The purpose of this study was to examine the quality characteristics of cookies made with Angelica gigas Nakai fermented by Lactobacillus paracasei. As the content of Angelica gigas Nakai fermented by L. paracasei (AFL) powder increased, the pH of the cookies decreased from 6.3 to 5.2. There was no significant difference in the moisture content depending on AFL powder content. The content of reducing sugar also increased with increasing AFL powder content. Regarding the surface color of the cookies, the L- and b-values decreased with increasing AFL powder content, whereas the a-value increased. As the AFL powder content increased, the total polyphenol content and ABTS and DPPH radical scavenging activities significantly increased. Cookies with 8% AFL powder (AC8) had the highest levels of 107.16 mg%, 38.69%, and 65.56%, respectively. The texture, adhesiveness, and cohesiveness of the cookies with various AFL powder levels were not significantly different, and hardness, springiness, gumminess, and chewiness showed no tendencies toward changes. Taken together, these results showed that when AFL powder was added to cookies, bioactivities such as antioxidant activity increased, making AFL powder a good material with high potential for use in commercially baked products.

This study examined the quality characteristics of yanggaeng with rice germ; it was incorporated into yanggaeng at different levels (containing 5% rice germ, 10% rice germ, 15% rice germ, and 20% rice germ) based on the total weight of red bean extracts. For analyzing the quality characteristics of yanggaeng, moisture content, hardness, color, antioxidant activity, total polyphenol content, reducing sugar, and vitamin E were determined. There was no significant difference in the moisture content and hardness except in the control. For color, lightness and yellowness of yanggaeng increased as the concentration of the powder was increased, whereas there was no significant difference in redness. As the rice germ powder was increased, total polyphenol content and antioxidant activity increased significantly, whereas reducing sugar decreased. Especially, total vitamin E, including isomers, increased as the concentration of the powder increased from 0.41 mg/100 g to 4.03 mg/100 g. Therefore, it could be possible to develop processed products with functional snack for yanggaeng prepared by adding 10% rice germ.

A well-established characterization method is required in powder bed fusion (PBF) metal additive manufacturing, where metal powder is used. The characterization methods from the traditional powder metallurgy process are still being used. However, it is necessary to develop advanced methods of property evaluation with the advances in additive manufacturing technology. In this article, the characterization methods of powders for metal PBF are reviewed, and the recent research trends are introduced. Standardization status and specifications for metal powder for the PBF process which published by the ISO, ASTM, and MPIF are also covered. The establishment of powder characterization methods are expected to contribute to the metal powder industry and the advancement of additive manufacturing technology through the creation of related databases.

Cu-Fe alloys (CFAs) are much anticipated for use in electrical contacts, magnetic recorders, and sensors. The low cost of Fe has inspired the investigation of these alloys as possible replacements for high-cost Cu-Nb and Cu-Ag alloys. Here, alloys of Cu and Fe having compositions of Cu100-xFex (x = 10, 30, and 50 wt.%) are prepared by gas atomization and characterized microstructurally and structurally based on composition and powder size with scanning electron microscopy (SEM) and X-ray diffraction (XRD). Grain sizes and Fe-rich particle sizes are measured and relationships among composition, powder size, and grain size are established. Same-sized powders of different compositions yield different microstructures, as do differently sized powders of equal composition. No atomic-level alloying is observed in the CFAs under the experimental conditions.

Abstract Y2Ti2O7 nanoparticles (0.3 mol%) have been successfully synthesized by the co-precipitation process. The samples, adjusted to pH7 with ammonia solution as catalyst and calcined at 700~900 ℃, exhibit very fine particles with close to spherical shape and average size of 10-30 nm. It was possible to control the size of the synthesized Y2Ti2O7 particles by manipulating the conditions. The Y2Ti2O7 nanoparticles were coated on a glass substrate by a dipping coating process with inorganic binder. The Y2Ti2O7 solution coated on the glass substrate had excellent adhesion of 5B; pencil hardness test results indicated an excellent hardness of 6H. The thickness of the thick film was about 30 μm. Decomposition of MB on the Y2Ti2O7 thin film shows that the photocatalytic properties were excellent.

This study was aimed at synthesizing and characterizing cerium-doped titania. Cerium-doped anatase titania powders were prepared by sol-gel process, with ammonium (IV) nitrate and titanium (IV) butoxide as the raw materials. The characteristics of pure TiO2 and cerium-doped TiO2 were investigated by XRD, TG/DTA, FE-SEM, and UV-vis spectroscopy. The results of this study show that anatase type of TiO2 was obtained in as-prepared and calcined TiO2 and Ce-TiO2 powder. A DTA curve was also observed as the crystallization temperature decreased with increasing cerium contents. We found that the crystallite size of the obtained anatase particles decreased from 55 nm to 25 nm and the particle size decreased with increasing cerium contents. Moreover, UV-vis spectra showed that anatase titania powders with various cerium contents effectively extend the light absorption properties to the visible region.

In this study, p-type : TAGS-85 compound powders were prepared by gas atomization process, and then their microstructures and mechanical properties were investigated. The fabricated powders were of spherical shape, had clean surface, and illustrated fine microstructure and homogeneous + GeTe solid solution. Powder X-ray diffraction results revealed that the crystal structure of the TAGS-85 sample was single rhombohedral GeTe phase, which with a space group . The grain size of the powder particles increased while the micro Vickers hardness decreased with increasing annealing temperature within the range of 573 K and 723 K due to grain growth and loss of Te. In addition, the crystal structure of the powder went through a phase transformation from rhombohedral () at low-temperature to cubic () at high-temperature with increasing annealing temperature. The micro Vickers hardness of the as-atomized powder was around 165 Hv, while it decreased gradually to 130 Hv after annealing at 673K, which is still higher than most other fabrication processes.

