clan, Gwiam’s head family of Gwangju Lee’s clan, Songdang’s head family of Milyang Park’s clan, Haeweol's head family of Pyeonghae Hwang's clan, Galyam's head family of Jaeryoung Lee’s clan) and Dasik are Gamphi dasik, Heukimja dasik, Baksulgi dasik, Tibap dasik, Daechu dasik, Yukpo dasik, Misutgaru dasik, Dotori dasik and Omija Dasik. It was used as a ritual food and reception food for guests. These recipes are good examples of functional and modern of Korean food. In the future, Dasik as well as discovery of ingredients in other foods of Jong-Ga are needed.

This study aims to understand the their characteristics and analyze the diverse landscape plants distributed in the traditional temples. We surveyed the landscape plants that the planting species around building and terraced flower bed, excluded the spontaneous species. The contents of analysis were form, leaf fall and type, exotic species and the Buddhist symbol plant. Mostly, the families of landscape plants that rosaceae, compositae and liliaceae were much used. The rosaceae were used in landscape planting, and compositae and liliaceae were used in terraced flower bed and flower garden. Especially, a single planting, a linear planting and symmetrical planting most occupied in the planting types. This reason seemed the object and function of religion. There were lots of trees and shrubs in the form, and they were main material for formation of landscape and frame. Therefore, the temple landscape was composed of landscape plants and planting types and fell into chime with these components. The deciduous broad leaved was many in the leaf fall and type. The aesthetic value is a deciduous broad leaved directed by the external features of nutrition and reproductive organs with plants and flowers, recording, leaves, fruits, and non-seasonal forms along with the variety of landscapes inspectors by providing visual variety, because expression. Exotic species were introduced intentionally, unintentionally for a variety of purposes in a foreign species, naturalized plants invasive species was the wild country to adapt to the environment. Exotic materials will have to be rejected unconditionally, but indiscriminate use of space in a traditional review of the planting material is necessary because of the high potential to inhibit and distort the traditional landscape. Buddhist symbol plant is a very important feature as plants that have the least Buddhist doctrine and has a meaning and a symbol representing the Buddhist, the inspectors can show the difference with other scenic areas.

In this study, natural frequency characteristics of road mower head system are investigated through experiment and numerical analysis. ANSYS workbench 14.5 is used to calculate the frequency analysis in the mower system. Compared the natural frequency using the modal test and computerized analysis. When compared with the experimental results, a 5% error rate has occurred. Simulation results showed that vibration mode shape has directional characteristics, especially to the right and left. These results will be helpful in optimal design for road mower head systems.

Background: For the treatment of forward head posture (FHP) and forward shoulder posture, methods for strengthening scapular retractors and deep cervical flexors and stretching pectoralis and upper cervical extensors are generally used. No study has yet assessed whether suboccipital release (SR) followed by cranio-cervical flexion exercise (CCFE) (SR-CCFE) will result in a positive change in the shoulders and neck, showing a “downstream” effect. Objects: The purpose of this study was to investigate the immediate effects of SR-CCFE on craniovertebral angle (CVA), shoulder abduction range of motion (ROM), shoulder pain, and muscle activities of upper trapezius (UT), lower trapezius (LT), and serratus anterior (SA) and LT/UT and SA/UT muscle activity ratios during maximal shoulder abduction in subjects with FHP. Methods: In total, 19 subjects (7 males, 12 females) with FHP were recruited. The subject performed the fifth phase of CCFE immediately after receiving SR. CVA, shoulder abduction ROM, shoulder pain, muscle activities of UT, LT, and SA, and LT/UT and SA/UT muscle activity ratios during maximal shoulder abduction were measured immediately after SR-CCFE. A paired t-test and Wilcoxon signed-rank test were used to determine the significance of differences in scores between pre- and post-intervention in the same group. Results: The CVA (p<.001) and shoulder abduction ROM (p<.001) were increased significantly postversus pre-intervention. Shoulder pain was decreased significantly (p<.001), and LT (p<.05) and SA (p<.05) muscle activities were increased significantly post- versus pre-intervention. The LT/UT muscle activity ratio was increased significantly post- versus pre-intervention (p<.05). However, there was no significant change in UT muscle activity and SA/UT muscle activity ratio between pre- and post-intervention (p˃.05). Conclusion: SR-CCFE was an effective intervention to improve FHP and induce downstream effect from the neck to the trunk and shoulders in subjects with FHP.

Human body and head lice are obligatory human ectoparasites. Although both body and head lice belong to a single species, Pediculus humanus, only body lice are known to be a vector of several bacterial diseases. The higher vector competence of body lice is assumed to be due to their weaker immune response than that of head lice. To test this hypothesis, immune reactions were compared between body and head lice following infections by two model bacteria, Staphylococcus aureus and Escherichia coli, and a human pathogen, Bartonella quintana. Following dermal or oral challenge, the number of these bacteria increased both in hemocoel and alimentary tract of body lice but not in head lice and the viability of the B. quintana was significantly higher in body louse feces, the major route of infection to human. In addition, body lice showed the lower basal/induced transcription level of major immune genes, cytotoxic reactive oxygen species and phagocytosis activity compared with head lice. These findings suggest that a reduced immune response may be responsible, in part, for the increased proliferation and excretion of viable bacteria which are associated with the high level of human infectivity seen in body versus head lice.

The purpose of this study was to identify the effects of continuous muscle strengthening applied to the antagonist of the sternocleidomatoid, upper trapezius, and pectoralis major, which are the shortened muscles of forward head posture(FHP) subjects, and Evjenth-Hamberg stretching(EHS) applied to the shortened muscles on changes in pressure pain threshold(PPT). Twenty subjects were divided into the continuous antagonist strengthening( CAS) group(n=10) and the EHS group(n=10), and each group performed its respective exercise three times a week for a six week period. The results were as follows: The comparison of changes in PPT within each group before and after the treatment showed a statistically significant difference( p<.05) according to the treatment period and a statistically significant difference according to the treatment period and method(p<.05). While the comparison of the tests of between subjects effects between the groups did not show a statistically significant difference, the CAS group exhibited better effects. The above results suggest that the combined application of CAS and EHS generates better effects on changes in PPT than the single application of EHS. Given that stretching and muscle strengthening exercises even for the short research period of six weeks could change the PPT, continuous exercises and a correct postural habit for a longer period of time are likely to help prevent chronic pain and correct FHP

Beam hardening artifact can be caused by metal material when performing PET exam. Therefore, we studied a solution decreasing artifact caused by metallic dental implant. The higher voltage, the lesser artifact in CT exam. But Higher voltage dosen't affect PET exam. The thicker silicon the lesser artifact in CT and PET exam. Both methods make less artifact in CT and PET exam. But considering safety of patient, the way of using silicon is better.

This study was conducted, using 10 high-quality rice varieties, at 24 experimental sites in 2013 and 2014 to analyze the comparative relationship among head rice yield (HRY), its attributes and sub-attributes. In the data set pooled across sites, years and varieties, where regional and varietal variations were combined, HRY was associated with milled rice yield (MRY) more closely than percentage of head rice (PHR) although both MRY and HRY demonstrated significant relationship with HRY. In the PHR higher than 80%, compared to 80% or less, fitness of the regression between PHR and HRY decreased. MRY and PHR, the two attributes of HRY, were not significantly associated with each other. Regional variation of HRY was associated only with MRY while varietal variation of HRY was related to both MRY and PHR. HRY and MRY showed regional variation greater than varietal variation meanwhile PHR demonstrated regional and varietal variations in a similar range. In the data set pooled across sites, years and varieties, MRY demonstrated relationship with spikelets per square meter (SPIK) in a higher significance than percentage of grain filling (PGF) and 1000-brown rice weight (TBRW). Both regional and varietal variations of MRY showed significant relationship only with SPIK, neitherwith PGF nor TBRW. It is concluded that regional variation of HRY was affected by MRY, varietal variation by both MRY and PHR, and region-variety combined variation mainly by MRY.