The optimum route to fabricate nano-sized Fe-50 wt% Co and hydrogen-reduction behavior of calcined Fe-/Conitrate was investigated. The powder mixture of metal oxides was prepared by solution mixing and calcination of Fe-/Co-nitrate. A DTA-TG and microstructural analysis revealed that the nitrates mixture by the calcination at 300˚C for 2 h was changed to Fe-oxide/Co3O4 composite powders with an average particle size of 100 nm. The reduction behavior of the calcined powders was analyzed by DTA-TG in a hydrogen atmosphere. The composite powders of Fe-oxide and Co3O4 changed to a Fe-Co phase with an average particle size of 40 nm in the temperature range of 260-420˚C. In the TG analysis, a two-step reduction process relating to the presence of Fe3O4 and a CoO phase as the intermediate phase was observed. The hydrogen-reduction kinetics of the Fe-oxide/Co3O4 composite powders was evaluated by the amount of peak shift with heating rates in TG. The activation energies for the reduction, estimated by the slope of the Kissinger plot, were 96 kJ/mol in the peak temperature range of 231-297˚C and 83 kJ/mol of 290-390˚C, respectively. The reported activation energy of 70.4-94.4 kJ/mol for the reduction of Fe- and Co-oxides is in reasonable agreement with the measured value in this study.

8 mol% Y-doped powder was synthesized by Pechini method from titanium isopropoxide, strontium nitrate, yttrium nitrate, citric acid and ethylene glycol. A pyrochlore phase-free perovskite powder was obtained by calcining a polymeric resin, which was prepared from a precursor solution, at in an air atmosphere. Low temperature calcination could lead to a fine-grained microstructure. In the case of a solid-state reaction, an extended heat-treatment at high temperature in a reduced atmosphere needed to obtain a single phase perovskite .

In this study, Ti powder was fabricated from Ti scrap by a hydrogenation-dehydrogenation (HDH)method. The Ti powders were compacted by Spark plasma sintering (SPS) and the microstructure andmechanical properties of the powders were investigated. A hydrogenation reaction of Ti scrap occurred attemperatures near 450oC with a sudden increase in the reaction temperature and a decrease in the pressureof the hydrogen gas as measured in a furnace during the hydrogenation process. In addition, a dehydrogenationprocess was carried out at 750oC for 2hrs in a vacuum of 10-4torr. The Ti powder sizes obtained byhydrogenation-dehydrogenation and mechanical milling processes were in the range of 1~90µm and 1~100µm,respectively. To fabricate Ti compacts, Ti powders were sintered under an applied uniaxial punch pressure of40 MPa at in a range of 900~1200oC for 5 min. The relative density of a SPSed compact was 99.6% at 1100oC,and the tensile strength decreased with an increase in the sintering temperature. However, the hardnessincreased as the sintering temperature increased.

In this study, graphite composites were fabricated by warm press molding method to realize commercialization of PEM fuel cells. Graphite composites have been considered as alternative economic materials for bipolar plate of PEM fuel cells. Graphite powder that enables to provide electrical conductivity was selected as the main substance. The graphite powder was mixed with phenolic resin and the mixture was pressed using a warm press method. First of all, the graphite powder was pulverized with a ball mill for the dense packing of composite. As the ball milling time increases, the average size of particles decreases and the size distribution becomes narrow. This allows for improvement of the uniformity of graphite composite. However, the surface electrical resistivity of graphite composite increases as the ball milling time increases. It is due to that graphite particles with amorphous phase are generated on the surface due to the friction and collision of particles during pulverizing. We found that the contact electrical resistivity of graphite particles increases as the particle size decreases. The contact electrical resistivity of graphite powders was reduced due to high molding pressure by warm press molding. This leads to improvement of the mechanical properties of graphite composite. Hydrogen gas impermeability was measured with the graphite composite, showing a possibility of the application for bipolar plate in fuel cell. And, I-V curves of the graphite composite bipolar plate exhibit a similar performance to the graphite bipolar plate.

The surface roughness of Al, Ag and Ni nano-powders which were prepared by pulsed wire evaporation method was quantified based upon the fractal theory. The surface fractal dimensions of metal nano-powders were determined from the linear relationship between In and Inln () using multi-layer gas adsorption theory. Moreover, the fractal surface image was realized by computer simulation. The relationship between preparation condition and surface characteristics of metal nano-powders was discussed in detail.

The effects of particle size on the surface properties of hydro-thermally synthesized barium titanate powders were investigated by means of particle size analysis, specific surface area, SEM, zeta potential and XPS. Particle sizes were measured by laser light scattering and are in the range of 150 to 1100nm. Zeta potential increased with increasing particle size and it was large minus value in the range of particle size from 500 to 900nm, which seems to be related with the dissolution of ion in these particle sizes from the analysis of surface properties by XPS.

Powder library of pseudo four components Li-Ni-Co-Ti compounds were prepared for exploring the composition region with the single phase of the layer-type structure by using combinatorial high-throuput preparation system "M-ist Combi" based on electrostatic spray deposition method. The new layer-type compounds were found wider composition region than the previous report. This process is promising way to find multi component functional materials.

Multilayer ceramic capacitor (MLCC) miniaturization has increased the demand for superfine powder due to its thin dielectric layer. Hydrothermally synthesized powder a pseudo-cubic phase resulting in poor dielectric properties due to size effect and hydroxyl ion inclusion in the lattice. We attempted a superfine (lower than 100 nm) highly tetragonal powder via a solvothermal method without precipitating agent. The lattice parameters and the relative amounts of tetragonal and cubic phases were determined using Rietveld refinement.