목 적 : 두경부는 해부학적 구조가 복잡하기 때문에 두경부 검사 시 고해상도의 영상을 필요로 하게 된다. 하지만 고해상도의 영상을 얻기 위한 검사 시 상악부에 치과 보철물이 삽입되어 있거나 뇌동맥 coil이 있는 경우 1.5T에 비해 3T는 자화 감수성의 차이가 더욱 더 커지게 되어 metallic susceptibility artifact가 크게 나타나게 된다. 이에 자기 공명 확산강조 검사 시 자장 세기의 증가로 인한 금속물질에 대한 metallic susceptibility artifact의 증가와 기존의 3T에서 Single shot DWI를 이용한 DWI검사에 비해 RESOLVE technique을 이용한 DWI 검사 시 metallic susceptibility artifact의 감소에 대한 유용성을 알아보고자 한다. 대상 및 방법 : 치과보철물(백금78%+metal) 과 임플란트(티타늄+메탈), 두 개내 혈관용 코일(10cm)을 기존의 Single shot DWI를 이용하여 scan을 시행하고 RESOLVE를 이용하여 3T에서 각각 5회씩 Scan하였다. 또한 자장의 강도에 따른 자화 감수성의 변화를 알아보기 위하여 1.5T에서 Single shot DWI를 5회 추가로 scan하였다. 사용된 장비는 SIEMENS사의 Avanto 1.5T와 Skyra 3.0T를 사용하였으며 1.5T에서 진행한 Scan parameter는 FOV 220mm, matrix 190, slice Thickness 5.0mm, slice gap 1.5mm, TR 4000ms, TE 95ms, slice수 24이며 3.0T에서 진행한 single shot DWI scan parameter는 FOV 220mm, matrix 190, slice Thickness 5.0mm, slice gap 1.5mm, TR 5300ms, TE 87ms, slice수 24이며 3.0T에서 진행한 REOLVE DWI scan parameter는 FOV 220mm, matrix 190, slice Thickness 5.0mm, slice gap 1.5mm, TR 4700ms, TE1 68ms, TE2 112ms, slice수 24, readout segment 7 이며 phase encoding 방향은 Anterior-Posterio로 모두 동일하게 하였다. arifact의 측정은 marosis사의 M-view의 length tool을 이용하여 b-value 0은 window width(이하 ww) 1800 window level(이하 wl) 1000, b-value 1000은 ww 1000, wl 500으로 ADC는 ww 3000, wl 1500으로 고정하여 10년 이상의 경력을 가진 방사선사 3인이 5회씩 측정한 후 평균값을 산출하였다. 결 과 : 측정결과 급성뇌경색 진단에 주로 사용하는 b-value 1000에서 백금 78%+metal은 평균 측정치 1.5T single shot DWI 44.76mm, 3.0T single shot DWI 47.96mm, 3.0T RESOLVE 36.13mm이며 임플란트(티타늄)는1.5T single shot DWI 31.26mm, 3.0T single shot DWI 37.44mm, 3.0T RESOLVE 32.48mm이고 두 개 내 코일은 1.5T single shot DWI 19.76mm, 3.0T single shot DWI 31.20mm, 3.0T RESOLVE 16.44mm로 모든 실험에서 3.0 single shot >1.5Tsingle shot> 3.0T RESOLVE순으로 Metallic artifact가 크게 나타났으며 재료별로는 보철물>임플란트>코일 순으로 Metallic artifact가 크게 나타났다 결 론 : 확산 강조 자기공명 검사에서 자장의 세기가 증가할 때 metallic susceptibility artifact는 더욱 크게 나타나며 RESOLVE를 사용한 확산강조 자기공명 검사는 자화율차이에 의한 왜곡에 효과적이며 보철물이나 뇌동맥 coil과 같은 금속물이 삽입되어 있는 두경부 검사에서 metallic susceptibility artifact를 감소시키는데 그 유용성이 매우 큰 것으로 사료된다

This study aims to investigate the availability of the head direction parameter to Korean learners of English to find out how learners learn the head direction of English phrases in the EFL classroom. 95 intermediate and beginner students in their first year of middle school in Korea completed production and comprehension tasks. The results showed that the head final strategy is used more often than other interlanguage strategies when the head initial strategy is not available, which tends to show that the head parameter is reset through L1 values. In addition, the production task also proved that the acquisition of the VP head direction is accompanied by the acquisition of the NP, PP and AP head directions. In contrast, the participants showed a strong tendency of applying the head final strategy in translating English sentences in comprehension tasks. One possible explanation for this discrepancy between the production and comprehension tasks is that the interference of the Korean head final structure lets students decide the noun before the head is the compliment of the head. The pedagogical implication drawn from this study is that the head direction should be taught to beginners particularly in communicative classrooms

This study compared the effects of the initial head position (i.e., a HHP versus a relaxed head position) of subjects with and without a FHP on the thickness of the deep and superficial neck flexor muscles during CCF. The study recruited 6 subjects with a FHP and 10 subjects without a FHP. The subjects performed CCF in two different head positions: a HHP, with the head aligned so that the forehead and chin formed a horizontal line, and a relaxed head position (RHP), with the head aligned in a self-selected comfortable position. During the CCF exercise, the thickness of the longus colli (LCo) and the thickness of the sternocleidomastoid (SCM) were recorded using ultrasonography. The thickness of each muscle was measured by Image J software. The statistical analysis was performed with a two-way mixed-model analysis of variance. The thickness of the SCM differed significantly (p<.05) between the subjects with and without FHP. According to a post hoc independent t-test, the change in thickness of the SCM increased significantly during CCF in the subjects with FHP while adopting a HHP compared to that in the subjects without FHP. The change in thickness of the SCM was not significantly different between the two positions in subjects without FHP, and there was no significant change in thickness of the LCo muscle during the CCF exercise according to the initial position in both subjects with and without FHP. The results suggest that CCF should be performed in RHP to minimize contraction of the SCM in subjects with a FHP.

Beam hardening artifact can be caused by metal material when performing PET exam. Therefore, we studied a solution decreasing artifact caused by metallic dental implant. The higher voltage, the lesser artifact in CT exam. But Higher voltage dosen't affect PET exam. The thicker silicon the lesser artifact in CT&PET exam. Both methods make less artifact in CT&PET exam. But considering safety of patient, the way of using Silicon is better.

Numerical analysis was performed to analysis the structural characteristics of the head device in the road mower system. The head device connects mower system with the boom of the special vehicle. The system with various road surface conditions is subjected to continuous vibration and repeated load. Especially, the maximum equivalent stress occurs in the pillar of the head device, and the maximum equivalent strain also occurs in the fixed plate that supports the mower system. Fatigue analysis results show that the upper end of the pillar is very vulnerable. This analysis results can be used as basic data for optimal road mower head system design.